IOM - import/export of large number of objects

Similar Questions

• Large number of objects - strange movement

  Hi all

  My current game has a large number of objects in motion (but not too big) - approximately 100 moving on the screen at once.  Most of them are balls and very small enterprises (e.g. 16 x 16). I use the GPU mode.  All images are bitmap images, also I use objects for all pool and my bullets and enemies etc are stored in linked lists (which are faster than the <>vectors).  All the bullets share the same bitmapData.  There are maybe 15 different bitmapData in use.

  In certain situations — usually after the unleashing of a storm of ball any (say 30 balls fly out at once in all directions of the drive)-graphics behave oddly.  The framerate is still high, but some of the bullets will move in a sort of staggered way rather than sweetness.  They will move forward for a bit, slow down or stop and then pull it off once a little.  This tends to happen to the edges/corners of the screen, while the action in the middle is ok.

  If anyone noticed something like this before?

  The only other thing of any important consequence is a bitmapData that covers the entire screen in the background.  It's bitmapData is actually 0.25% of the width and height of the screen and then stretched 400% to adapt.  Whenever an enemy is destroyed "splatte" is displayed in the bg, which then needs to be updated.

  See you soon,.

  Peter

  Sorry everyone. It is my own stupid mistake.

  I followed it it down to my code which removed bullets from the linked list when they left the screen. This would cause the rest of the list is not to treat up to the next section.  With a large number of bullets, leaving the screen at the same time, this produced pretty nifty effects.

• Move a large number of objects from one layer to the other?

  Hi people.

  I created a photo book of HELP CS5. It has a large nuber of pages. However when I created it originally, I forgot to build a series of layers, so all the objects are now in a single layer.

  Now, I want to assign each 2 double page their own layer. I created all the layers that I need, but I think it's a little annoying moving individually, each object in the layers panel, the original to the new layer layer has been assigned.

  Is there anyway that I can move, on the mass, all the objects selected from the original to the new affected layer layer.

  Thanks in advance

  Gary.

  You release the Option/Alt key after the first stage.

  (1) you use Alt-Option when you click on the original layer to select the entire document on the layer.

  (2) then release Alt Option. In the new layer, and drag the square.

  Holding Option-Alt in the 2nd step makes copies of objects in the new layer. Without hold Alt Option, the objects are MOVED, not copied.

• How to replace a name of schema referenced in large number of objects.

  I have the following scenario:
  
  A TEST schema is updated with the PRODUCTION schema. All the objects in the TEST schema now contains reference to the schema (V247) production.
  
  For ex: V247. TABLE instead of V247TEST. TABLE. (Now I want change V247 to V247TEST).
  
  It has more than 1000 objects in the schema, and each object is reference on behalf of schema repeatedly.
  
  I tried manually, but as the schema contains objects ' 1000 ', thus, it becomes tedious work to do.
  
  We use ORACLE 10 g on Windows.
  
  
  Any solution to this problem as soon as POSSIBLE will be really appreciated.
  
  Thank you.

  889075 wrote:
  I just need to replace each occurrence of "V247" to "V247TEST" in all objects in the schema.

  Published by: 889075 on October 4, 2011 09:01

  what you need is a separate test database if you do not have to deal with this at all. Having the same PB when the test of the host and prod scheme is a disaster time. Just one simple step bad to destroy your customer accounts whole. (or anything that is essential to the survival of your organization.)

• Is there a way to adapt to a large number of objects inside and area staggered regularly?

  I am trying to create some simple tilable dirt and I became curious to know if there is a way to take a bunch of circles as in the photo and get them to fit into the square area and be spaced the best, that it may be inside.

  

  Demo in CS3. AutoTrace parameters differ somewhat in CS6, but the same principle.

  

  JET

  pebbles

• How do I export a large collection at various times and have the renumbering be sequential? So, start by importing 1-499 rename, then have the next export pick up 500-599 for example. Thank you!

  How do I export a large collection at various times and have the renumbering be sequential? So, start by importing 1-499 rename, then have the next export pick up 500-599 for example. Thank you!

  To my knowledge there is not anyway, unless start you numbering at 500 the number. It is an option in the export dialog window.

  

• I was trying to import a large number of files on 10 Organizer.  10 Organizer now hangs at the launch.  The Welcome screen appears for a second and then crashes.  How can I fix it?

  I was trying to import a large number of files on 10 Organizer.  Now, the organiser hangs at the launch.  The Welcome screen appears for a second and then crashes.  How can I fix it?  I use desktop iMac with Yosemite.

  mercad611 wrote:

  I was trying to import a large number of files on 10 Organizer.  Now, the organiser hangs at the launch.  The Welcome screen appears for a second and then crashes.  How can I fix it?  I use desktop iMac with Yosemite.

  If the problem is related to a corrupted catalog, try to open the organizer with a new empty catalog.

  Hold down the SHIFT key at the launch of the Organizer. You get a dialog box with the choice to start with a new catalog, or start with a different catalog and even to 'fix' the current catalog. If your organizer starts with an empty catalog, use the option 'fix' on your corrupt catalog.

• How to work with large number of files to a cloud export in Adobe's PDF format

  I have about 1000 PDF files to be converted to Excel.

  What means are optimal (i.e. with less manual intervention) in which I can do these tasks:

  * Download

  * convert

  * Download

  Pointers to a link will be useful. The FAQ page doesn't have this info: FAQ | Export of Adobe PDF

  I found a way to download it via a web browser and convert them via a web browser (with the help of pointing and clicking in the GUI). These methods REQUIRE the browser to be open so that the download and conversion happens - and this leads to frequent crashes / freezing of the browser windows while download / convert several files at once.

  How background sync (i.e. as in Dropbox or box etc, in which I save the files in a folder and it automatically syncs in the background) for uploading / downloading files?

  It would be great if someone can point out a optimal workflow / recommended for (conversion) handling a large number of PDF files using Adobe Document Cloud export in PDF format

  There is no best or recommended workflows. It is not designed for $ 20. Not even the product of Acrobat $500 would be 1000 PDFs without pain, but it would be a little better.

• After you have moved a large number of emails in a new folder, number of emails that are unrelated in time and the topic themselves grouped into son

  Recently, I moved a large number of emails (filtered by sender) in a new folder I created in Thunderbird.
  The emails themselves arranged in threads that are independent of any discernible factor. Some e-mails with 7 years in dfference are strung together. Also, date / reception function triage is not properly sort, IE the new emails are not at both ends of the sort, nor in the nets. Once again, no visible trend.
  I checked on gmail, where emails are hosted, and none of these issues is apparent.
  It's important questions to find emails, especially since when I enter a search term in the filter and it has no result, but then generate results when I use the search function.

  OK, right click on the folder, select properties and then repair. Just in case that helps.

• How to create an application for a large number of version Blackberry?

  I am doing a project for a large number of Blackberry version (9100, 9330, 9650, 9800, 9810, 9850). And it is difficult to define the position of button, label... for the other version. Can someone give me some tips to create quickly and easily.

  Thank you very much.

  --------------

  I don't think that there is a quick answer to this question.

  An option to help you is to determine the actual size of the font that you use and do you manage screen objects on this basis.

  In addition, you can use relative positions for page layout.  And you must factor into the question about whether you're on a touchscreen device (and thus make easier to hit fields).

  But really if you do not want to create a specific format for each form factor, you must compromise and try to design a screen that works well on all devices.  This will depend on the screen, so there is not one right answer.

  I'm sorry.

• Model import/export

  My client has a 4.0 (3) of the unit in operation. They will install 4.0 (4) and want to reuse their model information in the new system. Y at - it any possibility to import/export selectively items such as patterns to avoid work and possible errors involved in manual recess? As far as I see it, there is no, but I thought that I would try to find out. Thank you

  No, the backup and restore as dirt and FullDBImport/Export tools are 'all or nothing' back ups, you can just backup some objects and restore them on a server of the target unit. The connections between the different means of objects (i.e. models link to class of Service and call managers and schedules etc.) you can't easily just cart around them, by themselves. It's a little more complex than it looks.

• Template Import/Export using webcenter Portal Builder

  Hello world

  I use Jdeveloper version 11.1.1.7 with extension 11.1.1.8 Jdeveloper and Wenter Portal version 1.7

  I created a page template in the portal Builder. I am trying to download this workflow in my Jdeveoper using Webcenter Design spaces. I don't know what are the changes to the properties file

  Can someone explain to me what are all properties should be changed or amended/updated in the config.properties for import/export model of custom page of Portal Builder for Jdeveloper

  Thank you

  Ravi

  This link can help u

  Implementation of Oracle JDeveloper for WebCenter Portal Asset Development

  I'm also paste file config.prop mine for your reference.

  ----------------------------------------------------------------------------------------------------

  Properties of #My

  #CUSTOMER - all properties must be provided the eigenvalues

  #Fri Jul 30 00:00:00 PDT 2010

  # User inputs.

  # Enter the base directory where JDeveloper is installed.

  # For example:

  # On Windows, if JDeveloper is installed in the directory

  # C:\MYJDEV, enter the path as: C:\\MYJDEV

  # On Linux, if JDeveloper is installed in the directory/scratch/MYJDEV,.

  # Enter the path as: / scratch/mywork/MYJDEV

  # Note that the JDeveloper directory contains other folders such as jdeveloper.

  # wlserver_10.3, modules, and so on.

  JDeveloper.Install.Home.Directory=C:\\Oracle\\Middleware\\

  # Enter the executable wlst

  # For example:

  # On Windows, wlst.cmd

  # On Linux, wlst.sh

  #wlst.executable = wlst.cmd

  WLST. Executable = wlst.cmd

  # Enter the absolute path of the DesignWebCenterSpaces project.

  # For example:

  # On Windows, enter the path as:

  # extending.spaces.home.dir=C:\\JDeveloper\\mywork\\DesignWebCenterSpaces

  # On Linux, enter the path as:

  # extending.spaces.home.dir=/scratch/mywork/DesignWebCenterSpaces

  Extending.spaces.Home.dir=C:\\Users\\vinayk\\mywork\\DesignWebCenterSpaces

  # Enter the path for the executable ojdeploy

  # For example:

  # On Windows, enter the path as:

  # oracle.jdeveloper.ojdeploy.path=${jdeveloper.install.home.directory}\\jdeveloper\\jdev\\bin\\ojdeploy.exe

  # On Linux, enter the path as:

  # oracle.jdeveloper.ojdeploy.path=${jdeveloper.install.home.directory}/jdeveloper/jdev/bin/ojdeploy

  #oracle.jdeveloper.ojdeploy.path=${jdeveloper.install.home.directory}\\jdeveloper\\jdev\\bin\\ojdeploy.exe

  Oracle.JDeveloper.ojdeploy.Path=${JDeveloper.Install.Home.Directory}/JDeveloper/jdev/bin/ojdeploy

  # Enter the port number on which runs the Console of Administration of WLS.

  # The URL for the Administration Console contains the port number.

  # For example: http://myhost.com:7001 / console

  WLS.port = 7001

  # Enter the host computer on which the application of spaces is running and where

  # the custom shared library must be deployed.

  WLS. Host = WebCenter.Oracle.local

  # Enter the number of host and port on which runs the application of spaces

  # For example, if the application spaces runs to the: http://myhost.com:8888 / webcenter

  # wc.host = myhost.com, wc.port = 8888 and wc.protocol = http

  WC.port = 8888

  WC. Host = WebCenter.Oracle.local

  # Specify if spaces URL protocol is http or https.

  WC. Protocol = http

  # For reasons of security, information name and password for the administrator user

  # are stored in secure files.

  # Get the location of these files secure with your systems administrator

  # or run commands WLST to generate these files as follows:

  ##   1. Navigate to: WC_ORACLE_HOME/common/bin

  ##   2. Enter the command: wlst.sh

  ##   3. The WLST command prompt, connect to the Administration Server

  # for Oracle WebCenter:

  ##        connect('','', ':')

  # Where admin_user is the user name of the administrator, admin_pwd is

  # the administrator password, the host is the WebCenter instance and port is

  # the port of the Administration Server.

  ##  4. Run the following command to create a user configuration file and the key file

  # to a specified location:

  # storeUserConfig('', ')

  # Where userConfigFile is the name and location of the file that stores the information of the user

  # and userKeyFile is the name and location of the file store passwords.

  # For example:

  # storeUserConfig ("C: / myFiles/myuserconfigfile.secure ', 'C:/myFiles/myuserkeyfile.secure'")

  # For example:

  # On Windows, enter the path as:

  # wls.userkey=C:\\JDeveloper\\mywork\\ps1userkeyfile.secure

  # wls.userconfig=C:\\JDeveloper\\mywork\\ps1userconfigfile.secure

  # On Linux, enter the path as:

  # wls.userkey=/scratch/myfiles/ps1userkeyfile.secure

  # wls.userconfig=/scratch/myfiles/ps1userconfigfile.secure

  # Use the wls.userconfig property to set the path of the userConfigFile and

  # the wls.userkey property to set the path for the userKeyFile.

  WLS. Take is C:\\myFiles\\myuserkeyfile. Secure

  WLS. UserConfig is C:\\myFiles\\myuserconfigfile. Secure

  # Enter the target on which the shared library must be deployed.

  WLS. Target = WC_Spaces, adminserver

  # Enter the target on which the webcenter.ear file must be deployed.

  WLS. WebCenter.app.Target = WC_Spaces

  # Enter the name of the application of spaces (webcenter).

  # Get this information from your system administrator or the

  # WLS Administration Console as follows:

  ##    1. Connect to the Console of Administration of WLS.

  ##    2. Access deployments > webcenter > overview

  # Name of the application the poster here.

  WebCenter.app.Name = WebCenter

  # Use the restart.implementation.version.suffix property to override the following default value

  # Version number of implementation implementation of your shared library.

  # You can get the latest version of the implementation of your

  # system administrator or from the Console of Administration of WLS as follows:

  ##    1. Connect to the Console of Administration of WLS.

  ##    2. Access deployments > [your-shared-library-name] > overview

  # The version number displayed here. For example: 11.1.1.2.5

  # The current version of the implementation is the last number, i.e. 5 in this example.

  # The default implementation increments of 1 version whenever you rebuild

  # your shared library (using run the Ant Target > clean-Stadium).

  # You can restart to a higher value if necessary. For example, if the current value is

  11.1.1.2.20 # and you want the next new version to 11.1.1.2.41 rather than

  # 11.1.1.2.21, do it by resetting the property restart.implementation.version.suffix to 40.

  # Note:

  # The first time you run Run of Target Ant > clean-point, the manifestImpl.properties file

  # is created and the manifest.implementation.version property is set to

  # 11.1.1.2.1. This initial version number is derived from the default.implementation.version

  # in build.properties (11.1.1.2) and added to the property restart.implementation.version.suffix below.

  # For example, if the restart.implementation.version.suffix is set to 1, the initial report

  # manifest.implementation.version will be 11.1.1.2.1.

  # In later versions, the restart.implementation.version.suffix and the lastNumber property

  # in manifestImpl.properties are compared, and the largest of the two numbers is incremented by 1.

  # If, for some reason, the manifestImpl.properties file is deleted, the file is re-created the next time

  # run run the Ant Target > floors to clean and resets the version of the implementation by the

  # restart.implementation.version.suffix only (as if for the first time). For example, 11.1.1.2.1,

  # If restart.implementation.version.suffix = 1

  restart.implementation.version.suffix = 2

  restart.implementation.version.suffix.Ear = 2

  -----------------------------------------------------------

  You need to generate the secure file... See here in this link

  http://www.techartifact.com/blogs/2013/04/generate-the-secure-files-in-WebLogic-in-WebCenter-spaces-applicaton.html

• import/export page

  4.2, 12 c Oracle Linux Oracle APEX.

  I worked a request and had a problem.  I moved it to apex.oracle.com so that you, the experts could see my problem.  One of you did, THANK YOU, and now I want to go back the page assigned to my local workspace.  I tried to export the page and got a sql file on my local machine.  When I tried to import it, I got an error:

  This page has been exported from another application or application in the different workspace. Page cannot be installed in this application.

  
  

  Then I exported the application full apex.oracle.com (an abridged version of my original CD) and it imported successfully to my local workspace.  I then exported fixed a problem page, deleted the page of my original app (there were the same number of page) and I tried to import it.  I got the same error when importing.

  
  

  How to get the beautiful new and well functioning page again in my original application?
  

  HustlingHare wrote:

  4.2, 12 c Oracle Linux Oracle APEX.

  I worked a request and had a problem.  I moved it to apex.oracle.com so that you, the experts could see my problem.  One of you did, THANK YOU, and now I want to go back the page assigned to my local workspace.  I tried to export the page and got a sql file on my local machine.  When I tried to import it, I got an error:

  This page has been exported from another application or application in the different workspace. Page cannot be installed in this application.

  Then I exported the application full apex.oracle.com (an abridged version of my original CD) and it imported successfully to my local workspace.  I then exported fixed a problem page, deleted the page of my original app (there were the same number of page) and I tried to import it.  I got the same error when importing.

  How to get the beautiful new and well functioning page again in my original application?

  Page level import/export using the App Builder is possible between separate instances where the request and workspace have the same ID.

  It can be done in SQL * Plus, or using SQL Developer apex_application_install API, but generally it is easier to simply import the entire application and copy the page between applications. To a page in the application, select Create > new page as a copy, copy the apex.oracle.com application page.

• Import/export with the exception of security deployment manager

  Hello

  I'm getting following error, while trying to open the link export in Deployment Manager. (Browser: Firefox/IE/Chrome)

  Missing required permissions appear in the main container:

  http://Server1.com:14000/xlWebApp/ClientClassServlet/xlWebApp/detect.jar

  I also tried this link but no help. Any help.

  Unable to access the deployment (OIM11gr2ps1) Import/Export Manager

  Thank you.

  Find the java configuration and Security tab, click edit click and list of sites add button in pop.

  Add http://server1.com:14000/xlWebApp/ClientClassServlet/xlWebApp/detect.jar in it.

  Disconnect and reconnect in IOM and try again.

• need to convert a 6 000 pdf to Excel files. How to convert a large number of PDF files at once

  Have a large database of PDF reports I need to export to Excel in order to build a searchable database effectively

  Can I do in Acrobat in large volume and just leave the machine agree with it or not.

  Acrobat Pro has 'actions', but they are designed for the automation of the light trucks. I recommend you do not more than 200 at a time, leaving Acrobat between each of them.

  However, I must comment on the premise. Conversion to Excel is a very uncertain task, based on conjecture and rarely is exactly what is needed. Individual inspection of each file Excel with adjustment, rejection or leisure is usually considered a must.

  If you have a large number of identically to the PDF format, you must look or an application that is designed to extract based on this provision, rather than leaving to the conjecture of the commission.