IOMEGA ScreenPlay Director error 12

Similar Questions

• I just posted a long question about recording on an Iomega Screenplay Director using the media library and the content is not visible when I try to watch on my TV. The question seems to have disappeared.

  The idea was to load an Iomega 2 TB disk with lots of movies to the computer by using the Media Center tuner. and then connect the Iomega to the TV and watch the movies at my ease. Unfortunately it does everything just

  Hello

  I suggest you to contact IOMega to improve assistance in this regard.

• Windows 7 does not recognize my iomega screenplay mx

  Windows 7 does not recognize my iomega screenplay mx, anyone know where I can get the correct driver, as it is supposed to be plug-and-play?

  Hello

  Thank you for contacting Microsoft Answers.

  Your computer shows signs of a new hrdware be connected? If so, try the following:

  Click Start-> right-click computer-> click Manage-> under storage in the left pane, select disk management. You will find all the storage devices connected to the system. If your device is present, right-click the disk, click "Change Drive Letter and paths". Now click on add to add a letter to the reader. Click Ok. Your device should now be accessible.

  If you do not see the device, contact Iomega support.

• Back up and Restore Center - unable to save external hard drive Iomega - get code error 0 x 800700022

  Hello
  I used my external hard drive (Iomega) once, about 8 months ago to save the files on m y HP laptop.  I tried these last days to support again (I know, I should have backed up regularly!), but whenever I try, I get the message that I get an error code 0 x 800700022

  I have Windows Vista on my laptop. I don't know what you need to know. The hard drive will allow me to recover the files that I have already backed up to it, I can just put more on it.

  I hope someone can help me, thanks!

  Kristy

  Hi Kristy,

  1. have you as any message with the error code?

  Step 1:

  I suggest that you follow the steps in this article and see if the problem still occurs.

  http://support.Microsoft.com/kb/951002/en-us

  Step 2:

  Check your disk for errors.

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  See also: http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/bff71aac-c78e-42bd-a959-116019c93478

  THIRD PARTY LINK WARNING

  WARNING: Microsoft does not provide any assurance or warranty, implied or otherwise, and is not responsible for the download, you receive from the sites of third parties or support related to the download or the downloaded technology. If you need assistance dealing with third party technology, please contact directly the manufacturer.

• Cannot run Director error code 0 x 80070057

  I am trying to run windows movie maker and when it starts it gives me this code and stops, I reinstalled windows live because that's what he told me to do, but it still won't let me run the Director, TIME PASSES, I need an answer and a solution to my problem.

  Original title: error code 0 x 80070057

  Hi Terri,

  • You use Moive manufacturer built in Windows Vista, or is Windows Live Movie Maker?

  I suggest you first completely uninstall the Windows Live Director on your computer and later to download a new copy of Windows Live movie maker and install it and check if it works.

  Access the link below and follow the steps in the article to uninstall Windows Live Movie Maker.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  After you have uninstalled Windows live Movie maker, restart the computer, download the latest version of Windows Live Movie maker and install it. Link to download Windows Live Movie Maker:

  http://explore.live.com/Windows-Live-Movie-Maker

  If the steps above do not help to solve the problem, you can access the link below and post your question in the Windows Live Movie Maker community that will provide the support you ask.

  http://windowslivehelp.com/forums.aspx?ProductID=20

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Director of scenario: firmware update?

  Hi, is there somewhere a page where I can see versions of firmware available Director scenario?

  Hello

  I do not have this feature, or have something good about it.

  Here, seems to be the assistance of IOmega's LenovoEMC site

  https://Lenovo-na-en.custhelp.com/app/subproduct/p/991

  Also the product specific:

  https://Lenovo-na-en.custhelp.com/app/cust_alp/p/991, 1077

  I noticed other forums post that can give you a few lights

  https://forums.Lenovo.com/T5/Iomega-Desktop-Network-Storage/Iomega-screenplay-TV-link-Director-quot-...

  Here, I also found that there is a firmware 1.4.0.70 version, but I don't know if it's later.

  https://Lenovo-na-en.custhelp.com/app/answers/detail/A_ID/23148/related/1/session/L2F2LzEvdGltZS8xND...

  Concerning

• CD script error

  I was working on a CD of a manual of nursing nursing when my battery died.  I hooked up the computer and restarted the computer.  Tried to work on the CD.  Message appeared: Director error, Script error, continue: Yes/No.

  The questions on the CD are repeated.  Does anyone know how to solve the problem.  I tried to uninstall the program and reinstall it.  It always shows me the script error message.

  Thank you

  Nurse salvation in action,

  1. Are you experiencing a similar problem with any CD on the computer?

  I suggest that you check the CD on another computer or contact the supplier of CD for more information.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Iomega Dx HD scenario is a 1 TB USB hard drive is not detected. USBSTOR.inf_bb2778a0 is Windows Xp SP3.can some a guide miss me on this

  IOmega screenplay reader Dx-1 TB hard disk HD media detects not in Windows Xp with Sp3.

  On the group network appliance is seen with the IP address.
  need USB mass storage device driver USBSTOR.inf_bb2778a0.
  can anyone guide me on this driver download?

  XP should come with the standard drivers for mass storage devices.
  One of the best sites I've seen for USB problems is the following:

  "Troubleshooting for USB Drives.
    <>http://www.Uwe-Sieber.de/usbtrouble_e.html >

  I think that your problem is covered by the paragraph about 1/2 at the bottom of the page titled «Asking XP drivers»

  HTH,
  JW

• Toshiba Gigashot GSC - K40HE HD - playback of MP4 files

  Need help please.

  I have a Toshiba Gigashot GSC-K40HE HD camera and have bought an Iomega screenplay Plus HD Media Player, essentially a hard disk of 1 TB with the ability to play MP4 files that the GSC-K40HE produced through the HDMI cable to my TV. (http://www.iomega.com/support/manuals/hdd2009/scrnplyplus/en/main.html)

  The files have been tranfered successfully at the scenario of Media Player, checked through my cell phone, MP4 files will open correctly.

  However when connecting the screenplay Plus HD Media Player to the TV with the HDMI cable, when you select MP4 files a message appears as "Unknown file" and not only will not open.

  My questions are:

  1. Why will not play MP4 files?
  2 is there a different format they need to be saved in for them to play, if so what those
  3 looking at files in camera HD of GSC-K40HE there is a simultaneous "THM" generated with the MP4 file when a video was taken, what is this and that affect playback via the screenplay multimedia drive?
  4 someone know of a storage device similar to the scenario Media Plus I can just copy and store my videos, plug-and-play through my TV without the above events.

  Look forward to your responses.

  Thank you

  Hey Buddy,

  If you can open the files saved on your laptop videos are ok and it s no video corrupted don't file, so in my opinion, the problem must be the external HARD disk where you store the videos.

  Have you tried different videos not the camera? You should test it with other mp4 files and other types of files to ensure that the external HARD drive is working properly.

  If it of necessary would directly contact Iomega. There may be an update of firmware for this media player or some settings you need to check these videos work.
  I would also try another cable.

• elements of 13 install fails

  I bought elements 13 online and downloaded.  When I run the Setup, I get a message that says: "this is a problem when extracting the files.  Check the available space on the computer and to write to the destination folder.  The disc has 63 GB and the file is write-enabled.  I ran the installer as administrator.  Does anyone have a suggestion?

  Thank you

  No one can tell you anything without the info exact system or other technical details. Usually it's files and other things you don't think of as temporary folders or other system hidden folders. You could wanan give this a look:

  Important directories | Error postal codes of Mylenium

  Preparations for installation. Error postal codes of Mylenium

  Mylenium

• Try to install purchased box.  Alls well until the last window when this message appears. INCONSISTENCY IN THE DATABASE OF THE INSTALLER. RESTART YOUR COMPUTER AND INSTALL IT AGAIN. Fact as stated several times and redisplays but same message?

  Try to install purchased box.  Alls well until the last window when this message appears. INCONSISTENCY IN THE DATABASE OF THE INSTALLER. RESTART YOUR COMPUTER AND INSTALL IT AGAIN. Fact as stated several times and redisplays but same message?

  Run the cleanup tool and manually delete the caps.db file.

  Important directories | Error postal codes of Mylenium

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  When you reinstall, make sure that you run with user privileges sufficient and external tools like virus scanners do not interfere. This is why you have the question in the first place.

  Mylenium

• Installation of CS 4

  I have a copy of CS4 Web Premium, which I am trying to load.  However, after about 1 minute, I get a message "the Installer database is corrupt".  I am on Windows 7, but I think that this is not the problem, as the message very quickly.  Y at - it a link to download the CS4 so that I can activate it by using my serial number?

  Manually remove the caps.db in the folder selections. just running the script is not enough:

  Important directories | Error postal codes of Mylenium

  Mylenium

• Satellite L750 - Director Windows starts with the E945000E error code

  Satellite L750 (PSK1WA-03c00R)
  4gig

  Hello

  Previously, I had windows essensials and used Director!

  I had my hard drive empty and reinstalled Windows 7 and some web Toshiba drivers to start all over again!

  I have redownloaded Movie maker and now get this error message "error code window movie maker c945000e.

  He said that I might need to update my video card driver! Problem is that I can't see all downloads for video card on the Satellite L750 download page?

  I have Intel HD 3000 family video card! But since I've started using movie maker my CPU had slowed down somewhat and was part of the reason restore my hard drive! I think I just have too many things in the background!

  I can do the basic CPU features but a guru IT Im not! Can someone help me or explain what I could do to solve the problem in laymens terms!

  Post edited by: tony73 update of what I use the video card

  Did you notice the same problem when using original Windows 64-bit Home Premium that you got with your laptop?

  Generally speaking, it is Microsoft related question and best explanation to this problem, I found here.

  You have the Australian mobile phone model and drivers download page you can find on http://www.mytoshiba.com.au/support/download
  > I previously had windows essensials and used Director!
  By the way: do you use the same version as before?

• Code error 8024002d when you use Windows Update to install the update of security for Director 2.6 for windows vista

  I get the error code 8024002d message when you use Windows Update to install the update of security for Director 2.6 for windows vista. It try to install then a window pops up saying: he cannot locate a file called "MM26_ENU [1] .msi '. I have serached my PC and no such file exisits. Grateful for any help. This is supposed to be an update of important safety for Movie Maker.

  Alan McC
  Do you have other accounts of users on this PC?  If you install this update from the main account?

  You should get the number of the update of the updated history list and then download the file here: Microsoft downloads.
  If sure that nothing else is running, and then install the update manually.  Give it a try and let us know the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error Message Fehler im Director-player

  I just got a new laptop and a software disk came with it.  The disc has several titles of different software available for download.  I downloaded Photoshop, Adobe Premier and others.  I also downloaded the best board games in the world, downloaded from the same disk.  The games worked well.  The next day, when I open the game it is an error message saying: Fehler im Director-player property not found #fieldText Skriptfehler.Weiter?      I tried to uninstall and reinstall.  He moved to find and the game opens partially, but when you click on 'Start', this error message appears.  Can someone help me please?  Thank you

  Hi Korkey541,

  Welcome to Microsoft Windows Vista Forums.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot.

  http://support.Microsoft.com/kb/929135

  (1) perform the clean boot (check the link to perform the clean boot)

  (2) enable half the services

  (3) determine whether the problem returns

  (4) enable half of the startup items

  (5) determine if the problem returns

  (6) repeat the steps above until you find out which program or service is causing the issue

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article http://support.microsoft.com/kb/929135 .

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (i) click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  (II) on the general tab, click the Normal startup option, and then click OK.

  All the best!

  Thank you, and in what concerns:

  Diana D D - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.