IomegaWare Zip 100 drive unit not recognized by the computer of Windows 8

Similar Questions

• pilot missing dvd/CD; drive even not recognized by the computer

  somehow, when I tried to burn a dvd, (windows DVD Creator) the computer seems to have removed its own driver for the dvd drive (I put the disc in, it recognized that it was not a disk supported, put a new one in the drive, and create dvd windows then told me that I need to install a dvd/cd writer to complete my project). the relase button disk would not work after turning in the second disc and always used to work even after that. If I use a pin code manually to open and put a disk in the light lights up recocnizing there is something in there, but that nothing, not even spin the disc. No cd, dvd or all other discs work. Ive tried a few different driver Fixer programs, even those you pay (mender driver, driver detective - no even to recognize the missing driver) and can't seem to find a solution. cd/DVD device does not even appear in "device system' list or lists of material which must show all devices, programs or drivers... also do not show my E: / in my computer, what would be my dvd/cd drive." I tried the "regedit" and could not find the 'filter filter up/down' you are supposed to remove to fix. " filter of upper/lower case is not listed in the options.

  I'm on a hp Pavilion dv6000 and ive tried searching on the site Web of hp and help all forums, with no solution until now...

  Hello

  For the CD/DVD problem start up that convenience store and work down to jump
  nothing. He is even said to continue if the CD/DVD drive is not displayed in Device Manager.
  You are much less likely to solve the problem by a hit or miss approach to try this
  or such. And of course, there may be a material cause.

  The HP forums, ask questions and I hope that those who have had
  the same issues on similar equipment that have solved the issue respond. Only way
  to succeed is to give your best effort.

  HP does not have a lot of online documentation and help diagnostics on their site and those
  could help to resolve some of the questions withour paying for support.

  Back up your data on the device and it goes back out of the box state
  can be one of the best moves to solve the present problems.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Hitachi Touro Desk pro HARD drive does not recognize on the computer of Windows 8.

  Original title: Windows 8 - Hitachi Touro Pro support

  I have a Hitachi Touro Desk pro HARD drive that no longer works since I've upgraded to windows 8 last week. If I leave it connected during startup, windows will not start and if I connect it once started, it does not appear in the Solution Explorer, even if you can hear the disc turns away.

  The HARD drive works on all other computers and operating system, not just windows 8.

  When Microsoft will release a patch for this problem? I really don't want to have to re - install windows 7 so that I can access my files again.

  I have installed Windows 10 Technical Preview version 10049 and connected my drive from 750 GB Hitachi touro in USB 3.0 and it WORKS!

  I can't believe that after several years of frustration with this device with Windows 8.1 incompatibility it finally works great in Windows 10! Please check if you also have Windows 10 TP if your Hitachi drive works as well

• HARD drive is not recognized in the installation of Windows 7 settings

  Hello

  I'm trying to install Windows 7 Home premium to my Toshiba Tecra S3 model PTS30E 00Z036DU but when I install Windows 7 after a while he asked me about the witch device to install one must choose a hard drive, but the field is empty then I choose to load the driver, but I put t know which driver I need, I try my HD which is installed on this laptop and I have windows xp who works at the moment on this laptop but it don t accept this one an of my Toshiba CDrom Setup is not a windows 7 looking...

  Can someone help me?
  I've updated the BIOS to version 3.20

  Concerning
  Michel

  The Netherlands

  Hey,.

  I checked the Web from Toshiba site and it seems that you need RAID driver for install Windows properly. The driver is required to get recognized hard drives

  It seems that this driver is available for XP and 2000 only because the laptop is old enough, I think that Yes it doesn't support Vista or Windows 7 I think. You can only try the XP driver. If it doesn t work you must use the operating system preinstalled Toshiba were all working properly! :)

• Satellite 2410-601 - drive is not recognized in 'my computer '.

  Hello
  CD-ROM/DVD-ROM drive
  TEAC DW-224TH-A
  5.1.2535.0 driver version
  If I insert a disk while Windows is loading, it not recognize in my computer. Otherwise, the drive is not recognized in my computer, but I can access the content. Problems occur if I start with a drive that recognizes workstation and then change the drive and computer think it's always the other and problems with AutoPlay.
  My main concern is that the last time this happened he then deteriorated and then the hard drive doesn't quite work and I needed a replacement.
  Is there something I can do? (I could not find a newer driver).
  PS - I own a TOSHIBA Satellite 2410 601.

  Thanks for any help

  Hello

  Did you check device manager if the drive is recognized properly?
  Check it out. In addition, you can try to remove the drive from Device Manager.
  After restarting the OS should recognize the drive again.

• Hard drive is not recognized in the BIOS - Equium A60

  Hi hope someone can help. I have a Toshiba Equium EA60-173 and the hard drive is not recognized in the BIOS. When I remove the hard drive and put it in another laptop it is detected fine. I also tried another hard drive in the Toshiba and that does not work either. So I suspect the IDE controller has disappeared, but can I do to confirm this? I wish there was an option in the BIOS to force detection. I updated the BIOS but still the same.

  This laptop is only just out of warranty, so if it is the controller would I need to replace the motherboard? Are there other options at my disposal?

  Thanks in advance.

  Hi Neil,

  Unless there is some physical\problem with the cable/connector hard drive, then it is most likely that you will have a new mainboard for your laptop. I suggest you to contact an authorized service partner and ask them to check your laptop and give you an estimate of the cost of the repair. Then you can try to shop for less expensive alternatives.

  Kind regards

• DVD player not recognized after the upgrade to windows 8

  I write this to document some odd behavior, that I lived after the upgrade to Windows 8 in the hope that it might save some grief for others.  Of course, if someone could explain why this problem occurs, I'd be very interested/grateful for an answer.

  I recently updated my computer from Vista Ultimate to Windows 8.  I did a clean install of Windows 8, because there is nothing special about the machine I wanted to preserve.  In all cases, the upgrade went without a hitch and I was soon back up with Windows 8 as my OS (I really like, btw).

  The only oddity I noticed after the upgrade is that my DVD drive was not recognized by the operating system.  Remember, this is the same DVD player that was used to install the OS, so I found it rather peculiar.  After a bit of lost time, try software solutions theoretical I started to play with the equipment.

  My motherboard is an ASUS M3A78-EM.  My hard drive is attached to the SATA1 port and my DVD player is plugged into the SATA2 port.  I removed the DVD drive from SATA2, plugged into SATA3, restart Windows 8 (from HDD on SATA1) and Windows 8 now recognizes the drive!

  I thought it was really weird, so I stop, put the DVD on SATA2 drive, rebooted, and the drive was no longer available in Windows 8.

  OK, so I thought that maybe the SATA2 channel was bad (even if he had worked at the Windows 8 DVD installation, just an hour or two before), so I put my HDD on SATA2 and the DVD drive on SATA1.  After doing this, Windows 8 start very well (so there is nothing wrong with SATA2), and it recognizes the DVD on the SATA1 drive.

  OK, so I did that for a while, and virtually all combinations I tried worked as long as the DVD player is not plugged in SATA2.

  I cannot live with that, but thought it was really strange.  Also, I note that the old operating system (Vista) was acknowledging the same DVD player while it was plugged on SATA2.  This leads me to believe that the problem has something to do with Windows 8, but I can't imagine what could be the cause.

  Thanks dude.  After you create this registry key/value and restart Windows 8 was able to finally see my DVD drive on SATA2.  =)

• I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  As one

  I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  So when you try to synchronize the pictures, they are all removed from the ipad and trying to reinstall everything again.

  This may or may not work immediately.  In my case, only half the photos have been installed, and then the error message came that the rest of 9000 can be installed.

  I contacted Apple support team who has made various suggestions.  Subsequently clicking on a photo list in iTunes were all going again and pictures of 9000 then installed.  When I asked the support team what could happen I was told that it was a "glitch".  I don't like seeds they mean that there could be an error in coding somewhere.

  Here me again.  I use an iMac and iPad.  I don't know why XP and iPhone came.

• HP 6510 printer wireless not recognized by the computer

  Original title: HP 6510 wireless printer not recognized by the computer.  Works well before today.  Printer says ity online

  Our HP computer does not find the printer wireless above.  We made the updated IP address, which is correct, have restarted the router, the computer and the printer.  Convenience store is unable to detect a problem

  Hi Karen,.

  -What version of Windows is installed on the computer?

  -What antivirus/firewall software you have installed on the computer?

  The document from HP concerning "printer does not maintain the wireless connection.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02817031#N80

  You have tried most the steps mentioned in the document, but please try once more.

  Additionally, make sure that you disable the antivirus and firewall programs just to make sure that these programs do not block the detected printer.

  Note: You must enable the /firewall antivirus as soon as you've done troubleshooting. If this is not the case, your computer will be vulnerable to viruses.

  Let us know if the steps of troubleshooting mentioned in the link will help.

• Pandigital PANSCN02 scanner that is not recognized by the computer

  I have a Pandigital PANSCN02 scanner that is not recognized by the computer.  Help.
  * original title - programs compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs *.

  Hello

  You can see the Microsoft Windows Compatibility Center, which says that the device has no information about the compatibility in windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&s=Pandigital%20scanner%20PANSCN02%20&type=hardware

  I suggest trying to launch the device in Windows Compatibility Mode and check if it works. See the link below:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope this helps,

• Lumia 710 Nokia is not recognized by the computer

  Lumia 710 Nokia is not recognized by the computer

  Hi sagarxx,

  Have you installed the Zune software?  Take a look on this link down:

  http://www.Nokia.com/us-en/support/product/lumia710/downloads/

  Keep in mind the following:

  Software Zune will not work on versions of Windows prior to Windows XP SP3. Download Windows XP SP3.

  I hope this helps!

• External hard drive is not recognized and the Table to Partition GUID (GPT) partitioning scheme has message is required (-69773)

  Hello!

  I have an external HD that has been unplugued without eject by mistake. Since then, the HD is not recognized by the finder or disk utility.

  When I list the disk in the Terminal, the drive is listed.

  But when I tried to check or repair, a message appears: "failed to check this disc: a Partition GUID (GPT) partitioning schΘma Table is required (-69773).

  I can access the files using programs such as Seagate File Recovery, but I want to extract data and repair the disk without using 3rd party software.

  Is this possible?

  If you have access to the files - a possibility would be to get the files off the disk and then reformat using disk utility

• HARD drive is not recognized on the Satellite 2800 200

  Hello

  First of all, I'm Dutch so I hope that I do not have too many mistakes in my English writing.

  I bought a 2800-200 Satellite at a friend's House. This laptop has a problem.
  When it is started is says "insert the disk in the drive system. Press a key when readya?.

  My bios is ACPI BIOS version 1.80
  In Pheripheral in Bios it says disc hard = not used Mode.

  On page two discs i/o: HARD drive: no drive.

  I tried two hard drives and the two were not working and not recognized in the BIOS.
  I have no CD of restoration.

  My questions:

  What kind of central computer has this laptop?
  Can someone help me with the recovery CD?
  What can I do to fix this?
  How can I change my BIOS so that the HARD drive is recognized?

  My hard drive is MK2023GAS and is not broken. There is nothing on this HARD drive.
  But also with the disk hard 10 GB of origin, I had the same problem.

  I hope you can help me and once again I apologize for my English.

  Hello

  I'll try to help you my friend.

  > When it is started is says "insert the disk in the drive system. Press any key when ready
  This message appeared on my laptop after the HARD disk is dead.
  I had to replace the HARD drive and reinstall the operating system.

  I guess that it of the same problem with your laptop. The HARD drive is not present or not recognized, and you will need to install a compatible HDD for the operation of the OS.

  I have google a bit and discovered that this laptop comes with the 10 GB HARD MK1016GAP of Toshiba drive. It supports the interface ATA-2/ATA-3/ATA-4/ATA-5.

  Please note that many BIOS have a limit of size of HARD drive. This means that not all HARD drive sizes are supported! I assume a 20 GB should be compatible, but this is just my own opinion
  > How can I change my BIOS so that the HARD drive is recognized?
  The BIOS can be modified outside the update (check page driver Toshiba-> Archive-> archive of Satellite).
  But vary important is that you use a compatible HARD drive.

  > Can someone help me with the recovery CD?
  Don t know if you will be able to order this CD at the service provider allowed in your country, because the laptop is really an oldie. But you should ask the guys.
  What you is to install the OS from the Microsoft CD-ROM and then could install drivers needed.

  Greetings

• My Sansdisk flash drive is not recognized by my computer desk

  My disk 32 GB flash drive is not recognized by my office, but it is recognized by my laptop and other devices. In the devices section and printers, it is assigned K:, while my other portable external hard drives and flash drives are assigned J:. My office has at least 3 USB ports that I can reach to, and each of them do not recognize the Sansdisk, which means that it is not giving me the option to auto-play, or to eject the flash disk, it reads... Any suggestions? I'm on Windows 7 Home premium.

  I'm confused.

  - - - - - - - -

  Possible problem 1

  The device is shown in the devices & Printers?  You clicked on this entry & looked at the Autoplay item, or click Browse to see that he had received the letter K?

  But the device is still not displayed in Windows Explorer as a disk?

  Access your room: -.

  Windows Explorer,

  Organize,

  Folder options & research.

  View tab,

  Entries in the advanced settings,

  seventh element empty hide drives in the computer folder

  Make sure this check box is clear, so you can be sure the reader see what is or isn't on it.

  - - - - - - -

  or

  - - - - - - -

  Problem 2

  Explorer Windows shows the drive, but you are just unable to set its AutoPlay options?

• IPod touch 4g not recognized by the computer.

  I have an ipod 4g and it is not recognized by my computer or itunes.  I called apple and used their forums and discovered that when I download itunes apple mobile driver usb is not installed.  Apple told me that it was a windows problem.  so I went to my brothers pc which has windows 7 like mine, downloaded itunes and my ipod could not always be recognized.  the mobile USB driver apple has not been installed on his computer no more.  I went to a friends house and he hooked up to his laptop which has windows 7 and it DOES not recognize my ipod.  After that, I knew for sure it was a windows problem.  can someone help me please?

  PS: when I download itunes, quicktime is not installed for some reason any.  Also my anti-virus could be a problem when I download itunes?

  Hi Karim,

  -Were there any changes made to the computer before the show?

  I suggest you go to the following Help article and check if it helps.

  
  

  iOS: device not recognized in iTunes for Windows

  http://support.Apple.com/kb/TS1538

  Note: The third-party products or services mentioned here are manufactured or provided by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  You can also go through the following link and check if it helps.

  
  

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

  It will be useful.