Hitachi Touro Desk pro HARD drive does not recognize on the computer of Windows 8.

Similar Questions

• New hard drive does not appear in the disk utility

  I am installing a new hard drive in my late 2011 13 "MacBook Pro. I started using apple's online retrieval system and went to disk utility. I tried to format the drive, but he is stuck saying "remove disc" for about a half hour, and then I had a rotation beach ball and could not move the cursor. I restarted the computer and now the drive does not appear in the disk utility. Any help is appreciated as I have no idea where to go from here.

  Thank you.

  You will may be turned off and check that your hard drive is correctly positioned with all the screws tight.

• Toshiba Canvio Basics HARD drive does not appear in my computer

  Hello

  I have a HDTB110AK3BA - Toshiba 1 TB Canvio Plus Portable Hard Drive for storage 3.0 Basics and the computer will allow it to connect, but it does not appear in my computer / pc is in Device Manager thought but not my pc

  Please help and Windows 7 or windows 8.1 PC do the same thing.

  Hello

  I found the description of the product of this external HARD disk:

  Product features:
  • USB 3.0 - powered portable add-on storage.
  • Voltage of bus capable USB, no need for AC adapter.
  • Easy to use with no software to install.
  • Adapts to large digital files with spacious storage capacity.
  • Protect your drive (internal shock sensor and ramp loading technology).

  Specifications
  • Capacity: 1.0 TB
  • Interface: USB 3.0
  • Transfer rate: up to 5 Gb/s
  • Speed: 5 400 rpm
  • Average access time: 12ms
  • Cache buffer: 8 MB

  It is a HARD USB 3.0 drive. No doubt the HARD drive is not recognized correctly in windows exploerer due to the low power.
  The USB 2.0 port common feeds only 500mA. The USB 3.0 device must be able to 900mA.
  Therefore, it would be advisable to connect this 2 ports USB 2.0 HARD drive with a USB Y cable

• Why my data Ext Hard Drive WORD & EXCEL from my old computer does not recognize my new computer with Windows 7.

  Recently, I replaced an old computer running Windows XP with a newer computer of Windows7.

  I have TWO Toshiba external hard drives 2... one of them (Mdl HDDR250E03X) is used for external backup of data on my computer.  I started using it for my old computer that was running on Windows XP.  Due to a Trojan infection, I had to buy a new computer running Windows 7.  I thought that the hard drive is simply a plug-and-play device, BUT my new computer has not recognized that there is a device plugged until someone suggested that I make a change in the Device Management section (which only works at Midway).  My new computer now sees that the drive is there, BUT the data displayed under a name of file/folder (dec22a69bbd43e6966c9935e4720f7).  Data include WORD files, EXCEL files and .jpg files.  When I click on this long file/folder name, I get a long list of records as well as other unknown files that I don't recognize.  Inside each of the files is the SAME set of files (EULA, LocalizedData and SetupResources.dll.  When I try to save a WORD or EXCEL file on this disk, I tells me that the drive is empty, then the path and destination does not allow me to record anything.  I suspect that the problem lies in the Windows 7 software to recognize the hard drive but, I'm totally new to this Windows 7.  Everyone recognizes what is the problem?   I KNOW that the data is always there because I ran my virus on this single drive software and I could see many file names as they were read.

  Hello DuaneMeyer,

  What are you help save external hard disk?
  It is built in the backup part OS backup software or a 3rd?

  Please let us know.

  Marilyn

• Corsair Flash Voyager GT 32 GB USB 3.0 thumb drive does not work after the upgrade to Windows 8 Pro

  Hello

  Since the upgrade of my Windows 7 Ultimate SP1 x 64 Windows 8 Pro x 64, my Corsair travel GT 32 GB USB 3.0 Flash USB key no longer works when plug it into my USB 3.0 port on my laptop. I get an error that the "peripheral last USB connected to the computer has malfunctioned and Windows does not recognize it." I looked for someone with a similar problem and came across this answer:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Sony-microvault-USB-30-8gb-thumb-drive-not-working/8815a9bd-ee62-41EC-8116-a2a03d6f2bbf

  I tried the solution (method 1) on this page, however, Windows reports that it was unable to solve the problem of equipment.

  Is there anything else I can try to solve this problem? The USB key works in the USB ports 2.0, and it worked in the USB 3.0 port when you run Windows 7 Ultimate SP1 x 64.

  Kind regards

  Andreas Ball

  Hey, I contacted Corsair about this, and they say that it's a driver problem in Windows 8 and I need contact my laptop computer manufacturer for the latest drivers for it, but even if my manufactuer are full steam advertising upgrades of Windows 8, they say they do not support it fully yet...

  The host controller my laptop use of USB 3.0 is 'Renesas Electronics USB 3.0 Host Controller'.

  Through Googling, I noticed others have had problems with this host controller in Windows 8, and I can't seem to find a solution for it yet.

  Unfortunately, windows 8 compatibility is not listed then try to install the installer of renesas usb 3.0 in windows compatibility mode 7.

  complete list of supported products and the operating system:

  http://eSupport.Sony.com/us/p/SWU-matrix.pl?upd_id=6382

  Renesas Electronics USB 3.0 Host Controller®
  http://eSupport.Sony.com/us/Perl/SWU-download.pl?MDL=VPCL213FXB&upd_id=6382&os_group_id=6

  Download here: http://s02.download.sony.com/US/pc/RNDUSB-00241028-0042.EXE

  What does this do?

  This utility installs the originally shipped version of Renesas Electronics USB 3.0 Host Controller driver.

  This driver also solves the yellow exclamation point error that can appear in the device as "Universal Serial Bus (USB) Controller" Manager that indicates that the driver is not installed for this device.

  The products and operating systems (view all...)
  Model:
  VPCL213FX/B
  Operating system:
  Windows® 7 64-bit

  IMPORTANT: This file is only for use with the identified models. Not all models are sold in all countries.

  Important notes

  During the installation of this file, be sure that you logged in as an administrator or as a user with administrative rights. To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding. It is strongly recommended that you print these instructions for reference during the installation process.

  Download and Installation Instructions

  To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding. Download RNDUSB-00241028-0042. EXE a temporary of the file or download directory (Please note this directory for reference). Go to the directory where the file was downloaded, and then double-click RNDUSB-00241028-0042. EXE file to start the installation. The "User Account Control" screen, click 'yes '. On the screen "Select Country", select the country for the installation and then click on "next". To the "Renesas Electronics USB 3.0 Host Controller version 2.0.26.0" screen, click "next". The "License" dialog box, read the contract, then, if you agree, click "I agree" to continue the installation. The "Complete" screen, click on "Finish". Installation of the Renesas Electronics USB 3.0 host controller is complete.

• hard drive does not recognize memory stick or inserted disks

  nothing happens with the computer when we put a disk or the memory of my meter stick in the hard drive

  OK... your computer has a media player, you insert the card in?

  If you go to... Start / my computer... There should be one or more readers
  listed as... Removable Disk... These are the slots of the media player.

  If you insert your memory card and do a right click the Removable Disk that
  represents that slot you can choose Explore and see the content of the
  card. From there you can copy and paste or drag and drop the files in a folder
  on your hard drive.

  Also... right click on the removable drive that represents the memory card
  and in the menu... Choose... Properties / Autoplay tab and open the fall
  window and select pictures. And... ICT... "ask me each time to choose
  an action "." Maybe this will restore the AutoPlay window when you insert
  the map.

  You could also try... on the left by clicking on the button "Restore default settings" / apply / OK.

  And... the following link might be worth a visit:

  Download the Microsoft Autoplay Repair Wizard:

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=2648

• Epson printer driver does not appear in the printer & Scanner window

  I downloaded the latest driver for my Epson Artisan 50 printer OS 10.11.5. I ran the installer, and it seems that the installation was successful. But when I am preferences system-> printers and Scanners and click the + to add the new printer, it does not appear in the list 'Add '. How ca I add the driver to my preferences printers and Scanners?

  Mark Romine wrote:

  How ca I add the driver to my preferences printers and Scanners?

  You do not add a printer driver for printers and Scanners.  You add the printer itself.

  The Epson Artisan 50 is not a printer capable of AirPrint, as shown here:

  On AirPrint - Apple Support

  (I have an Epson taking is an AirPrint printer, and it works very well with OS X 10.11.5.)

  The Artisan 50 printer seems (but not scanner) software in the Apple driver:

  Printer and scanner software available for download for your Mac - Apple Support

  Therefore, follow the instructions here:

  OS X El Capitan: Add or remove a printer

• CD DVD drive does not recognize inserted the disc: Code 19

  Windows cannot start the CD-ROM/DVD-ROM device because its information configuration (in the registry) is incomplete or damaged (Code 19). The CD-ROM/DVD-ROM device is a: HL-DT-ST DVD - RAM GH40L ATA Device on an HP Pavilion Slimline

  Hello

  Here are a few articles that will probably solve your problem.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

  Your CD or DVD drive cannot read or write media - A Mr Fixit

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052

  Mark <> Microsoft Partner

• hard drive does not appear in the finder - but on desk

  Hello Hello,

  So I did some mess and it would be wonderful if you can help.

  I tried to make the 'see' an external drive using the privacy setting, but I managed to do away

  ear of the finder. I can see and use it on my desktop and utility disk, but it does not show in finder. What I did do, and how to fix it please?

  Thank you!

  Try to eject, and then unplugging the drive and in him plugging.

  Did it solve this problem?

• Hard drive does not start after the use of the recovery on USB Manager

  The hard drive on HP G62t - 350 CTO Notebook to my newphew failed. I could create a USB recovery in the Recovery Manager. I installed a new 120 GB SSD. The original hard drive was bigger, do not remember now but 250 or 500 GB. I know that the recover the system after the hard is replaced (Windows 7) said "to avoid problems, install a hard drive as big or bigger than the replaced hard disk", but that's a question for later.

  Computer started fine of USB (in fact, is set to boot from USB if present by default). Recovery Manager starts. I choose minimum installation. He goes through the process of partitioning the SSD and copying files. Said so to remove the external media and restart, the computer will restart several times during the process, blah, blah, blah. I get out of USB and restarted, but after POST I get "no bootable media present.

  If I try to reboot, leaving the USB in, it starts in USB and that we are at the beginning. I am able to confirm with a rescue disk, the SSD has an NTFS partition that had Windows files copied to it and a large amount of unallocated space. (Something like 60% / 40%).

  So:

  1. How make bootable hard drive for, and if it was bootable, recovery processes complete?
  2. What is happening with the partitions? He creates the partition recovery first, and then after the start, the recovery partition installs the operating system? If so, I might have to give up this process because since I'm moving to smaller storage, I don't want to devote half of the drive to a recovery partition.
  3. Official recovery media help? A technician told me that he would do so, but couldn't explain to my satisfaction why the USB I created with Recovery Manager does not work, so I'm suspicious of the assertion that the media created by HP as opposed to media created by me using the own HP software would be better, and since the computer is under warranty I don't want to spend $30 + to find out.

  Most of the people who have installed an SSD that was smaller than the reader of the factory were unable to use any medium recovery HP with the SSD.

  As an alternative, if you can still read the 25 characters on the COA affixed Microsoft Windows product key at the bottom of the computer, you can install Windows 7 family, by using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7, create the installation media and install Windows 7 using the product key 25 character of the COA Microsoft on your computer. Please note that this facility is not all customizations of HP or HP value-added that was original installed on your computer. Also note that you will need to download and install most of the pilots of the HP G62t - 350 CTO Notebook PC Drivers page.

  Windows 7 SP1 can be found HERE and HERE.

  Direct link to Windows 7 USB/DVD Download tool. Use this tool to create a bootable DVD or USB Flash drive from windows. ISO

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Hard drive does not appear in the preferences?

  Hello

  I have an external hard drive that I want to use as the scratch disk in photoshop, but it does not appear when I open preferences > performance? My other two hard drives that are connected and mac HD appear well?

  This external drive is properly formatted as a Mac OS Extended ?  It should not be formatted as logged, but it MUST be Mac OS extended.

• Hard drive does not recognize Audio or video disks

  I am running Windows 7. My computer laptop hard drive will recognize the data disks, but will not play the audio or video discs.

  If I plug in a USB hard drive this disc will play all discs.

  Help, please.

  Concerning

  Jon

  Hi Jon,

  This problem may occur after you installed, uninstalled or updated a program, or due to hardware problem.

  1 have had any changes made on the computer before the show?

  2. do you receive any error messages? If Yes, what is the exact error message?

  3. facing this problem with any particular brand of disc?

  4. What is the brand and model of the laptop?

  I suggest you try the procedure described in the article and see if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• HARD drive is not recognized in the installation of Windows 7 settings

  Hello

  I'm trying to install Windows 7 Home premium to my Toshiba Tecra S3 model PTS30E 00Z036DU but when I install Windows 7 after a while he asked me about the witch device to install one must choose a hard drive, but the field is empty then I choose to load the driver, but I put t know which driver I need, I try my HD which is installed on this laptop and I have windows xp who works at the moment on this laptop but it don t accept this one an of my Toshiba CDrom Setup is not a windows 7 looking...

  Can someone help me?
  I've updated the BIOS to version 3.20

  Concerning
  Michel

  The Netherlands

  Hey,.

  I checked the Web from Toshiba site and it seems that you need RAID driver for install Windows properly. The driver is required to get recognized hard drives

  It seems that this driver is available for XP and 2000 only because the laptop is old enough, I think that Yes it doesn't support Vista or Windows 7 I think. You can only try the XP driver. If it doesn t work you must use the operating system preinstalled Toshiba were all working properly! :)

• Drive C does not appear in the computer management window.

  Hello

  In the window of the computer storage management > disk management, I have see my drive C. CD - DVD drive and an external DVD drive only is displayed. C drive is not there. When I look under the disk defragmentation, the C drive is.

  What gives?

  Thank you

  Hello

  Use the Diskpart utility and check if it lists the C drive. Thelist volume command will provide information about each volume in the computer.

  a. Click Start and then click Run.
  b. now, type cmd in the text box and press on enter to open the command prompt.
  c in the command prompt, type diskpart.exe press ENTER.
  d. Enter the following command in the utility diskpart and press ENTER:
  the list volume

  Check if drive C appears in the list.

  See this article for more information about the Diskpart utility:
  http://support.Microsoft.com/kb/300415

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP pavilion g4-1304au notebookpc - HARD drive is not found during the installation of Windows XP

  name of the product - hp pavilion g4-1304au notebookpc

  product no - #ACJ D4X79PC

  processor - AMD A4 - 3330 X

  During the installation of windows XP, it shows an error that the "mass storage is not recognized.

  Please give me Slipstreamer pilot for the specification above.

  You can follow the instructions in the following document, which allows you to install Windows XP on your laptop.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=130&prodSeriesId=5046252&prodTypeId=321957&ObjectID=c01092639

  Also make sure that you install the last Windows XP SP3 for laptops and get into the BIOS and change a SATA AHCI to IDE / legacy mode.

  Also, if there is a parameter called "Secure Boot", disable it.

  I hope this helps.