IOS 10 problems

Similar Questions

• Update Verizon iPhone 5 new IOS 10 problem: cannot receive/send calls. Shop Verizon says it's an update causing Apple to popular phones to crash all day. Any input or advice, please?

  Update Verizon iPhone 5 new IOS 10 problem: I can't receive/send calls. The store Verizon says it's phones a popular causing update Apple crash all day. Any input or advice, please?

  Don't you say no service at the top?

• 10 IOS bluetooth problem

  Before you upgrade to IOS 10 both Iphone5s and 6 s more, bluetooth in my Nissan Murano 2013 worked perfectly. Now, pairs of thin phone and able to call but Bluetooth drops out when receive call and it happens on both devices IOS 10.

  Walks through the internet and we have tried all the recommendations to reset and re-pair the Bluetooth on the system of the car and the Iphone, but nothing helped.

  The following steps have been tried but compensate.

  1.

  -Forget pairing Iphone and car, turn off Bluetooth (reset Press Home + Power device)

  -Restart the car and re - pair again

  2.

  -Forget pairing Iphone and car, turn off Bluetooth (reset all settings)

  -Restart the car and re - pair again

  Borrowed from my friend Iphone5s who do not have upgraded to IOS 10 and paired the car and bang works perfectly.

  Someone else has the same problem?

  Hello

  See if there is something in this support article, you have not yet tried > get help to connect your iPhone, iPad or iPod touch with your car radio - Apple Support

• camera update of iOS 10 problem

  Hi all!

  Did an upgrade on iPhone 6 to iOS10. Discovered that the camera works very badly. When you access the camera on the lockscreen, he hangs up. After the launch, the camera shows black screen or static blurred image on the picture frame. Change for recording, the camera begins sometimes to work. Then switching to the definition, work badly the recording settings are working a little bit better but still frequently hang up pictures. It is the same for access to the phone after having unlocked the phone. Hasn't done anything on the material and everything worked fine before the upgrade. What can we do about it? Think without decommissioning once again, so that the camera works normally again. Need to use it a lot.

  See you soon!

  Hey snail_mail,

  Thank you for using communities Support from Apple. I can see from your post that you are having problems with your camera since the upgrade to iOS 10. Having a camera work is part of a great smartphone experience so we would like to help with this. I have included a link below which has some troubleshooting tips to help make it work normally again.

  Get help with the camera on your iPhone, iPad or iPod touch

  ​

  Let us know if this helps

  See you soon.

  ​

• Display PDF in iOS 10 problem

  After the passage in iOS10 on my iPhone 6s, iPadPro 9.7 "and the iPadPro 12.9" I was shocked to see that a large part of my PDFs isn't is no longer displays correctly.

  I have thousands of scanned documents, containing the text + image in compressed PDF format. Until iOS9, they were posted correctly in each version of the iOS, just as it should, and as they also in each program PDF on my Windows 7 PC. But in iOS10, they appear with letter completely blurred, as if the fonts were displayed twice (image + text), but lines out of alignment. The fuzzy text is hard to read.

  This blurry text in ALL my scanned documents appears in ALL known PDF reading apps: start with iBooks app Apple own, GoodReader, Documents to Readdle, PDF Reader or apps like Expert PDF and tastes, until import into apps like good Notes, etc. More Notes of note-taking.

  I use my PDF files in a professional, not only for private use and this bug is a disaster and a complete no go any professional use IOS devices.

  Apple will have this problem is serious, and can I expect an iOS10 fix soon?

  Apple may provide no work around until then?

  Today, I downloaded an update of two applications of Readdle: Documents and expert PDF:

  I am VERY relieved that this update has resolved the problem, after a terrible week with fuzzy pdfs in all directions!

  If so, it seems that the other apps (inluding iBooks own apples) could get a fix in an update soon as well.

• IOS 10 problems, do not install

  Do not install ios 10

  Lost all cellular network connection, only the research/network not aviable

  IPhone 6

  Hello, johrog!

  Thank you for joining the communities Support from Apple! Looks like you are having a problem connecting to your cellular service. I know how important it is that the iPhone is connected correctly. Learn the steps of articles If you can not connect to a cellular or mobile data network. This will give you some great options to solve the problem and be able to use your iPhone!

  See you soon!

• airplay iOS 10 problem

  I have a b & w a5, but I can't find in the mailing list after update to ios10... Why this happens?

  Hey there GDGONGDUI,

  From your post, I see that your iPhone does not display your speaker B & W A5 in the mailing list. Help me to solve this problem, please follow the steps below:
  

  Don't see the AirPlay device you need? Here is what you should check:

  1. Make sure you plug in and switch on the device of airtime you want to broadcast on.
  2. If you are streaming to an Apple TV, make sure that the AirPlay is enabled in settings > AirPlay.
  3. If your Apple TV using Ethernet, * check that the cable is plugged into the router that you use for the free Wi - Fi connection.
  4. On your iOS device, go to settings > Wi - Fi and check that you are on the same WiFi network as your Apple TV or any other AirPlay device.
  5. Check the same thing on your Apple TV (or other AirPlay device):
     • For Apple TV (4th generation), go to settings > network. Make sure you are on the same WiFi network as your iOS device.
     • Apple TV (2nd or 3rd generation), go to settings > general > network. Make sure you are on the same WiFi network as your iOS device.
  6. If you still need help, contact the Apple Support.

  Get help with AirPlay and AirPlay Mirroring on your iPhone, iPad or iPod touch

  See you soon.

• Camera with iOS 10 problema

  I had a problem with my camera because I downloaded the new iOS 10. When I open the camera app / image is extremely dark. Shows a very dark fuzzy picture, but the screen is almost entirely black.  It will be like that until I have hard reset the phone. It's very weird.

  Hi there, Buck65!

  It seems that your iPhone iOS 10 6 s a few problems with the photo app or hardware. I'll be happy to help you understand who he is. Don't forget to test your camera after each troubleshooting step.

  How to backup your iPhone, iPad and iPod touch – whenever I have begin troubleshooting, I have always advised your backup device. It is preferable "to have" a backup for a backup "need."

  1. reset the iPhone settings -, on your phone, go to settings > general > reset > reset all settings. This returns your iPhone settings to their default settings.

  If you don't back up your phone from the beginning, now would be a recommended time to do. You can clear your phone then I want to make sure that your personal information is safe.

  2. use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings - you will need to use iTunes on Mac or PC to completely erase your iPhone. In the settings of the iPhone doesn't that erase your personal information.

  First, select "Set up as new iPhone", but you can skip logging in iTunes and App Store and now iCloud. Test your camera and if you are able to display a clear image, go to the next step.

  3. restore your iPhone, iPad or iPod touch from a backup - follow the steps described in this article to replace your personal information on your phone.

  Have a great weekend and thanks for the use of communities of Apple support!

• iPad update to ios 10 problems

  IPad 2 completely crashed during update to iOS 10, cannot access all the ipad. Connected to iTunes, I tried Ipad2 update, did not work. Once again I tried to restore, did not work. need a solution to the problem.

  Hello. You can find some info on this bug here:

  https://9to5Mac.com/2016/09/13/iOS-10-update-Bricking-iPhones-and-iPads-for-some - users-requires-itunes-to-restore.

  http://AppleInsider.com/articles/16/09/13/failed-iOS-10-installs-force-users-to-plug-into-iTunes-for-restoration-of-bricked-device

• iOS 10 problems with the Mail application

  Dear Apple and community support,

  Here's my problem:

  I have upgraded to iOS 10 on my iPhone 5s this afternoon (September 13), and now I'm not able to open e-mail - Yahoo!, and Gmail. I can receive emails, I'm not able to view the body of these emails. When I press on them, all I see is a blank white page. I can't answer emails either. I can only their flag or remove them. However, I am able to compose new e-mail messages.

  Here are the steps that I've taken to try to solve my problem:

  1. Restarted my phone
  2. Remove and re-add my Mail accounts
  3. Made a backup and a restore full while that plugged into my laptop with the latest version of iTunes.

  I should be grateful if you would help or more information on this issue.

  Thank you

  Emily

  I also have problems with the Mail application.  On my iphone, ipad, and Mac Pro.  I have several addresses, a MSN, another on Go Daddy and Gmail.  I have various weird problems with threads and every day he re-charge my emails, like if I have never read before.  Something is really problematic with Mail.

  Can the people of APPLE, you help me?

• iOS 9.3.2 was released, everyone found iOS specific problems in MDM yet?

  Hello to you great community!

  I just sent an email to all staff at the school, I've been working in, telling people to not upgrade to iOS 9.3.2 still.

  Everyone still found no problem?

  Best regards

  J

  Since yesterday after the update, I can't iMessage anyone with no apple from my iPad device. (where many before).  If they were all ready on my iMessage I can, but cannot make a new message. My iPhone and also my husband doesn't seem to make it sound... Sound off all night hoping it would heal itself mine did, does not.  iPad does not always work for me.  I get messages from everyone on my phone, shows, both MacBook Pro simply no iPad.  All the settings are correct.  Strange?  Someone else? I reframe reset, and of course the iPad is only which does not show in iCloud backup also strange which is on.

• 9.3 iOS safari problem

  I have problem with research on safari and mail lroblems after updating to iOS 9.3, when will it be fixed?

  Hello! This is a common problem and there is currently no permanent solution.

  Try turning off JavaScript under settings - Safari - Advanced.

  Keep patience, I think soon Apple will figure things out.

• IPSec vpn ios - pix problem

  I have a big problem and I don't know what to do. set up a VPN with the following data:

  of the encryotion, md5 hash, dh 1, pre-shared, but when I tried to affermirai the vpn router ios show me this error

  Jul 1 20:50:15.311: IPSEC (validate_transform_proposal): application for conversion not supported for identity:

  {esp-3des esp-md5-hmac}

  Help, please

  show configurations.

• IOS WEBVPN problem: only the LAN access

  Hi, I have a problem with the WEBVPN configuration, the client can connect to the gateway, but it cannot reach the Internet.

  My camera is C877 with c870-advipservicesk9 - mz.151 - 3.T2

  This is my setup:

  version 15.1

  no service button

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  sequence numbers service

  !

  hostname C877

  !

  boot-start-marker

  start the system flash c870-advipservicesk9 - mz.151 - 3.T2.bin

  boot system tftp c870-advipservicesk9 - mz.151 - 3.T2.bin 192.168.10.254

  boot system ROM

  boot-end-marker

  !

  !

  logging buffered 9000

  enable secret 5

  activate the password

  !

  AAA new-model

  !

  !

  AAA authentication login local_authen local

  AAA of authentication ppp default local

  AAA authorization exec local local_author

  AAA authorization network default authenticated if

  !

  !

  !

  !

  !

  AAA - the id of the joint session

  !

  Crypto pki token removal timeout default 0

  !

  Crypto pki trustpoint TP-self-signed-966267525

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 966267525

  revocation checking no

  rsakeypair TP-self-signed-966267525

  !

  !

  TP-self-signed-966267525 crypto pki certificate chain

  certificate self-signed 01

  quit smoking

  dot11 syslog

  no ip source route

  !

  !

  !

  dhcp client-local IP pool

  network 192.168.10.0 255.255.255.0

  Server DNS 192.168.10.1

  default router 192.168.10.1

  !

  !

  !

  IP cef

  name of the IP-server 213.205.32.70

  name of the IP-server 193.43.2.1

  inspect the IP udp DEFAULT100 name

  inspect the name DEFAULT100 rtsp IP

  inspect the IP name DEFAULT100 nntp

  inspect the IP rcmd DEFAULT100 name

  inspect the IP icmp DEFAULT100 name

  inspect the IP name DEFAULT100 esmtp

  inspect the name DEFAULT100 ntp IP

  inspect the name DEFAULT100 streamworks IP

  inspect the IP name DEFAULT100 ftp

  inspect the IP name DEFAULT100 realaudio

  inspect the name DEFAULT100 tftp IP

  inspect the IP name DEFAULT100 netshow

  inspect the tcp IP DEFAULT100 name

  inspect the IP name DEFAULT100 sqlnet

  inspect the name DEFAULT100 vdolive IP

  IP ddns update method sdm_ddns1

  HTTP

  maximum interval 28 0 0 0

  !

  IP ddns update method net_client

  DDNS both

  !

  No ipv6 cef

  !

  Authenticated MultiLink bundle-name Panel

  !

  VPDN enable

  !

  VPDN-Group 1

  ! PPTP by default VPDN group

  accept-dialin

  Pptp Protocol

  virtual-model 1

  tunnel L2TP non-session timeout 15

  !

  !

  !

  username secret privilege 15 5 user

  !

  !

  property intellectual ssh version 1

  property intellectual ssh pubkey-string

  user username

  quit smoking

  !

  !

  !

  !

  !

  !

  !

  Crypto ipsec client ezvpn SDM_EZVPN_CLIENT_1

  connect the 108 LCD

  key to group users

  client mode

  peer

  virtual interface 2

  username user password

  xauth userid local mode

  !

  !

  !

  !

  !

  interface Loopback0

  IP 192.168.8.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly in

  !

  ATM0 interface

  no ip address

  No atm ilmi-keepalive

  PVC 8/35

  aal5mux encapsulation ppp Dialer

  Dialer pool-member 1

  !

  !

  interface FastEthernet0

  no ip address

  spanning tree portfast

  !

  interface FastEthernet1

  no ip address

  spanning tree portfast

  !

  interface FastEthernet2

  no ip address

  spanning tree portfast

  !

  interface FastEthernet3

  no ip address

  spanning tree portfast

  !

  interface virtual-Template1

  IP unnumbered Vlan1

  PPTP-pool peer default ip address pool

  PPP encryption mppe auto

  PPP ms-chap for authentication ms-chap-v2

  !

  tunnel type of interface virtual-Template2

  no ip address

  no ip unreachable

  IP virtual-reassembly in

  ipv4 ipsec tunnel mode

  !

  interface Vlan1

  IP 192.168.10.1 255.255.255.0

  IP access-group 101 in

  IP nat inside

  IP virtual-reassembly in

  Crypto ipsec client ezvpn SDM_EZVPN_CLIENT_1 inside

  !

  interface Dialer0

  the negotiated IP address

  IP access-group 102 to

  NAT outside IP

  inspect the DEFAULT100 over IP

  IP virtual-reassembly in

  virtual-reassembly IP output

  encapsulation ppp

  Dialer pool 1

  Crypto ipsec client ezvpn SDM_EZVPN_CLIENT_1

  !

  IP pool local PPTP-pool 192.168.10.100 192.168.10.150

  IP pool WEBVPN-pool 192.168.8.100 room 192.168.8.150

  IP forward-Protocol ND

  IP http server

  local IP http authentication

  IP http secure server

  !

  !

  The dns server IP

  P2P nat IP 192.168.1.10 pool 192.168.1.10 netmask 255.255.255.0 type

  the IP nat inside source 1 interface Dialer0 overload list

  IP nat inside source static tcp 192.168.10.252 12000 Dialer0 20101 interface

  IP nat inside source static tcp 192.168.10.251 Dialer0 1723 1723 interface

  IP nat inside destination list 100 pool p2p

  IP route 0.0.0.0 0.0.0.0 Dialer0 2

  IP route 192.168.60.0 255.255.255.0 Dialer0

  !

  logging 192.168.10.254

  access-list 1 permit 192.168.10.0 0.0.0.255

  access list 100 permit tcp any any newspaper of the range 6881-6999

  access-list 100 permit udp any any newspaper of the range 6881-6999

  access list 101 ip allow any host 192.168.10.1

  access-list 101 permit tcp 192.0.0.0 0.255.255.255 everything

  access-list 101 permit udp 192.0.0.0 0.255.255.255 everything

  access-list 101 permit icmp 192.0.0.0 0.255.255.255 everything

  access list 101 permit gre 192.168.10.0 0.0.0.255 any

  access-list 101 deny ip any any newspaper

  Note access-list 102 by vpn pptp

  access-list 102 permit any one

  access-list 102 permit esp all any newspaper

  Note access-list 102 by vpn pptp

  access list 102 permit tcp any any eq 1723 journal

  access list 102 permit tcp any any eq 9998

  access-list 102 permit udp any any eq 9999

  access list 102 permit tcp any any eq 8080 newspaper

  access list 102 permit tcp any any eq 443

  access-list 102 permit udp any any eq 2301

  access-list 102 permit udp any any eq 2304

  access list 102 permit tcp any any eq 2300

  access list 102 permit tcp any any eq 11116

  access list 102 permit tcp any any newspaper of the range 6881-6999

  access-list 102 permit udp any any newspaper of the range 6881-6999

  access-list 102 permit udp any any eq 20101

  access-list 102 permit udp host 192.43.244.18 eq ntp ntp any eq

  access-list 102 permit udp host any eq 10000

  access-list 102 permit udp host all non500-isakmp eq

  access-list 102 permit udp host all isakmp eq

  access-list 102 permit host esp all

  access-list 102 permit ahp host all

  access-list 102 permit everything all unreachable icmp

  access-list 102 deny ip 10.0.0.0 0.255.255.255 everything

  access-list 102 deny ip 172.16.0.0 0.15.255.255 all

  access-list 102 deny ip 192.168.0.0 0.0.255.255 everything

  access-list 102 deny ip 127.0.0.0 0.255.255.255 everything

  access-list 102 refuse host ip 255.255.255.255 everything

  access-list 102 refuse host ip 0.0.0.0 everything

  access-list 102 deny ip any any newspaper

  Note access-list 102 by vpn pptp

  access-list 106 permit ip 192.168.10.0 0.0.0.255 any

  access-list 108 permit ip 192.168.10.0 0.0.0.255 any

  Dialer-list 1 ip protocol allow

  !

  !

  !

  !

  SNMP-server RO community

  !

  !

  !

  control plan

  !

  !

  Line con 0

  connection of authentication local_authen

  no activation of the modem

  telnet output transport

  line to 0

  connection of authentication local_authen

  telnet output transport

  line vty 0 4

  session-timeout 3600

  access-class 106 in

  privilege level 15

  password 7

  authorization exec local_author

  connection of authentication local_authen

  transport input telnet ssh

  !

  !

  WebVPN gateway gateway_1

  interface Dialer0 port 443 of intellectual property

  SSL trustpoint TP-self-signed-966267525

  development

  !

  WebVPN install svc flash:/webvpn/anyconnect-win-3.1.00495-k9.pkg sequence 1

  !

  context_1 context WebVPN

  title "SSL VPN connection"

  color #CCCC66

  secondary-color white

  title color-#ffc800

  text-color black

  SSL authentication check all

  !

  login message "SSL VPN connection"

  !

  policy_1 political group

  functions compatible svc

  SVC-pool of addresses 'WEBVPN-Pool' netmask 255.255.255.0

  SVC Dungeon-client-installed

  SVC-Server primary dns 192.168.10.1

  Group Policy - by default-policy_1

  AAA authentication list local_authen

  Gateway gateway_1

  development

  !

  end

  Have you tried to configure your installation as described here [using a virtual model and configure ip nat inside]

  http://www.Cisco.com/en/us/docs/iOS-XML/iOS/sec_conn_sslvpn/configuration/15-2mt/sec-Conn-sslvpn-SSL-VPN.html#GUID-CA99AAF5-6ABF-4C3D-ABF9-2F56B66D076C

  See you soon,.

• app iPad and IOS 6 problem?

  We use the ipad app OBIEE (version 11.1.1.6.1140) - HD version, against a BP1 Server 11.1.1.6.2. Several weeks ago, when I tested it, it worked fine. However, I went back in today, and NONE of the guests of dashboard work. If you click the prompt, nothing is displayed and there is no way to select a new value.
  
  The only thing I can think is that I upgraded my iPad IOS 6 last week. Has anyone else noticed a problem with this?
  
  Thank you
  Scott

  Yes, we are seeing the same issue. I have an iPhone that has been upgraded and cannot change the page on a dashboard for some pages, but on another device that has not been successfully upgraded, everything seems to work as it should.