IOS mixed Crypto Maps with Checkpoint Firewall

Similar Questions

• iOS 9.3 do bluetooth hands-free connection to my Audi stuttering. Using google maps with instructions of the Tower burn on bluetooth still works very well. It's an iPhone 6. Another 6s to 9.2 iOS iPhone works very well with the hands-free bluetooth.

  iOS 9.3 made connection kit hands free bluetooth to my Audi stuttering.

  Both the speaker and the stuttering/pulse microphone so that you cannot speak/hear.

  Using googlemap-app with instructions of the Tower burn via bluetooth still works very well, his is perfect.

  It's an iPhone 6s and the car is an Audi A6 2010 with the Moose Bluetooth adapter business.

  Another 6s to 9.2 iOS iPhone works fine with bluetooth hands-free, just like my phone before the upgrade.

  I tried to disable the twinning, remove all old in the car and the iPhone and pair Bluetooth devices again.

  Anyone alse experinceing this?

  And tip on how to fix it?

  I have the same problem with Audi Q7 2008 and iPhone-6s - iOS - 9.3.

• No Ping response from Site to Site connection between 876 of Cisco and CheckPoint Firewall

  Hello!

  We try to create a Site-to-Site - connection IPSec between a Cisco 876 (local site) and a control-firewall station (remote site). Cisco 876 is not directly connected to the internet, but it is behind a router ADSL with port-forwarding, redirection of ports 500 and 4500. The configuration of the Cisco 876 running is attached to this thread. Unfortunately, I get no results when debugging the connection with the command "debug crypto isakmp" and "debug crypto ipsec".

  From the point of view of Checkpoint firewall the connection seems to be implemented, but there is no response from ping.

  The server in the local site to be achieved since the network behind the firewall Checkpoint has a routing entry "PEI route add [inside the ip-net Remote] 255.255.255.0 [inside the premises of intellectual property]" (see also annex current config name ip addresses).

  Establishing a VPN Cisco Client connection to the same router Cisco 876 works very well.

  Any help would be much appreciated!

  Jakob J. Blaette

  Hi Jakob,

  Add my two cents here.

  You should always verify that the following ports and Protocol are open:

  1 - UDP port 500--> ISAKMP

  2 - UDP port 4500--> NAT - T

  3-protocol 50---> ESP

  A LAN-to-LAN tunnel will never establish a TCP session, but it could use NAT - T (if behind a NAT). Remember that a single translation isn't a port forwarding, a LAN-to-LAN tunnel is not good unless you have a one-to-one translation of the NATted device, which I think, in your case the router is working.

  HTH.

  Portu.

  Please note all useful messages and mark this message as a response.

• role of the crypto map sequence number

  I'm setting up IPSEC in four sites in a manner completely mesh. The problem I have is one of the sites is our main hub and everything works on a class B network. Creating ACL to get from one place to another is relatively simple, but getting a site on the main hub is another story, because other sites are all the subnets in the class B address, I have to remove these subnets of a class B and at the same time to encrypt the rest of the class B address. Subnets of the smaller sites are for most of the 24 and 25. I was wondering if the sequence # in the card order crypto could play a role for me. If I set the priority on small sites and put the lower on the map pointing to the main pole encryption could I get away with something like this:

  licence (local subnet) 0.0.0.255 x.x.x.x where x.x.x.x (category B) 0.0.255.255

  Thanks in advance for taking the time.

  Mario

  Mario... that's exactly how it works for the two ISAKMP Crypto map policies and policy. It will look at the lowest number (like attentive) so if you do your remote sites all a higher priority (lower number), then you should be fine with respect to the central site.

  Kind regards

• Dynamic Crypto map & Defaultl2lGroup

  Dear all,

  How Defaultl2lGroups & dynamic crypto of the cards can be configured in an asa.

  Why I need?

  All our stores because asa 5505 (with dynamic ip addresses) are connected to the network head asa 5550 via dynamic vpn and headboard has 2 ISPS.

  In fact, we have two lease lines a primary and another backup. Surprisingly, we have only a single subnet on the inside. Now that the main link BW is fully occupied. I want to use the help link too. I wonder if I can have several dynamic cryptographic cards & several groups default tunnel. While I can define servers in one vlan and users in other VLANs. and with two dynamic crypto & default tunnel grps I think passing a subnet (part of the 1st dynamic default crypto & 1 tunelgrp) and second subnet on the other link (2nd dynamic crypo & 2nd tunel default grp). This way the user vpn and internet traffic wil go through 1 link and vpn servers and internet traffic will pass through second link as both the subnet vpn will have another link as backup to each other.

  Please provide us with the possibilities.

  Please share your ideas.

  Help, please.

  Thanks in advance,

  Kind regards

  Jean Michel

  Hi Sr,

  1 default policy

  Up to 65535 crypto map entries (including static and dynamic)

  Be sure to note all the useful messages.

  For this community, which is as important as a thank you.

• Difference b/w PIX & router (router with the firewall option)

  Hi all

  I want to know that how we can differ with router (router with the firewall option) PIX bcz can also make Staefull packet filtering. What PIX device that reviewed by the customer to use PIX of the router.

  Thank you best regards &,.

  Guelma

  Hello

  There is a discussion in this forum on this topic; Check "Firewalling: PIX vs IOS Firewall" last conversation was released January 10, 2006. Let me know if it helps.

  Rgrds,

  Haitham

• 2 crypto maps to the external interface? Possible?

  Hi, I have a little problem with a PIX 515 UR on FOS 6.3 (1).

  What I'm trying to do is to run 2 VPN site to site to him. The thing is: although I can get two separate crypt cards into the config, its only the more recent which is active when I do a ' sh crypto his '.

  Anyone have any ideas?

  TIA-

  Gary

  I do multiple like this:

  I have the main Board, applied externally:

  toXXXX interface card crypto outside

  Then, I build maps more screaming like ACL if:

  toXXXX 20 ipsec-isakmp crypto map

  card crypto toXXXX 20 match address no_nat (name of the ACL)

  card crypto toXXXX 20 peers set x.x.x.x

  toXXXX 20 transform-set mytrans crypto card

  life safety association set card crypto toXXXX 20 seconds 3600 4608000 kilobytes

  toXXXX 40 ipsec-isakmp crypto map

  card crypto toXXXX 40 correspondence address toACME (name of the ACL)

  card crypto toXXXX 40 peers set x.x.x.x

  toXXXX 40 transform-set mytrans crypto card

  life safety association set card crypto toXXXX 40 seconds 3600 4608000 kilobytes

• IOS 10 - new map app - how to find written directions

  IOS 10 - new map app - how to find guidelines for travel written car =

  Hello jsalm,

  Thank you for reaching out to the Community Support from Apple. I would be happy to help you find the instructions written in the Maps app.  Once you enter your destination and started browsing, slide up from the bottom of the screen and select "Details". You will find a list of indications turn-by-turn for your itinerary.

  If you have problems, let the community know. We are all here to help.

  Best regards

• ipad ios 9.3.5 with ios iphone 5s 9.3.5 air pair

  How do I pair ipad ios 9.3.5 with ios iphone 5s 9.3.5 air

  An iPhone will pair not via Bluetooth to a computer (Mac or Windows) or personal iPad except hotspot and then only if your cell phone plan he supports. See below for more information. https://discussions.Apple.com/docs/doc-7722

  If you try to use the procedure of transfer/continuity or AirDrop, which does not have Bluetooth but devices don't are NOT matched. Bluetooth must be just on and the devices within range of the other. The following may help in problems of transfer/continuity: https://support.apple.com/en-us/HT204678

• How to use iCloud for Windows if I don't have a fisrt iOS device sign in with?

  I lost 135 MB of download capacity for iCloud for Windows, so I can participate in the program of sharing with my children, to see the miserable piece of software I have to first sign with an iThingee, which I did and refuse to buy.  This makes iCloud for WIndows USELESS!  Ther3e anyway for me to activate iCLoud for Windows WITHOUT either one) fouling up to iThingees of my children by making them sign me on my Apple account and then re - configure their machines to RETURN on their own AFTER I get iCloud for WIndows goes on my Surface or b) purchase of an iThingee that I refuse categorically to buy?

  As you found, family sharing requires a Mac or an iOS device to start with. You can read this information on the use and configuration of the sharing of the family. Implement the family share - Apple Support  You can't use it on the Windows computer until it is configured on an iOS or Mac device.

• is possible to use either usb 6353 map with Matlab 2010A

  Hello

  On a bought a NIUSB 6353 map, but in my computer don't I i the 2010 version of Matlab. Is there a way to control this version of this map with MATLAB

  Thanks in advance

  Hello

  And thanks for posting here.

  Please write in English if you post here. Otherwise, post on the french forum.

  NI USB-6353 using the DAQmx driver, it must be used with Matlab.

  You will find several links from the NI USB-6353 by clicking here.

  And presents an additional link showing you how to use your device with Matlab: Introduction to NOR-DAQmx with Matlab tools

  Kind regards

• What is MSE protecting with a firewall?

  My Norton 360 expired recently... Decided not to renew and now have MSE...  Noticed today that my firewall is not enabled...  MSE protect my Pc with the firewall? If this is not the case, what can I do? Also is there anything else I might need to add.

  Really need help, I'm not aware of pc.  Have windows 7 64 bit...

  Moved from feedback

  Original title: fire wall?

  Go to the control panel and turn on the Windows Firewall.

• Priority crypto map

  Hi all

  I try to have several VPN site-to-site hooked to my Interface Outside one.

  I understand that I may have a crpypto card assigned to the interface.

  If I want to for example, one of virtual private networks to require PFS but either not to do it-just set a different priority under the Crypto map? Map crypro entries get transformed top to bottom until a match is found?

  for example

  CMAP 10 ipsec-isakmp crypto card
  defined peer x.x.x.x
  game of transformation-TSET
  match address ACL1

  Crypto map CMAP 20 ipsec-isakmp
  defined peer y.y.y.y
  game of transformation-TSET
  match address ACL2
  set the pfs Group 2

  Thank you

  You're right, the encryption card is dealt top-down. So if your traffic is ACL2 (and not ACL1!), then all settings configured under sequence CMAP 20 are relevant in this regard.

• access crypto-list with several entries

  Hello

  I need establish a L2L tunnel from a remote location to an ASA5540.

  Guide de Configuration ASA5500 educating to create an ACL extended to connections of control based on the source address and destination and gives the following example: "permit l2l_list of access list range 192.168.0.0 255.255.0.0 150.150.0.0 255.255.0.0.

  All ACL examples that I found is in one line.  In addition, in ASDM you can only specify a local subnet and a remote subnet.

  I can define an ACL includes several lines, one for each local subnet?

  Example:

  extended access list l2l_list allow 192.168.33.0 255.255.255.0 10.0.0.0 255.0.0.0

  extended access list l2l_list allow 192.168.33.0 255.255.255.0 172.16.0.0 255.255.0.0

  The problem I encounter is that users on the remote site should have access not only to the ASA 5540 local network 10.0.0.0/8, but also a few others like 172.16.0.0/16

  albert_coll wrote:
  Hello,
  I need to establish a L2L tunnel from a remote site to an ASA5540.
  The ASA5500 Configuration Guide instruct to create an extended ACL to control connections based on the source and destination address, and provides the following example: "access-list l2l_list extended permit 192.168.0.0 255.255.0.0 150.150.0.0 255.255.0.0".
  All the ACL examples i found consists in only one line.  Moreover, from ASDM you can only specify one local subnet and one remote subnet.
  Can i define an ACL including several lines, one for every local subnet ?
  Example:
  access-list l2l_list extended permit 192.168.33.0 255.255.255.0 10.0.0.0 255.0.0.0
  access-list l2l_list extended permit 192.168.33.0 255.255.255.0 172.16.0.0 255.255.0.0
  The problem i face is that users at the remote site should not only access the ASA 5540 local network 10.0.0.0/8, but also some others like 172.16.0.0/16
  

  You can specify the number of rows that you want in a crypto map access-list. If ASDM, which I use, does not let you then you can certainly do it from the CLI.

  Jon

  
  

  Cisco currently give money to call Haiti earthquake for each side of the sort it please consider note all useful messages.

• Avast free with comodo firewall - READ-

  I read that these two running together will cause no conflict as long as you clear the sandbox in Avast and comodo firewall but my main question is which is the best way to install
  First avast then restart then Comodo firewall or vice versa any help would be thank you very much.

  Hello

  Frankly I run Avast and forget about Comodo or any firewall left 3rd. Use of the Windows Firewall
  that is extremely effective. Most routers today also have a built-in firewall hardware that works
  Well well with Windows Firewall software.

  ---------------------------------------------------------------------------------------------------------------------------

  Low-cost 3rd part firewall software are quite a lot of problems delayed. They all have
  compatibility, issues and offer only a few improved controls. In fact their problems often actually lower
  the overall security instead of laying. The Windows Firewall has no problem of compatibility and is
  extremely safe, if you know enough to work around most of the hype. Cost of firewalls software quality
  thousands. Most routers have hardware firewalls built in and those are much better additions
  for the money than any firewall at low prices and low-cost software.

  How to change the Notification settings of Windows in Windows 7 firewall - see also related articles
  section at the fair before the response section.
  http://www.SevenForums.com/tutorials/523-Windows-Firewall-change-notification-settings.html

  How to manage the firewall of Windows 7.
  http://www.thewindowsclub.com/how-to-manage-Windows-7-firewall

  How do I add or remove a Windows Firewall Exception in Windows 7
  http://www.SevenForums.com/tutorials/542-Windows-Firewall-Add-Remove-exception.html

  How to use Windows Firewall with advanced security in Vista (also Windows 7)
  http://www.Vistax64.com/tutorials/92748-Windows-Firewall-Advanced-Security.html

  What's new in the Windows 7 firewall?
  http://www.windowsecurity.com/articles/whats-new-Windows-7-firewall.html

  How to enable or disable Windows Firewall in Windows 7
  http://www.SevenForums.com/tutorials/522-Windows-Firewall-turn-off.html

  ------------------------------

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leave the file system, Web,.
  Operational network (Script and behavior are also recommended in Ver 6 +).

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 6.x and 4.8 x

  Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y<-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.
  http://www.Malwarebytes.org/products/malwarebytes_free

  I hope this helps. Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.