Switching of the coils

Hey guys im looking for help, my first works fine condtion that I want the coils 1 and 2 to switch, but for condition 2 I want to reset the coils 1 and 2 and pass the 3 and 4, but when I run the coils would you like to state one of the tips. Thank you

Its fine to have it work!

Tags: NI Software

Similar Questions

  • Brother MFC-7420. Usually, it works on Windows 7, it will not print and I have to unload the coil and switch off the printer before Relighting.

    I use a Brother MFC-7420. Usually, it works under Windows 7, but from time to time (maybe 1 in 20 times) he will not print and I have to unload the coil and switch off the printer before Relighting. It is not always the case, but it is enough times to be a nuisance.

    Ideas, people?

    Hello

    This problem occurs when you make changes to the computer?

    Method 1: Diagnose and automatically fix problems printing and printer

    http://support.Microsoft.com/mats/printing_problems/

    Method 2: Refer to this link: I can not print from my computer via the USB port.

     
     

    If you have problems, I haveinstall updated printer drivers, see this link:
    http://www.brother-USA.com/downloads/default.aspx?PgId=5&R3ModelID=MFC7420

    Refer to this: update the drivers for hardware that does not work properly.

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    See also: printer in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    I hope this helps!

  • How can I deactivate permanently "switch to the tab' in the address bar?

    I want to just the address bar to search my default search engine, I don't want other features, including "switch to the tab '. Because this came he messed up my use of location completely bar when I have other tabs open.

    Thank you.

    Hello, jmss!

    1. Go to the menu (three bars icon in the upper right corner and select "Préférences".)
    2. Click on the "Privacy" tab and the substantive change the "when you use the location bar, suggest:" to "nothing".

    That should do it.

  • Use the keyboard to switch to the next tab

    I use ctrl + tab to switch to the next tab.
    But this feature does not work since the first tab, only for all other tabs.

    I have the Menu bar on.
    I use alt + f to open the file menu, and so on for all the menus
    Even this command only works for all tabs except the first.

    I tried the shortcuts that you have provided on my Firefox. They seem to work fine.

    This problem could be due to an extension you installed on Firefox. To see if this is indeed the issue, please try Firefox in Safe Mode.

  • How to stop multiple self-switching to the address bar every time I open a new tab and try typing something anywhere outside the address bar?

    How to stop multiple self-switching to the address bar every time I open a new tab and try typing something anywhere outside the address bar? As something just wants me to use this integrated search when you type something non-Web-address in the address bar and press to enter. And the most ridiculous thing is that happens repeatedly on as every second, as I just got off the address bar and start typing again, but still he passes me in the address bar, then 3, 4 times like that. And the result is that I don't see the address of this page.

    I think that its has something to do with my AVG Antivirus, because it started the same time a Nation AVG started to appear in each new tab I opened (and which is irritating as me, I've read here on support.mozilla.org and it seems that the only solution is to completely reinstall Firefox, but I don't want to lose all my settings) but when I type something in the address bar and press enter It opens the search results in Google.

    Please try to help me, I love Firefox but I have to switch to Chrome until I fix this.

    Thanks in advance

    First of all, please update Firefox 32. 22 is no longer support is not safe. So, let us know if you still have this problem. Update Firefox to the latest version

  • Can not switch to the new AT & T send mail with Fire Fox as the brower

    Internet Explorer works fine. When I use Fire Fox only to & classic E-mail T will work. Even when you click on switch to the new AT & T email is not spending. Download Fire Fox twice. Still does not work.

    Is - what the State of the site which release the current Firefox is supported?

    Clear the cache and cookies only from Web sites that are causing problems.

    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the startup window Mode without failure.

  • BT Yahoo mail will not switch to the new style when using Firefox

    I had to do a re - install under the motherboard has failed. I use BT Yahoo email. On the home page, I get a link "switch to the new BT Yahoo! Mail". That is the link allows to set up the new style and I can then do what the home page and opening in the new style every time. In Firefox help happens nothing other than 'click' navigation and a brief glow and I am still on the old.

    I'm glad to hear that your problem has been resolved.

    If you have not already the case, please mark this thread as solved by the solution of marking.

    This will help other users experience similar problems helps to find faster and more efficiently.

    I hope that you will continue using our products and we thank you for contacting the Mozilla Support.

    Here are the steps to make a clean reinstall for reference.

    Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  • How can I click on a link to open a new tab without switching to the new tab automatically?

    I use my search engine Ixquick. When the result of the research is in place, whenever I click on a link, Firefox creates a new tab and change the focus of the page of search results on the page for the link that I clicked.

    I want to have a new tab created, but I want to stay on the search results page to be able to continue by clicking on the other tabs of interest.

    I'm new on Foxfire and this feature is very useful for me when I used Internet Explorer.

    Any help will be appreciated.

    Hi Kathy

    You can start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the startup window Mode without failure.

  • How to turn off the "switch to the new tab" feature in the bookmarks toolbar window?

    Until you say, no "switch to tab no more" does not solve my problem. Here's the deal, in a site, by clicking on the middle button now opens the tab without switching to it, which is great. My problem is, in general, I use the toolbar bookmarks feature, which has all my favorite sites. I will be typically Middle-click or right click Select "Open new tab" in this toolbar to navigate. The problem is, in doing so, ALWAYS switches to the tab newly opened. So say I want to open all my email addresses into the new table, I click them all, but each click sends me to this new page, no matter what page I'm on. I wish I could disable this and therefore load a string of tabs first and navigate once they have loaded, rather than see the white screen.

    Hello, enter Subject: config in the locationbar to the browser, search for the preference named browser.tabs.loadBookmarksInBackground and switch to true by doublecklicking on it.

  • Don't put the focus on the textbox when switching to the new tab

    Hello

    I use Firefox and I like to browse websites using it.

    But after the update to version 10.0, I am facing problem. The focus is not set to Google search textbox when I open a new tab and click on text box, I have to click another element of Task Manager and then I see the update.

    I am facing this all the days of problem and it happened after updating to this new version, only I didn't face this before.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • How can I disable auto switching between the LCD screen and the viewfinder electronic on Sony A7sii?

    Hi guys,.

    I don't have it if the table on the right, but here's my question...

    Disabling automatic switching between the lcd and the viewfinder on the Sony A7Sii?

    Thanks in advance,

    Zia

    Hi @dslrshooters,

    could you please change your message header to match the content of you post.

    in the A6300, you can change the way in which the camera automatically switches between NET & screen in

    Menu custom (cog symbol): FINDER/MONITOR.

    with a little luck, you have the same menu on the 7Sii.

  • Satellite C660 powers, black screen and switches off the power

    Hello world.

    I have a C660 - 22v.Everything worked very well. An hour later, then to use the laptop again, it works, and he turned on as normal in 2 clicks, then more nothing. Just a black screen, not yet turned on, then after 5 to 15 seconds, the fan accelerates for a second or 2, then the laptop turns off.

    Tried with the batteryout & just the charger pluged, just the battery, hold the power button, all sorts of ways, but it only of the switches off the power.

    I think that the hard drive has failed. Any help would be welcome as its out of warranty (16 months).

    A big thank you in advance, Neil.

    In my opinion it has nothing to do with the hard drive. I assume that there is a problem of electronic power supply. I have a similar problem with my A300 and at the moment I put t know what to do.
    Repair is probably quite expensive so I m thinking about selling on eBay as being faulty.

    Problem is that we cannot do much. What should do? You can dismount, take a look inside and put the new.

    Either it works or not. I'm afraid that your problem is for the service and it must be checked by the guys from the services of m.

  • monitor turns off not by the switch at the top. power cord seems loose at the back of the monitor. just need a

    I have a hp w2338h monitor, running Windows 7 and I am unable to turn off the monitor through the top switch. The power cord seems loose in its connection to the monitor. Do I just a new cord or something else is necessary?

    Thank you.

    Hello

    Try to push the power cord firmly upward.  It should not move when it is completely inserted.

    Try a reset of the monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up.

  • I have Photosmart 5580. When I switch to the power I get the 9995F886 message. I have reset the printer and error

    When I switch to the power I get the 9995F886 message. I have reset the printer and the error disappeared. What is this error message? How can I delete it for good.

    bedamax,

    This article should help to resolve the error you get:
    http://support.HP.com/us-en/document/c03081973

    Try the steps and tell us if it helps.

    Good luck!

  • Trains of pulses from switching on the fly

    Hello.  I'm having a problem with my state machine.  To my experience, we need to have a two trains different pulse at the request of various properties with and the idle state of the activity.  To do this, I thought that a simple state machine would meet all my needs.  However, my state machine appears to be locked in any case I chose when I hit the run button.  I suspect it has something to do with how generate impulses, which is to call a task request node repeatedly using a while loop.  My initial solution was to include just one button to stop this loop before moving my case, but it was ineffective.  Not even stop the state machine, that's when the loop has been able to stop the signal.

    Now I think I have what I want, need or change how the task VI stop and screw clear task are called (simple wiring in my case), or some commands that resets any process when I switch my machine of the State to another State.  It's probably something simple I forget, but I don't really know where to start.  It seems it would be easy in view of the nature of the State machines.  I have attached a sample VI, which is a compact version of my work VI, which implies a synchronization pulse to synchronize several channels which would pass them all when status changes.

    Note: The idea is to have the program running at all times and relaxation with a button or a switch in the experimental field.

    I use 2009 SP1, if you're curious.

    If you want that digital reading at each iteration of the loop, you must place the Terminal inside the loop. Currently, it is only read once at the beginning of the program, and then never again.

    Try execution highlighting to see for yourself.

    Overall, you have to rearchitect the whole program. Currently, it requires controls to be pressed in a certain order.

Maybe you are looking for