IOS/PIX RADIUS (01/09/00) on VPN 3002 user attribute

Similar Questions

• If I update my iOS to 10, it will be hase vpn pptp type?

  If I update my iOS to 10, it will be hase vpn pptp type?

  PPTP is no longer used. Replace your VPN L2TP configuration.

• PIX: Dialin routing through a different VPN VPN

  Here's the scenario: I have 2 PIX firewall on various sites connected to the internet with public (PIX A and B PIX) IP addresses.

  There is a permanent VPN site to site between the two and there is a clear separation between subnets between the two sites (internal network behind PIX is 10.10.4.0/24 and the internal network behind PIX B 192.168.0.0/16).

  I created dialin VPDN access to PIX for laptops to dialin via VPN - it currently allows access to the subnet 10.10.4.0/24 without problem.

  Now - I need these users of portable computers, when connects via the VPN to PIX has to be able to access the other remote site and access the subnet 192.168.0.0/16 of routing through the VPN site to site of PIX B.

  Is this possible? I would be grateful to anyone who helps with that. Thank you...

  This is currently not possible on the PIX as the PIX will not route traffic back on the same interface, it is entered in the.

  This feature will be available in the upcoming v7.0 version, which is currently in beta, so look out for it and you're ready to go.

• Question: how to assign the VPN IP VPN client user using 5.4 ACS?

  I'm new to ACS5.4.  What I want to achieve is to leave the ACS5.4 to assign IP addresses to users who are connecting to our ASA using the Cisco VPN client.  ASA runs as a Radius of ACS5.4 client, and we have tested successfully for Radius Authentication.  But users always get "unknown error" in the client VPN, after to be authenticated successfully.  I think I used probably incorrect RADIUS attributes to an authorization policy.  Here's what I did:

  1. in the elements of the policy-> authorization permissions->-> authorization of network access profiles, I created a new profile and this profile is called the Radius CVPN3000/ASA/PIX7.x-DHCP-Network-Scope attribute.  An IP address is entered under this attribute as a static value.

  2. then, in access policies-> services-> client VPN IPSec with RADIUS Access (it's politics that I created)-> permission, I created an authorization policy allowing RADIUS previously created profile in order to be used.

  I missed something?  Maybe I got the wrong RADIUS attribute?  Thanks in advance for any help!

  ACS 5 doesn't have the ability to provide the IP addresses between the pools of IP addresses defined in ACS.

  You must assign static users on basis by user on ACS 5. You can also create a pool on the SAA and tap the name of the ACS 5 pool

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.3/release/notes/acs_53_rn.html#wp216411

  Jatin kone
  -Does the rate of useful messages-

• The last IOS 9.3.1 is now safe for the users of IPad 2 GSM?  I don't want horrible IOS 9.3 activation problems recur everywhere.

  The last IOS 9.3.1 is now safe for the users of IPad 2 (GSM) download and install?  I don't want the horrible fiasco of activation IOS 9.3 reproduce anywhere!

  Yes, you can upgrade to iOS 9.3.1.

• ASA VPN - allow user based on LDAP Group

  Hello friends

  I have create a configuration to allow connection based on LDAP Group.

  I m not specialize in the firewall and I tried to follow the links above, but both seem old, commanded several is not available.

  http://www.tunnelsup.com/Cisco-ASA-VPN-authorize-user-based-on-LDAP-group

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  Anyone know how I can do?

  Thank you

  Marcio

  I like to use the Protocol DAP (dynamic access policies) to control this.  Follow this guide:

  https://supportforums.Cisco.com/document/7691/ASA-8X-dynamic-access-policies-DAP-deployment-guide

• remote VPN and vpn site to site vpn remote users unable to access the local network

  As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config

  The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.

  ASA Version 8.2 (2)
  !
  host name
  domain kunchevrolet
  activate r8xwsBuKsSP7kABz encrypted password
  r8xwsBuKsSP7kABz encrypted passwd
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  PPPoE client vpdn group dataone
  IP address pppoe
  !
  interface Ethernet0/1
  nameif inside
  security-level 50
  IP 192.168.215.2 255.255.255.0
  !
  interface Ethernet0/2
  nameif Internet
  security-level 0
  IP address dhcp setroute
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Shutdown
  No nameif
  no level of security
  no ip address
  management only
  !
  passive FTP mode
  clock timezone IST 5 30
  DNS server-group DefaultDNS
  domain kunchevrolet
  permit same-security-traffic intra-interface
  object-group network GM-DC-VPN-Gateway
  object-group, net-LAN
  access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
  tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  MTU 1500 Internet
  IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  enable ASDM history
  ARP timeout 14400
  NAT-control
  Global 1 interface (outside)
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  AAA authentication LOCAL telnet console
  AAA authentication http LOCAL console
  AAA authentication enable LOCAL console
  LOCAL AAA authentication serial console
  Enable http server
  x.x.x.x 255.255.255.252 out http
  http 192.168.215.0 255.255.255.252 inside
  http 192.168.215.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto-map dynamic dynmap 65500 transform-set RIGHT
  card crypto 10 VPN ipsec-isakmp dynamic dynmap
  card crypto VPN outside interface
  card crypto 10 ASA-01 set peer 221.135.138.130
  card crypto 10 ASA - 01 the transform-set RIGHT value
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 65535
  preshared authentication
  the Encryption
  sha hash
  Group 2
  lifetime 28800
  Telnet 192.168.215.0 255.255.255.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 5
  Console timeout 0
  management-access inside
  VPDN group dataone request dialout pppoe
  VPDN group dataone localname bb4027654187_scdrid
  VPDN group dataone ppp authentication chap
  VPDN username bb4027654187_scdrid password * local store
  interface for identifying DHCP-client Internet customer
  dhcpd dns 218.248.255.141 218.248.245.1
  !
  dhcpd address 192.168.215.11 - 192.168.215.254 inside
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  Des-sha1 encryption SSL
  WebVPN
  allow outside
  tunnel-group-list activate
  internal kun group policy
  kun group policy attributes
  VPN - connections 8
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value split tunnel
  kunchevrolet value by default-field
  test P4ttSyrm33SV8TYp encrypted password username
  username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
  username kunauto attributes
  Strategy Group-VPN-kun
  Protocol-tunnel-VPN IPSec
  tunnel-group vpngroup type remote access
  tunnel-group vpngroup General attributes
  address pool VPN_Users
  Group Policy - by default-kun
  tunnel-group vpngroup webvpn-attributes
  the vpngroup group alias activation
  vpngroup group tunnel ipsec-attributes
  pre-shared key *.
  type tunnel-group test remote access
  tunnel-group x.x.x.x type ipsec-l2l
  tunnel-group ipsec-attributes x.x.x.x
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
  : end
  kunauto #.

  Hello

  Looking at the configuration, there is an access list this nat exemption: -.

  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0

  But it is not applied in the States of nat.

  Send the following command to the nat exemption to apply: -.

  NAT (inside) 0 access-list sheep

  Kind regards

  Dinesh Moudgil

  P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

• IPSec vpn ios - pix problem

  I have a big problem and I don't know what to do. set up a VPN with the following data:

  of the encryotion, md5 hash, dh 1, pre-shared, but when I tried to affermirai the vpn router ios show me this error

  Jul 1 20:50:15.311: IPSEC (validate_transform_proposal): application for conversion not supported for identity:

  {esp-3des esp-md5-hmac}

  Help, please

  show configurations.

• The 'IETF-RADIUS-Idle-Timeout' value substitute "Vpn-session-timeout' of group policy?

  Hello community,

  I wish to have a dynamic substitution of "Vpn-session-timeout' of Group Policy (using"ldap attribute-map").

  Read the section "Support for RADIUS authorization attributes" of the SAA, it is not clear, but apparently attribute 'IETF-RADIUS-Session-Timeout' being Cisco attribute name of the ASA to "vpn-session-timeout '.

  Can anyone confirm?

  R, Alex

  Yes!

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_ser...

• Remote monitoring Pix on IPSEC site to site VPN

  I have a few 501 s PIX that connect through the VPN site-to site. We use Orion NPM and I can't add monitoring. I was able to add remote routers that connect through site-to-site VPNs. I guess that the rules of the Pix security/NAT prevent that. The configuration of the remote Pix is attached.

  You need on the 2800...

  access-list 131 permit ip host 172.16.30.19 24.172.234.126

• SSH Authentication: PIX-> RADIUS

  Hello. I try to have a [6.3.5] PIX firewall question a RADIUS server for authentication SSH users. The PIX is remote, if I'm afraid of losing access to it. :) My question is what commands can I enter if I am already SSHed in unity, such that the NEXT time I SSH in, PIX will check the RADIUS box for my user name / password challenge? Pleae help... Thank you!!!

  Hey Quentin,

  We can have this command, but it is not mandatory to have access SSH for the PIX.

  This command is used to verify the credentials allow RADIUS.

  Kind regards

  Jagdeep

• PIX telnet/ssh access to the VPN Lan2Lan

  Scenario of several Lan - Lan IPSEC VPN between PIX F/Ws.

  I need to remotely access / these PIX via Telnet/SSH & would prefer to do it through the VPN tunnel.

  NB, I tried telnet/ssh configuration for both inside/outside of my source but can't hit the PIX.

  Because the Tunnel is actually inside-inside I'm trying to connect to the inside interface of the pIX.

  You can do it now in 6.3 code with the command "access management". See http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/mr.htm#1137951 for more details.

• PIX v7 speaks to talk about vpn access via the hub of pix

  Hello

  Does anyone know if the v7 PIX code supports the overs speaks of talking about VPN connectivity?

  For example, 3 sites, Hub, to talk to and A of spoke spoke of b and B connect in the hub (PIX) with VPN.

  With earlier versions of the software, the rays would not be able to communicate. Is this possible with the new version of the code?

  Thank you

  Hello

  As long as the hub is running v7, you should be able to do. See

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00804675ac.shtml

  for an example.

  HTH

  Kind regards

  Cathy

• For users remote if RADIUS or ldap services available VPN servers are not there?

  Dear people,

  I have ASA Adaptive Security Appliance 5510 with below features.

  Now, what is the best way to setup VPN for remote users to securely, if I have no services LDAP or Radius server.

  HOFW # sh flash:

  path-# - length - time -.

  181 14137344 March 3, 2003 08:36 asa804 - k8.bin

  195 436 sep 2012 01 16:28:05 bar.emf

  75 4096 November 10, 2011 18:41:26 login

  192 1335 November 10, 2011 18:41:26 log/recovery-event.388.20111110.131127

  79 4096 19 January 2009 16:12:34 crypto_archive

  182 7562988 19 January 2009 16:14:06 asdm - 613.bin

  184 4863904 19 January 2009 16:15:44 securedesktop_asa_3_3_0_129.pkg.zip

  185 4096 19 January 2009 16:15:46 sdesktop

  194 1462 19 January 2009 16:15:46 sdesktop/data.xml

  186 2153936 19 January 2009 16:15:46 anyconnect-victory - 2.2.0133 - k9.pkg

  187 3446540 19 January 2009 16:15:48 anyconnect-macosx-powerpc - 2.2.0133 - k9.p

  kg

  188 3412549 19 January 2009 16:15:50 anyconnect-macosx-i386 - 2.2.0133 - k9.pkg

  189 3756345 19 January 2009 16:15:52 anyconnect-linux - 2.2.0133 - k9.pkg HOFW # sh flash:
  path-# - length - time -.
  181 14137344 March 3, 2003 08:36 asa804 - k8.bin
  195 436 sep 2012 01 16:28:05 bar.emf
  75 4096 November 10, 2011 18:41:26 login
  192 1335 November 10, 2011 18:41:26 log/recovery-event.388.20111110.131127
  79 4096 19 January 2009 16:12:34 crypto_archive
  182 7562988 19 January 2009 16:14:06 asdm - 613.bin
  184 4863904 19 January 2009 16:15:44 securedesktop_asa_3_3_0_129.pkg.zip
  185 4096 19 January 2009 16:15:46 sdesktop
  194 1462 19 January 2009 16:15:46 sdesktop/data.xml
  186 2153936 19 January 2009 16:15:46 anyconnect-victory - 2.2.0133 - k9.pkg
  187 3446540 19 January 2009 16:15:48 anyconnect-macosx-powerpc - 2.2.0133 - k9.p
  kg
  188 3412549 19 January 2009 16:15:50 anyconnect-macosx-i386 - 2.2.0133 - k9.pkg
  189 3756345 19 January 2009 16:15:52 anyconnect-linux - 2.2.0133 - k9.pkg

  Concerning
  Vesta
  "Everybody is genius." But if you judge a fish by its ability to climb on a tree, he will live his entire life, believing that this is stupid. "

  With the ASA you will be somewhat limited in what you can do for remote-access-VPN.

  There are two ways to set that up:

  (1) using the SSL - VPN with the AnyConnect Client

  To do this, you must license Premium AnyConnect quite expensive for the amount of competitor users you plan to accept or AnyConnect Essentials cheap license which will give you 250 AnyConnect users which is the platform limit.

  But for the essential AnyConnect license, you need upgrade your ASA RAM because you need an ASA - latest operating system for it.

  But going this path will be the best option.

  (2) with the IPSec Client inherited (EasyVPN). The customer is EOL/EOS announced and not all development will get more. But for now, it could be a way to go until you upgrade your ASA.

  Here is an example of how to configure your ASA for the old CLient IPSec:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008060f25c.shtml

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• A PIX 501 can connect to a VPN service?

  Can a PIX 501 6.3 (4) establish a VPN to a supplier like www.privateinternetaccess.com?  They claim to support PPTP and L2TP/IPSEC.  If so, how the PIX should be configured?

  Thank you.

  No, none of the networking gear (Inc. ASA) can be configured as PPTP and L2TP over IPSec client client.

  Both are PC or MAC software.