ASA VPN - allow user based on LDAP Group

Hello friends

I have create a configuration to allow connection based on LDAP Group.

I m not specialize in the firewall and I tried to follow the links above, but both seem old, commanded several is not available.

http://www.tunnelsup.com/Cisco-ASA-VPN-authorize-user-based-on-LDAP-group

http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

Anyone know how I can do?

Thank you

Marcio

I like to use the Protocol DAP (dynamic access policies) to control this. Follow this guide:

https://supportforums.Cisco.com/document/7691/ASA-8X-dynamic-access-policies-DAP-deployment-guide

Tags: Cisco Security

Similar Questions

WebVPN mapping of group policy-based user name not LDAP Group?

Hi guys,.

As the title says I'm looking for a way to map users who authenticate via LDAP to the webvpn to a particular group policy.

The reason why I want to do, is to assign particular cifs on a per user basis. I know that you can map a LDAP group to group policy, but all users are in the same group. (I can't change that fact).

So I was wondering if there is a way to map a "username", which authenticates via LDAP on group policy?

Cheers.

That's maybe what you are looking for:

http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008089149d.shtml

It is similar to the use of RADIUS 25 attribute, but for LDAP. Read it carefully and you should find the solution.

Please evaluate the useful messages.

Separation of monitor only and Admin for Cisco ASDM (ASA) access for users authenticated via LDAP

Hello

We have two groups of ads on network Admins, one for the system administrators group. The network Admins will get Priv lvl 15 the other Priv lvl 3.

This is the setup I use:

TestASA # sh run ldap-attribute-map of test4
Comment by card privileged-level name
map-value comment fw - ro 5
map-value comment fw - rw 15
memberOf IETF Radius-Service-Type card name
map-value memberOf "cn = s-FW-Admin, OR = security groups, DC = 802101, DC = local" 6
map-value memberOf "cn = s-fw-ro, OR = security groups, DC = 802101, DC = local" 5

The user in both groups can connect ssh and asdm but all users get the same rights priv lvl 15.

Someone at - it an idea?

You must visit the listed link below to configure ASA to only read access and access admin. not sure, if you have already been there.

https://supportforums.Cisco.com/docs/doc-33843

~ BR
Jatin kone

* Does the rate of useful messages *.

ISE 1.3 not allow authentication based on the group network

ISE 1.3

MS AD 2008R2

Two groups: all employees, all students

Problem: Students employee network connection

I have two wireless networks, STUDENTS and EMPLOYEES. In ISE, I have two strategies for approval for these networks. In an effort prior to keep students to connect to the network employee, I set the permission policy:

Employee: If (Wireless_802.1X AND AD1:ExternalGroups is equal to mydomain/accounts/all employees AND the AD1:ExternalGroups NOT_EQUALS mydomain/students/all students) then: Employee_Profile

Unfortunately, it did not work. Students have their own username and password in AD and each faculty and staff member. I checked that students are using their identification and employee network connection information. Conversely, I can connect to the student network using the credentials of the employee. The main problem is with the students, employee network, they use all the applicable DHCP scope addresses.

I need to not allow the network connection used by students and the network of students by employees.

Any help would be appreciated!

Kevin

Glad you were able to solve your problem! Also thank you for taking the time to come back and share the solution with everyone (+ 5) to me.

If your problem is resolved, you must mark the thread as "answered":) ".

Provisioning of the IOM users to LDAP groups
Hi all

Product details

OIM9101
Sun connector90420
Apache Directory server

My requirement is
to configure a user to the LDAP group based on information of the organization.
Example of

If only it belongs to the orgX, it must be made member of LDAP grpX

If only it belongs to the orgy, it must be made a member of the LDAP grpY

How can I configure my setup for the prescription above to be implemented?

I am now able to make him a member of a LDAP group. But I wanted this group to select dynamically based on the Organization of the users to the IOM.
What I have to write a rule generator adapter pre-filled to select the group based on the organization. How? Need help.

Thank you

concerning

SAS
1. create rules by using the name of the organization.
2. create a group for each name of the Organization
3. apply the rules of membership in each organization to place users into groups based on the name of organizastion.
4 create an access policy for each group which has only the table entry of a child to the ldap group.

your da!

-Kevin

LDAP attribute on user card match no group

We currently have Anyconnect (client based) up and running on our ASA 5515 X 9.5 (1) running. I use AD LDAP for authentication and configuration of LDAP attribute maps and assigned to our LDAP on the ASA server config. Like many, we use these cards to allow ASA assign a group policy to a user based on the AD group membership. Basically I have one AD Group for regular of VPN users and a group for users Admin VPN advertising. It works pretty well, but there are cases where the user profile specific related to group policy 'Regular users of VPN' does not work for all users of this ad group. I was trying to find a way to adjust the settings for certain users based on the user name. Say the user needs setting up VPN from an RDP session, but I'm not all users have that so I would attribute a group different local\Configuration user profile based on the AD username that would allow the VPN from a RDP session. Still, the rest of the users would be blocked to the RDP VPN. Here is my map to attribute LDAP database:

map-attribute LDAP
name of the memberOf Group Policy map
map-value memberOf "LDAP path."
msRADIUSFramedIPAddress IETF-RADIUS-Framed-IP-Address card name

Now I could do here with the above configuration, I think it's to create a new group policy on the SAA for a certain group of users and then create a new value of the card with a new LDAP path that would point to a new group in AD, say "RDP VPN users". I then add the users I want Anyconnect group policies\user specific profiles for this particular ad group. But the question is that I would prefer not to have to create as many groups in AD.

I want to know is if there is a way to have a path of card value of LDAP attribute to a certain username AD somehow. As if the LDAP path was something like "CN =, OU = users, DC =, DC ='.»» This way I could affect a group policy to the majority of users in the group "Regular users of VPN" AD, but then assign a different policy to some users who require slightly different settings. That would allow me to match on a certain user, not one ad group? The Group cisco-attribute-name strategy addresses a user as if it were an ad group? I guess not, but not sure. I looked through the list of names of attributes-cisco - but didn't see anything that looked like it worked for AD user names.

Also, if anyone knows a better way please let me know I am open to suggestions. I hope that makes sense. Thanks in advance to the community for help.

I think that you need a completely different approach - DAP (dynamic access policies).

DAP allows a lot of motion of things, and you can create additive strategies. So if you are a member of the group 'A' you add to this URL. If you are also a member of the group 'B' you add this ACL. If it can also do other things, like checking the registry keys, etc.

The Guide deployment of DAP.

https://supportforums.Cisco.com/document/7691/ASA-8X-dynamic-access-policies-DAP-deployment-guide

I pretty much don't use DAP now (and no attribute is mapped) due to the significant increase in flexibility.

Trying of authenticating to a LDAP group users - all users authenticated

ASA successfully authenticates all users if they are in the OKCVPNAccess user group, and the ASA correctly sees the LDAP map attribute. There is that a single policy.

[54] memberOf: value = CN = VPNAccess-OKC, OR = Groups, OU = OU = xxx, xxx, DC = xxx, DC = local
[54] mapped to IETF-RADIUS-class: value = LDAPPolicy

I been through a lot of documentation on the web sites of Cisco but also looked at several forums, but I'm coming up with a blank as to what I can try next. I know that it will work with RADIUS and RADIUS I've used several times in the past, so this isn't an option. I was asked to do with LDAP. Any suggestions? I've included the part of the Setup, and I tried to sanitize it somewhat, so there may be an inconsistency of name here or there.

Thank you

LDAP attribute-map LDAPMAP
name of the memberOf IETF-Radius-class card
memberOf card-value CN = VPNAccess-OKC, OR = Groups, OU = xxx, OU = xxx, DC = xxx, DC is local LDAPPolicy
dynamic-access-policy-registration DfltAccessPolicy
AAA-Server LDAP protocol ldap
AAA-Server LDAP (inside) host 10.12.34.248
Server-port 389
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn xxx\vpn.auth
microsoft server type
LDAP-attribute-map LDAPMAP

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic outside_dyn_map 20 set pfs
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
crypto CRYPTO card - card 1000 ipsec-isakmp dynamic outside_dyn_map
CRYPTO-card interface card crypto outside

crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP disconnect - notify

internal CRYPTOGP group policy
CRYPTOGP group policy attributes
banner value of using this system is... Please log out immediately!
value of 10.12.34.248 DNS server 10.129.8.136
Protocol-tunnel-VPN IPSec
enable PFS
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list SPLITTUNNEL
xxx.local value by default-field

type tunnel-group CRYPTO-OKC-VPN remote access
General-attributes of CRYPTO-OKC-VPN Tunnel-group
LDAP authentication group-server
IPPOOL address pool
Group Policy - by default-CRYPTOGP
LDAP authentication group-server
tunnel-group CRYPTOOKC-VPN ipsec-attributes
pre-shared-key *.

In my view, using the map LDAP is just for an LDAP attribute to an appropriate group policy, you can control access user group policy.

Here is an example.

http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a008089149d.shtml

After the user is connected, vpn can you use "show vpn-sessiondb" to check what group policy is used?

Moreover, I did not see 'LDAPPolicy' has been defined in your configuration.

Clientless VPN SSL - policy of another LDAP authentication group

Hi all

I am currently working with Clientless SSL VPN. I have a problem with the creation of access to the different or blocking of users.

I created tunnel/connection-profile (WEB-VPN-TEST-Profil2) and create group WEB-VPN-TEST2. I joined with the LDAP server. I also create a map LDAP attribute to provide only specific users to access. I havn't create an address pool

What I'm trying to do is give access to the 'IL DBA' team and stop access to all the others in my organization. But to the login page when I give my password, I am able to connected even if I'm in the team "IT Network". Here's what I've done, (think I work for abcxyz.com)

=======================================================

AAA-server BL_AD protocol ldap

AAA-server BL_AD (inside) host 172.16.1.1

OR base LDAP-dn = abcxyz, DC = abcxyz, DC = com

LDAP-naming-attribute sAMAccountName

LDAP-login-password *.

LDAP-connection-dn [email protected] / * /

microsoft server type

LDAP-attribute-map CL-SSL-ATT-map

=======================================================

LDAP attribute-map CL-SSL-ATT-map

name of the memberOf IETF-Radius-class card

map-value memberOf 'CN = IT s/n, OU = abcxyz, DC = abcxyz, DC = com' WEB-VPN-TEST2

========================================================

WebVPN

allow inside

tunnel-group-list activate

internal-password enable

========================================================

internal strategy group WEB-VPN-TEST2

Group WEB-VPN-TEST2 policy attributes

VPN-tunnel-Protocol webvpn

group-lock value WEB-VPN-TEST-Profil2

WebVPN

value of the URL-list WEB-VPN-TEST-BOOKMARK

value of personalization WEB-VPN-TEST2

========================================================

remote access of tunnel-group WEB-VPN-TEST-Profil2 type

attributes global-tunnel-group WEB-VPN-TEST-Profil2

authentication-server-group abcxyz_AD

Group Policy - by default-WEB-VPN-TEST2

tunnel-group WEB-VPN-TEST-Profil2 webvpn-attributes

enable WEB-VPN-TEST-Profil2 group-alias

=========================================================

Please let me know if there is a question or let me know why I am still able to access the same if I did my attribure to match only with "IT"DBA ".

Thanks in advance.

BR.

Adnan

Hello Adnan,

That's what you do:

internal group WITHOUT ACCESS strategy

attributes of non-group policy

VPN - concurrent connections 0

attributes global-tunnel-group WEB-VPN-TEST-Profil2

Group Policy - by default-NO-ACCESS

Group WEB-VPN-TEST2 policy attributes

VPN - connections 3

Kind regards

I have been unable to untick the box "Allow user to administer this computer" in the preferences users and groups of the system...

I took to allow a user to administer by checking the box "Allow user to administer this computer" of the user in the users window and groups in system preferences.

I tried to uncheck the box, but it remains unchanged.

You must be logged in as a different user than the one you are trying to change, and your own user name must be an administrator on this system.

Site2Site VPN ASA 5505 - allow established traffic

Hello

I have an ikev1/Ipsec tunnel between two ASA.

Network with local 10.31.0.0/16

The other network with local 172.21.0.0/24

But I would like that only traffic that is launched from the 10.31.0.0/16 is allowed to 172.21.0.0/24 to 10.31.0.0/16 is it possible?

(to answer 10.31.0.0/16 is enable between this remote network 172.21.0.0/24)

Best regards, Steffen.

Hello

If I didn't understand anything wrong in the above question then I think you might be able to perform the following operations on the ASA with the local network of 10.31.0.0/16.

The ASA has the following global configuration, which is the default if you don't the have not changed

Sysopt connection permit VPN

This show CUSTOMARY in CLI configuration given above is the default setting.

You can check this with the command

See the race all the sysopt

This will list even the default setting

Now that this configuration means essentially is allow ALL traffic that comes through a VPN connection to get through the ASA ACL interface. So in your case at the location where the ASA with the network 10.31.0.0/16, the ASA would allow connections coming through the other network of 172.21.0.0/24 sites (as long as it was OK on other sites ASAs LAN interface ACL)

What you could do is to insert the following configuration

No vpn sysopt connection permit

What this would do is ask you to ALLOW ALL traffic that is coming through the VPN connection via the interface ' outside ' of the ASA you want to spend. (which I suppose is the name of your current interface that handles VPN connections). In other words, the VPN traffic would not receive a "pass" to get through the ACL of 'outside'interface, instead you must allow as all other traffic from the Internet.

If you decide to do, then you MUST CONSIDER the following thing. If you have other VPN connections as other connections L2L VPN or VPN Client, THEN you must first allow their traffic in your 'external' ACL interface for the SAA to the LAN. If you do this and insert the configuration above, you will notice that the traffic will start to get blocked by the "external" ACL interface (or if you don't have an ACL configured then the ASAs 'security level' will naturally block traffic in the same way as would an ACL)

So if we assume that the L2L VPN is the only link you had configured on the SAA with 10.31.0.0/16 then the following changes would happen.
- Hosts in the network 10.31.0.0/16 would be able to open connections to the remote network of 172.21.0.0/24 provided interfaces LAN what ACL allow this traffic
- Return for this connection of course traffic be would allow by the same ASA like all other traffic.
- IF certain incoming connection requests to the ASA with 10.31.0.0/16 network 172.21.0.0/24 network, it could crash except IF you ALLOW it to the 'outside' interfaces ACL
Hope this made sense and helped

Think about scoring the answer as the answer if it answered your question.

Naturally ask more if necessary

-Jouni

Home page by default for OBIEE 11 g based on the users and the wise group

Hi all
I'm using OBIEE 11 g.
I need set the page default dashboard for the user and the wise group.
EX:
User1 is belongs to Group1 and Role1 - they need to see the default homepage as Dashboard1.
User2 is belongs to the Group 2 and Role2 - they need to see the default homepage as Dashboard2.
Kindly guide me to achieve.
Please answer as soon as POSSIBLE.
Thanks in advance.

RR

It is generally considered poor form to scream as soon as POSSIBLE to a question. http://www.CatB.org/ESR/FAQs/smart-questions.html

As far as your question goes, it is that the CHEMINPORTAIL variable is for:

http://docs.Oracle.com/CD/E23943_01/bi.1111/e10540/variables.htm#i1013436

OBIEE - system (reserved variables) session variables | GerardNico.com (BI, OBIEE, data warehouse and OWB)

AnyConnect: User based authentication certificate filtering Configuration

Hello colleagues in the network.

recently I needed to configure AnyConnect SSL VPN with certificate authentication to meet the needs of connection at the request of the features of Cisco Jabber.

Everything is ok, but I need to filter users based on their personal certificate information. For example - all those who have a personal certificate from our CA can now access this VPN. I want to set the users by e-mail of the certificate and only these users are granted access.

I used this command:

WebVPN

allow outside

AnyConnect image disk0:/anyconnect-win-3.1.04072-k9.pkg 1

AnyConnect enable

tunnel-group-list activate

Certificate-Group-map Cert - filter 10 company-Jabber

map of encryption ca Cert certificate - filter 10

name of the object attr eq ea [email protected] / * /

The problem is that I have to go can visit his profile - if I change [email protected] / * / to

On the AnyConnect client - I connect to the GroupURL of the connection profile Company-Jabber

Hi Alexandre

There are several ways to approach this and this depends somewhat on the rest of the config, for example if you have other groups of tunnel etc..

I guess the easiest way (if it does not interfere with the rest of your configuration) is to add something like this:
```
crypto ca certificate map Cert-Filter 65535 subject-name ne ""
```
This would attract all users/certificates does not not from your previous rules.

Under webvpn you map these users to another tunnel-group (connection profile):
```
certificate-group-map Cert-Filter 65535 NoAccess
```
And configure the NoAccess group so that access is denied (for example, by setting simultaneous connections to 0 in the corresponding Group Policy).

Other means would be to use DAP (dynamic access policies) to pretty much the same as the certmap, or permission to LDAP (for example retrieves the user name for the certificate, then perform an LDAP search to see if the user is allowed to use the VPN - in this scenario, there is no need to list all the users on the ASA but for example you need to create a new group on your LDAP server that contains all VPN users).

Let me know if you want to go further in the foregoing

see you soon

Herbert

Emergency response in ASA VPN 5055

Hey guys...

AM starting in ASA and cisco configuration, I always use ASDM Launcher to set up or change my Cisco Firewall ASA5055, I tried to enable VPN on my ASA with IPsec VPN Wizard, remote VPN section and I did a configuration for Cisco VPN Client (not windows), until this moment, I still couldn't connect to my VPN, I don't know where is the problem exactly , it delivery? or access list?
Here is running Setup:

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

: Saved

:

ASA Version 8.0(3)6

!

hostname ciscoasa

enable password ******* encrypted

passwd ********* encrypted

names

!

interface Vlan1

nameif inside

security-level 100

ip address 10.10.10.2 255.255.255.252

!

interface Vlan2

nameif outside

security-level 0

ip address xx.xx.xx.xx 255.255.255.248

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

ftp mode passive

same-security-traffic permit inter-interface

same-security-traffic permit intra-interface

access-list DALLAS_splitTunnelAcl standard permit host 192.168.3.229

access-list DALLAS_splitTunnelAcl standard permit 10.10.10.0 255.255.255.252

access-list DALLAS_splitTunnelAcl standard permit 192.168.3.0 255.255.255.0

access-list dallas_VPN_splitTunnelAcl standard permit 10.10.10.0 255.255.255.252

access-list Out extended permit ip any any

access-list inside_nat0_outbound extended permit ip 10.10.10.0 255.255.255.252 192.168.14.0 255.255.255.192

pager lines 24

logging asdm informational

mtu inside 1500

mtu outside 1492

ip local pool Dallas 192.168.14.1-192.168.14.50 mask 255.255.255.0

ip verify reverse-path interface inside

ip verify reverse-path interface outside

icmp unreachable rate-limit 1 burst-size 1

icmp permit any inside

asdm image disk0:/asdm-603.bin

no asdm history enable

arp timeout 14400

global (outside) 1 interface

nat (inside) 0 access-list inside_nat0_outbound

nat (inside) 1 0.0.0.0 0.0.0.0

static (inside,outside) interface 192.168.3.229 netmask 255.255.255.255

route outside 0.0.0.0 0.0.0.0 xx.xx.xx.xx 1

route inside 192.168.3.0 255.255.255.0 10.10.10.1 1

timeout xlate 3:00:00

timeout conn 1:00:00 half-closed 1:10:00 udp 0:02:00 icmp 0:00:02

timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00

timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00

timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

dynamic-access-policy-record DfltAccessPolicy

http server enable

http 192.168.1.0 255.255.255.0 inside

http 0.0.0.0 0.0.0.0 inside

no snmp-server location

no snmp-server contact

snmp-server enable traps snmp authentication linkup linkdown coldstart

no sysopt connection permit-vpn

crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac

crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-DES-SHA ESP-DES-MD5

crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP

crypto map outside_map interface outside

crypto isakmp enable inside

crypto isakmp enable outside

crypto isakmp policy 10

authentication pre-share

encryption des

hash sha

group 2

lifetime 86400

no crypto isakmp nat-traversal

telnet 0.0.0.0 0.0.0.0 inside

telnet timeout 5

ssh 0.0.0.0 0.0.0.0 inside

ssh 0.0.0.0 0.0.0.0 outside

ssh timeout 5

console timeout 0

dhcpd auto_config outside

!

vpnclient server xx.xx.xx.xx

vpnclient mode client-mode

vpnclient vpngroup dallas password ********

vpnclient username dallas password ********

threat-detection basic-threat

threat-detection scanning-threat shun

threat-detection statistics

group-policy DefaultRAGroup internal

group-policy DefaultRAGroup attributes

vpn-tunnel-protocol IPSec l2tp-ipsec

group-policy DfltGrpPolicy attributes

vpn-tunnel-protocol IPSec l2tp-ipsec

group-policy dallas internal

group-policy dallas attributes

dns-server value xx.xx.xx.xx

vpn-tunnel-protocol IPSec

username admin password *************** encrypted privilege 15

username dallas password *********  nt-encrypted privilege 0

username dallas attributes

vpn-group-policy DefaultRAGroup

username user1 password *********** nt-encrypted privilege 0

username cisco password ********* encrypted privilege 15

tunnel-group DefaultRAGroup general-attributes

default-group-policy DefaultRAGroup

tunnel-group DefaultRAGroup ipsec-attributes

pre-shared-key *

tunnel-group dallas type remote-access

tunnel-group dallas general-attributes

address-pool Dallas

default-group-policy dallas

tunnel-group dallas ipsec-attributes

pre-shared-key *

!

class-map inspection_default

match default-inspection-traffic

!

!

policy-map type inspect dns preset_dns_map

parameters

  message-length maximum 512

policy-map global_policy

class inspection_default

  inspect dns preset_dns_map

  inspect ftp

  inspect h323 h225

  inspect h323 ras

  inspect rsh

  inspect rtsp

  inspect esmtp

  inspect skinny 

  inspect sunrpc

  inspect xdmcp

  inspect sip 

  inspect netbios

  inspect tftp

  inspect icmp

!

service-policy global_policy global

prompt hostname context

Cryptochecksum:beac138dba28b1b3b58dffbcbc4fbb93

: end

asdm image disk0:/asdm-603.bin

no asdm history enable

When I use the VPN Client to connect to my VPN using the real IP, this message

Please if someone can see the problem and tell me how to solve it by ASDM GUI or CLI, but I preferred ASDM...

Note: VPN Tunnel must connect on 192.168.3.X internal network IP range
which is accessible by ASA you see the redirect to 192.168.3.229

Thank you all

Here is the step by step on all orders that are required so far:

conf t

Sysopt connection permit VPN

Crypto isakmp nat-traversal 25

inside_nat0_outbound to access extended list ip 192.168.3.0 allow 255.255.255.0 192.168.14.0 255.255.255.192

dallas attributes of group policy

Split-tunnel-policy tunnelspecified

value of Split-tunnel-network-list DALLAS_splitTunnelAcl

user name attribute of dallas

No strategy of group-vpn-DefaultRAGroup

Strategy Group-VPN-dallas

not static (inside, outside) interface 192.168.3.229 netmask 255.255.255.255

public static tcp (indoor, outdoor) interface 80 192.168.3.229 80 netmask 255.255.255.255

public static tcp (indoor, outdoor) interface 132 192.168.3.229 132 netmask 255.255.255.255

public static tcp (indoor, outdoor) interface 444 192.168.3.229 444 netmask 255.255.255.255

public static tcp (indoor, outdoor) interface 66 192.168.3.229 66 netmask 255.255.255.255

public static tcp (indoor, outdoor) interface 77 192.168.3.229 77 netmask 255.255.255.255

clear xlate

And finally "wr mem" to save the configuration.

Regarding spam, ASA cannot block spam unless you have the CSC module installed on the SAA.

remote VPN and vpn site to site vpn remote users unable to access the local network

As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config

The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.

ASA Version 8.2 (2)
!
host name
domain kunchevrolet
activate r8xwsBuKsSP7kABz encrypted password
r8xwsBuKsSP7kABz encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 0
PPPoE client vpdn group dataone
IP address pppoe
!
interface Ethernet0/1
nameif inside
security-level 50
IP 192.168.215.2 255.255.255.0
!
interface Ethernet0/2
nameif Internet
security-level 0
IP address dhcp setroute
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
passive FTP mode
clock timezone IST 5 30
DNS server-group DefaultDNS
domain kunchevrolet
permit same-security-traffic intra-interface
object-group network GM-DC-VPN-Gateway
object-group, net-LAN
access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 Internet
IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
LOCAL AAA authentication serial console
Enable http server
x.x.x.x 255.255.255.252 out http
http 192.168.215.0 255.255.255.252 inside
http 192.168.215.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dynmap 65500 transform-set RIGHT
card crypto 10 VPN ipsec-isakmp dynamic dynmap
card crypto VPN outside interface
card crypto 10 ASA-01 set peer 221.135.138.130
card crypto 10 ASA - 01 the transform-set RIGHT value
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
Telnet 192.168.215.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
management-access inside
VPDN group dataone request dialout pppoe
VPDN group dataone localname bb4027654187_scdrid
VPDN group dataone ppp authentication chap
VPDN username bb4027654187_scdrid password * local store
interface for identifying DHCP-client Internet customer
dhcpd dns 218.248.255.141 218.248.245.1
!
dhcpd address 192.168.215.11 - 192.168.215.254 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Des-sha1 encryption SSL
WebVPN
allow outside
tunnel-group-list activate
internal kun group policy
kun group policy attributes
VPN - connections 8
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
kunchevrolet value by default-field
test P4ttSyrm33SV8TYp encrypted password username
username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
username kunauto attributes
Strategy Group-VPN-kun
Protocol-tunnel-VPN IPSec
tunnel-group vpngroup type remote access
tunnel-group vpngroup General attributes
address pool VPN_Users
Group Policy - by default-kun
tunnel-group vpngroup webvpn-attributes
the vpngroup group alias activation
vpngroup group tunnel ipsec-attributes
pre-shared key *.
type tunnel-group test remote access
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
: end
kunauto #.

Hello

Looking at the configuration, there is an access list this nat exemption: -.

192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0

But it is not applied in the States of nat.

Send the following command to the nat exemption to apply: -.

NAT (inside) 0 access-list sheep

Kind regards

Dinesh Moudgil

P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

ASA VPN with Fortgate

Hello people!

I still have the problem with VPN... Laughing out loud

I have to create a new VPN site to site between ASA 5510 (8.42 IOS) and Fortgate, but something is very strange, Don t VPN came and I see in the debug crypto 10 ikev1 the newspaper to follow:

[IKEv1] phase 1 default: incompatibility of types of attributes of class Gr OUP Description: RRs would be: Cfg 1 group would be: Group 2

But if I ask the other peer to change in Group 2, the msg in the SAA is:

[IKEv1] phase 1 default: incompatibility of types of attributes of class Gr OUP Description: RRs would be: Group 2 GCF: Group 1

Fortgate is possible to activate the two specific groups of VPN 1 and 2, and I would ask the other peer left this way and the ASA show:

[IKEv1] phase 1 default: incompatibility of types of attributes of class Gr OUP Description: RRs would be: Group 2 GCF: Group 1
[IKEv1] phase 1 default: incompatibility of types of attributes of class Gr OUP Description: RRs would be: Cfg 1 group would be: Group 2

The show isakmp his:

9 counterpart IKE: 179.124.32.181
Type: user role: answering machine
Generate a new key: no State: MM_WAIT_MSG3

I have delete and creat VPN 3 x and the same error occurs.

Everyone has seen this kind of problem?

Is it using Fortigate version 5 by chance?

I saw Cisco ASA VPN problems repeatedly with this code Fortigate, but above all it has been a problem of Phase 2 and defining KB life maximally on the side of the ASA has solved it... However this seems not to be your problem here.

The first thing in your config I see you have PFS enabled - have you insured it is located on the side of Fortinet or tried to turn it off on the side of Cisco to see if it happens?

Be stuck at MM_WAIT_MSG3 means that you sent your return policy, but then you have not received the third package in the ISAKMP riding so either the Fortigate is unhappy with something or there's a routing problem (however unlikely given that you have already had communication)

Try on the side of the ASA:
```
debug crypto isakmp 7
```
You can also confrm your external interface is 'outside1 '? You can see this "see intellectual property."

ASA VPN - allow user based on LDAP Group

Similar Questions

Maybe you are looking for