IP address of the USB does not

Similar Questions

• Email address on the mail does not. How to change?

  The email address on my Mail in not mine. How can I change? I sent an email to my friend and she did not recognize it because it wasn't my e-mail address but the content was mine. Why is this?

  Also, after this incident, I went my iCloud in settings and discovered in advance (located in the lower part of the iCloud) that the address on the letter was not mine. I don't know what I was doing, or what happened that the e-mail was bad and the worst is that you cannot change. I clicked it, like a thousand times, but it can not simply be change. Please help me.

  In settings > iCloud at the top is your email address/ID?

• the return address on the envelope does not print 4500 all-in-one

  I am trying to print the return address on envelopes #10 and can't find the right place to put the envelope. I tried all locations to put envelopes and printer it crosses but does not print. I ran a cloth across and it. and when it prints I tried to put the envelope but the printer does not recognize an envelope. Any help will be appreciated.

  Hello

  I suggest you contact the manufacturer of the printer and they shud be in a better position to tell you what should be the right place.

   

• type the web address in the browser does not

  I type in the web address browser area, I want to go to, and then press ENTER. Firefox browser does not attend the web address, it does not. I type www.wsj.com , then press 'enter' on the keyboard or the link of the cursor on the arrow and the Firefox browser does not go to this web address. He stays still. I have to type the web address in a search engine box in order to get to the web address, that I want to go.

  What happens if I use Aurora? It updates for most every day.
  I tried to disable modules and ran the browser safe too, but it still happens.

• Qosmio F55 all the usb does not

  Hello

  My qosmio's old 1y, 1 week ago any port usb stop working, mouse, printer, etc. E - SATA is ok, but wen I conect usb-same problem.
  I put the express card slot usb hub, even. It is common in usb, bicose its mi phone recharge, but said peripheral usb not recognized.

  So I'm updating the bios, chipset, all the drivers and reinstal windows vista, then I put windows 7, even I open it and I try to find CMOS batery to reset, but I don't the have not found
  I remove all the usb Manager divides and restart. even

  Please guys I need help
  tanks

  Hello

  You said that you have installed Windows Vista again
  But did you use Toshiba Recovery disk or the image of Toshiba for recovery?

  It seems really odd that all USB ports works Ok, if only one USP port would not work, it would be really strange but all!

  It seems that you have already tried everything, what I might suggest; Chipset, bios update, new installation of the OS.

  I have ideas and the only explanation for me is that the motherboard is affected

• external hard drive and the USB does not

  When I connect my external hard drive or my USB which do not shown anymore.not or work

  Hello

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  If a PC and if necessary the embedded USB can be disabled and a USB card can be used only
  is not expensive. For a laptop, using a real computer shop (no leeks and glances at a Best Buy
  or other stores) or system manufacturer support.

  ------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I want to include a Download button to download the Zip files from an external server. But each time the address of the server is located in the area of the web. How do I create a download where the address of the file, does not stand in the area of the w

  whenever I try to do a download button, so I can download zip files. the address of the file I'm standing on the addressline.

  But the file I have hosting on another server so I want the address of the file to be exposed.

  How to awoid who.

  Hover over a link will show the path by default, you need to customize this:

  http://StackOverflow.com/questions/9851372/how-can-URL-be-hidden-in-hyperlink-when-mouse-h more

  ink http://StackOverflow.com/questions/6725901/How-do-you-Hide-The-URL-when-you-hover-a-HYPERL

  Thank you

  Sanjit

• 9350 XPS13 installed win7 very well but the usb does not work

  As the object, windows 7 installed ok with the modifier of WIM Intel with USB driver 4.0.0.36 version.

  Now that windows is running, I can't the pilots moved to the laptop to update this thing.

  Advisor?

  I sent you a private message so that I can get your information.  I hope I'll be able to find a solution for you.

  TB

• How to use a USB microphone with voice dictation on MacBook Air?  Machine recognizes the USB device, but the microphone does not work.

  How to turn on a microphone USB bluetooth with voice dictation (Dragon for MAC) on the MacBook Air?  Machine recognizes the USB device, but the microphone does not work.   I don't see no response.   I use OS X 10.10.

  Version OS X?

• USB device not recognized (Nothing plugged and the mouse does not)

  My mouse (microsoft) wireless worked well until what within hours.
  then I said to unrecognized USB device
  The port works, but for some reason any
  the mouse is not, went bought another mouse and still getting the same message.
  Plus I get the USB device not recognized pop up, same
  Tho, nothing is plugged into one of the USB ports.
  Any suggestions on how to solve this problem

  Computer brand and model?  Windows OS?

  Open the Device Manager

  Click on the + sign next to USB controllers

  Do you not see that unknown device listed?

  Right click on the playlists of USB root hub

  Select uninstall

  Close Device Manager

  Restart the computer to Windows reload the drivers

  USB is now recognized?

  If failed, shutdown computer.  Unplug it from the electrical outlet.  Leave unplugged for 1 to 2 minutes.  Plug the unit in and restart the computer.

  USB is now recognized?

  How to troubleshoot USB device problems that can occur after a laptop computer that is running Windows Vista recovery from sleep or standby extended

  http://support.Microsoft.com/kb/953367

  Windows Vista does not recognize a USB external optical disc drive when you reconnect the USB optical drive to the computer drive

  http://support.Microsoft.com/kb/944292

  Run the System File Checker

  Right-click on command prompt and select run as administrator

  Type sfc/scannow

  Press enter

  Note: there is a space between sfc and / scannow

  How to analyze the log generated by the SFC Scan file:
  http://support.Microsoft.com/kb/928228

• In Outlook Express, when I type in the first letter of an e-mail address that is in my contacts, the dropdown does not close when I click the right address.

  Original title:

  Under XP, when I type in the first letter of an e-mail address that is in my contacts, the dropdown does not close when I click the right address. What a nuisance! Also, when I go to create a new e-mail message, an address of my contacts appears in no particular place, making it impossible to complete the message.

  Hello

  I suggest you turn off Auto complete and then check if you face the same problem.

  a. open Outlook Express.

  b. click on Tools.

  c. click on Options.

  d. click the send tab.

  e. uncheck the e-mail address automatically complete when composing box.

  f. click OK.

  Turn Auto complete and test again to see if the behavior is better. To activate it again, follow the same steps as above, but put a check mark in the box.

• "USB does not recognize the device.

  After four years of working perfectly, my Acer Aspire with Windows Vista Home Premium has suddenly decided to generate warnings "USB does not recognize devices" for all external references except a network controller Linksys that needs to be changed around the ports to operate and has constant warnings "that works better on a 2.0 port." Advice please, very confusing Norfolk UK.

  See if it helps:

  "USB device not recognized" error keeps popping up and USB devices do not work
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/USB-device-not-recognized-error-keeps-popping-up/6be4581d-8fbd-407F-815E-b475c35ca586

• USB does not fit in the printer

  Have a deskjet 1050a and USB does not fit into the printer.  Help

  Thanks I found one.  Printer downloaded and everything got set up.  (except that it took me 2 days to do it).

• Problem of USB ports: remove the material does not work. It works on different computers for the same USB devices

  Original title: problem of USB ports:

  I have a computer dell laptop inspiron d1420 provided with Windows vista and I have upgraded to Windows 7 ultimate, I noticed that when I plug in a USB mass storage, when I try to remove it, I don't get the safe delete the message and lately when I try to remove it, I keep getting the message He's busy and I can't remove it. I tried the same USB on another PC and I have no problem at all. I connected a printer, USB cable and wondows llok have not the driver or didn't install the printer, he left as a device not specified with the name of the printer, but I can't print. I tried with another PC that is also running Windows 7 ultimate and I have no problem, windows has installed the driver, because I used the same printer and the same cable. What is the problem with my USB 4 ports and how to fix?

  Hello

  When you get this message while trying to remove a USB, it's basically a lock for this USB device by some process running on the computer. If we know which process is this locking mechanism, we could also find which Service is associated with this problem in the computer.

  To check this, you can use a program called Process Explorer. You can download this program from the following link. Once downloaded, extract the contents of the zip downloaded to a folder on your desktop. Inside this folder, you will see a file by the name of procexp , which is the executable for Process Explorer. The download link is:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  First, plug the USB to one of the USB ports. Then, once you have the executable to Process Explorer, right-click on it and then click run as administrator. Please allow all guests UAC can occur. Once the Process Explorer is running, please follow these steps to search for processes using the USB at the moment:

  1. click on Searchand then click on manage to find them or DLL on the options menu at the top.

  2. then in the pop - up which will turn up next, type the drive letter for the USB drive connected to the computer (for example G: or H:) right now and click on Search.

  3. he should then display all instances of the process that is using this USB at the moment with the corresponding process ID (PID).

  Now, once you have the names of processes using the USB at this time, you can terminate them by clicking on them and then clicking on Manage close. Once this is done, you should be able to eject the USB safely.

  I would like to ask the names of processes lock the drive in your computer. This should give us an idea of what we might have to take the next.

  In addition, for the other issue that you mentioned, in which the computer does not automatically and correctly detects the printer when it is connected to the computer, I suggest you to check whether or not your computer Plug-and-Play service is set to automatic. Here's how you can do this:

  1. press the Windows and the R on your keyboard to get to the top of the run box.

  2. type Services.msc in the run box and press enter on the keyboard. Allow all UAC prompts that may coming up next.

  3. once it opens the window of the Services for you, scroll down to the Plug-and-Play service and double-click it.

  4. in the properties box that will come next, the Startup type should be set to Auto and the Status of the Service must be started. If this isn't the case, please put these values.

  5. click on apply then OK, close all windows in the computer and restart the computer once.

  Once these steps was performed, please check if the problem remains the same. We know the results.

  I hope that these steps raises you in the right direction in order to solve this problem. Don't answer if you still need assistance, we will be happy to be of assistance.

• I have published my muse built Business Catalyst site and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  I recently published my muse built the Business Catalyst site for preview and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  Hello Jimw93000314,

  Are you preview site in the edge browser? When you preview the page in the browser Muse create a local server to give you the preview in the browser. With the edge browser, there was a reported issue to access the local server.

  Please click the link below that shows the steps to enable the browser to edge.

  http://StackOverflow.com/questions/30334289/cant-open-localhost-in-Microsoft-edge-project-spartiate-dans-Windows-10-APER cu

  I'm sure this will help.

  Kind regards

  Vivek