Stupid newbie question for A1

Similar Questions

• Newbie question for the Oracle application server

  Hi Master,
  a DBA I am interesting to broaden my skill with learning on the application server.
  I knew that in the past before Weblogic bought by Oracle, Oracle, always using Oracle application server.
  Now with the Weblogic gaining more popularity on the market, which is the product the value of learning and get certified.
  
  Is it still useful to take Application Server 10 g or go with Weblogic. in certification path, Weblogic 10 g.
  WebLogic now replaces the Oracle application server, average abandoned Oracle Application Server?
  
  Please enlighten me and thank you for your help
  
  Lie

  Question if I go for Oracle WebLogic Server 10 g Administrator Certified Expert System it will be good to work with 11g thus?

  Make it part of the same system (now). Like WebLogic is the portal and the Jukebox, forms etc. are the records.

  What book other than the documentation that you have found the right one for learning.

  Yet to find one, Oracle documentation was OK.

  Is it better to learn the Linux or Windows version?

  Both are very well, choose the operating system you know better.

  Best regards

  mseberg

  I built my Middleware on Linux 64-bit test. Note that the 32-bit version allows to run Forms and Reports Developer.

  Beware of pre-installation tasks

  Install the Oracle database
  Linux RCU (repository creation utility)

  Database

  Use an existing database. (And it worked)

  My test was divided into four main parts: (in this order)

  Installation of the regional coordination unit
  WebLogic Server Install
  Install JRocket
  Forms and reports Install

  According to me, it took me two or three times to do things. (or at least work)

  I found myself with these URLs in the end:

  Administration Server Console http://Host/console 7001
  Enterprise Manager Console http://Host/em 7002
  Enterprise Manager Agent http://Host/emd/main
  Oracle Forms http://Host/formes/frmservlet 9001
  Oracle reports http://Host/rapports/rwservlet 9002

  So far, I have only an addition to my Web Page:

  http://www.Visi.com/~mseberg/compile_forms_on_wl.html

  As always this work orders:

  ./opmnctl status
  

  I was able to add PHP after you apply the hotfix 9292625.

  Note of Oracle that I found useful

  854117.1

  Published by: mseberg on May 20, 2011 14:16

• Stupid newbie question... is open source identical to the SBF

  I just wanted to know if this

  https://opensource.Motorola.com/SF/go/projects.DroidX/FRS.droidx_source_froyo

  is the almight SBF that everyone was looking for?

  # The SBF file that wants that everyone is a file that can be used to restore the phone to the State of origin from the manufacturer.  They wipe the phone and replace all data on the phone.  It's like wiping your hard drive on your computer and reinstall the operating system.

• Stupid newbie question

  What most people use to transfer files to their video?  WMP?   Had used iTunes in the past, but guess I have to go to the option to purchase/WMP mp3 Amazon.com?

  DPW, Winamp, WMP and MediaMonkey are good choices.

  MSC, Winamp and the good-old-drag ' drop. I think that MediaMonkey too, but I'm not sure.

• Newbie Question: What should I put in for "Hostname" in the DNS Configuration during install ESXi

  Note: I'm not a professional but rather an amateur trying to test the power of virtualization technology. I understand the IP addresses and how to configure my router, Setup static IP address and build my own computer, but I have some limited knowledge when it comes to the configuration of the servers. All I want to do is use this ESXi server locally in my house to run several operating systems on one physical box. I really don't want to have a server on the internet, I think that Comcast doesn't let me run the servers with dynamic IP package I have. In any case, here's my problem:

  I followed with the installation of the link video tutorial ESXi in the intro email vmware sends you after registering. I'm around the 14:30 mark minute now where we are the management network configuration in the configuration menu of DNS.

  The tutorial guys sets its hostname to something he obviously installation but mine appears as "localhost.hsd1.ca.comcast.net". I do not understand what I do when I set up a host name - and as I said above, I don't want to be put in place a server on the comcast network.

  I think I'm a bit confused and don't know what to put in host name. I tried "localhost" and also "localhost.hsd1.ca.comcast.net" but hen t when I chose "network of test management", I got a message of failure for hostname.

  Sorry if it's a super newbie question, but I will not continue to implement virtual machines or what then if this setting is incorrect. I appreciate your time in reading this / to help me. Thank you.

  UPDATE: Ok, so since I'm impatient, I tried just letting the host name to what it was and continues with tutorial and realized that I could simply type the address static IP address from my ESXi server in my web browser from another computer on my home network to get the VI of the esxi Server client , then I typed just 192.168.1.50 which is that I put it was and it was successful! Is there a reason to set a host name then?

  So, my next question becomes: can I run my windows XP 64 OS at the same time as the ESXi Server? Each are installed on different disks in the same physical box, but this computer is one of my main computers that I work on in windows every day so ideally I would have ESXi running but also be able to use the base operating system. Is this possible or am I just dreaming / confused?

  Your welcome hardnesses, I think you can try to re-insalling ESXi with the hostanme you want, or you can connect to the existing installation with an unsupported option and try the same thing.

  Concerning

  Anil

  Save the planet, go for green

  If you have found my reply to be useful, feel free to mark it as useful or Correct.

• Hardware blackBerry Smartphones Dumb newbie question! :)

  Hi people,

  I'm new in the world of the blackberry and I'm about to take the plunge with a unlocked sim-free BB Bold to use in the United Kingdom on Vodafone. I read on the differences of software between BIS and BES and would go for a set - up BIS. My dumb newbie question is equipment arrives in version BES or BIS or not?

  Thanks in advance and do not hesitate to make fun of my madness

  craigdh wrote:

  Good answer Xandrex. However I'm still not clear as to the issue of equipment, I asked. The reason why I am wanting to buy "BOLD" a separate contract is.

  1. it will work a little cheaper over the life of a contract.

  2. I will get my "BOLD" much faster.

  3 UK networks have a reputation for crippling features in high-end etc phones then charge you more to get similar functionality via one of their services.

  4. they are very slow to provide updates of the firmware on their own brand of appliances.

  There was a little insinuation in my answer: basically, you buy a mobile phone, so you get a BIS/BES contract with a carrier who takes in charge that the mobile phone. A "BOLD" can be used like BIS or BES, it depends on the company.

  On the price, I'm sure the phone deal + contract is always cheaper than a "BOLD" (retail and not eBay from some guys) then a contract which is usable (that is, no GoDaddy or 0.01GBP / KB).

  for the speed, you are the one who knows.

  The thing of the cripping: the thing is, the updates are provided only by the suppliers (they get a barebone RIM OS, then add their stuff like facebook or AOL). Even if you buy a single "BOLD" without a contract, if you want to upgrade the regular way, you wait fot your carrier to publish the upgrade. Or you can do the regularly (which can be made with or without the purchase contract at the same time).

  HTH

• 2 blackBerry Smartphones newbie questions: do I need it, and how I spoil my phone?

  Sorry for the newbie questions:

  My IT has already set up my phone to receive email from their Blackberry Enterprise Server.

  (1) do I still need to install the desktop software?  Given that I can transfer files via Bluetooth from my laptop and my contacts/calendar/notes are stored on the Exchange Server, is there any point?

  (2) if I do not need to install it, given that my email is already working with BES, and the Office installation configures email settings, how do I keep the new Desktop install to mess up the current configuration of e-mail?

  Of all the notes of support on the software, looks like more trouble whereas at this stage.  I really need to treat it?

  Thank you.

  Janimal

  Hi and welcome to the Forums!

  Janimal wrote:

  (1) do I still need to install the desktop software?  Given that I can transfer files via Bluetooth from my laptop and my contacts/calendar/notes are stored on the Exchange Server, is there any point?

  There is not much need of DTM, but it is convenient to update the OS of your BB. Sometimes there will be releases of minor bugs corrections and such to your BB - DTM will be meaningless and install them, while updating wireless could not detect them. For a major OS update, you want DTM, as it will do a backup/complete restoration of your BB, including configuration settings, and others so that you don't have to redo those. But, to your e-mail, calendar, contacts, etc. - you are right, it is useless given that your Exchange Server is actually your master with your BB being actually a backup of that (in a sense).

  In addition, USB drivers (which are part of the package DTM) are necessary in order to charge your BB via your laptop USB. You can download and install all the USB drivers if this is the only part of the DTM you want.

  Janimal wrote:

  (2) if I do not need to install it, given that my email is already working with BES, and the Office installation configures email settings, how do I keep the new Desktop install to mess up the current configuration of e-mail?

  When you install it, it will ask if you are in a company - say Yes and it will install properly. Installation when your PC is connected to your corporate network and your Outlook is open. Who will get the best and fastest configuration. When you install, do not let it select the functions of auto-launch... If you wish, attach your BB and manually run the DTM.

  Of all the notes of support on the software, looks like more trouble whereas at this stage.  I really need to treat it?

  Thank you.

  Janimal

  Basically, on the whole, I vote 'YES'. You get the USB charging. You can save if you wish. You get the device OS and other updates. Most of the reported problems are people using it to synchronize via USB things - you won't do that because most of your stuff will be syncing via BES OTA. Other things, you can simply drag-and - drop (music, videos, etc.). .. .follow these instructions (use the latest 5.0 DTM):

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=BlackBerryDesktopSoftware&thread.ID=3...

  DL the latest version here:

  http://NA.BlackBerry.com/eng/services/desktop/

  Good luck!

• A LOT of Newbie Questions blackBerry smartphones. (Must be the easy answer!)

  Good, please excuse my ignorance... guys xD

  I just bought two s BlackBerry Curve 8530 from Sprint. I'm pretty tech savvy, but there are some things about this phone, I can just enter in two or three days I got em:

  Deleting photos: Well, then I'm in my media folder, in the images. I selects a photo and press the BlackBerry button and select Delete. Then he said: it is read-only, and when I remove it, the icon is still there. I tried to turn on/off the device, and it's still there. Thought this one myself. I plugged it up to the Desktop Manager and all of a sudden all the photos I had taken appeared. I was also able to delete using the "BlackBerry" button and then "delete". It doesn't give me that read this option.

  Saving images: So, for some reason I can't save more photos. I don't know even how I saved the first 12 photos I have taken... but now it won't save any more. What the hell happened? xD I have a 2GB card in my phone... surely these 12 images didn't fill in this card... Thought this one myself. I plugged it up to the Desktop Manager and all of a sudden all the photos I had taken appeared.

  Buy ringtones: On my old phone LG, I used to buy ringtones RealTone Jukebox... where they had extracted from songs that I could download for a crazyhigh. Where can I buy the real music ringtones for BlackBerry? What I do myself?

  Media moving to my PC?: I went through the music store of Sprint comes with my camera, and two purchased songs. I want to know if I can get these songs out of my BlackBerry smart phone and my PC. Also, if anyone knows what format they are in (if they bought before Sprint music store).

  To buy another memory card: Where the best place to buy one of these mini memory cards? One of my friends like, a 24 a concert... and I currently have a 2 gig (who, I should mention, is more fricken memory I have in the computer I do not write about this time xD) how can I find out if the card is compatible with my camera?

  WTF @ Redlight?: From time to time (we can always do that, I'm not sure), the little red light at the top of my unit starts to blink even if I do not have a weak battery or not new messages. It first happened lastnight when a friend sent me 3 IMs at once. I had to reboot my device and I think that he is stopped. Earlier, it happened again (I had several new messages) and this time whenever my display is on, the light was red only flashes do not. It can always be like this now, but I'm not sure. My camera is in the other room and I'm too lazy to check xD. Why would he do that? How can I get him to stop?

  Turn off the sound of the camera?: My camera makes the shutter of the camera, even when noise silence. Is there a way to stop this?

  
  

  Auto keyguard: I have EPIC hand-dial to people purse. In my view, it has a keyboard lock button in the dashboard of BlackBerry (that is the correct term for this?) But I want to get to the place where the keyboard auto-lock after a certain period of time. Is this possible? I saw somewhere about pressing the button mute will lock it... who is the top/center of the unit button?

  Key blackBerry?: Well, don't laugh, I know that I'm retarded. But, the key to the left of the beach towel... than the devil who called? He got the BlackBerry logo on it... is what he called the BlackBerry button? I know, I know, I'm retarded and could probably flip through the manual to figure it out... but still. I might as well ask now xD

  
  

  Choose the icons to display on the main screen: When I added an e-mail address, he put an icon on my main desktop, in the row of icons at the bottom of the screen. (where is my background image and all that). Can we choose the icons that we want to display on the main screen? I have really now, my calendar icon that I know that I use. I'd love to move the keyboard lock button here though... is it possible?

  Speaker?: How can I get speaker? xD

  Theme Studio (software, no associated device): Anyone used this? It is quite easy to use? I am tech savvy, but I don't want to just download a ton of programs on my PC that I won't use xD I'm working on the Desktop Manager and it takes forever. I want to make themes, but I'm curious to know how easy to use this program is... graduate to use design or if it would take a graph xD

  Well, then, I think that... Think THAT that's all. I can change this highest position (if we are allowed to edit) to delimit what questions have been answered. I hope someone sees this soon enough, that I don't know how "living" these forums are.

  Thanks for looking, and I warned you... they have been the newbie questions! xD

  -Darky Delacroix

  Welcome to the SkippyTheWonder forums.

  SkippyTheWonder wrote:

  Good, please excuse my ignorance... guys xD

  I just bought two s BlackBerry Curve 8530 from Sprint. I'm pretty tech savvy, but there are some things about this phone, I can just enter in two or three days I got em:

  Deleting photos: Well, then I'm in my media folder, in the images. I selects a photo and press the BlackBerry button and select Delete. Then he said: it is read-only, and when I remove it, the icon is still there. I tried to turn on/off the device, and it's still there. Thought this one myself. I plugged it up to the Desktop Manager and all of a sudden all the photos I had taken appeared. I was also able to delete using the "BlackBerry" button and then "delete". It doesn't give me that read this option.

  Saving images: So, for some reason I can't save more photos. I don't know even how I saved the first 12 photos I have taken... but now it won't save any more. What the hell happened? xD I have a 2GB card in my phone... surely these 12 images didn't fill in this card... Thought this one myself. I plugged it up to the Desktop Manager and all of a sudden all the photos I had taken appeared.

  Buy ringtones: On my old phone LG, I used to buy ringtones RealTone Jukebox... where they had extracted from songs that I could download for a crazyhigh. Where can I buy the real music ringtones for BlackBerry? What I do myself?

  There may be an icon on the home screen of your camera to buy ringtones. Or you can open the browser and go to http://mobile.blackberry.com. There is a link of ringtones that you can click

  Media moving to my PC?: I went through the music store of Sprint comes with my camera, and two purchased songs. I want to know if I can get these songs out of my BlackBerry smart phone and my PC. Also, if anyone knows what format they are in (if they bought before Sprint music store).

  It is recommended to buy a microSD card to store your multimedia files, if you run out of memory on your device.

  
  

  Depending on what OS is your BlackBerry tells you what size you can buy a microSD card. You can check under Options | Topic (will appear as v4.xx.xxx). Look at the table on the following link to see what size you can get - http://www.blackberry.com/btsc/KB05461

  
  

  On the BlackBerry, go to Options | Media Media Card recommended parameters are:

  
  

  Media card support: WE

  Encryption mode: NO

  Mass storage support: WE

  Auto enable mass storage Mode when connected: YES

  
  

  Mass storage mode allows your BlackBerry to act as an extra drive when it is connected to your PC. It will appear as an extra drive letter in Windows Explorer. So you can just drag/release the multimedia files on your memory card

  WTF @ Redlight?: From time to time (we can always do that, I'm not sure), the little red light at the top of my unit starts to blink even if I do not have a weak battery or not new messages. It first happened lastnight when a friend sent me 3 IMs at once. I had to reboot my device and I think that he is stopped. Earlier, it happened again (I had several new messages) and this time whenever my display is on, the light was red only flashes do not. It can always be like this now, but I'm not sure. My camera is in the other room and I'm too lazy to check xD. Why would he do that? How can I get him to stop?

  Here is an article that describes the status of the LED

  http://www.BlackBerry.com/BTSC/KB03897

  If you want to disable the LED check this KB article

  http://www.BlackBerry.com/BTSC/KB10721

  Turn off the sound of the camera?: My camera makes the shutter of the camera, even when noise silence. Is there a way to stop this?

  Check out this post

  http://supportforums.BlackBerry.com/T5/BlackBerry-Pearl-BlackBerry-8100/turning-off-the-camera-Shutt...

  
  

  Auto keyguard: I have EPIC hand-dial to people purse. In my view, it has a keyboard lock button in the dashboard of BlackBerry (that is the correct term for this?) But I want to get to the place where the keyboard auto-lock after a certain period of time. Is this possible? I saw somewhere about pressing the button mute will lock it... who is the top/center of the unit button?

  Key blackBerry?: Well, don't laugh, I know that I'm retarded. But, the key to the left of the beach towel... than the devil who called? He got the BlackBerry logo on it... is what he called the BlackBerry button? I know, I know, I'm retarded and could probably flip through the manual to figure it out... but still. I might as well ask now xD

  Called the menu button

  
  

  Choose the icons to display on the main screen: When I added an e-mail address, he put an icon on my main desktop, in the row of icons at the bottom of the screen. (where is my background image and all that). Can we choose the icons that we want to display on the main screen? I have really now, my calendar icon that I know that I use. I'd love to move the keyboard lock button here though... is it possible?

  If you select an icon, click the menu button and choose move. You can rearrange the icons. The icons in the top 5 on the list will be those along the boittom when not looking at the full home screen.

  Speaker?: How can I get speaker? xD

  Can try to hit the key ' $' as a shortcut to activate speaker. During a call, you can click the menu button and choose the speaker phone option in the menu

  Theme Studio (software, no associated device): Anyone used this? It is quite easy to use? I am tech savvy, but I don't want to just download a ton of programs on my PC that I won't use xD I'm working on the Desktop Manager and it takes forever. I want to make themes, but I'm curious to know how easy to use this program is... graduate to use design or if it would take a graph xD

  Not sure about that sorry.

  Well, then, I think that... Think THAT that's all. I can change this highest position (if we are allowed to edit) to delimit what questions have been answered. I hope someone sees this soon enough, that I don't know how "living" these forums are.

  Thanks for looking, and I warned you... they have been the newbie questions! xD

  -Darky Delacroix

• Newbie question - javascript - php HTML5 and HTTPS w

  Hi all

  Newbie question...

  I'm having a problem with browsers, mac and javascript...

  simple story:

  1. If I put the test on site NO SSL folder - everything works ok

  2 but if I put the same test on HTTPS site folder - MAC SAFARI gets / data displays ok but firefox MAC and Chrome don't receive data

  Q: why not? How do I fix this so work all browsers?

  ---

  CONFIGURE LIKE THIS...

  Page1.html

  Gets the data with this line...

  What was...

  $.get ('getdata.php', function (data, status) {})

  ... etc.

  also tried this (absolute ref)...

  $.get ('https://mysite.com/getdata.php', function (data, status) {})

  ... etc.

  and displays the data on the same page page1.html

  Safari for MAC = works but firefox and chrome do not display data HTTPS site but all work 3 over HTTPS no alternate test site. (using only this local demand = $.get ('getdata.php', function (data, status) {}))

  BTW: if I manually go to getdata.php he gets php data and display the data in json package very well

  Q: How can I test / solve this problem, so all 3 browsers work on HTTPS site?

  Curious to know why MAC SAFARI OS 10.10.4 was an error?

  There are differences in the way different browsers support SSL.

• Newbie question - how to effectively check if photo is part of the selection

  Hi all

  Sorry for the newbie question, but I do not know how to solve, and I'm sure that there is a quick and easy answer to this:

  My goal is to get all the 'stack heads' (photos with Position 1 in batteries) selection ('photos' below).

  for I have, make photo in ipairs( photos )
  local date = picture:getFormattedMetadata("Filename")

  if Photo:getRawMetadata( "isInStackInFolder" ), then
  - Photo is in a stack
  local photoHeadOfStack = picture:getRawMetadata("topOfStackInFolderContainingPhoto")

  local stackPos = picture:getRawMetadata( "stackPositionInFolder" ), - get the position in the stack
  local photoHeadName = photoHeadOfStack:getFormattedMetadata("Filename")

  app:logVerbose(' Photo nb ^ 1, name ^ 2 is in a stack with the position ^ 3 ', i, date, stackPos"")

  if stackPos == 1 then
  - photo is the master of the battery
  stackTop[#stackTop+1] =photo
  app:logVerbose(' picture ^ 1 is the top of the stack ^ 2 ', date, #stackTop)

  -check if couple if it is correct
  elseif photos. photoHeadOfStack then
  app:logVerbose(' picture ^ 1 is in a stack, but not over the top. ") (Top of the stack already selected", date)

  other
  stackTop[#stackTop+1] =photoHeadOfStack
  app:logVerbose(' picture ^ 1 is in a stack, but not over the top. ") Top of the stack ^ 2 - ^ 3 ", date, #stackTop, photoHeadName)

  end
  end
  end

  
  

  In the if structure in the center of the Position in the stack control, if the Position is not 1, I would check if the photo to the stack ("photoHeadOfStack'") is part of the 'pictures '. I tried 'elseif photos.photoHeadOfStack then' and ' elseif photos [photoHeadOfStack] then ' but it doesn't work-> This elseif is never true even if 'photoHeadOfStack' part of the 'photos'.

  Any way to have this check done without checking the photos "manually"? (via e.g. a loop for)

  I'm sure that Lua offers this, but I do not know how...

  
  

  Thank you for your support!

      --[[ This code creates "stackTops", an array of LrPhotos that are the
      tops of all the stacks containing photos in the array
      "photos". ]]
  stackTopSet = {}
  for _, photo in ipairs (photos) do
      local stackTop = photo:getRawMetadata ("topOfStackInFolderContainingPhoto")
      if stackTop ~= nil then stackTopSet [stackTop] = true end
      end
  stackTops = {}
  for photo, _ in pairs (stackTopSet) do table.insert (stackTops, photo) end
  

• Newbie question: how to extend in unallocated disk in a VM XP?

  Hi all:

  This is a newbie question, but looking for answers only left confused me...

  I have VM Fusion (v2.0.6) running on a MAC (OS X - Snow Leopard) with an XP VM. When the XP VM has been implemented, it has been implemented with 20 GB hard drive space. I used VM Ware Virtual Machine settings to increase the disk space of 50 GB. (I left the "pre-allocate disk space' and 'divide into 2 GB files' options unchecked.) I don't have any snapshots during execution/implementation.

  However, my current XP VM flashing me alerts "low disk space" - I see only about 1 GB of free 20 GB (I don't see the 40 GB listed in 'My Computer'). When I use the Services of management of disk in XP, I see a disk 0 20 GB System Partition with 30 GB of unallocated space.

  How can I extend the current Parition (System) in the space of 30 additional GB? And do I have I done this to begin with?

  Thanks in advance!

  Take a look at: resizing of the ramdisks with step by step Instructions

• Fusion/Windows 7 tips & questions for a beginner

  Hey guys (and girls) I've been a linux user especially lately so I more or less missed the boat on windows 7 but I'm looking to load on my MBP, but I have a few newbie questions if can help people.  I tried to do a search, but I think that my terminology or the lack of good conditions got in my way.

  Some background information, I use a unibody MBP with 4 GB of ram 5.1 which has Snow Leopard and VMware fusion 3.01.

  I am interested in what would work well with the merger of two ways, bootcamp vs install a vmdk and 64-bit vs 32-bit...

  First of all is it an advantage to running vmware fusion with bootcamp, IE merge use the bootcamp partition?  What I see better performance if I instead of use the bootcamp created a virtual machine (vmdk) within the merger?

  Second question is about 32-bit vs 64-bit. I'm under 4gig of RAM which I will devote only 2gig in vmware. Is it interesting (stability, or performance) to the use of 64-bit within the fusion flavor (vm installed not bootcamp) or I'll be better with 32-bit installation?

  If I'm melting point using the bootcamp partition, is third question - interesting to settle current with the 64-bit or 32-bit.  It's merger would provide more performance with the bootcamp windows 7 32 bit, and vice versa (or it does not matter)

  Fourth question, seems, the fusion installs things when you use the bootcamp partition and I guess I'll need to install the tools as well.  That will cause problems, or headaches when I boot physically in training camp, that is, drivers of devices for non-existent devices. What video, nvidia 9600 m in bootcamp vs virtual gpu fusion provides.  I can't wait to see problems when I turned off and restart under bootcamp.

  Last question, I will visit the hell of activation if the bootcamp partition uses two cores, but I just dedicate a molten core when you point the merger to use the bootcamp partition. I don't want to always have to re - activate win7 because when I boot in bootcamp, he sees two hearts but merger only when.

  Thanks in advance

  Mike

  take a deep breath... OK... =)

  Firstly there is an advantage to running vmware fusion with bootcamp

  You get better performance out of hard in this instance. With the help of a physical disk is not the OS X volume would be better than BootCamp, but of course only applicable on a Mac Pro. Rationale: with multiple partitions, the needle on the hard disk has a long way to the second partition, back and forth all the time between Windows and Mac does travel. A hard, as a general rule, would include a contiguous space due to the Mac file system optimizing the layer of block on the fly.

  The advantage of using BootCamp is if you need to take advantage of the full potential of the Mac hardware in a dedicated Windows environment. Such use might be to, say, play games of high quality, latest (Call of Duty, anyone?), at higher resolutions / great detail. Ditto for just about any application for Windows which needs a beefy video system (OpenGL rendering, CAD, stuff like that)

  Is it interesting (stability, or performance) to the use of 64-bit within the fusion flavor (vm installed not bootcamp) or I'll be better with 32-bit installation?

  I would say that no, there is no significant advantage to the use of 64 vs 32 bit in a virtual machine. Stick to 32, it is more compatible with the software and any equipment that you choose to give to Windows (driver for 64-bit stuff support is usually OK, but there is no compelling reason to do it in a virtual machine)

  If I'm melting point using the bootcamp partition, is third question - interesting to settle current with the 64-bit or 32-bit.

  Windows 7 is not supported by BootCamp by Apple, so probably 64 bit will not be 100% working drivers.

  Fourth question, seems, the fusion installs things when you use the bootcamp partition and I guess I'll need to install the tools as well.

  We install tools (drivers and additional software), as well as some tips for handling activation. So we keep some of the files that Windows uses to verify that it has been activated, but due to the change in material Windows must activate two times. Record us each activation, detect when Windows runs in our VM and present key information and activating appropriate to the operating system (to keep him from having to activate every time you pass ="

  What video, nvidia 9600 m in bootcamp vs virtual gpu fusion provides. I can't wait to see problems when I turned off and restart under bootcamp.

  I did not talk about all issues related to the video does not when it is started normally. Windows detects that hardware is present at startup, check if it uses drivers and goes from there.

  Last question, I will visit the hell of activation if the bootcamp partition uses two cores, but I just dedicate a molten core when you point the merger to use the bootcamp partition

  N ° again, we keep the profile "enabled" and save it.  When the BONE is introduced in the merger, we use our activation profile.  When you started in native mode, it uses that have never appeared by activating in Bootcamp.

  The direct answer to 'can I use bootcamp or hard' would be: depends on what you want to do with the virtual machine.  If it's general things, you're good... If you're a gamer or CAD designer, BootCamp is a good option.  =)

• NFS Newbie question

  Sorry for the newbie question.

  I have a small test system I try to enable NFS on.  Very low indeed. Basically just a little sin, the switch, the pc and esxi (3.5u4) box.

  all devices are on the same subnet. ESX is single hosted to the switch. (I know, bad practice to use the interface of mgmt for storage, but just try to keep things simple for this)

  I tried to create a second instance of vmkernel with a different ip address on the same subnet, but the GUI yelled at me.  I tried to find a way to enable NFS on the existing management interface, but could not find a way to do it. I googled around and I saw that I need to create a vmkernel another example to enable NFS.

  So the question is, is it possible to have a box unique esx hosted with NFS, mgmt and storage enabled without VLANing it?  Am I missing something obvious?

  Thank you

  Chris

  Yes it is possible as mgmt have already vmkernel, you could simply add network (same subnet) storage & you have not need to allow anything else on ESXi.

  Just go to configuration-> storage-> add storage

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• Newbie question re: 'break' a path

  Hello... Sorry for the newbie question... I imported this vector image in Illustrator CS5:

  

  I want to isolate each of the children, so I can use the live paint to color to each child a different color.

  I can do this:

  

  But I want every child to be a different color. And it's all a way.

  Thank you.

  I find the tool knife difficult to control unless it is a straight line, but you can draw a path and with the selected path only, choose object > path > divide objects below. The image below shows a path that I draw pretty closely with the pencil tool. You can also correct and refine tracks selected by drawing the wire segments of them using the pencil tool and all in using it, holding that alt will smooth the path. To control how the pencil tool behave click twice on the tool in the tool box and it will display a window with options.

  

  However, in this case, most likely I'll do it in another way.

  First of all, copy the path and paste it at the front 5 times (for 5 children). While the path top of the stack is still selected, change the color of it with the color for the first child, and then using the pencil tool as described above, correct the path to limit it to the silhouette of the first child. The red line on the image below shows where I've drawn with the pencil tool to limit the upper path for the first child. Important during the correction of the paths with the pencil tool is to begin and end the segment based on the original path, or if you start or finish too far from the path, you will create a new path instead of correct that you selected. After correcting the path for the first child, you can select the following path and continue as it fix the paths for each child. Alternatively, instead of paste all roads at the beginning you can stick behind or in front after having corrected the path for each child. Also, except for children at the ends, he must correct the path for other children with both hands. The advantage of this method in the first (with dividing the items below) is that you can move and the path of each child space independently and the hands will look always complete.

  

• A few newbie questions

  Ok, I am a fanboy of Adobe, Photoshop/Illustrator ACE but I'm a video / graphic guy My employer is about 'apps' that they average / envy = applications that run on all smartphones modern and major players in the Tablet world. I had a divorce with writing code about 4 years ago (we all have two happy summer separated from eachother) but it feels like I will be together soon.

  Looking for some quick info to get used to the speed (note that I Master Collection CS5.5):

  1. Type of code: Action Script 3 ? HTML? Or lazy build in Flash?
  2. We would start Flash or Flex SDK?
  3. Currently, they want to read on an iPad... then tomorrow a Playbook... but always on an iPhone and EVO... is it something to be considered early in the process?

  I realize, these are newbie questions VERY and it's a long way to follow, thank you for contributing to the trip!

  Nick

  Hi Nick,

  I think it depends on type of content/content/deployment.

  If it's only video content to be played in standalone or web apps that look like native and support wide range of devices - then your suite already comes with Dreamweaver 5.5 - who has for example jQuery Mobile for web based application development/deployment and PhoneGab for native-app - all code development with html/javascript and two of them takes charge of video content.

  With Flash CS5.5 you get timeline based development and authoring tools - but nothing in the simplified UI that comes with the spark in Flash Builder (Flex SDK). Outputs the CS5.5 Flash and Flash Builder 4.5 using the same development tools Adobe Air (more to read on the page of software development given).

  Oh: web development with Dreamweaver and jQM does not require App Store submission process required otherwise for the content generated with Flash CS/Flash Builder or with PhoneGap in DreamWeaver.

  Kind regards

  Peter