IP unknown 'show interface authentication session '.

We currently use 802. 1 x with EAP - TLS based machine authenctication and each example cisco has the IP address when you place an order show authentication session interface. Our of appears as unknown for the IP address. Authenticate us through ACS 4.0 and I can't find anything on how to cisco for that switch to retrieve the IP address. Is this a configuration problem or is there a function that we do not?

Hello

try running the command switch (config) #ip - analysis of device

I assume that the user is authenticated.

hope this helps

Tags: Cisco Security

Similar Questions

  • Upgrade ACS 4.1 and 4.2 authentic session expired: challenge not supplied by the customer

    Hello

    I upgraded Cisco ACS 4.1 to 4.2, I device Cisco Access Control 1113, as soon as I upgraded I get error in newspapers failed

    "Authentic session expired: challenge not supplied by the customer ', what is wring with that? Plesae help me

    Thank you

    I would really appriciate if mark you this topic as resolved so that the other can take advantage out of it.

    Kind regards
    Jousset

  • Show Interface Tunnel explaination

    Hello

    Can anyone explain me what this means:

    Show interface Tunnel

    Tunnel of transmission bandwidth 8000 (Kbps)
    Tunnel to receive 8000 (Kbps) bandwidth

    Is VPN bandwidth? If Yes, we change it?

    Thank you

    If yes, can we change it?
    Yes, you can if you run the Advanced IP Services feature (and above).

  • I just installed Firefox V8. I'm looking for the indicator which shows that my session is secure, when I go on a site known to make a payment online. Where this indicator?

    It is always used to be an indicator at the bottom of the screen (I think) that looked like a small lock, to show that you were in a secure session. What happened in Firefox V8?

    Credit Safebrowser

    Therefore, the lock is more part of Firefox; It has been removed from Firefox 4. The padlock shows that there is a secure connection, but does not provide any additional information. You could make a typographical error, and have always been connected to a secure connection. The lock was replaced in Firefox 3 with the Site identity button. Familiarize yourself with the Site identity button at the left end of the address bar:

       https://www.mozilla.com/en-US/firefox/security/identity/
   https://support.mozilla.com/en-US/kb/Site+Identity+Button
   http://www.dria.org/wordpress/archives/2008/05/06/635/

    You can install this module if you want:

       https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/

  • DistributedMember is null in the implementation of the Interface Authenticator?

    DistributedMember is null in the implementation of the authenticator Interface.

    http://www.gemstone.com/docs/current/product/docs/JAPI/com/gemstone/GemFire/security/authenticator.html

    Main authenticate (Properties props, DistributedMember member)

    Check the credentials provided in the properties for the client/peer such as specified in the Member ID and returns the main partner of the customer/peer

    I'm trying to implement authentication. I DistributedMember object as null in the newspapers of Locator when counterpart try to join the distributed system.

    Even if I take the method AuthenticationFailedException authenticate; my Member is still able to join the system of Distribuyed. It's somehow connected to locator * .dat file?

    Messages processed on the thread "UDP incoming Message Handler" are messages of closure of the process itself.  I looked at the code that calls the authenticator and it always affects the null member ID in this case.  I don't know why, but it's what he does.  In addition, in this case it deals a membership VIEW and not a request to join the system.

    You can safely ignore the requests with a null member ID.

    The client authentication is not handled by the Locator well - it is managed by the cache servers when the client tries to connect to them.  Only process GemFire "peer" are authenticated by locators.

    I hope this helps.  I shall notify the Department tech pubs on this subject so that they can update the documentation.

  • Why the registry changes or the installation of security updates does not show in the session remotely from another server?

    Original title: the remote Sessions.

    When you install updates security directly on a particular server or change the registry, how is it that change is not displayed when you establish a remote session on this server to another server? My agency uses retina to analyze our servers for security flaws and he always report servers for missing patches or incorrect permissions on some registry settings. When you connect directly to the server, it ends up being false positive hits. Retina establishes remote connections to all servers in the domain to conduct its analysis. This has been an ongoing battle.

    Hi LadyDee68,

    Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

    http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

    Hope the helps of information.

  • Windows XP suddenly shows not authentic

    I know there have been other discussions on this, but could someone help me please?  I installed the windows updates today (about 25 of them) and when I restarted the computer it is a black screen and says that my copy of Vista is not authentic.  I assure you that it is authentic, and I have the product key at the bottom of my laptop I could fix if it would provide a screen that would let me!  I ran the diagnostic tool for MGA and this is what he says:

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->
    Validation status: invalid license
    Validation code: 50
    Validation caching Code online: n/a, hr = 0x80070426
    Windows product key: *-* - Q9CM8 - KTDKK-8QXTR
    Windows Product Key hash: OI3PQUp2nK/Ysh5U6MY15ORIfio =
    Windows product ID: 89572-OEM-7332166-00029
    Windows product ID type: 2
    Windows license Type: OEM SLP
    The Windows OS version: 6.0.6002.2.00010300.2.0.002
    ID: {484CB108-BF32-47FB-85FF-509BC8AA573F} (1)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows Vista (TM) Home Basic
    Architecture: 0x00000000
    Build lab: 6002.vistasp2_gdr.101014 - 0432
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: 2.0.48.0
    OGAExec.exe signed by: Microsoft
    OGAAddin.dll signed by: Microsoft

    OGA data-->
    Office status: 100 authentic
    Microsoft Office Home and Student 2007-100 authentic
    OGA Version: Registered, 2.0.48.0
    Signed by: Microsoft
    Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program may Explorer\iexplore.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->
    [File mismatch: C:\Windows\system32\Slsvc.exe[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\drivers\Spsys.sys[6.0.6002.17040], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\Slcext.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\advapi32.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\kernel32.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\rpcrt4.dll[6.0.6002.18024], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\authz.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\msvcrt.dll[7.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\samlib.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\ntdsapi.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\dnsapi.dll[6.0.6002.18416], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\ws2_32.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\nsi.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\user32.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\gdi32.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\msimg32.dll[6.0.6000.16386], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\powrprof.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\setupapi.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\oleaut32.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\ole32.dll[6.0.6002.18277], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\shell32.dll[6.0.6002.18393], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\shlwapi.dll[6.0.6002.18393], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\version.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\winmm.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\oleacc.dll[7.0.6002.18155], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\mmdevapi.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\wtsapi32.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\regapi.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\crypt32.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\msasn1.dll[6.0.6002.18106], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\userenv.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\secur32.dll[6.0.6002.18051], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\netapi32.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\psapi.dll[6.0.6000.16386], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\netrap.dll[6.0.6000.16386], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\wldap32.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\winbrand.dll[6.0.6000.16386], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\iphlpapi.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\dhcpcsvc.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\winnsi.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\dhcpcsvc6.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\gpapi.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\slc.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\gpsvc.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sysntfy.dll[6.0.6000.16386], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\winsta.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\nlaapi.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\ncrypt.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\bcrypt.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\mpr.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\credui.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\cryptui.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\wintrust.dll[6.0.6002.18169], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\imagehlp.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\dbghelp.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\mssign32.dll[6.0.6000.16386], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\wininet.dll[8.0.6001.19048], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\normaliz.dll[6.0.6000.16386], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\iertutil.dll[8.0.6001.19048], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\tapi32.dll[6.0.6000.16386], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\rtutils.dll[6.0.6002.18274], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\rasapi32.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\rasman.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\rasdlg.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\mprapi.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\activeds.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\adsldpc.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\atl.dll[3.5.2284.2], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\certcli.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\winscard.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\netplwiz.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\urlmon.dll[8.0.6001.19048], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\propsys.dll[7.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\xmllite.dll[1.2.1009.0], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\mlang.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\advpack.dll[8.0.6001.18702], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\apphelp.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\msiltcfg.dll[4.0.6000.16386], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\shunimpl.dll[6.0.6000.16386], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\devmgr.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\newdev.dll[6.0.5054.0], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\dwmapi.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\winspool.drv[6.0.6002.18392], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\cscapi.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\uxtheme.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\windowscodecs.dll[7.0.6002.18107], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\ntshrui.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\feclient.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\shdocvw.dll[6.0.6002.18392], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\browseui.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\imm32.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\msctf.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\duser.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\msrating.dll[8.0.6001.18702], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\ieframe.dll[8.0.6001.19048], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\msi.dll[4.5.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\mshtml.dll[8.0.6001.19048], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\msls31.dll[3.10.349.0], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\comdlg32.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\printui.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\cfgmgr32.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\puiapi.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\hlink.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\imgutil.dll[8.0.6001.18702], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\usp10.dll[1.626.6002.18244], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\inetcomm.dll[6.0.6002.18417], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\msoert2.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\ieui.dll[8.0.6001.19048], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\efsadu.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\mfc42u.dll[6.6.8064.0], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\odbc32.dll[6.0.6002.18362], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\oledlg.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\linkinfo.dll[6.0.6000.16386], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\query.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\clbcatq.dll[2001.12.6931.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\cabinet.dll[6.0.6001.18000], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\scecli.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\w32topl.dll[6.0.6000.16386], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\rpchttp.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\winhttp.dll[6.0.6002.18096], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\fwpuclnt.dll[6.0.6002.18005], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\ktmw32.dll[6.0.6001.18000], Hr = 0x800b0100

    Other data-->
    Office details: {484CB108-BF32-47FB-85FF-509BC8AA573F}1.9.0027.06.0.6002.2.00010300.2.0.002x 32*-*-*-*-8QXTR89572-OEM-7332166-000292S-1-5-21-2563385384-3911924453-4282512113Acer Aspire 5735 Phoenix Technologies LTD.V1.08 20080910000000.000000 + 000AE333507018400FA08090409GMT Standard Time(GMT+00:00)03ACRSYSACRPRDCT100100Microsoft Office home and Student 2007127AC4DC4E25CF732MXM4 YzjlYubqq53nK3cA75JpkQ plus 81602-921-3367097-68489 1

    Content Spsys.log: 0 x 80070002

    License data-->
    Software Licensing service is not working.

    Windows Activation Technologies-->
    N/A

    --> HWID data
    Current HWID of Hash: MgAAAAEAAgABAAIAAQAAAAAAAwABAAEAeqh2UpK9coV6f6Rhotaq6fL0vJA6U6xWKoU =

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0 x 20000
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    APIC APIC PTLTD
    FACP INTEL CRESTLNE
    HPET INTEL CRESTLNE
    START PTLTD $SBFTBL$
    MCFG INTEL CRESTLNE
    SLIC ACRSYS ACRPRDCT
    SSDT BrtRef DD01BRT
    SSDT BrtRef DD01BRT

    Help, please!

    Thank you very much

    Julia

    It may be worth trying another 'door' :)

    Click Start

    In the search box, type

    SLUI 4

    and press the Enter key

    Follow the instructions - when the ansafone service you need, request NOT to answer. It should oblige the operator to pick up, which can solve your problem if all goes well, or ship you ot someone who can.

  • Account ghost or unknown shows in safe mode in Windows XP machine.

    Original title: Phantom account.

    Hello everyone, I hope that someone may be able to provide an answer to a problem, that I detected. I have a "ghost" or "ACCOUNT UNKNOWN" account username on my XP Home SP2 that I found when I went into safe mode and checked the properties-> tab security for one of my programs. This seems to be present in most of the software, but not all.

    The unknown user account is S-1-5-32-547 - can anyone tell me what it is or how it got there? Or, is there a need to worry?

    When I actually open via control panel user accounts, it is not listed. Only, I fell on it all by checking the properties on the software in safe mode.

    Thanks for any help on this problem / question.

    Kind regards

    Mr.Roger

    Hi Mr.Roger,

    By default, a built-in Administrator account is created when you install the Windows operating system. This account is only accessible in safe mode and to solve the problems of user account.

    Hope the helps of information.

    Concerning
    Joel S
    Microsoft Answers Support Engineer

  • Windows 7 build 7601 shows not authentic

    I, too, have problems with the declaration of Windows may not be valid. I have read the posts above (I'm not a geek, very limited knowledge, here) and I ran the scan which was published.  One of you people may be able to get back to life again. Any help is appreciated.

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->

    Validation code: 50
    Code of Validation caching online: 0x0
    Windows product key: *-* - 4F8HK - M4P73-W8DQG
    The Windows Product Key hash: Xs1iQgVeo0C + sObJxS7eu + FuBPQ =
    Windows product ID: 00359-OEM-8992687-00057
    Windows product ID type: 2
    Windows license Type: OEM SLP
    The Windows OS version: 6.1.7601.2.00010300.1.0.003
    ID: {513D6643-DEE2-4684-9BF6-7ECD1BBFEA4D} (1)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Home Premium
    Architecture: 0 x 00000009
    Build lab: 7601.win7sp1_gdr.120503 - 2030
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 100 authentic
    Microsoft Office Professional 2007-100 authentic
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {513D6643-DEE2-4684-9BF6-7ECD1BBFEA4D}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-W8DQG00359-OEM-8992687-000572S-1-5-21-1087875329-109924899-516532152TOSHIBASatellite C675American Megatrends Inc.. 2.10 20120618000000.000000 + 0006A043A07018400FE04090409Time(GMT-05:00) Standard is03TOSASUTOSASU100100Microsoft Office Professional 200712HZcz5TIkbMNFEZA0rGZmXgW4iHc =81605-907-2749213-658501 90B257BB1B0D716

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7601.17514

    Name: Windows 7 HomePremium edition
    Description: operating system Windows - Windows (r) 7, channel OEM_SLP
    Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00359-00178-926-800057-02-1033-7601.0000-3072011
    Installation ID: 016825597141849085276322575944065645876974098213988330
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: W8DQG
    License status: Notification
    Notification reason: 0xC004F059.
    Remaining Windows rearm count: 2
    Trust time: 01/10/2012 08:20:19

    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: 0x00000000
    Beyond: 0 x 0000000000000000
    Event timestamp: 8:1:2012 16:17
    ActiveX: Registered, Version: 7.1.7600.16395
    The admin service: recorded, Version: 7.1.7600.16395
    Output beyond bitmask:

    --> HWID data
    Current HWID of Hash: LAAAAAEAAQABAAEAAAABAAAAAgABAAEA6GGUpFgECo7Ap7hTqu3O/PoFLnM =

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: no, incompatible OEMID or OEMTableID
    Windows marker version: N/A
    OEMID and OEMTableID consistent: no
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    APIC TOSASU TOSASU00
    FACP TOSASU TOSASU00
    HPET TOSASU TOSASU00
    MCFG TOSASU TOSASU00
    CO-SUBMISSION TOSASU TOSASU00
    SLIC TOSASU TOSASU
    SSDT PmRef Cpu0Ist
    SSDT PmRef Cpu0Ist

    BIOS valid for OA 2.0: no, incompatible OEMID or OEMTableID
    Windows marker version: N/A
    OEMID and OEMTableID consistent: no
    the simple solution is to change your product key to the one on your COA sticker.
    Click Start, type slui 3, press on enter.

    Additional information:

    Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

    OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

    COA SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

  • Tanel Poder ' snapper does watch not what shows the V$ SESSION

    Hi people,

    I have a query that has been running for 3 hours.

    I decided to launch the snapper ASH mode tool to see what event the session is waiting for:

    SQL>@snapper ash 20 1 184
Sampling SID 184 with interval 20 seconds, taking 1 snapshots...


-- Session Snapper v3.64 by Tanel Poder ( http://blog.tanelpoder.com )




---------------------------------------------------------------------------------------------
Active% | SQL_ID          | SQL_CHILD | EVENT                               | WAIT_CLASS
---------------------------------------------------------------------------------------------
   100% | 2ywsu2t98dbw0   | 0         | ON CPU                              | ON CPU


--  End of ASH snap 1, end=2014-02-20 15:07:41, seconds=20, samples_taken=96

    With V$ SESSION, you must pay attention to the STATE.

  • OEM Windows XP Professional installation, bought on Ebay shows not authentic

    Hi, I recently bought a so-called installation OEM Windows XP Professional genuine United Nations Open unused on Ebay to $107.50. But when it was installed it always tells me it's not a real, so what I do now and it will cost me more money?


    * original title - what to do, how much will it cost, why should I pay more than I have? *

    Contact Paypal or your credit card company to stop payment.

    Contact Ebay about the seller.

    Because the key is not genuine you must purchase a new key from a seller is legitimate.

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • MAB authentication fails on the port of multi-domain: dead result of authentication "server."

    Hi all

    First of all, I have no experience with the configuration of Cisco switches (about half a year now) but I read loads and loads of documentation.

    I am trying to configure several areas (MDA) authentication on our Cisco switches using mab and spin into something strange. Currently, single mab is asked by my employer.

    Switch = 48-3560G IOS version 12.2 (55) SE1

    RADIUS = Freeradius (version 2.1.10)

    http://www.Cisco.com/en/us/docs/switches/LAN/catalyst3560/software/release/12.2_55_se/configuration/guide/swiosfs.html is my bible

    On port Gi0/29 a Cisco 7961 IP phone is connected and plugged into the phone that a laptop is connected

    The switch configuration:

    AAA new-model
    !
    Group AAA dot1x default authentication RADIUS
    Group AAA authorization network default RADIUS
    AAA accounting delay start
    start-stop radius group AAA accounting dot1x default
    start-stop radius group AAA accounting network default
    !

    interface GigabitEthernet0/29
    235 a description
    switchport access vlan 4
    switchport mode access
    switchport voice vlan 2
    load-interval 30
    bandwidth share SRR-queue 10 10 60 20
    queue-series 2
    priority queue
    action retry authentication event 0 failure allow vlan 7
    action of death event authentication server allow vlan 4
    living action of the server reset the authentication event
    multi-domain of host-mode authentication
    Auto control of the port of authentication
    restrict the authentication violation
    MAB
    Auto qos voip cisco-phone
    spanning tree portfast
    service-policy input AutoQoS-Police-CiscoPhone
    !

    dead-criteria 5 tent 5 times RADIUS server
    RADIUS-server host 10.1.1.24 auth-port 1812 acct-port 1813
    RADIUS server key 7 xxx
    RADIUS vsa server send accounting
    RADIUS vsa server send authentication

    Radius response: (for the full reply see attached RADIUS - response.txt)

    Sending acceptance of access to the port id 98 to 10.1.1.207 1645
    Cisco-AVPair = "Tunnel-Type = VLAN.
    Cisco-AVPair = "Tunnel-Medium-Type = 802.
    Cisco-AVPair = "Tunnel-private-Group-ID = 7.
    Cisco-AVPair = "Tunnel-preference.

    That's why access accept with assignment data VLAN

    Debugging on the switch :

    001776: * Mar 1 09:27:35.606: mab-ev(Gi0/29): context MAB received create from AuthMgr
    001777: * Mar 1 09:27:35.606: mab-ev(Gi0/29): MAB authorizing MACAddress
    001778: * Mar 1 09:27:35.606: mab-ev(Gi0/29): client context created MAB 0x2200000F
    001779: * 09:27:35.606 Mar 1: mab: State has original mab_initialize enter
    001780: * Mar 1 09:27:35.606: mab-ev(Gi0/29): sent to create a new context of EAP of MAB to 0x2200000F (MACAddress) event
    001781: * Mar 1 10:27:35.606 THIS: % AUTHMGR-5-START: start "mab" for the customer (MACAddress) on the Interface Gi0/29 AuditSessionID 0A0101CF0000007F0207A4AC
    001782: * Mar 1 09:27:35.606: mab-sm(Gi0/29): the event received 'MAB_CONTINUE' on the 0x2200000F handle
    001783: * 09:27:35.606 Mar 1: mab: during the mab_initialize State, had 1 (mabContinue) event
    001784: * 09:27:35.606 Mar 1: @ mab: mab_initialize-> mab_authorizing
    001785: * Mar 1 09:27:35.606: mab-ev(Gi0/29): MAC-AUTH-BYPASS boot for 0x2200000F (MACAddress)
    001786: * Mar 1 09:27:35.614: mab-ev(Gi0/29): MAB received a Reject Access for 0x2200000F (MACAddress)
    001787: * Mar 1 10:27:35.622 THIS: % MAB-5-FAIL: failure of authentication for the client (MACAddress) on the Interface Gi0/29 AuditSessionID 0A0101CF0000007F0207A4AC
    001788: * Mar 1 09:27:35.622: mab-sm(Gi0/29): the event received 'MAB_RESULT' on the 0x2200000F handle
    001789: * 09:27:35.622 Mar 1: mab: during the mab_authorizing State, had 5 (mabResult) event
    001790: * 09:27:35.622 Mar 1: @ mab: mab_authorizing-> mab_terminate
    001791: * Mar 1 09:27:35.622: mab-ev(Gi0/29): removed the credentials of 0x2200000F (dot1x_mac_auth_MACAddress) profile
    001792: * Mar 1 09:27:35.622: mab-ev(Gi0/29): AuthMGR for MACAddress sending event (2)
    001793: * Mar 1 10:27:35.622 THIS: % AUTHMGR-7-RESULT: result "dead server" authentication "mab" for the customer (MACAddress) on the Interface Gi0/29 AuditSessionID 0A0101CF0000007F0207A4AC
    001794: * Mar 1 10:27:35.622 THIS: % AUTHMGR-5-VLANASSIGN: VLAN 4 assigned to Interface Gi0/29 AuditSessionID 0A0101CF0000007F0207A4AC
    001795: * Mar 1 10:27:36.512 THIS: % AUTHMGR-5-SUCCESS: authorization succeeded for client (MACAddress) on the Interface Gi0/29 AuditSessionID 0A0101CF0000007F0207A4AC

    So RADIUS returns an Access_Accept and the switch treats it as a rejection of access and little esteem RADIUS as dead.

    Help would be appreciated!

    Chris

    Hi Chris,

    In response to your last post, assignment of vlan dynamic could be achieved with the help of the IETF RADIUS attributes according to the link:
    http://Tools.Cisco.com/Squish/d1791

    or using the pair of cisco-av according to the link:
    http://Tools.Cisco.com/Squish/8Bd61

    As for free using the Radius and cisco-av pairs. Please can you activate debug on switch output and reproduce the problem with the attempt to authentiation of customer:
    Debug RADIUS
    Debug authentication of all the
    debug functionality of authentication all

    As a result the customer authentication event, also benefit from the following switch:
    display the interface authentication sessions

    I met problems with respect to the case of the pair of cisco-av. assignment of vlan for example work using the sensitive tiny "tunnel-private-group-id (# 81) = vlanid ' instead of ' tunnel-private-group-ID (# 81) = vlanid.

    When testing with the 'tunnel-private-group-ID(#81) = vlanid', I get an error:

    RADIUS/DECODE: parse cisco unknown vsa 'tunnel-private-group-ID' - FAIL

    So the 2nd link, with the changes:
    Cisco-avpair = "tunnel-type(#64) = VLAN (13).
    Cisco-avpair = "tunnel-medium-type(#65) = 802 media (6).
    Cisco-avpair = "tunnel-private-group-id(#81) = vlanid.

    If you still have a question, please include the output of debug/display above which will shed light on the problem.

    Thank you
    Alex

  • netsh interface, can show, but can't

    Dear all,

    I used the following script for the month, to enable or disable a network interface:

    @ ECHO OFF
    CLS

    SET CONNECTION = connection to the Local network
    SET TEMPFILE = c:\tempnetsh.txt
    SET ACTIVE = NEWSTATE

    REM echo % TEMPFILE %

    name of the interface, see the command netsh interface = "CONNECT %" > TEMPFILE %

    the REM netsh interface show interface name = 'CONNECTION % '.

    Current state of the echo:
    "Disabled" TEMPFILE % FINDSTR
    IF % ERRORLEVEL IS 0 (SET ACTIVE = NEWSTATE)

    "Valid" TEMPFILE % FINDSTR
    If %ERRORLEVEL% is 0)
    ECHO.
    CHOICE/c/m YN "sure you want to disable this connection."
    IF ERRORLEVEL 1 SET NEWSTATE = DISABLED
    IF ERRORLEVEL 2 SET NEWSTATE = ENABLED
    )
    The ECHO processing...
    netsh interface set interface "CONNECT %" % NEWSTATE %

    New connection ECHO status:
    name of the interface, see the command netsh interface = 'CONNECTION % '.

    DEL % TEMPFILE

    BREAK

    Basically, it gets the status of the defined interface, if it is disabled, it automatically allows and if it is enabled, it prompts before disabling.

    It worked fine for months, but continued on with that update Windows this morning, the script can get the status of the interface

    name of the interface, see the command netsh interface = 'CONNECTION % '.

    It works very well and that it is correctly written in the temporary file, but it cannot define in another State

    netsh interface set interface "CONNECT %" % NEWSTATE %

    The last line fails with the error message

    ' The system cannot find the file specified.'.

    I can't roll back updates of Windows, because it is run by my company (although I could, but they would be resettled in any case).

    I am administrator on my computer (Windows 7 Enterprise 64-bit, SP1).

    I can't disable the network interface of control, and Internet\Network connected without any problem.

    The latest updates have been

    KB3109094

    KB3110329

    KB3035132

    KB3035126

    KB3148198

    I tried to link these patches for this issue, nothing helps.

    Can someone tell me a trick to solve it?

    Regards and thanks in advance

    Hi Anthony,.

    Welcome to the Microsoft community. I might help you.

    To better understand the issue, I would like to know what is your computer connected to the domain?

    If the computer is connected to the domain, the question you posted would be better suited to the TechNet community. Please visit the following link for assistance.

    http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

    Hope this information is useful.

  • 802. 1 x authentication with Radius and win7 Mab

    Good afternoon!

    I have a question about 802.1 x I've set up a laboratory in which I have configured authentication mab with 802. 1 x, but I have a weird behavior of my network controller. On the switch (4948e), I see that the user is authenticated and authorized, and I can see my switch these outputs:

    21 April 15:13:30.263: % AUTHMGR-5-START: start "mab" for the customer (a01d.48ac.b7f
    (5) on the Interface item in gi1/11 AuditSessionID C0A8DF9C0000002E002F3DAC
    * Apr 21 15:13:30.267: % MAB-5-SUCCESS: authentication successful for the client (a01d
    . 48AC.B7F5) on the Interface item in gi1/11 AuditSessionID C0A8DF9C0000002E002F3DAC
    * April 21 15:13:30.267: % AUTHMGR-7-RESULT: authentication result 'success' of me
    ab' for the client (a01d.48ac.b7f5) on the Interface item in gi1/11 AuditSessionID C0A8DF9C00000
    02E002F3DAC
    * Apr 21 15:13:31.299: % AUTHMGR-5-SUCCESS: authorization succeeds in for the customer (a0
    1d.48AC.B7F5) on the Interface item in gi1/11 AuditSessionID C0A8DF9C0000002E002F3DAC

    If I type "see the authentication session", the corresponding output.

    Switch #show authentication sessions

    Interface MAC address method ID of Session of field status
    Item in gi1/11 a01d.48ac.b7f5 mab DATA Authz success C0A8DF9C0000002E002F3DAC

    The thing is that when I check my network controller, it said "authentication failure". That's what I've done so far:

    1. I restarted my pc, the same behavior.

    2. I disabled and enabled my network controller, the same behavior.

    3. I rebooted the switch and re-configured. Same behavior.

    4. I tried with another PC configuration. Same behavior.

    5. I changed the configuration of "user authentication" using dot1x EAP authenticator and it worked.

    This is the configuration I have on my switch:

    AAA new-model
    Group AAA dot1x default authentication RADIUS
    Group AAA authorization network default RADIUS
    start-stop radius group AAA accounting dot1x default
    AAA - the id of the joint session

    !

    control-dot1x system-auth

    !

    Switch #show run gigabitEthernet int 1/11
    Building configuration...

    Current configuration: 128 bytes
    !
    interface GigabitEthernet1/11

    Cx-to-Host description
    switchport access vlan 223
    switchport mode access
    Auto control of the port of authentication
    MAB
    end

    This is the first time I'll put up a configuration 802. 1 x. I'm doing something wrong?

    I really hope that I am not the only one with this kind of behavior!

    Thank you for any assistance you can give me!

    Status: Authz success

    This means that the port is open. Is this permanent? Keep looking at the output of the show a few minutes see if it tries to dot1x too. Can you ping from the PC?

    As authentication of 802. 1 X is enabled in the properties of the map NETWORK PC that you can expect dot1x method runs on the switch and eventually respond to the computer with auth fail. Authentication in the PC box is not necessary for MAB.

    What type of RADIUS server you use and there 802.1 policy X in addition to MAB policy?

    IP address: unknown

    This means that the switch did not recognize the IP address of the host, probably due to the lack of

    analysis of IP device

    command. But it is not necessary for the plain MAB or dot1x.

  • "authentication control-direction in" CLOSED authentication mode

    Switch: 4510R-E, running a DEV version 3.6.0-based

    ISE: 1.2.0.899 patch 7

    Hi, I worked on a weird issue where some of my clients would pass through their IP address and the only way I could get it back was to spend their open port in authentication mode. I need to run in closed mode, because I change VLAN via MAB.

    I worked with TAC, and they suggested that add the command "authentication control direction in" in my config switchport (below). Couple tests Ive done, this seems to help. But I understand why. Isn't the direction-control a little command reduce to naught the principle of closed mode operation? That is, it allows a communication until the device is allowed. Thank you.

    interface GigabitEthernet2/18
    switchport access vlan 34
    switchport mode access
    switchport voice vlan 66
    events-the link status logging
    authentication event fail following action method
    action of death server authentication of the event allowed vlan 34
    action of death event authentication server allow voice
    living action of the server reset the authentication event
    the host-mode multi-auth authentication
    authentication order mab dot1x
    authentication priority dot1x mab
    Auto control of the port of authentication
    restrict the authentication violation
    MAB
    dot1x EAP authenticator
    dot1x tx-time 10
    service-policy input QoS-entry-policy
    Service-politique-accueil-port-sortie-strategie output QoS
    end

    I also need to use this command to preserve the authenticated devices. He was going on with a video surveillance system, which was an embedded Linux operating system. It's the MAB and because there was no transmission all noisy traffic (unlike a windows box) then the switch would not be able to reauth it as it had no mac address to auth, so show up with an 'unknown' in the MAC field.

    It allows essentially traffic flow out of the port. This active unit to receive HTTP traffic and respond, then the switch could auth it again once the device sent a frame.

    When you do a Show authentication sessions you will notice a Oper control dir: the two will pass to Oper control dir: in

Maybe you are looking for

  • It not install Java!

    I downloaded the latest version of Java (8 v71) but it won't install. I open the file and enter the InstallWizard, however, when it opens, a loading turns wheel a little and then loading the next page (it seems to mention something about 3 million us

  • Atrix Lapdock overheating

    I recently bought an Atrix Lapdock (and love), and the area where the USB and load ports are seems to become VERY hot when I use the dock, even without anything plugged into ports. It can be so hot that it becomes uncomfortable to have on my lap. Thi

  • Focusing with 5 d Mark III problem

    I use my relatively new 5 d Mark III with my old lens 400mm 5.6 for bird photography.  Often, he will not grab the focus.  I have to more closely before manual focus it focuses.  It doesn't seem to matter which distance setting I use on the lens. So

  • 1 HARD rotto su ST31000640SS MD1000 disk

    Buongiorno Ho need di UN preventivo per 1 HDD rotto by una DAS MD1000. ST31000640SS 1000Gbytes HARD drive In attesa saluto per I have imie saluti. Maurizio.

  • Large icons at startup

    For a while now when I start my computer it loads with my large icons if I restart most of the time it restarts normal, but last week now taking many restarts so he can return to normal today, I tried of restarts now more then 6 times always when loa