netsh interface, can show, but can't

Similar Questions

• FEX interface can be configured as L3?

  Hi FEX interface can be configured as L3? The uplink is connected to Nexus7710. Thank you

  Beginning with version 5.2 Cisco (1), you can configure a fabric port Extender (FEX) as an interface layer 3 for host connectivity, but not for routing. See the configuration of the Cisco Nexus 2000 series fabric Extender for more information on the tissue expanders.

  Reference http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/in...

  Kindly rate post useful.

• PES 10 user interface can be changed to a lighter gray?

  Hello world

  Is there a way in the user interface in PSE10 can be replaced by a lighter gray or another color?  I'm looking in preferences in PSE10 but I have not found a way to change the color of the user interface?

  TIA,

  ClearInk8

  Hello

  PES 10 user interface can not be changed.

  Thank you

  Bartholomew

• How to export a PDF file to make nonprinting objects show but don't print not AND hyperlinks on the top of the page work at the same time?

  Firstly - I work in InDesign CC 2015.

  My problem is, I had this 10 page document, which, on every page, shows an object that must be in PDF format - but do not print. I made this object into a button and unchecked "Printable". On top of this object, I made 10 hyperlinks (separate layer) that point to the page 1-10.

  When you export the document and I use the interactive PDF format , works ' show nonprinting object but do not print ' well, BUT hyperlinks don't. If I uncheck the "layer of nonprinting objects" in the file PDF, then hyperlinks work, but the problem now is that the nonprinting objects are invisible...

  When you export the document and I use a PDF to print the "unprintable object show but do not print" does not work BUT the hyperlinks don't...

  I put hyperlinks to post a link to pages and also tried the link to the anchor text. No difference.

  So my question is: How to export a PDF file to make nonprinting objects show but don't print not AND hyperlinks on the top of the page work at the same time?

  Thank you

  Mette from Denmark

  I swapped my links to the buttons - AND NOW IT WORKS; (o)

• How to make a slideshow to be used on blu - ray. I MADE A SLIDE SHOW BUT I CAN NOT PLAY ON BLU

  HOW TO MAKE A SLIDESHOW TO BE USED ON BLU - RAY, I MADE A SLIDESHOW IN LIGHTROOM, BUT I CAN ' FIND A WAY FOR BLU - RAY. JIMBUZZ1

  Lightroom creates a DVD that can be played on other computers.  This includes slideshows.  If you want to be able to show your DVD into a Blu - ray or standard DVD player connected to the TV, then you must use a software that will create the DVD in the proper format.  You might consider ProShow Gold, or Adobe Premiere Elements or similar programs.  According to its capabilities and your TV, you might be able to simply display a regular data DVD images.  My TV has an entry for a flash drive.  I can load the images to a flash drive and view them directly.  But if you want to show your slideshow on your TV, you need to author with appropriate software.

• I can't get a banner to show, but the banner tabs still work

  My home page has a banner on the top, which includes tabs for support, webmail, contact us, etc. The banner area is empty, but because I know where are the tabs in the banner I can always use them. I had the same problem on my old XP laptop. I also have it from time to time on my Vista PC.

  Other symptoms of this problem are, Yahoo mail does not load, and I can't enter comments on Facebook (I can enter the comment, but it post when I hit will not.) I used to be able to exit Mozilla and restart the computer and it would be some time on the other laptop and PC, but now I can't stop it from happening every time on this one. I FF4, just d/l, I have authorized the pop ups, all to nothing does not.

  I have Norton 360 on all computers, as well as System Mechanic, but it happened when I used Kaspersky and another registry cleaner on the XP laptop only.

  I think it's on:

  Tools > Options > Advanced tab general 'mini '.

  "Warn me when websites try to redirect...". »

• HP ENVY 15 Notebook PC: Envy 15 empty show - but the windows facing up and running - and can be accessed via Team Viewer

  Hello

  I used the laptop for almost two years, and today I came across the following problem (yesterday everithing worked fine):

  I opened the laptop and the power light is on, the finger scanning led was light but no display on the screen.

  I use team Viewer and I can access the computer laptop, scanned the finger and loads of windows 8.1 correctly, but still nothing appears on the screen of the laptop.

  Using Team Viewer: right click on desktop-> screen resolution and there are:

  Display: 1 Digital Flat Panel (1024 x 768 60 Hz)

  Resolution: 1024 x 768 (recommended)<- is="" grayed="">

  The screen should generally at a larger display: 1920 x 1080.

  So far, I have tried the following: Hard reset, serveral reboots, but no idea what to do next.

  Any help/suggestions would be appreciated.

  Have you connected an HDMI cable to the displayport to see if an external monitor works?

  You should have seen a normal window with Teamviewer. As I understand it, the window of Teamviewer for laptop is grayed out.

  This means that the solution of video display in your laptop has very probably.

  The previous suggestion, I did check.

• How can I get my iTunes song to play on a slideshow? I have added to the slide show, but he never play any music.

  I'm trying to get 4 of my iTunes on my iPhoto slideshow song. I downloaded the music and he added to the slide show. But whenever I saw or slideshow play music refuses to play. Help lol

  What version of the operating system and iPhoto?

  LN

• Is this possible? -&gt; A shortcut to toggle the "Show Transformation values" option in preferences-&gt; Interface (can be with Keyboard Maestro or Automator)

  I really need a shortcut for it power:

  

  Although nothing no power shortened, consider that the numbers are always available in the Info Panel. Nothing to click.

  If necessary, drag the closer Info Panel

  

• Using the same interface CAN read and write

  Hello.

  Can I use the same CAN interface to read and write?

  For example:

  I send you CAN frame using CAN1 to my MCU.

  IF MCU confirmed the order of receiver it immediately sends the echo return command and there different ID to send the command.

  I tried to use CAN1 output framework and then reconfigures CAN1 to frame in queue and retrieve the frame of the echo.

  But it seems that I was always missing. The 'framework of CAN' kept vi expire.

  When I used the separator on the outlet BOX in my configured MCU CAN1 for frame and CAN2 for chassis in and I managed to catch the echo framework.

  I think about 100 ms for the frame in response that will be sent after the order has been received. It takes longer for the NI PXI-8513 reconfigure? Can I still do it, or I have to use the separator?

  I wad jump to use an interface to read and write.

  Thank you

  Ok. I misread your notion of echo. I understand now. I'm sorry.  The code you posted seems reasonable.

  (1) did you notice on or off for the session?

  (2) what baud rate? You can add a parameter of baud rates for the property to be explicit node.

  (3) I don't remember the name of VI, but you can add a status of Comm Get after reading. This will give you some information about the bus - if errors were detected, etc. Which can be useful to help debug.

• Windows 7 Pack LIP (Language Interface) can be installed on Windows 7 Starter Edition?

  Linguistic LIP Windows 7 for Hindi said "can be installed on all editions of Windows 7' http://bit.ly/2EFPcg - even on the Starter Edition?

  Yes, it will work on Windows 7 Starter:

  As was the case in Vista, Windows 7 will continue allowing a wide range of people around the world use Windows 7 in their own language by using the LIP language Packs. The lips are based on MUI technology and provide a localization of the user interface most commonly used by Windows users. The lips do not require a license and can be downloaded for free to be installed on any edition of Windows 7: Starter, Home Basic, Home Premium, professional, enterprise or ultimate.

  Because the entire user interface is not translated, lips require at least one parent language to be present on the machine to be installed. After that the LIP is installed and selected as the UI language, the parts of the UI that are not translated into the LIP language are displayed in the parent language. Some LIP languages allow more than one language as parent language. For example, the Catalan LIP can be installed if the Spanish language pack or the French language pack is already installed on the system. The parent language requirements are specified on the download page of each LIP.

  For more information, see available language packs Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• Adobe Camera Raw Interface - can anyone help?

  I have Photoshop Elements 9 installed on my PC running XP. I have a version 6.5 of Camera Raw.

  My camera is a Nikon D60 which records its Raw images as. NAVE. When I open a Raw file in PSE9 Camera Raw Interface

  does NOT open. When I click to open a Raw file there is usually a delay before appears a small rectangular box Apple Adobe

  Photoshop Elements with text indicating reading camera Raw Format, there is a row of green boxes to show progress. When

  complete the image appears in the Panel and also in the small panel below. When I point the cursor on the image in the

  lower panel the name of the file is indicated as Whatever.NEF but no control adjustment is indicated.

  Assistance would be appreciated, thanks.

  I think it will work eventually, but maybe there need a reboot or something to get ACR to forget the 800 x 600.

• Premiere Pro CC: blue text interface can be changed to yellow?

  I was wondering if there is an option in the preferences to change the color of the text in the interface. It used to be yellow and now it is harder to see.

  I notice the text in blue on the range of programs update: AE, PP, Photoshop, etc.

  So is there a setting in the cloud itself that would allow me to change the color back to yellow?

  If this is not the case, no big deal, I'll have to get used to. Love the new interface anyway. Much more sensitive without any problem.

  Thank you, Adobe!

  No, there is no way to control the color of the highlight of development and the text of some controls. As you note, part of the major changes to the UI through many programs.

• The sound of some mp3 saturated in WMP11 when read by interface usb audio, but they play fine in iTunes

  Help, going crazy here!

  With MP3 encoded at 320 kbps with 48 kHz sampling frequency, I get a terrible distortion when play on WMP11 on my MAudio Mobile Pre USB audio interface. When the MP3 is playing in WMP11 by the internal sound card and built-in Laptop speakers, that the sound is not distorted, except that he is from small tinny speakers. If you think that the Pre Mobile is the culprit, but...

  I have the latest driver for MAudio and Mobile meadow has been installed correctly, I can play MP3s that are 320 kbps with sampling frequency of 44.1 KHz without problems through the external audio interface.

  In addition, iTunes plays the same 320 kbps, 48 KHz MP3, out through the pre Mobile and they play very well, no distortion at all (?)

  I've uninstalled and reinstalled WMP11 without success, downloaded codecs updated, tried to disable the throttling of the CPU and various other things with no results.

  I look forward to use iTunes, because it is so slow, I'd like WMP11 to work with these 48 kHz mp3s and I have a bunch of them, so I really want to convert them to 44.1 Khz. Not only that, the deformation occurs also with a lot of video files (AVI), where I think the sound is coded in 48 kHz.

  Anyone have any ideas?

  Thanks Dennyinredding, that seemed to work and it is not SLOW as iTunes, thanks for the suggestion!

• I'm watching a show, but I keep getting interruptions while it is buffering

  I'm watching a show on my computer but it keeps cutting and buffering, then he runs again. Can you tell me if I can change something in the settings that will allow me to attend a show without it cutting all the time

  Hi Charpaul,

  The buffering is caused by your internet connection. Even if you have a relatively high speed of internet connection, your ISP reduced as people more open a session. The more bandwidth use you the slower things can get. If you get to watch both occupied day or night then your PC will be buffering of the data on a regular basis. It is one of the reasons why I don't watch TV on internet, at the moment where you buffering caught up with, unfortunately, lost the plot of what you were watching. A way around the problem is to try to look at where the internet is not so busy - in my case around 02:00. John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com