IPad 3 show two-sided

Similar Questions

• Print two-sided Photosmart 7510

  I'm running Mac OSX 10.9.3 and a pilot recently re-installed for my Photosmart 7510 (long story on renewed OSX installation). Any application that I use, I am unable to get the 7510 to start to print at the long edge binding. It ONLY prints in short-edge binding. I have re-installed the driver 2 X and downloaded 2 X so it should be no problem in this regard. Someone has an idea?

  Hi dominik_12,

  Welcome to the Forums of HP Support! I understand that you are not able to select Long Edge binding when you try to print to your HP Photosmart 7510. You have tried to uninstall and reinstall the driver unsuccessfully on the BONES of the Mavericks. I want to make sure we select the HP driver and not the AirPrint driver who would give only limited options.

  Complete the following steps:

  Reset the printing system

  1. click on the Apple icon and then click on System Preferences.

  2. in the hardware section, click Print & Telec. Dialog print & fax opens.

  3. make a right click (or Ctrl + click) in the left panel, and then click Reset printing system...

  4. click OK to confirm the reset.

  5 type the name and the correct password.

  6. click OK to reset the printing system. The dialog box Print & Fax shows no printer selected.

  Add the PS 7510:

  1. click on the sign plus (+) sign and locate the PS 7510, highlight the printer

  2 in the section using printing, make sure that you select the driver HP PS 7510 and not one AirPrint.

  See the image below (you want to click the HP not the AirPrint driver):

  

  Now that we have the PS 7510 driver selected, please open the program or document you are interested in printing and follow the steps here:

  1. click on the command Apple + P , your print dialogue box opens, click on the option view details at the bottom left (it may already be open)

  2 just below the Orientation section, click on the arrows to access the drop-down list, and then select page layout

  3. now you should see the two-sided printing of the menu drop down, here you can select Long Edge binding.

  4. click on print

  Now able to print successfully long edge bind you? Please let me know if this was helpful, I'll watch for your reply.

  Thank you

• HP Photosmart 2610 all-in-One, Manual Two - Sided Printing, HP support email Ticket number: 8028153835

  E-mail HP supports, ticket no: 8028153835

  I bought my printer all-in-one HP Photosmart 2610 in 2005. It has already been installed on a HP laptop, Windows XP computer, and worked all the features.

  He is now on a PC running Windows Vista Ultimate 32. When I tried to install the CD, it wouldn't load because of the Vista OS. Then, I loaded the printer driver HP Photosmart 2600 series full of features (Vista compatible OS) to the following HP Web site link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-47754-1&LC=en&DLC=en&cc=us&...

  Now I can't get the print preferences to print (double-sided) of manually printing two-sided. This option is available on the original printing software.

  I tried the solutions: HP Image Zone help / duplex prints that show: click the finished tab / in the Document options box / select print on both sides checkbox (this check box is not available).

  When I run the printer of the Panel as an administrator, the printer properties / device watch manual duplex settings: enabled.  When I go to the printer properties / Advanced / impression of the default values, or the finish / Print On Both Sides checkbox is available nor printing Shortcuts tab will allow the option Print On Both Sides to appear (shows that Print On Both Sides: Off).

  E-mail support HP told me to install this patch to correct the problem:

  http://h10025.www1.HP.com/ewfrf/wc/genericSoftwareDownloadIndex?softwareitem=MP-69848-1&cc=us&LC=en&...

  When I try to install the patch, it will not load because he wants the original CD software. So I'm back to my original problem trying to load the original printing software does not load because the CD is for Windows XP operating system. I'm in the stalemate between the software CD I have, and what is available on the HP site.

  What is your solution?

  I chatted with a HP technician online today.  I had the same problem with Vista, not to recognize the Manual 2 sides print.  His solution was to add a new printer, the HP Deskjet 6500.  This works!

  Go to control panel, hardware and sound, add a printer, add a local printer, select port to use, select HP Deskjet 6500, following, then select if you want whether it is your default printer and then click Next.

  Two back will be available when you select the Deskjet 6500 as your printer, even if you actually use your HP 2610.

• Automatic two-sided printing

  Software for the D5360 does not support two-sided automatic printing in Windows 7. It must turn the page manually. Is there a work around for this?

  Hi Malcolm,.

  I had this printer before, then maybe we might be able to understand this.

  A couple of things to check:

  1. Automatic printing equipment 2 faces is firmly attached to the back of the printer:
     1. If you look at the back of the printer, you should see an attachment to the rectangular research that fits on the back of the printer... This is what really turns the paper upside: check that it is firmly fixed on the back of the camera.
  2. Open the printer properties dialog to verify that "Auto" is not an option in the "duplex printing" drop-down menu.
     1. Probably the easiest to go to 'START' / 'Devices and printers' and right click on the printer icon, then select "Print Options".
  3. Click on the tab "features."
  4. On the right side, the 'paper Saving Options' shows ' double-sided printing: ": click on the dropdown under that to see what options are available to you... you should see"Off","Manual"and"Automatic"."
     1. If automatic is there, select it and then try to print a double-sided document.
  5. If you do not see "Automatic", close this dialog box for now.
  6. To return to the dialog box "Devices and printers", right-click on your printer icon again and this time select "printer properties".
  7. Select the tab "device settings".
  8. At the bottom of the dialog box, you should see "installation Options".
     1. "A two-sided (for printing on 2 sides) unit:" is to be considered... with two options: "Installed" or "not installed."
     2. Make sure that "Installed" is selected.
  9. Click on apply, then OK.
  10. Then, return the properties of the printer as before and make sure that the option "Automatic" is available and active... and then try to print a document both sides.

  Oh... and by the way... you happen to see error messages, etc.? Or is printing automatic duplex not an option your seenig?

  Kind regards

  -Paper

• iTunes playlists show two different formats. Why is it so.

  iTunes playlists show two different formats. Why is it so.

  A playlist displays a blue screen with numbered songs and music before notation box provided for each song. The other playlist is predominently white numbered from each song and check the box. Why is it so and how both can be given.

  Use the view > view as menu from one of six different layouts. Ones you mention is Playlist and songs respectively.

  TT2

• How to enable two-sided printing on MacBook Pro with Canon MX490 printer

  Hello

  I have the MacBook Pro (retina, 13-inch, early 2013) and OS X version 10.11.4 (15E65) and Printer series Canon MX490.

  When I try to make a double-sided, the printer settings printing does not allow me activate two-sided printing.

  

  Also when I go into the settings of the printer, there is no option for me to select this option to enable printing double-sided or duplex printing etc..

  

  When I try to print with TextEdit settings, I still get the same printer settings and it does not allow me to enable two-sided printing.

  I couldn't find answers online, and frankly it's frustrating. I would appreciate if anyone can help with the problem.

  Thank you very much!

  This is the screenshot of the settings under the printer to textedit. Sorry I don't tie with the original message earlier.

  

• HP m225dw pro: two-sided copy of hp m225dw and scan

  Hello guys,.

  I just bought a HP Pro m225dw and I decided on this printer because I found in the description, it supports automatic two-sided printing/copying/scanning.

  Yesterday I got so excited at first, but then I was disappointed, because I was not able to scan/copy automatically on both sides.

  I followed the exact steps of the Manual:

  Copy on both sides automatically 1. Loading original documents into the tray with the first page up and leading the top of the page. 2 adjust the paper guides to fit the size of the document. 3. open the settings menu to copy: ● LCD control panel: on the product control panel, press the copy settings. Control panel touch ●: from the home screen on the product control panel, tap the copy button and then press the button.4 of settings. Select duplex. 5. use the arrows to scroll through the options and then select the appropriate option. 6. start the copy job: ● LCD control panel: press the Start button. ● touch control panel: Tap Start copy

  But on my touch screen I have only two choices - 1 to 1 or 1-sided to 2 sides.  I don't have a duplex option, as he claims.

  Help, please. I'm doing something wrong? Help, please!

  Hello prichindelu,

  Sorry for any inconvinience, these highlights are bad and the printer does not offer this feature.

  I sent a request to the attention of a team within HP. They are likely to ask for information on your part so please look for a private message from a contact HP identified.

  If you are unfamiliar with the operation of the function of the Forum, private messages you can discover this here

  Kind regards

  Shlomi

• I show two updates of security with a date of 1969 is that right

  I show two updates of security with a date of 1969 are those just my Fox fire beginning very slow very very slow

  This has happened

  Each time Firefox opened

  Is a month ago

  Firefox must have had a problem getting the time to update your system clock, and so the timing of this update is zero. Time (beginning of time) for Unix is 01/01/1970 midnight GMT, less your GMT offset - what makes 12/31/1969 and 2 to 6 pm on North America.

• Photosmart C6280 all-in-One: C6280 automatic two-sided

  Since Windows 10 has been installed, whenever I try to print I get a box saying Automatic Two - Sided Printing Module missing, by the following text:

  The document has been configured to print by using the Automatic Two-Sided Printing Module, but module is not installed in the device.

  The document will be printed recto.

  I installed the latest HP drivers and Windows 10 updates are up-to-date.  I had no problem when using Windows 7 before upgrading Windows 10.

  Thanks for your help.  HP print and Scan Doctor made a test print OK, but not the other, he advised me to uninstall and reinstall the software.  I uninstalled and then reused HP print and Scan doctor - he told me I didn't have the latest version of the software and allowed me to download and install it, I did (after a lot of problems with my connection broadband 295 MB download).  Run HP print and Scan Doctor - everything is OK.  I tried to print (from MS Word) and personalization, no message about duplex.  Hooray!

• Device Manager shows two different processors on Satellite P200 - 1 K 9

  Hello
  I just bought P200 - 1 K 9 and spotted (Vista 32-bit) Device Manager shows two different processors under the section of processors:

  Intel Core 2 Duo CPU T7300 @ 2.00GHz
  Intel Core 2 Duo T7700 @ 2.40 GHz CPU

  I expected to see the two excatly the same processors here.

  Vista recognizes in general CPU core 2 duo 2.4 GHz, BIOS too.
  What is on the Device Manager?

  Is there something wrong with the CPU? Should I return it better?
  Would you please check your processor in Device Manager (start-> right click on computer-> select Properties-> Device Manager) and let me know what you have?

  I'll start some live linux CD and check there too.

  Thank you
  Miroslaw

  Hi mate,

  the you´ve got problem is not a problem. It s just a simple bug in the Vista Device Manager and hardware abstraction layer.
  Follow these steps:
  Remove the CPU from the Device Manager (uninstall just like any other device) and then restart windows. The processor will be indicated correctly next time you reboot the system.

  Welcome them

• HP Color LaserJet M553: M553 - cannot print two-sided

  Hello

  We have a new HP Color Laserjet M553 (B5L24A) which is not allowing us to automatic duplex.  He is currently runinng via a Windows 2008 R2 server and is network connected via IP static on the Ethernet cable.

  I tried several steps of troubleshooting so far:

  -Several including UPD PS 6.0 5.8 PS, PS 5.5, PCL5 printer driver

  -Several print on print server objects

  -Confirmed the 'device settings tab' has the duplexer enabled on the local print server and print objects

  -Updated firmware for the last datecode 20150731

  -Tested printing from several applications, word, outlook, pdf, internet Explorer, textfile, etc...

  -The same problem happening to all connected users

  The printer accepts orders for manual, automatic duplex printing simply cannot.  No error messages didn't report on Panel print, printer, client or server.  Trying to get your hands on a 2nd M553 so that I can confirm a double problem or not.

  Feels like a problem with the firmware where he does not understand the command duplexing automatic normal or did not recognize the duplexer is installed.

  Any ideas?

  Your model is not the two-sided model.  The duplex model is B5L25A and will say about this M553dn not M553n who is your model.

• Example: HP PHOTOSMART 7529e: how to make two-sided printing automatically with printer HP 7520

  All I'm doing is to make my printer two sided front or double.  No matter what I check IT DOES NOT WORK.  I checked "2 sides, 1-2, NOTHING.  What amazes me is that it worked until recently and now he just does not have double-sided printing.  I'm probably doing something wrong, but WHAT?

  filgrastin

  In General, duplex printing is consulted / adjusted printing preferences.

  If you print from an application, for example, in Word or in your browser, you reach the printing of the preview preferences before printing.

  Reference:

  Manage the print with preview output before printing

  Excerpt:

  • Print - print options access preview

  The browser page > file > print > properties

  Access Printing Preferencesproperties:

  Paper Source (tray selection), paper size, media, Orientation, print on both sides, page order

  Reference: Printing Preferences

  ================================================

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Need help with the issue of two-sided printing

  We have a printer D1350.  It is directly connected to a PC and shared with other computers on our network.  In the past I printed two-sided with binding on the long edge with no problems at any one of the computers.  Recently he began to ignore my settings and print double-sided copies with link short edge no matter how I said to print from a PC.  All other PCs are able to print correctly.

  All PC's had Windows 7 OS when the problem started.

  We have upgraded to Windows 10 and the printer does not at all, we uninstalled the printer drivers and then re-installed both and it will not print correctly from a PC.

  I checked for updated drivers, still will not print properly with a PC.

  What arrangement could have changed on this PC it's ruin?

  Help!

  This is not a Canon support site. Its a forum of the users in charge.

  Give Canon a call at 1-800-OK-CANON.

• HP 7520 Double face (two-sided) scanning possible? If so, how can I make this work?

  How can I scan a document double sided (A4) with the HP Photosmart 7520?

  I prefer to scan directly to e-mail, but I never see the option of detection across a document. With scan-to-mail, but also with the other options (scan of the computer, USB)

  Several reviews that I've read what follows:

  "The Photosmart can print and scan in duplex (two-sided page), but scanning duplex requires two passes.

  But how does it work? I guess that doesn't mean that I have to do two separate analyses (which would not of course double-sided).

  But at no time, I gives me the possibility to transform the document and resume analysis.

  Any ideas on how to use duplex (sort of) scanning with HP 7520?

  The Photosmart 7520 offers the possibility to scan double-sided.

  You scan the front of the printer or the software on the computer? Duplex scanning must be started from the software.

  Scanning both sides of the software on the PC:
  * Open the HP printer Assistant software for the Photosmart 7520
  * Select scan a Document or Photo
  * Select the Document in PDF format (or by e-mail in PDF format)
  * On the side right of the screen is a list of drop-down menus and one of them is the source of the scan
  * Select this option to scan from the automatic document feeder
  * After you select this option, a checkbox will appear under this option to activate Dulpex scanning
  * Set the other options as desired and start the scan

  If you are scanning multiple pages which should be duplex scanning, then the printer will travel the most complete list on one side and then to instruct you on how to reset the pages to scan the remaining sides. The unit requires a method of style "flip and resume" duplex scanning. I hope this helps.

• now my restoration of the work system - properties - show two drives C: and D: WHY? I want to only show him C: _

  Hi I noticed recently that now my restoration of the work system - properties - show two drives C: and D: WHY?  I want to only show C:

  He has never done this before and I don't want to show him D: at all, I have a HP and the D: drive is my restore disc, with D: listed means that he could get crushed and I don't want to appear in the recovery menu.

  How can I delete the D: drive on the recovery menu but the C: DRIVE ON leave...

  Thank you

  Hi I noticed recently that now my restoration of the work system - properties - show two drives C: and D: WHY?  I want to only show C:

  He has never done this before and I don't want to show him D: at all, I have a HP and the D: drive is my restore disc, with D: listed means that he could get crushed and I don't want to appear in the recovery menu.

  How can I delete the D: drive on the recovery menu but the C: DRIVE ON leave...

  Thank you

  With all due respect, you are incorrect. You simply did not notice before D drive. D drive is a logical drive. To the best of my knowledge there is no way to prevent it from the show. However, simply disable the system for D drive restore.
  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/