Device Manager shows two different processors on Satellite P200 - 1 K 9

Similar Questions

• the Device Manager shows two processors

  My laptop Pavilion dv9543cl Device Manager indicates that there are two, rather than Intel Core 2 Duo CPU 7300 @ 2.00 GHz processors. It is clearly in original condition (i.e., HP Windows Vista, 32-bit with chips of memory 2 x 1 GB.) How should I treat this problem?

  Hello

  wilwon32 wrote:

  My laptop Pavilion dv9543cl Device Manager indicates that there are two, rather than Intel Core 2 Duo CPU 7300 @ 2.00 GHz processors. It is clearly in original condition (i.e., HP Windows Vista, 32-bit with chips of memory 2 x 1 GB.) How should I treat this problem?

  This is quite normal.

  The following image shows the PC that I use as a PC ACPI x 86 two processors. The two processors (Cores) are on a single chip which is the Intel Core 2 duo processor.

  

  Best regards
  ERICO

• Satellite P300D-150 - Device Manager shows two graphics cards

  Have a P300D-150 shows of two graphics cards in Device Manager: Radeon 3200 and standard VGA
  While I installed the ati display drivers

  Why is this and how can I solve this problem?

  Thanks in advance

  Hey Buddy

  This isn't a question or a problem. It s a fact!
  My U400 has two inputs for Mobile Intel 965 graphics cards.

  I put t know the reason for this, but there s nothing wrong with the laptop ;)

  See you soon

• Two different processors in Vista on the Satellite M-series(1M8) Device Manager

  I have two different processors in the vista Device Manager:
  first pilot intel core 2 Duo T7100 and second Core 2 Duo T7700

  What this means and how do I use it?

  Thanks Klaaus

  Hello

  This is a bug of Vista ;)
  Just remove the processors the Device Manager and reboot the laptop.
  After the restart new Vista should recognize and refresh the information in the CPU.

  Best regards

• Satellite A100-1AI watch CD player but Device Manager shows the DVD player

  I own a Satellite A100-1AI and went from Vista to Windows XP?

  My DVD player has been discovered as a HL-DT-ST DVDRAM GSA-T20N but is only showing as a CD drive in my computer screen.

  Also Device Manager shows Mass Storage Controller and controller SM Bus as an unknown device (other).

  Since the switch from Vista to XP I have not adjusted my BIOS settings

  How can I make my DVD see CD and erase those unknown devices

  Thanks in advance

  Spon

  Just a question;
  You can read and burn CDs?

  Regarding the unknown devices:
  These devices are only compatible Vista and so there is no drivers for the mass storage controller.

  Check this box:
  http://APS2.toshiba-tro.de/KB0/TSB83023N0000R01.htm

  + After the installation of Windows XP, there might be a yellow exclamation by a "PCI memory controller" or * mass storage controller * in Device Manager. +

  _Solution: _
  + This unit is probably the module of Robson former Turbo Memory. +
  + This hardware will only supported by Windows Vista. +
  + That is why there is no Windows XP drivers. +

  Greetigns

• The Windows Task Manager shows two instances of HpqPhUnl.exe running under XP

  My windows Task Manager shows two instances of HpqPhUnl.exe Runnung.

  * original title - why do I have two HpqPhUnl.exe race? *

  Are you using the quick change of user with more than one user connected and are both instances of HpqPhUnl.exe running under different user names?

  Although it is always possible for malware to masquerade as a legitimate file, HpqPhUnl.exe is related to the HP Photosmart Essential software provided with printers HP all-in-one.

  It seems there were several problems with Photosmart Essential and HP has replaced with HP Photo Creations.  HP claims, however, that he "supports" always Photosmart Essential.  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02475046&lc=en&dlc=en&cc=us&product=3857372

  If you have any problems and you're just curious, I suggest you leave the pretty well after scanning with the following just in case two free tools:

  MalwareBytes Anti-Malware
  SUPERAntiSpyware

  If you experience problems with your HP software - and the scans do not present any malware - I suggest to ask in the forums HP (there are 3: consumer, Business and IT resources.)

• iTunes playlists show two different formats. Why is it so.

  iTunes playlists show two different formats. Why is it so.

  A playlist displays a blue screen with numbered songs and music before notation box provided for each song. The other playlist is predominently white numbered from each song and check the box. Why is it so and how both can be given.

  Use the view > view as menu from one of six different layouts. Ones you mention is Playlist and songs respectively.

  TT2

• Device Manager shows no device, is empty

  My 8200 Dell under XP Professional SP3 shows not all devices in Device Manager.  I think that it started very recently when I was installing TM Internet Security after the removal of Norton Anti Virus 2009.  Eventually after using Norton Removal Tool. It doesn't show the devices safe.  Plug and Play is on.  I recently installed an old HP DeskJet 820Cse printer using existing drivers.  I do not think that article 953979 applies since it just (seem), took place but it seems to fit the description.  Any help is appreciated.

  There is a Microsoft 953979 patch that works, but it didn't on mine, I then found this articale and followed the instructions and it worked.

  (1) logged as an administrator;
  (2) Regedit > HKLM\SYSTEM\CURRENTCONTROLSET\ENUM.
  (3) right clicked Enum and gives right to the system and administrators full control.
  (4) clicked the button Options at the bottom of the window.
  (5) on the Advanced window checked 'reset permissions on all child objects... ". »
  (6) the deleted Enum key. Error message: error while deleting key. I had to remove this key twice because initially, it appeared the remains of Enum key. After that, the locked ENUM\ROOT\LEGACY_SSDPSRV who already had a lot of weird symbols example $% &' () * +-, etc., now gone. Registry shows an own ENUM\ROOT subkey.
  (7) PC rebooted and back connected to Windows;
  (8) window of the Device Manager showed some yellow exclamation not to mention that some devices not recognized, then refreshed a few times showing successively less then not many of these features.
  (9) PC rebooted again;
  (10) message screen saying according to Windows has finished installing new devices, and the computer must be restarted before the new settings take effect.
  11) Yes to restart the computer

  Now the Device Manager window is full and all devices running again!

  This solution works for my situation. I hope this helps someone.

• Satellite A100-797: Vista Device Manager show different CPU speeds

  Hi all

  I had an an A100-797 with Vista Home Premium 32 Bit and I was cruising along the system properties. Via 'Control panel system->' I saw the spec CPU as

  Processor: Intel (r) Core (TM) 2 CPU T7200 @ 2.00 Ghz, 2.00 Ghz

  Then I checked the CPU the Device Manager section, he showed me two CPU

  Intel (r) Core (TM) 2 CPU T5500 @ 1.66 Ghz
  Intel (r) Core (TM) 2 CPU T7200 @ 2.00 Ghz

  Do you think this is normal?

  Hello

  Check this http://support.toshiba-tro.de/kb0/TSB6C01O70000R01.htm

  Good bye

• Equium P200-11R: two different processors in my device manager

  Hello
  I have an Equium P200-11R.
  When I look at the system, the processor is shown as «Intel Pentium Dual CPU T2330 @ 1.60 GHz»
  However, in the Device Manager under processors I find; "Intel Core Duo CPU T7300 @ 2.00 GHz", then "Intel Pentium Dual CPU T2330 @ 1.60 GHz!"

  Why is there another treatment showing, (T7300)?
  I am extremely confused.

  Best regards

  Hi dude

  Don t you worry it s a bug of Vista simply.
  You must remove the CPU from the Device Manager, and then restart the laptop.

  After the reboot of the new Vista will recognize the NECK properly!

  Best regards

• Msinfo32 and Device Manager show different number of cpu in win 2008 R2 guest OS

  Hello group,

  This inconsistency happened only on a single server running windows 2008 r2.

  Poster 6vCPU Device Manager but the msinfo32 only 4.

  Could you please guide me in the right direction on how to understand this situation/problem.

  I checked the msconfig and some other items, but before making the changes, I would like to know if its designed that way in any specific combination.

  Kindly let me know if you need further details to help me understand the process or the issue in the case.

  Thank you.

  What edition of Windows Server 2008 R2 do you have? If it is standard, so it has 4 CPU limit.

  Windows Server 2008 R2 - Wikipedia, the free encyclopedia

• Why Vista offers two different processors in my A200 SP?

  Hello world.

  I m new here but have a very important question for my new laptop that I just bought. OK here goes if someone can help?

  Just bought my new Satellite Pro A200GE - 26 Q Intel centrino computer core 2 duo t7500 2.2 ghz, which came with 2 GB of RAM that I ve already upgraded to 4 GB of RAM, immediately and wow it's such a beautiful machine tosh laptop computers great build!

  The problem I have is that when I go into Device Manager and processor link, it shows the two processors, one a T7300 @2. 0 ghz and a @2 T7500. 2 GHz... now I know the speed may be slowed down due to the power save etc, but surely, it should show BOTH seek the SAME IE [email protected] and [email protected] instead of the T7300 above @2. 0 ghz.

  Have I sold a laptop with wrong / different processors in? Maybe by mistake and one another thing is RAM shows 3070MB (3 GB) and I know that some systems use the rest but I thought that vista home premium was supposed to show this... I am not upgrading to vista x 64 will make the best use of it, but as I read on many forums when you run on x 64, you have a lot of driver problems and the hassle is not worth. So please help me with this problem of processor.

  Can I get a pair? Thanks again.

  Newbie Paul

  Hello Paul

  Before I write something, can you please use the advanced search on this forum and try to find the only answer. These two themes are discussed several times before.
  If you still need assistance please write again and you will get your answer.

• Tecra M2: XP Device Manager shows 4 yellow exclamation points

  Hello

  I had too to recharge my laptop with XP and have 4 devices in the device with the yellow exclamation point Manager.

  Ethernet controller
  Network controller
  Unkown
  Multimedia audio controller.

  I have havetried to install drivers WITHOUT success.
  I have tried loads yet joy o,

  I'm missing something.
  Can someone help

  Hello

  I'll try to identify the devices without plug & play id, but I can't guarantee anything.
  If something is wrong please post the PnP - ID (Device Manager-> properties-> details-> ID devices material).

  Ethernet controller is Intel Pro/100 VE or Intel Pro 1000/MT (both have been integrating M2) network adapter
  http://support.toshiba-tro.de/Tools/updates/LAN/LAN-XP-8790.zip or http://support.toshiba-tro.de/tedd-files2/0/lan-20070912134727.zip

  Network controller is Intel Pro Wireless 2200 GB or 2100 (same as above, both were build most of the cases. Others like too Atheros and Cisco, but not so often)
  http://downloadmirror.Intel.com/13000/Eng/11.5.0.0_xDrivers.zip or http://downloadmirror.intel.com/11918/eng/Intel (R) PROWireless21_125836.zip

  Unknown device of infrared
  http://support.toshiba-tro.de/tools/Tecra/TM2/XP/IrDA-TM2-XP-5125000.zip

  Multimedia audio controller is the SoundMax
  http://support.toshiba-tro.de/tools/Tecra/TM2/XP/sound-TM2-XP-512015160.zip

  Please allow me two questions:
  Why don't you use the recovery media. It is much easier?
  Have you tried to install any driver Toshiba driver page? http://computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Qosmio - Intel (R) Core (TM) 2CPU - system showing two different CPU

  Hi, please, what do you think about this my Qosmio PRTSC? ;)

  Intel (R) Core (TM) 2CPU system presents two different entries of the CPU

  Cheers, Hana

  Post edited by: admin

  Hello Hana

  Can discuss us please on the English language? Sorry but I can't read anything on the link you posted.

  If you have a question or want to discuss something, please try to explain it using the English language.

• XP Device Manager shows me 'PnP BIOS Extension' with a yellow top flag

  I tried to load the new software for an HP printer and it would not load correctly. I checked the Device Manager to see if the USB port has an error, but instead I see an icon with a yellow flag on it in "System devices". The name of the icon is 'PnP BIOS Extension'. I just click the mouse over it to see the Properties , and there are three tabs: general, pilot, Details

  the device status window general tab has this message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39).
  
  
  Driver tab, it says:
  Driver provider: unknown
  Driver date: not available
  Driver version: not available
  Digital signer: not digitally signed
  On the Details tab, it says: ROOT\SYSTEM\0003
  I tried the driver but it failed with the message: the hardware was not installed because the wizard cannot find the necessary software.
  
  
  Can someone help me understand how to fix this problem?

  Well you can right click on it, select "update driver..." Or, try to update the

  Hp BIOS, if its current, you may have a defective battery on board, it would be

  give some data, but perhaps not all, anytime, cold weather brings on battery

  and the questions of the bulb... Also, try to update the software of the chipset advice, get it from its

  MFG (intel, amd, etc.), which gives the ability to run hardware tips xp...