iPad does not illuminate
Hello everyone,
I have an iPad Mini 3. Today, as I turned off my iPad because an application crashed at different times. But once I turned off my iPad I could not turn it back on, even though I tried to reboot the iPad more than once with mode 'emergency', held at the home and power keys. (I even tried to charge it, but the problem does not have to be the battery). If I press the power button, the Apple logo appears, but then after about a minute it disappears and I can repeat this action but nothing happens. I also tried to connect the iPad to my Mac, but it seems that nothing is connected.
Anyone has an idea on what I need to do? Thank you very much in advance!
Hello Beasalby,
Try to put your device in recovery mode by following the instructions in this link If your iPad, iPhone or iPod touch won't turn on - Apple Support after that you did restore through iTunes.
Hope that solves your problem
Tags: iPad
Similar Questions
-
The symptom is more simply not turn on:
It happened a few times before (within two weeks) that the ipad just froze and turned the icon apple black and white background. After working in the home/power together for a while, he fixed the situation. Last night, the white background happened again and I tried both home/power buttons. But he remained in an infinite loop power. Then I went to bed. This morning I loaded for more than an hour and just, it does not turn on, not even the white background.
If I take her to the store, be something beyond? The warranty has expired, so if a part needs to be replaced, it might be expensive and I prefer to buy something new.
Have you tried to restore the device? If you do not have an appointment at the Genius Bar, they will examine and diagnose the unit free of charge. From there, they will provide you with options. They do not repair the iPads, they replace them with refurbished appliances. If the warranty has expired, the elimination of costs of replacement warranty applies. That depends on your location, but you should be able to get an idea here. Apple - Support - Service Response Center If this isn't the case in the United States, you must ensure that you change your country in the drop-down menu. If you after registration, you can always buy a new device.
-
13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.
This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.
-
iPhone 6 with iOS9.3.4.
WiFi button does not illuminate. I rebooted the phone. How can I make this button of the device?
You can always update your firmware with iTunes. But it seems you might have a larger, likely hardware problem with your phone.
Try to restore the firmware with iTunes. If this does not help, make an appointment with a genius at the Apple Store.
-
My MacBook Air does not illuminate
MY MacBook Air does not illuminate?
Nothing happens when you try?
Power light?
Tones? Startup chime?
If you connect to the charger, which is LED color on the card?
-
MY iMAC, which is several years old does not illuminate
Take the test/diagnosis. Nobody here can 'pull' hardware problems.
Barry
-
2009 iMac 21.5 does not illuminate
My 2009 iMac monitor is black and does not illuminate. It has been connected to different computers, macbook pro and a mac mini with the same result. Is there something that can be done or is it just toast?
Try to zap the PRAM or reset the SMC.
Board: https://discussions.Apple.com/docs/doc-3603iMac SMC and the PRAM reset
Otherwise, take the model to your local store from Apple or a DAD.
-
New Ipod Touch does not illuminate
Buy IPod Touch last summer (August 2015) and died this morning. Can not activate it or it will load. Any suggestions?
Try the following steps:
- Press and hold the home and power buttons at the same time for at least 15 seconds until you see the Apple Logo.
- If this does not work, load your iPod for at least 10 minutes, or until the Apple logo appears.
- If none of the steps above do not work, here is a link to give you more information: If your iPod touch does not illuminate
- Be sure to contact the Apple support if you need more help.
Good luck!
-
Toshiba 40 L 345 * DB does not illuminate
Hi guys,.
I wonder if someone can help me. I have TV model, above, that does not illuminate. His age of only 18 months. the power switch flashes between grreen and Red intermittently every seconds.
Any thoughts?
Rgds
Kedders
Hi Kedders,
I just encountered the same problem. While watching the TV, it shuts down suddenly. Even model & 18 months and now dead. If I leave it plugged in now, we get the same thing - the power switch flashes between green and Red intermittently seconds or - but no picture at all.
What's wrong?
Kind regards
Chris_UK
-
Satellite Pro C660 does not illuminate
Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.
any suggestions?
Hello
On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
After doing this connect the power running and try to start again.What happens when you do this?
-
3rd gen iPad does not load only red battery
My iPad suddenly not charge or sync. I only get the empty red symbol and or the Apple logo when I unplug and re - connect the charger cable. It will not turn on. I use the same USB cable comes with the iPad and have also tried my iPhone cable with my iPhone AC plugin but the results are the same. I had each cable connected for 24 hours and nothing. The iPad is not recognized by iTunes is indicated anywhere on the computer with one small exception. When you use the USB cable to charge/sync with my computer I get a message window telling me new iPad software version 9.3.1 is ready for an update, but when I click on update I get a message error "iPad cannot be synchronized. An internal error has occurred"and"an unknown error occurred (-50). My iPad does not appear as a device on iTunes. I tried to do a reset by pressing the sleep/power button & the big button on the screen, but nothing happens.
Thanks for any other suggestions to get this ipad works again
Have you tried the steps outlined in the article below? If so, I would recommend taking the iPad at the Apple Store for the assessment.
If your iPhone, iPad or iPod touch does not respond or won't turn on - Apple Support
-
Satellite L500-1DT does not illuminate
My laptop does not illuminate unless the switch the off market cable is disconnected and the connections are bridge on the motherboard. Any suggestions please?
You start your mobile phone if the battery is removed and the laptop connected to the power supply current only?
-
My iPad does not have a Finder icon
MY iPad does not have a Finder icon
tylerjimbo321 wrote:
MY iPad does not have a Finder icon
I think that it is only for Macs.
-
Satellite M30X-127 does not illuminate
Hello
Need help!
My satellite M30X 127 does not illuminate. When I push the power button, it is DIRECTED in turn. But nothing comes on the screen. There is no sound and the fan does not start. I took it to a repair center and they told me the motherboard is fried and it will cost me 400 pounds to fix.
The guy there offered my 100 pounds for to buy me.
Please a little help. What should I do?Hello
Otherwise you will search in ebay for the second hand with the good motherboard unit.
Sometimes people sell books with the failure to display or other parts of damage, but the motherboard is ok.
You can try to use second hand motherboard in your laptop. -
I'm working on this machine, and I am new to laptops.
Client introduced, with only light, but the computer does not illuminate.I'm the battery charge with the strings that came with it and a wall socket in good condition. The indicator flashes yellow. I will continue to read the forums, but none seemed identical to that.
I have download guide the user and the data sheet.
The device seems intact, unharmed. Customer does not have knowledge of the condition/battery maintenance. Asked about this, he said, the wires are all here - and it is plugged.Thank you
NanHello
LED flashes orange?
If you mean the DC-in LED if it flashes orange if the output voltage of the adapter is abnormal or if power outages.
If you mean the Power LED so it flashes orange while the computer stops if you select sleep mode.
If you mean battery LED if it flashes orange when the battery reaches a low battery indicator.I think you should check if the AC adapter has no malfunction and provide enough power.
I think you should also try another solution that I found in this forum.
So to remove the battery and unplug the AC of the laptop and wait form (10-15 min) then several times the battery and connect the AC to the laptop and try to start the laptop.
Eventually, it helps.
Maybe you are looking for
-
A page is my home page, another is welcome to Firefox, and the other is my LassPass. Can anyone tell my why this is happening?
-
HP laptop: scope and the wifi signal strength
very very weak signal wifi and range signL force is very low, even I'm sitting near router I try every thing but not solve issue please help I use window 8 pro
-
Problems installing of printer 1022n w / Windows 7 Enterprise
My workplace has climbed to Windows 7 Enterprise (64-bit), and I'm currently not able to use my HP 1022n printer. I found the site to download the driver 1022n, but to halfway through the installation process I get an error message that the driver is
-
Driver for HP Officejet 6700 Premium
Need Driver for MS Windows XP run HP Officejet 6700 Premium
-
delete reports and custom forms
Hi allEBS R12.2.411 GR 2OL6.5Our developer created customized reports and forms the module AP.She put programs on the repertoire of forms and AP reports.When I run autoconfig, all programs when the abducted.How to avoid this problem?She said they are