Toshiba 40 L 345 * DB does not illuminate

Similar Questions

• Satellite A300D does not illuminate

  Toshiba Satellite A300D does not illuminate

  The battery light is red when it is plugged in with the light of the white plug

  When I press the power button it lights up two other fires, and one that looks like a sheet a4 fact paper.it a vibration when turning it on also.

  Any help would be greatly appreciated

  Disconnect the power adapter and remove the battery.
  Leave the laptop unplugged and then hold down power button / stop along 30 sec.
  Then reconnect the two parts and check how the unit works.

  In which case nothing would be visible on the screen, try replacing the RAM modules. Perhaps one of the modules is the troublemaker
  Otherwise if the RAM modules are OK, the problem could be linked to the motherboard.

• Equium A100 does not illuminate

  My A100 does not illuminate. Anyone have similar problems?

  I had a little trouble with the plug of the AC adapter into jack but have managed to get charged. When I put now the head in the light orange is on, but nothing else and it will not start.

  I would be grateful for any help.

  Hello!

  What problems have you had with the AC/DC adapter?

  In this case, you can do many things to get this working again, but you can try to remove the adaptor AC/DC and battery. Wait an hour and reconnect both devices and try it.

  If it doesn t work I think you will need help of an ASP. :(
  On the Toshiba site, you can search for the closest: http://eu.computers.toshiba-europe.com => Support downloads & => find an authorized service provider

  Good bye

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• iPhone6 the wifi button does not illuminate.  I want to download the new update.  I restarted the phone, my router is active.

  iPhone 6 with iOS9.3.4.

  WiFi button does not illuminate.  I rebooted the phone.  How can I make this button of the device?

  You can always update your firmware with iTunes. But it seems you might have a larger, likely hardware problem with your phone.

  Try to restore the firmware with iTunes. If this does not help, make an appointment with a genius at the Apple Store.

• My MacBook Air does not illuminate

  MY MacBook Air does not illuminate?

  Nothing happens when you try?

  Power light?

  Tones? Startup chime?

  If you connect to the charger, which is LED color on the card?

• iMAC does not illuminate

  MY iMAC, which is several years old does not illuminate

  Take the test/diagnosis. Nobody here can 'pull' hardware problems.

  Barry

• 2009 iMac 21.5 does not illuminate

  My 2009 iMac monitor is black and does not illuminate.  It has been connected to different computers, macbook pro and a mac mini with the same result. Is there something that can be done or is it just toast?

  Try to zap the PRAM or reset the SMC.

  Board: https://discussions.Apple.com/docs/doc-3603iMac SMC and the PRAM reset   

  Otherwise, take the model to your local store from Apple or a DAD.

  

• New Ipod Touch does not illuminate

  Buy IPod Touch last summer (August 2015) and died this morning. Can not activate it or it will load. Any suggestions?

  Try the following steps:

  1. Press and hold the home and power buttons at the same time for at least 15 seconds until you see the Apple Logo.
  2. If this does not work, load your iPod for at least 10 minutes, or until the Apple logo appears.
  3. If none of the steps above do not work, here is a link to give you more information: If your iPod touch does not illuminate
  4. Be sure to contact the Apple support if you need more help.

  Good luck!

• Toshiba 40 HL 93 R does not remote or and door panel

  Hi all.
  My Toshiba 40 HL 93 R does not remote or and door panel.
  I guess the TV is blocked or immobilized because remote is 100% functional.

  How can I unlock TV? Combination or other. I can't find anything in the manual of the TV

  I put t think that the TV is locked... to my knowledge, it is possible.
  You can block single channels setting a password, but this does not affect other functions of the TV.

  Disconnect the TV from the food sector and wait a little crisper.
  Connect the TV to the network, then press power button to power ON the TV

  It work?
  In case it doesn't, you should contact the service point because it seems that your TV equipment is affected.

• Satellite Pro C660 does not illuminate

  Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.

  any suggestions?

  Hello

  On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
  After doing this connect the power running and try to start again.

  What happens when you do this?

• Satellite L500-1DT does not illuminate

  My laptop does not illuminate unless the switch the off market cable is disconnected and the connections are bridge on the motherboard. Any suggestions please?

  You start your mobile phone if the battery is removed and the laptop connected to the power supply current only?

• Satellite M30X-127 does not illuminate

  Hello

  Need help!
  My satellite M30X 127 does not illuminate. When I push the power button, it is DIRECTED in turn. But nothing comes on the screen. There is no sound and the fan does not start. I took it to a repair center and they told me the motherboard is fried and it will cost me 400 pounds to fix.
  The guy there offered my 100 pounds for to buy me.
  Please a little help. What should I do?

  Hello

  Otherwise you will search in ebay for the second hand with the good motherboard unit.
  Sometimes people sell books with the failure to display or other parts of damage, but the motherboard is ok.
  You can try to use second hand motherboard in your laptop.

• Tecra M2 does not illuminate

  I'm working on this machine, and I am new to laptops.
  Client introduced, with only light, but the computer does not illuminate.

  I'm the battery charge with the strings that came with it and a wall socket in good condition. The indicator flashes yellow. I will continue to read the forums, but none seemed identical to that.

  I have download guide the user and the data sheet.
  The device seems intact, unharmed. Customer does not have knowledge of the condition/battery maintenance. Asked about this, he said, the wires are all here - and it is plugged.

  Thank you
  Nan

  Hello

  LED flashes orange?
  If you mean the DC-in LED if it flashes orange if the output voltage of the adapter is abnormal or if power outages.
  If you mean the Power LED so it flashes orange while the computer stops if you select sleep mode.
  If you mean battery LED if it flashes orange when the battery reaches a low battery indicator.

  I think you should check if the AC adapter has no malfunction and provide enough power.

  I think you should also try another solution that I found in this forum.
  So to remove the battery and unplug the AC of the laptop and wait form (10-15 min) then several times the battery and connect the AC to the laptop and try to start the laptop.
  Eventually, it helps.

• Toshiba accessibility TACSPROP (Fn keys) does not work on my Satellite A100

  Laptop A100-097

  I am facing a problem with the extraordinary on my keyboard * FN keys * managed by program "* TACSPROP.exe*" which is located in *C:\Programmi\Toshiba\Utilities\.*
  This program does not start automatically at startup and if I manually run his way a window is also come say * "Questo sistema non Può utilizzare Toshiba Accessibility" * (in Italian: "" * cannot use this system Toshiba Accessibily * ' ").

  I can't identify the installation program appropriate for the program in the list of drivers that you provide support download page, but I can tell you that the program is in the same directory where the Software * Hardware Support * is installed.

  Please, can you provide me with the Setup program for this program? I think I'll have to try put it back.
  Is it possible, that it has been marked as a Spyware of Vista or AVG? Maybe some windows update changed something...

  Help, please!

  Thanks in advance

  Hello

  These types of problems are very strange to me, and I wonder why this happen. The fact is that the recovery image (recovery DVD) is very well set up and there is absolutely no problem with the use of the FN keys. All these functions of FN keys are tested and it should work. All the necessary services will begin with OS and you must be able to use all the key functions of the FN.

  I don't want to speculate what the problem is here, but I can't imagine you have this problem on the first day.

  Now the question is: why is that you get? Using the factory preinstalled OS or you have installed your own version of the OS?