IPAD look black screen - like black but no curtain

Similar Questions

• Camileo P100 screen is black, but the noise from the unit

  Hi all
  I just bought a Camileo P100 and fully charged.

  Although it seems to work when you take a picture the camera 'clicks', the video recording the LED flashes, the touch screen is black and I don't see anything.

  When you touch the screen, it doesn't seem to be working (there are noises from the unit when I touch the screen), but the screen is black.

  Can anyone help?

  Thank you
  Mark

  Hello

  Try, press and hold the button On / Off a few seconds.
  Also check if the opening of the camcorder is open

  But it looks a bit like a hardware problem.

• My lenovo ZTE A1000-G screen black but on

  My lenovo ZTE A1000-G screen black but on I can not do anything by pressing the power button / stop + flight, until the touch pwr, touch pwr + low-flying and flying up and down but nothing happened please help what I do to solve this problem, it happened when I was playing a game in the middle of a game in progress lag and when I press the power button the screen turn black, but always on it please help...

  This is my new tablets...

  (Sorry for my bad engglish)

  Hi Grenven,
  Do what I say to reset (restart) your Tablet: -.
  --> Memory location opened by card (SD card).
  -> Take something thin and sharp as a safety pin or a toothpick.
  -> Now, you will see a small hole like structure near SD card slot. (In fact it looks clearly if there is something on the inside, but there are.)
  -> Spend your pointy thing in this hole up to a certain distance. (Pass slowly inside until you hear a clicking sound)
  -> Who has the reset button which will restart your tablet of any situation.
  -> Do not lose patience while finding the reset button. Do what I say and your tab will be back normal. Find it for the first time is a little more difficult but follow my steps, and you will get it.

  Good luck...!!

• Satellite L505 - 14 d: my screen is black, but the computer is still running

  I bought this computer in September and it worked fine except this time I had to reload the whole system because of two anti-virus programs, but I think that this has nothing to do with my problem. I've been on the PC, the other day, and all of a sudden it turned black. I wasn't doing anything unusual. When I looked at him the screen was all black, but the computer was working as he has always done. I also saw that the market and stop switch on the digital/lock pad would not react. (a green light appears when the caps lock/num pad is activated). What should I do to get this computer running again WITHOUT permanent black screen?

  Hello

  What happens if you press the power button / stop 4 sec long?
  You see the Red Toshiba home screen?
  Have you tried the external monitor or FN + F5 option?

  I think you should also try the common workaround;
  Remove the battery and unplug the AC adapter. Wait a few hours and reconnect the two parts. Then try to turn on the unit.

• Fusion 7.1.1 - Win 7 black screen after update, but still works

  After the last update of fusion, my VM 7 Win shows a black screen. The mouse is always visible on the screen, and everything is work and display the preview in the library window. I have disabled the accelerated graphics and still nothing, as well as updating my vmware tools. When I stop the virtual machine, I get the screen to show, but restarts, it goes black again, and rebooted several times.

  any thoughts? I have a bunch of stuff that I have to get out of it to the ability I have to erase and start over.

  Thank you!

  After a few other troubleshooting, I found that I was waiting on an update to OSX as well. Did the update, and everything came and works correctly. Figure I'll add that, just in case where someone is looking for a solution.

  See you soon.

• IPhone 6 dropped, the screen goes black, but returns to normal

  I dropped my iphone 6, initially, the screen was black, but everyting worked perfectly I could even take pictures. I put on charger and tapped on the back of the iphone and the screen comes alive and everything was normal, nothing strange occurred during use, but after blocking and leaving intact, the black screen again to open. I had to put it in the charger and the tap at the back as before. Now I can't leave my iphone intact or the screen will become black again. I need help please! Is there a solution for this or would I need to take it to a shop to fix it?

  Hardware problems should be diagnosed at the Apple Store, or an authorized service provider.

  My guess would be that you probably have a damaged connection or in bulk as a result of the fall. That is why she helps when you press back.

  Backup your phone to iCloud and iTunes (encrypted) while you still can.

• HP Pavilion dv6 - black screen on startup, but works using the secondary monitor?

  I use a Pavilion dv6 WV815AV, and I used it for 3 years now.

  I tried to start the computer and the fan and lights are lit, but not the monitor.  I tried to plug in my high school, and it's that now treats as if it were the only screen.  I had problems in the past of a few times where I would get past the HP logo, and then there would be a substantial delay where the screen remains black but be illuminated, but most of the time that he would go to the screen connection, and if not, a simple reboot managed to solve the problem.

  Thoughts on how should I solve it?

  Thank you!

  Hi mybluesock, sorry to hear that you have a problem with the monitor not just not. I did some research and I found a document that can help you. Click on the link for the document.     http://support.HP.com/us-en/document/c01997899

  If this does NOT resolve the problem, please do not hesitate to write back and I'll do more research on the issue.

  Thanks in advance

• Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.

  Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.  Just reinstalled MP 11, same problem.

  Hello

  · What is the number and the model of the computer?

  · This occurs when you are working on any specific file format?

  · Were there any changes made on the computer?

  · You play the file in mode full screen?

  Change hardware acceleration

  a. you can try to change the hardware acceleration in the middle and check (you can try another level too.)

  b. right-click on a space empty on the desktop.

  c. go to the resolution of the screen.

  d. click Advanced settings, and then click the "troubleshooting."

  e. set hardware acceleration in the middle. (Here you'll get the only option your video card sound support).

  You can also check: you receive an error message of codec or audio plays video but does not play when you play media files in Windows Media Player 11: http://support.microsoft.com/kb/926373

• I lost my laptop screen after trying to set my display properties. I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it. What gives?

  I lost my laptop screen after trying to set my display properties. I reformatted recently, everything seemed to work, I loaded SP2 who gave me the poor quality screen while trying to fix it. Now, I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it.  What gives?

  "Ineedafix" wrote in message News: * e-mail address is removed from the privacy * .com...

  I lost my laptop screen after trying to set my display properties. I reformatted recently, everything seemed to work, I loaded SP2 who gave me the poor quality screen while trying to fix it. Now, I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it.  What gives?

  Start the computer in safe mode (press F8 continuously immediately after power and don't worry beeps when you press the button) and let it boot without a network.  Once there right click on the desktop and then click Properties.  Click settings and the value of the monitor mode (640 X 480) VGA or SVGA (800 X 600).  Accept the changes and restart the computer.  You should have a mediocre screen, but you should see it now.  Download and install the appropriate drivers for your video card in the laptop to the web site of the manufacturer of the laptop.  Install the drivers and then you should be able to set the display of the laptop to the correct native resolution for your computer monitor (must be in the documentation of the laptop).

• After I publish my movie with windows maker movie at 03:00 in the video, the screen goes black, but the music is not yet how to fix this?

  After I publish my movie with windows maker movie at 03:00 in the video, the screen goes black, but the music is not yet how to fix this? all past images 03:00, but the video clips don't.

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  Solve problems with publishing a movie to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Make a movie in four simple steps

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-a-movie-in-four-simple-steps

• Screen black, but still clocked

  Hello, I have a problem. I'm using Windows 7 home edition. and that's the problem. This happens for 2 weeks, I was chatting with my friend, all of a sudden my screen went black, but my CPU still running. then I restart my computer, after the turn of the cpu on a couple of minutes later (5-15 minutes) the screen went black again. my anti virus do not show any threat, and after the black screen, I can't press CTR + ALT + DEL to Task Manager to get out. but then the still CPU running. Please help me

  Hello

  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  References to Vista also apply to Windows 7.

  No registration necessary data and re - install Windows 7 might be the best option, but here are a
  few others.

  You can save your files by putting the drive in another computer or an external hard drive enclosure, then
  saving them. Do this using several methods to redundantly. Of course, a real computer
  Shop or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.

  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a window 7 disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
  it.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  You can create a recovery disc or someone else use same version (to do the system restore
  It only needs to be bootable).

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ------------------------------------------------

  These require good Windows 7 drives (especially if you can not start safe mode).

  Try the Startup Repair tool-

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  Try Repair Options recovery or a Windows 7 boot disk system

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  If nothing works, you can do a repair installation.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Windows 7 boot disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• IPad 2 - black backlit display

  Hello

  This morning, I dropped my Ipad about 2.5 feet, I tried the combo 'Home and the power button': the white Apple appeared as a normal launch but then the screen turned black with backlighting. Whenever I tried to press the power button, my home page appears in a bare Flash, and then everything went black again.

  I also tried the reset via iTunes, but it did not work because my Ipad is connected to the cloud. So I tried the update via iTunes that has worked and now when I start my iPad, I have the "Hello" page with no problems and the Ipad becomes black again when I have to enter a new code. The software seems to function as well as the touchpad, because every time I activate VoiceOver, he described the page I don't see. Help me please!

  You can retry the forced reboot, see if that helps.  Press the sleep and home for about 20 seconds. See if you can see the silver Apple. When you let go and let finish restarting.

  Part of me thinks that the digitizer is damaged, but you see not starting the process any results (see the Apple but not the screen, once he finishes the boot upward)

  Amother thing that you can try - even if you don't try this at your own risk - is to gently slap the back of your device. If something was jarred loose you the jar in place. Of course you might all like Let's finish kill so certainly do it at your own peril.

  One other thing that is safer to do would be to make an appointment at your local Apple store and have them check. Of course the 2 is an older device and probably out of warranty so all you can get from them is the offer of an out of warranty replacement. And honestly, if I were given the choice of spending a few hundred dollars replacing a 5 year old unit or shelling out a bit more for a newer model, I would go for the new model.

  To end, even if your device comes back you can prepare yourself to have his last days. Because if she does once he can do it again.

• 4 IPad keeps going to power off of the screen, the screen is cracked but do not know if I need to replace the screen button or power?

  4 IPad keeps going to power off of the screen, the screen is cracked but do not know if I need to replace the screen button or power?

  Press the sleep/wake and Home buttons and hold for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• String nouvis did my video go black but I still audio

  I use first Pro, Im working with a handheld home video DSLR (500 MB 2.5mins) and slide the stabilizer option of curvature to the timelime, after it is completed, my preview window was black, but I could still hear the audio, I guess it has something to do with the balance or the positioning of the video, but I'm not sure.  any advice on how I can center so I can see it? Thank you

  You can also try the process with a small segment of your clip.  A 2.5 minute clip is a mouthful for stabilizer of distortion even on a powerful computer.  See what's happening with a clip of five or ten seconds. I would like to make a subclip with no tail - you will get a question 'do you want to limit the clip', 'Yes, do you' is the answer.  Try to stabilize that.

• I can't 'click' on the top inch of any screen in the case of firefox. It won't let me sign in and out of some Web pages. This happens not when I'm on my desk or using IE. I like firefox, but it's frustrating. Help!

  I can't 'click' on the top inch of any screen in the case of firefox. It won't let me sign in and out of some Web pages. If I reduce the screen that disappears not or the other. This happens not when I'm on my desk or using IE. I like firefox, but it's frustrating! Help!

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the Firefox 4, 5, 6, 7 SafeMode pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox SafeMode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes