IPad 2 - black backlit display

Similar Questions

• After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

  After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

  If you see the lock of Activation screen after update your iOS device, you want to try the following:

  -Restart your iOS device and try to connect again.

  -Visit appleid.apple.com and log in to ensure that your password is correct.  If you change something here, only to change your password.  Try to connect again on the iPhone.

  -Connect on iTunes on a computer and put your Apple ID and password when it prompts you (as it did on your iOS device).

  -ICloud.com check in the settings.  If you see your iOS device listed, remove account (do not erase or hit lost mode). Restart your device and try to reconfigure.

  -These measures should solve most of the problems.  For someone else, you will need to contact Apple (1-800-MY-APPLE or getsupport.apple.com).

  I hope that helps!

• Windows Vista does not load all the black white backlit display.

  I'm repairing computer of my aunt. It's a laptop gateway M-6320. Windows Vista. It loads the bios and goes through the MAIL. After the POST, it just goes to a screen backlit black white with no mouse and nothing happens.

  Tried to change the boot order to boot from the cd first and put the disc of windows 7 in to run a repair (I don't have a vista cd), but it does not always load. everything sounds like it turns on and works fine. the dvd sounds like it runs for a few seconds. I also tried to boot from usb with windows 7 there. still won't load what it is. I took out the battery tested cmos it is 2, 5V. I think it was. still nothing. I left the computer for a whole night. still nothing. I changed the hard drive even though it sounds like it's working. still nothing. I even tried a windows xp cd in the freak chance, it was a bad cd. and nothing is connected to the computer while I'm trying to start. He's not going for advanced options or to try safe mode.

  I also tried to put the memtest on USB, but it will not load anything from him even with usb as the first boot option. and I tried different usb drives also.

  I can't figure what's wrong... my only thought is that the bios is corrupted or the RAM is bad. Anyone have any ideas? Oh and the bios is Phoenix

  Hello

  Since you've already tried all the troubleshooting steps, including booting from a Windows 7 disc to repair the Windows installation. If all else fails, then I think that
  It's a hardware problem. I suggest you contact the manufacturer of the laptop computer or take it to a tech store to get help.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit ourMicrosoft answers Feedback Forum and tell us what you think.

• screen of the iPad 2 black after updated 9.3.3 update

  Hello my iPad 2 upgrade 9.3.3 and after the update automatically its only show black screen. I have hard reset and then released factory with iTunes, the problem persists. I tried to go back to 9.1 (who was the current version) with ipsw but iTunes cannot me tell my camera is not compatible with the 9.1 (similar problem occurred with 9.2 but I managed to roll back this update to 9.1.

  How can I solve this problem? Thank you

  iPad 2 model A1396

  He did not have many complaints reported install IOS 9.3.3 then we are at the best time to guess the issue. Have you tried install IOS 9.3.3 via iTunes?

• IPAD look black screen - like black but no curtain

  Hello

  I have an IPAD 16 GB Wifi Silver Air and I have the following problem.

  Recently (maybe to do with the upgrade to 9.3.1 but I can't be sure) after playing with the IPAD for about 20-30 minutes the screen goes black while I hear that the ipad still works (IE play a video). The touchscreen is sensitive, but nothing appears. I can get it back if I press the button sleep on and outside and asks me to slide to unlock. First, this happens so the frequency of the black screen is more faster, every 5 minutes and then every 2 minutes. If I let it cool then I can work for 20-30 minutes and I have the same behavior again.

  I tried the hard reset with the buttons,

  I tried factory defaults restore with iTunes as a new ipad

  I tried enabling black curtain with three fingers and disable it

  I disabled / enabled siri

  I tried to tap on the back as suggested by some users. I turned to auto-lock forever. But always the same behavior.

  Can you please help. Does anyone else have this behavior? How can I go down to see I

  Best regards

  Konstantinos

  Take your device at the Apple Store. This may be the problem of equipment.

• Re: Satellite M100-221: screen turns black, moving display

  Hello

  I have a problem with the LCD on toshiba satellite M100-221.

  When I move the screen, the screen goes black.

  The display only works correctly when the angle is close to 90 degrees.

  Hey Buddy,

  I m not a technician but I agree with the user above. For me it looks like a hardware problem and you should go to a service provider allowed. Technicians can check your defective parts for computer laptop notebook and Exchange.

  You can search for the nearest Toshiba for ASP site. ;)

• Get a black screen display during the installation of the center of Catlyst ATI in Windows 8 Pro

  HP Pavilion dv6t-3100 CTO Entertainment Notebook PC Serial number (S/N): product number [personal information deleted] (P/N): ww142av of operating system: Microsoft Windows 8 Pro (64-bit)

  Get dipslay black screen when I tried to install the latest ATI Catalyst Center (ATI CCC) in my laptop. After restarting my laptop too, I get the same screen for balck disply.

  When I was in Windows 7 Home Premimum I am able to swicth the ATI to Intel grsphics display option. After upgrding to Windows 8 PRo that I am faced with this display problem. Is this related to the software HP power manager or even in connection with the question of compatibility Windows 8 PRo.

  Please help me to solve this problem as soon as POSSIBLE.

  Click with the right button on amd drivers and click on update driver. After "Browse my computer for driver software" => 'Let Me pick from a list of drivers on my computer'-online 'have disk... '. "and stick to the location of W76A_INF.

  And have you tested uninstall intel hd graphics card before you install amd?

  Well, I really prefer to install drivers leshcatlabs instead, they are more up-to-date drivers.

• Black screen / display problems

  I have a MBPR13"(early 2015) which I think has integrated graphics intel 6100.

  I've been running windows via bootcamp on the mac since I bought it, first with win8.1 and for a year or two, win10. A couple of weeks, however, windows crashed and wouldn't start. I can boot into safe mode after 3 failed attempts at normal mode, but I couldn't diagnose the problem. I took the opportunity to carry out a complete new installation of OSX and Windows 10.

  However, while OSX continues to work very well, Windows 10 still will not work. It installs successfully, and then gets to the point where the wizard Bootcamp installs all the drivers - it seems to be ok until that display then goes off - I guess that's the point where the display drivers are installed. Windows is still underway, but all I get is a white screen.

  After much mucking to plug and unplug the screens I can sometimes get an image on an external monitor or on the built-in screen. The computer screen does not fill the screen (bottom 25% of the screen remains empty) and windows cannot detect both screens at the same time. In any case, in a few seconds to lift an image on the screen, windows crashes and restarts.

  I suspect that it is a driver problem, probably related to a recent windows update - note my new installation is based on the current windows (as of today ' hui) 10 ISO download available from microsoft, so I guess this includes all applicable updates and I have no way to drive to a previous version.

  Can someone from apple what comments can you do on this point, hopefully identify that it's just a driver problem and update the bootcamp windows software support for my MBP so I can get Windows successfully facing up and running? Otherwise, any other suggestions on a fix?

  Thanks in advance

  Mike

  Updated - uninstall the display driver Intel 6100 temporarily solves the problem (of a point - the works of laptop display once again, but of course without hardware acceleration or connectivity external monitor), although 10 windows automatically reinstalls the drivers a few seconds later, resulting in the return of the issue.

  I was able to continue to use the laptop only by disabling the graphics card. However this clearly is not a solution, but simply points to the fact that the display driver is the issue.

  Everything apple comments? Surely, this affects a lot of users and not just me? Is an update to the driver on the way?

• iPad 4 with retina display screen becomes completely white

  I have had my ipad for a couple of years and just recently my screen randomly goes white. I tried holding the home and power button several times, I have also restored and upward he dated at ios 9.2.1 with no solution to the problem. A temporary solution, I have discovered is to place my ipad in a bag of ice and it seems to make the screen working again until it warms up again. Also in Australia with + 30 degrees celsius heat. Plug ios 9.2.1 model: MD512B/A, 64GB

  See you soon

  Probably from material. That I would take at the Apple Store for further diagnosis. Good luck.

• iPad 2, black screen, Seri speak again, but black screen

  Hello

  Please help, my IPad 2 went dark, Seri still, talking in charge mode.

  Try to force it to restart. Press the sleep and home for 20-30 seconds. If you see the silver Apple, let go and let it reboot and see if it comes back.

• Windows Explorer, some blue, black color display files.

  I have about 20 videos on my HDD, why are two appear blue? I'm not having any problem with the files I just want to know why, (NOTE; I have a C and a D hard drive. What's happened since I dragged these two files on the D drive, where they were copied from C to D)

  Hello

  Blue files are compressed NTFS.

  Why are some of my file names blue?
  http://ask-Leo.com/why_are_some_of_my_file_names_blue.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Vista Clean install fails on Reboot Final - multicolor screen pixelated

  I have already upgraded to Windows 7 on my Toshiba Satellite P205-S6237 and find that I have problems with starting and the display driver. Yesterday, I decided to downgrade using a Vista Home Premium install disk is no longer used in my house on any computer. I have booted from the disc and run a clean install on my disk 'Disk 0 unallocated space', and everything seems very well installation. Once the list of tasks installation is complete on the vista installation window, my computer restarted on the desk and a window came telling me that my computer knows final installation (not to interrupt!) and could restart when finished. After the final reboot, my computer seems to be nothing (black, backlit display) or a screen that is covered in stripes multicolored pixelated on the bottom half appears.

  I tried to restart my computer in safe mode (installation can not be completed it), pure install my image backup (the same problem occurs) and "revaluation" of XP (no previous windows OS found, so it will not be updated).

  If anyone has had the same problem or has any suggestions?

  PS: I forgot to mention that I tried the Startup Repair, and it tells me that there are no problems to report.

  If you experience this problem with the recovery and the DVd of Microsoft, the graphics hardware.

  We can not help you with hardware problems.

  Contact the manufacturer.

  Mick Murphy - Microsoft partner

• Not displaying Twitter account is not on ipad

  The twitter account, I got on my poster magazine correctly locally on my drive of content, but once that he discovered on the viewer of content adobe ipads that nothing is displayed. Thoughts?

  We'll, I solved my problem. Twitter address Moose I had on my container was http://twitter.com/#! / DODGE. I googled the address still once and it notice announcement

  Twitter.com /DODGE. It worked well on the ipad. Something to watch because if someone at - it never comes acorss this problem.

• Is there anyway in the light of the keyboard for the iPad Pro?

  Is there anyway in the light of the keyboard?

  Yes,

  Buy a combo of different case/keyboard has a backlight for the keyboard, as in the case of Logitech.

  http://www.Apple.com/shop/product/HJDW2VC/A/Logitech-create-backlit-keyboard-CAs e-for-ipad-pro-black? FNODE = 9 a.

  Good luck!

• iPhone 6s display problem

  Dear all!

  I own the iPhone 6 s.

  Also, I have iPhone 4s, 5s and iPad with retina display.

  My question is on the screen of the iPhone 6 s. In a different situation I see really good the pixels on the screen, especially when read background small black text on white (or gray) in a dark environment. It looks like grid or on the screen of all grains. I find iPhone features 6s display and there very high-density pixels - 326 PPP, but it does not help the issue. I tested it, trying to find pixels looking for relatives on the screen from different angles and sides, and I find pixels! Funny, no? =), but seriously, I would like to say that I don't have this problem on my other Apple devices: even on the iPad with the retina display, which has 264 ppi, that less than on my iPhone 6 s.

  Could you please explain, is this normal?

  Regarding.

  Visit an Apple Retail Store or Apple authorized service next to your place and you provider let take a look at your screen.

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support