iPhone 6 capricious loading

Hello

I started developing iPhone 6 questions in charge a little for months where the phone would not always make contact for recharge.

I tried to clean the lint/dust and also changed port to Apple OEM cable and charger, but the question gets worse over time, and now I get a message (with OEM Apple charger and cable) this accessory can be certified, so it cannot load.

I would take the phone to the store, but I got it for a little over a year, do not know how they would be covered by the warranty

Thank you

Hi pred02,

Temperament of charge does not look good. Thanks for the troubleshooting, you've done so far.

This loading message is addressed in this article.

Recharge your iPhone, iPad and iPod touch - Apple Support

If an alert says that your accessory is not taken care of or certified

These alerts can appear for several reasons: your iOS device could have a port of loading dirty or damaged, your loading accessory is defective, damaged or not certified by Apple or your USB charger is not designed to load devices.

Follow these steps:

  1. Remove all debris from the charge on the bottom of your appliance socket.
  2. Restart your iOS device.
  3. Try another USB cable or charger.
  4. Make sure you have the latest version of iOS.
  5. Contact Apple to set up the servicesupport.

For your service question, please see

Apple - Support - Service Response Center

We hope that get you it sorted soon.

Tags: iPhone

Similar Questions

  • Can I use my iPhone for the load

    Can I use my iPhone for the load?

    Yes

  • Why can I not hear my 6plus iPhone calls after loading the Apple Watch? If I don't answer the iPhone instead of the Apple Watch for incoming calls?

    Why can I not hear my 6plus iPhone calls after loading the Apple Watch? If I don't answer the iPhone instead of the Apple Watch for incoming calls?

    Hello

    It can help to cancel your iPhone in a Bluetooth headset pairing, if it is currently associated with it.

    -On your iPhone, go to: settings > Bluetooth > tap the info "i" beside your headset > tap Forget this device.

  • IPhone 6s maintains load, dying, then restart

    I downloaded the new update iOS last night 07/26/16. I woke up this morning and my phone is dead, so I loaded. It will show the battery charge on black background for just a few seconds, and then the white screen with the black Apple, then my home screen for less than a second before she dies. Does each charger that I own, and goes through the same cycle when I unplug the unit. I tried now pushed off the button, but at the time that I have the ability to slide to turn off, it dies again. I also tried now hold the home button and lock and nothing seems to work.

    These tips will help you to market your iPhone. If your iPhone, iPad or iPod touch won't turn on - Apple Support

    Take a look at this article to save your battery http://www.apple.com/batteries/maximizing-performance/

  • My iPhone does not load unless the cable is placed just to the right and the phone is still completely. Advice?

    Hey everybody. Since a few days, I have had a hard time charging my iPhone. It all started when my phone onto my computer. He suddenly began to vibrate, and the charging symbol flickered on and outside. Since then, I had to mess with the power cord plugged into the phone until it starts to load. Once it starts to load and remains always completely, is perfectly fresh. The problem is that I do a lot of work and outdoor recreation such as hiking, and I need to charge my phone on the road sometimes. But once I'm start moving the phone around, it does not load until I have reposition it. My phone had not been dropped, smashed, splashed with water, or something serious in several days or even several weeks before acting. This could be a software problem? I cleaned the inside of the charge socket and the charge lead works fine with other devices. I also restored the phone to factory settings and then restore a backup. Any advice would be appreciated.

    Clean the hole of the support and review it with a bright light. You must get it squeaky clean and without bending the rather delicate pins. And make sure that the bent pins.

  • iPhone 6s over load problem

    SO, I recently had an iPhone more 6 seconds, it gets the load very slowly and not enough hot while charging with another charger

    is this normal

    Sara Amir wrote:

    SO I had recently a 6s iPhone more, he gets the load very slowly and some not quite warm during charging with another charger

    is this normal

    It normally works with its own charger? If Yes, then do not use the charger on the other

    If you have the problem with the original charger provided in the box of

    Please take a genius appointment at an Apple Store, or select another authorized service provider.

  • IPhone charger can load the mini iPad?

    Hello

    I plugged the iPad with my iPhone charger mini, and it seems it to load but it is not.

    Is the iPhone charger can charge the iPad?

    Yes, it can, but more slowly.

  • 6 iPhone does not load and the screen broke

    Last week I went to the apple store because my iphone 6 are more charged correctly. This has happened for a while now and it has just stopped working. So I told them that and how I broke the screen during the time it did not work and they tried to do a diagnostic on it that wouldn't work if they sent away for repair. However, Im now be told that I have to pay to get my fixed screen to look inside my phone which makes no sense because you would need to open it anyway. Im still under 1 year warranty and it wouldn't make sense for me to pay to get my fixed screen probably for them to discover the non repairable phones and give me a new phone in any case. What should I do?

    Accidental damage not covered by the warranty, so you must either pay for the replacement of the screen (if that's all that is needed) or pay for an out of warranty replacement.  Whatever it is, if you have an iPhone running once again, you have to pay for repairs or replacement.  Your warranty is voided when you broke the screen.

    Paying Apple for the repair or replacement will be recovering the remainder of your original warranty or provide 90 days of warranty on the repair or replacement, according to the longest period of time.

  • IPhone 5 s loading using 5V / 2. 1A powerbank

    I bought a food bank whose output is 5V / 2. 1. Y at - it no problem charging my iphone 5 s using this powerbank?

    as long as the voltage of 5 volts, it can not hurt amps, it's just an indication of how MPAs can be drawn could be 100 and work very well.

  • iPhone does not load.

    Hello

    Then... I recently got my iPhone 5 (64G) - replaced white.

    The following items have been replaced:

    -front screen,

    -back camera

    -"home" button and

    -There is a slight bump on the upper right corner where is the lock button.

    The people that replaced my iPhone, it replaced with a black iPhone because there is no white iPhone 5 'body' in stock.

    So, I tried to recharge my iPhone for more than an hour and he won't come, it only displays "connection to the charger.

    You are able to solve my problem?

    Thank you

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

    More info here:

    https://support.Apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • Your binary is not optimized for the iPhone 5, Application Loader, ERROR

    I use flash builder 4.6, Air 18,0 on windows 7.

    I receive the error.

    Your binary is not optimized for the iPhone 5 - New iPhone apps and updates of application submitted must support 4 inches on the iPhone 5 and must include a launch image with the size-568 h modifier immediately following the < basename > the filename part of the launch image. The launch images must be PNG files and located at the top level of your package or provided in each .lproj folder if you locate your images of launch. Learn more about the iPhone support 5 and the app launch the images by reviewing the ' iOS Human Interface Guidelines' to 'https://developer.apple.com/library/ios/documentation/UserExperience/Conceptual/MobileHIG/ IconsImages/IconsImages.html#//apple_ref/doc/uid/TP40006556-CH14-SW5' and the 'iOS App Programming Guide' to 'https://developer.apple.com/library/ios/documentation/iPhone/Conceptual/iPhoneOSProgrammin gGuide/App-RelatedResources/App-RelatedResources.html#//apple_ref/doc/uid/TP40007072-CH6-W12 S'.


    I packed all type of style, one by a [email protected] Default.png, Default-568h@2x~iPhone.png etc, but eror won't.

    How to remove the error. I packed images and pictures on splashimage... one by one page by default.

    Now I am confuse to be it's mistake or apple Air or my error of flash builder.

    Please can you sat down.

    regarding.

    Naser.

    [email protected] is the size of the requested file, and it must have dimensions of 640 x 1136.

    Make sure that this file is included in your IPA in the top-level directory.  A good way to check is to rename "myapp.ipa" to "myapp.zip" and unzip and look in the top level of the folder structure.

    To get Flash Builder to include it in the IPA, place it in a folder that is included in your flash builder source tree (I use the "system" folder and make sure it is added separately to the project) and make sure that you have checked in the content area of the package:

    Additionally, make sure that you have "copy the files not included in the output folder", checked on this screen:

    Hope that helps!

  • iPhone 6, one side of load

    my iphone 6 now load only on one side, I tried different usb cable and no luck. After doing several searches online, I replaced the loading port and apparently did not help. phone is out of warranty so the apple support will do nothing.

    any thoughts of what could cause this?

    I do not understand your question?  What do you mean "only the load on one side?  Pin male lightweight port is bidirectional, but female lightning port has pins on one side.

  • IPhone charging 7 question

    Good if for some reason any, my iphone to stop loading, I used different cables and adapters, but the problem persists.

    To load it again I have to move my phone a little and it will start loading again.

    Hello samharl123,

    Please ask questions about your iPhone, recharge here in Apple Support communities. I don't know what I'd do without my iPhone. When I was traveling, I even had to buy a USB multi for my devices charging station, so I understand the importance of the power and portability! The description of your problem, it seems that the lightning cable is not correctly seated.

    Please test this with several cables and let me know the issue seems to occur with different cables as well. If the official Apple cable provided with the iPhone 7 is loose, or does not stay in the right place when you plug it in, and loading stops when (for example), you set it on the bedside table and have to jiggle it or adjust just to make sure, it remains to load or start charging again for you, then the port of loading on the iPhone should be checked by a technician of certified material. You can find a service provider using this link: Apple find locations. There may be other options available, depending on where you are, when you bought your iPhone 7 and the status of your warranty. If you want to ask what options are available to you, please contact an AppleCare Advisor using this link: Contact the Apple Support. I know they will help you professionally and promptly.

    Thanks again for visiting communities Support from Apple. Have a great rest of your day.

  • My iPhone 6s won't turn off. He is stuck on my message page and shakes.  What can I do?

    I plugged my iPhone 6s and loaded yesterday evening?  This morning, I hit the Start button and message with the time my page comes up but it shakes and will not delete by dragging the screen and will not turn off by pressing stop button on the side of the phone and the market.  What can I do?

    Hello

    Your iPhone became unresponsive, try restarting force holding down the sleep/wake and Home button for about 10 seconds, until you see the Apple logo.

    Restart your iPhone, iPad or iPod touch - Apple Support

  • How can I delete an email stuck in Outbox of my iPhone?

    I recently tried to send a video shot on my iPhone to an iPhone email using Apple's Mail application 5.  The email did not go out.  It is stuck in my Outbox apparently now trying 4 months actually download the video.  The thing just swirly swirling guard and nothing that I cannot delete or even reopen the email so I can change the video output or some other remedy.

    I can't help but feel that this activity is part of what is slowing down my iPhone and devours my power.

    Tried to reboot the iPhone, slide the loading message, trying to find on iCloud to deal with it, nothing works. (I does not appear in iCloud.  iCloud doesn't seem to have an Outbox) I also deleted just the video that attempts to download to send email of thugs.

    Any ideas on how to remove this message in my Outbox?

    Despite wha P'tit said below, I now use iOS 9.3.4 on my iPhone, but probably used all the latest version of iOS was in April when I shot the video and tried to send by e-mail.

    I was not yet aware of this problem until recently.

    What email account you are trying to send this with? You can try putting your device in airplane mode, then open your e-mail application, go to the Outbox, and then delete the mail. You can turn off the airplane mode after that. This should clear the error. Worst case, go to settings > Mail, Contacts, calendars and delete e-mail account, and then add it back again. I guarantee you that is a cause for the drainage of the battery prematurely.

    Regarding what iOS you use, if you are referring to the information in the footer of your message box, which is defined in your profile. You can select your profile and edit this information by clicking on your name in the upper-left corner of the page, and then selecting your profile. The information is in the region of the lower there, and you can select the button Modify to the right of the information area you want to change.

Maybe you are looking for