IPhone 6s maintains load, dying, then restart

I downloaded the new update iOS last night 07/26/16. I woke up this morning and my phone is dead, so I loaded. It will show the battery charge on black background for just a few seconds, and then the white screen with the black Apple, then my home screen for less than a second before she dies. Does each charger that I own, and goes through the same cycle when I unplug the unit. I tried now pushed off the button, but at the time that I have the ability to slide to turn off, it dies again. I also tried now hold the home button and lock and nothing seems to work.

These tips will help you to market your iPhone. If your iPhone, iPad or iPod touch won't turn on - Apple Support

Take a look at this article to save your battery http://www.apple.com/batteries/maximizing-performance/

Tags: iPhone

Similar Questions

  • My iPhone freeze with grey screen, then restart only. Subsequently, the Wifi is not available, I have to finish manually restart.

    My iPhone freeze with grey screen, then restart only. Subsequently the Wifi is not available, I have to finish manually restart to be able to use the Wifi. I have restart my internet and network settings, but the problem is still there.

    Hi there Turco911,

    Looks like your screen goes gray and then shuts down its own, and you must manually restart to get the wifi to work again. I save your device in iTunes, then restore it like new and verify that it works.

    How to clear your iOS device and then set up as a new device or restore from backups

    If this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself.

    If when restored like new the problem persists, I would ask for your phone service:

    Repair - iPhone Apple Support

    Thank you for using communities of Apple Support, all the best!

  • Pavillion DV5 starts to load XP, then restarts in a loop

    I withdrew my Pavillion DV5 - 1251NR to act as office and archive hard drive for a long time when the battery is flat and it has stopped working without charger.

    Startup message side that it worked fine but now it just won't start.

    Takes me to the battery message, tells me there is no serial number (had not noticed before), load safe mode options, but the one I choose after starting to load Windows XP, a blue screen flashes and it restarts. Blue screen says something about the withdrawal of antivirus and running checkdisk software but I have no idea how to do these days. There is no option for a DOS command prompt.

    If I walk it right guard this loop throughout the day.

    System information shows serial, UUID, and Prod config ID n all white or 0. (no idea if it will help, seems odd). I ran the test of start-up that passes on each charge (memory, hd, hd smart system). Do not know what is the test of running, but it keeps restarting itself after he finished so it hits the same glitch probably like at boot.

    Don't know, help please. I dropped the external drive that backed up recently and the wedding photos are here

    Hey edwige,.

    Welcome to the HP Support Forums, I have you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I saw your post about the problems with your Pavilion dv5. If it does not start normally and it will not start in safe mode, it is not a lot of things we can do. From what you have posted on the information system showing all 0, it could be a problem with the CMOS or RTC battery, but without being able to load Windows, it will be difficult to say.

    Your best bet is to take it to a technician from the local computer. If he cannot understand the problem they should be able to connect the hard drive to another computer and retrieve the data off of it to record your wedding photos, that is assuming that it is not a problem with the hard drive.

    Thank you

  • Motorcycle G loads and then restarts

    So the problem I have is when I do the following

    • Turn off the Moto G
    • Connect it to the wall charger USB in this case, it's an Apple 5W 1 Amp USB charger
    • Motorcycle G restarts key the screen instead of display a loading screen, but continues to load after restart

    Same thing happens when I turn it off while charging and it happens with another USB wall charger I use

    From what I understand, it depends on the charger - some are not very well protected and it leads to the phone on.

    It is not harming the phone in a sense, well that, so no need to send it for repair or whatever it is.

    See you soon,.

    Nicole

  • Constantly, the computer restarts and shows loading updated 3 or 3 then restart screen.

    Constantly, the computer restarts and shows loading updated 3 or 3 then restart screen.  I've tried corrections on support, but nothing works.  Cannot restore previous point form will not work.  Build 6001 of Windows Vista Home Premium service pack 1.  Last updated who worked at April 15, 2011.  Update that keeps restarting on April 28, 2011.  64-bit operating system.  Intel Core 2 Duo E8500 3.16 GHz.  Antivirus Norton 360 Version 4.3.0.5

    Assuming that Win7 64-bit or Vista 64-bit...

    See this discussion: http://answers.microsoft.com/thread/cac55bf2-e271-e011-8dfc-68b599b31bf5 (which now includes a countless number of threads merged to confuse you more).

  • Windows XP has entered a loop, it stops just before "loading personal settings" then restarts so far again and again.

    Windows XP has entered a loop, it stops just before "loading personal settings" then restarts so far again and again.

    It won't let me choose a mode which worked well, it is stuck on "Start windows normally" for 20 seconds.

    Hello

    Restore the system from the recovery console and check.

  • Can't get my GMail password! Settings > mail > Gmail: press the "re - enter Password' and the window starts to load, but then disappears.

    In my settings > Mail, Contacts, calendar, Notes under accounts is my GMail account which works perfectly well on my iPhone 6 until what I changed my GMail password. Of course, the next time I go to check my GMail emails on my phone (NOTE: I do not use a separate Gmail application) it tells me to update my password in settings.

    When I try to do it, by pressing the blue text "Reset Password", the Gmail window starts to open and then immediately disappears!

    I've been scouring the internet everyday looking for a solution. I tried the phone off (properly) and then restarting him. That did not help. I tried settings > Mail, Contacts, calendar, notes 'Add an account' but when I press 'Google' I have the same thing - the window starts loading, then it disappears.

    Just out of curiosity, I typed as others (iCloud, Exchange, Yahoo, AOL and Outlook) on the list and they all open a screen except for Google and Yahoo, which also starts loading but then disappears immediately. I wonder why it happens that Google and Yahoo? (I don't have a Yahoo email account configured on this phone. Only Gmail and Exchange (for work, that works perfectly, no problems with this one)

    So, when I tried failed to load Google connection/settings window, click on 'Other' on this list, thinking maybe I'll manually add my GMail account again (as a IMAP), but the iPhone doesn't let me do that without also configuring servers of incoming/outgoing mail as if it were a POP configuration? I gave up that idea.

    What I really want, it's simply Reset my password on my phone to my Gmail account in the settings. Does anyone else have this problem? Y at - it a bug known in this regard? Is there a work around for this? I'm doing something wrong? I have to take this phone to an Apple store and get help here?

    SOLVED! I thought about it. As usual, at the point where I have ask for help is when I tell me how to solve. It's simple, really. I was at work, so I guess that the security settings on the wifi of the company prevented me to access these panels (for some odd reason)? I simply turned off the wifi in the settings, and everything works perfectly.

    I hope that if all the world is facing the same question that helps.

  • The last tab, further to the right, does not load when you restart FireFox.

    Whenever I restart firefox, the last tab that I had opened does not load. The issue of restarting can be any: add new installed firefox, new update, restart the browser manually, or restart my computer for firefox automatically closes. It's always the same problem. The last tab appears, as my page, new tab, which is empty. I have 3 tabs open and the first 2 will load fine, but not the last. This means that if I restart for an add-on or something, I need to return to my story to go back the last tab, which is annoying. And it may not have been my most recent tab. I can open this last tab, go back to the tab previous surfing the web on this subject, my story of the building and then restart firefox for some reason any. In these cases, I need to open the history window and dig for the last tab of the memory.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the start safe mode window or make changes.
  • Satellite P100 stops and then restarts

    G ' Day, my laptop starts up fine and then after a while, a few minutes to a few hours, it will instantly die without warning, then restart as if it was a new beginning. There are no errors of seizures.

    I had verified system, wiped the hard drive, changed the HDD and mem, I am runnimg XP pro.
    It is now in the bios ok, but when in windows it will shut down and restart. I don't think that this temp is a problem due to restart at 4 minutes. 3 years running fine, then this.

    Any ideas?

    Neil

    Jin

    You can stop due to overheating. you need to clean:

    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=40

    If you do not have a jet of compressed air, you can use a vacuum cleaner (not the best solution to clean but better than nothing).

  • iPhone 5 shows blue screen and restarts automatically

    iPhone 5 shows blue screen and restarts automatically

    1. try to do a reset by pressing home and off/power button together until you see the Apple logo, then release

    2. If you can't do it you may need to restore the phone via iTunes

    (1079)

  • Help the sims2 double deluxe loading and then freeze it!

    Recently I bought sims3 that plays very well, so I decided to get the sims2 double deluxe it will load but then freezes and the screen black, then tell does not.  I have Windows vista and the back of the box, it is said that it is running in windows vista.  Help, please.  I read one of the solutions was to delete your temporary files.  I'm not a computer person, so I'm afraid to remove or change anything.  I've updated drivers, changed to admin user and it compatible to windows xp pack 2.  HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Hello

    Welcome to Windows Vista community responses.

    What are the minimum requirements required by the game.

    Windows Vista, XP, Me, 2000, or 98

    1.0 GHz or faster processor

    256 MB or more RAM (512 MB required for Windows Vista or running with several expansion packs installed)

    At least 5.5 GB of free space on the hard disk

    DirectX 9 compatible .0c map video with 32 MB or more memory (64 MB for Windows Vista) and one able to t & following chipsets: ATI Radeon 8500 or greater (9600 or greater required for Vista); NVIDIA GeForce 2GTS or more (GeForce 6200 or greater required for Vista)

    Card compatible DirectX 9 .0c.

    Make sure you have the graphics card that meets the above requirement.

    Uninstall and reinstall the updated drivers for your graphics card from the computer manufacturer's website or graphics card manufacturer's Web site.

    Uninstall the game and reinstall it back and check if you still face the same problem.

    Put your computer in a clean boot the game game and check if you are still having the same problem.

    To perform a clean boot on a computer that is running Windows Vista, follow these steps.

    1. click on start, type msconfig in the search box and press ENTER.

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after starting the computer, reinstall and run the program and see if the problem is resolved.

    Search for previous issues. If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

    http://support.microsoft.com/kb/331796 .

    To restore your computer to a Normal startup mode, follow these steps.

    1. click on start in the box start the search.

    2. type msconfig and press ENTER.

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    3. click on the general tab.

    4. click on Normal Startup - load all device drivers and services and then click OK.

    5. When you are prompted, click on restart to restart the computer

    I suggest also that contact the publishers of games for patches and updates on the game.

    Please let us know if you need additional assistance.

    Kind regards
    Anthony
    Microsoft technical support
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Computer laptop is slow loading programs, then I have error message

    Original title: LAPTOP IS SLOW LOADING PROGRAMS, THEN I GET AN ERROR MESSAGE.

    My laptop Windows XP is loading slowly & I get an error message when you click the icons.  Error message: the instruction at 0xffbadd11 referenced memory at 0xffbadd11. The memory could not be "written", click ok to complete the program. I turn off the clean boot windows, and you can click to open the remaining programs quickly, but not in a 'normal' State of windows. What can I do else?

    One of your startup items is badly behave.  You can isolate that through a process of elimination.  Do a clean boot, and then add the items one by one and restart.  When it slows down you found.

    We could be more useful if you gave us your system specs and the specific error message.

  • When I connect my usb modem to my pc and it is held automatically loading my pc restarts

    When I connect my usb modem to my pc and it is held automatically loading my pc restarts

    Hello

    Please check the USB modem to a different USB port or another system.

    If it works fine in another port or another system, it may be the problem with USB port.
    If you face the same problem. then the problem is with a USB modem,
    Please check with the manufacturer of your USB modem.
    Kind regards
    Chauvet J.

  • Windows XP Clean install... copies the files and then restarts... Never installed!

    I've recently updated some hardware in my PC, a new Gigabyte motherboard and an AMD Dual Core processor. Here are the specifications of what Im running:
    The rest is all pretty basic stuff... fans, etc heat sinks. It's pretty much a budget box, so there is nothing too special about it. I thought that I restart it come and go, but the process of starting always led me through the boot of MB, then to "loading of the operating system", then restart everything again.
    I did the walk through for clean install of Windows XP and everything goes well until it comes time for the operating system to install.
    1. Boot from CD
    2. Setup Windows XP now
    3. Delete the existing partition
    4. Create the new partition
    5. Choose the location and format of partition
    6. Copy the files in Windows XP
    The copy goes by fine... but after that is where the problem starts. Instead of going to Windows Installer, it will restart the PC.  After the reboot, it goes through the whole process that I mentioned at the beginning of this problem.
    What I am doing wrong?

    Hello

    Once the files are copied when the computer restarts automatically do not press any key to boot from the CD again and let the computer automatically launch the next step. Also remove any external devices attached outside keyboard and mouse.

    I hope hear from you soon!

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • XP start screen flashes then restarts the computer (usually start in any mode, restarts just instantly)

    Hello

    My xp computer has stopped working completely for some unknown reason. Last Friday I took my girls login Thinkpoint virus successfully. Nobody is using the computer since then when my daughter connected today it froze after a bit of use. It restarted, and now it won't start at all. It shows the BIOS loading but then flashes the screen and loading XP restarts. If I try to reboot safe mode or use the last known good config that the computer still does not start XP.

    I already did the following:

    Check disk

    Bootcfg/Repair

    System recovery (the one where you will install a new XP (with OS CD started from) but hitting R instead)

    I am at a loss about what to do in addition to do a format/reinstall. There is no document import on this computer, but it would be better to do not reinstall.

    P.S. It's a Dell Precision 390. And he has a strange video card, DVI dual nVidia Quadro NVS 285. Ive never seen anything else like before.

    Thank you

    Hello

    (a) you can follow this link to perform a manual system restore & verify if you are able to start correctly on the desktop.

    How do I recover from a corrupted registry that prevents Windows XP startup

    (b) If you are able to boot to the desktop, you can run virus scan anonline again from the link below. If you have antivirus software installed on your computer, please install the latest update of the software to make it work properly.

    http://OneCare.live.com/site/en-NZ/default.htm?mkt=en-NZ

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for