iPhone 6 Plus says Searching / no service

Hello

I have a problem with my iPhone 6, it is said to the search or no service when I have a working SIM card in the phone and I tried several SIM cards and it says the same thing. I also understood that when I toggle mode plane 7 times then the service back for 2 minutes and then it stops working. I tried to reset network and reset the phone settings I also went to Ubreakifix and the guy told me I should take on Apple and they should replace the phone.

is that what I can do to make it work again?

Try the help in the support article > If you see no Service or research

Tags: iPhone

Similar Questions

  • What is the problem with my iphone? He says still no service but my sim card works with other phones, after a reboot it says searching until I have to remove and reinsert the sim ive done all what is the factory reset to open the phone to verify any damag

    IPhone 6 64 gb

    iOS 9.2.1

    The phone says no service but the SIM card works, everything in the phone works except the flash still lights up and flickers sometimes before becoming stable but who don't mind not 'that' much, ive tried factory reset and everything, ive also open the unit and looked for signs of damage, the phone knows there is a SIM card in the phone , but he never says the name of the carrier, also after the restart he said looking and does not stop until I have remove and reinsert the SIM card.

    You can restore the factory state after an iTunes backup

    If this does not resolve the problem then you may want to align on Apple or an approved repair shop

  • my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

    my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

    Hi rog247,

    Thanks for posting here in Support of Apple communities! After reading your post, I see that your iPhone 4S shows 'No Service'. It is certainly important to have access to mobile data; I would like to help get this sorted out.

    Please follow the instructions here:

    If you see no Service or research

    If you see no Service or search on your device, or cannot connect to a cellular network or cellular data, follow these steps:

    1. Check your coverage area to ensure that you are in an area with a cellular network coverage.
      • If you cannot connect to a cellular network on your iPhone, make sure that the cell data is on in settings > cellular*. On your iPad, go to settings > cellular data.
      • If you travel internationally, make sure that your device is set up for data roaming. Go to settings > cellular > data roaming.
    2. Restart your iPhone or iPad.
    3. Looking for a carrier settings update.
    4. Update your iPhone or iPad to the latest version of iOS.
    5. Remove the SIM card and put it again. If the SIM card is damaged, or does not fit in the drawer of the SIM card, contact your carrier.
    6. Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.
    7. If you have another device, see if you can connect your business with her network to this place.
    8. Contact your operator for:
      • Make sure your account is active and in good and due form.
      • Make sure that there are no failures in your area.
      • Verify that your device is not blocked to receive cellular services and is set up with the right data plan.

    If you still cannot connect to a cellular network and have confirmed with your carrier is not a problem with your account, or your network, try to restore your device.

    If you cannot connect to a cellular network or cellular data - Apple Support

    See you soon!

  • iPhone 4 continues the search for carrier

    Recently, I set my iPhone 4. And the iPhone keeps searching for service or signal or what they called it. I tried just like update my carrier setting, reset the network settings, turn on and outside airplane mode and even restore the phone. The most funny thing is always successfully can I activate my phone without going through signals. It certainly isn't because of the sim card because it works for my 5s. Any help?

    The 4 and the 5 s using different size SIM cards physically. You cannot use the nano-SIM of a 5 by 4, which uses a micro-SIM card.

    Also, what did you recently to "fix" your iPhone 4?

  • iPhone 6 Plus warranty

    I've owned my iPhone 6 Plus since a few months and a week or two ago I noticed when I was replacing my case that my iPhone is slightly bent near the power button. This disn can't cause any screen problems so I never noticed however scrutinize every time the screen is black around the area that is folded the edges of the screen seem to shine more white than other regions... However, before that I also found that a purple mark appears on my screen when there is a dark background, it is perhaps pasted pixela I was wondering if this is covered by the warranty and if I take my phone to the Apple Store that they may be able to replace or fix it?

    Thank you

    You will need an Apple Genius visually inspect the iPhone.

    There is no way of knowing if this is covered unless it is inspected. If they "accidental damage" so it will not be repaired.

    If there is a defect in the phone, as with some other iPhone 6 Plus' which are folded, then Apple will take care of you with your 1 year warranty on hardware.

    You have AppleCare, accidental damage are covered with a service fee if the repair can be done at full cost. Don't know what that it cost will be, so it's best to have someone physically look at the device.

    Good luck

  • How can I enter letters enter a response to IVR on iPhone 6 Plus

    Hello

    I have iPhone 6 Plus with iOS 9.1. Today morning, I called a Bank and the interactive voice recorder wanted me to enter my ID number (say that my ID is P3245123G

    I gave up because I couldn't find a way to get into the letters. Can someone help me please you know how to use the keypad to enter this alphanumeric code?

    What I tried, wasting several calls.

    1. double click on the key 7 in the hope that P would come to the top, but I got was 77

    2. long-lasting 7 only 7 came

    3. press on * followed by a 7 followed by a 1 - * 71 came.

    Why things can't be more simple and explicit? Like say providing a button to change between the numbers & letters?

    There is no way to enter a letter from any telephone keyboard (iPhone or fixed phone) and do display. Generally, if the letter is to affix you enter the number corresponding to its place (7 p) and 7 displays. If this does not work with your bank, please contact them. Some have different methods, such as the letter to jump, but they normally give instructions for something like this in their registration.

  • Adobe Clip project not sync between my iPhone 6 Plus and my iPad Pro

    I have prepared a short project Adobe Clip on my iPhone 6s longer.  He played back well on the iPhone 6 Plus.  I then went to my iPad Pro, open Adobe Clip and expected from this project appears in Adobe video on iPad Pro.  It didn't, and after hours leave Xenon Adobe Clip the iPad Pro (not only running in the background), I see a synchronization icon (rotation).  When I click on this icon, it says "download media...". 100%.  No matter how long I leave Adobe Clip open on iPad Pro, I still see the rotating synchronization icon and never see the project appear in Adobe video on iPad Pro.  I have an active account of creative cloud.  My old projects don't appear on the RPI Pro in clip Adobe just this last project.  Anyone have any suggestions to solve this problem of synchronization, the Clip from Adobe is to have between these two devices?

    Thank you in advance for answering.

    Tom

    Hi Tom,

    Sorry for the trouble.

    Can you confirm your using the latest version of the (2.0.2) Clip?

    Here are a few things to try. Please let us know if any of these options helped or not.

    1. launch first music video on the iPad Pro and make sure it is not open on other devices. Let the synchronization of the device completely before background processing application or opening/reading projects.

    2 log on to the account current CC, close the clamp and restart and reconnect. Once again, making sure to leave all projects to download.

    3 remove the Clip on the iPad Pro, then re - install and login to leave remaining projects sync.

    Hope one of these tips to solve your problem. If this isn't the case, we can go down a different road.

    Thank you

    Peter Garaway

  • Verizon computed using data differently than the iPhone 6 Plus

    Verizon seems to count on me by using more data than my iPhone 6 more fact.

    My iPhone was at 1.8 GB, Verizon already had 2 GB, my iPHone was at 2.7 Gb, Verizon has already shown/3 Gb.

    Nobody noticed this discrepancy?

    I called Verizon tech support and they told me that the iPhone sends data to Apple that does not appear in my iPhone 6 Plus' data counter.

    I did the test and for the first two days in the next legislature do not use it for any cellular - WiFi only (and use mobile phone data to support the poor wifi was disabled): he showed 397KO for two days - my iPhone with Apple communication seems to be this.

    Thus, it seems that Verizon recorded a higher than my iPHone data use, and any communication from my iPhone with Apple is not the cause.

    Your opinion?

    Ocean 17A writes:

    Verizon seems to count on me by using more data than my iPhone 6 more fact.

    My iPhone was at 1.8 GB, Verizon already had 2 GB, my iPHone was at 2.7 Gb, Verizon has already shown/3 Gb.

    Nobody noticed this discrepancy?

    I called Verizon tech support and they told me that the iPhone sends data to Apple that does not appear in my iPhone 6 Plus' data counter.

    I did the test and for the first two days in the next legislature do not use it for any cellular - WiFi only (and use mobile phone data to support the poor wifi was disabled): he showed 397KO for two days - my iPhone with Apple communication seems to be this.

    Thus, it seems that Verizon recorded a higher than my iPHone data use, and any communication from my iPhone with Apple is not the cause.

    Your opinion?

    Everything you said Verizon is false. The iPhone saves all data sent over the cellular network. There are some data types that will always pass by cell phone:

    • Visual Voicemail
    • MMS messages
    • Push email notifications
    • All data that is transferred when the phone is asleep and not trendy, WiFi is disabled when the phone is in sleep mode to save battery

    Verizon numbers and phone numbers may be different for an entirely different reason. Records of phone as sent or received data, but do not count data that fails to send and which must be retransmitted. Verizon has this data. This happens usually if you have a very low cell signal.

    My experience with AT & T, is that their number and phone match almost exactly.

  • Can I use the original iPad Air 2 charger to charge my iPhone 6 Plus? It shortens the life of the battery of the phone?

    Can I use the original iPad Air 2 charger to charge my iPhone 6 Plus? It shortens the life of the battery of the phone?

    Yes, you can. No, it won't. Apple sells this as compatible with the iPad and iPhone adapter.

    And the phone does a little faster than with the phone adapter.

  • I just replaced my battery and it says 'battery of Service '? The battery is new. I need to reset something?

    I just replaced my battery and it says 'battery of Service '? The battery is new. I need to reset something?

    Try resetting the SMC http://support.apple.com/kb/ht3964

  • Impossible to download and update the app on the iPhone 6 Plus

    Topic: impossible to download and update the app on my iPhone 6 Plus

    Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

    In addition, you can try to reset your settings.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

  • Flickering screen and unresponsive on an iPhone 6 Plus

    Flickering and on which the screen on an iPhone 6 Plus: any fix known in addition to getting a new phone?

    Is your new IPhone?

    Try to force restart your IPhone via the home button and sleep/wake.

    If this does not work, try to restore your IPhone Via Itunes

  • iPhone 6 Plus kill local Wi - Fi

    For many months now, any time my phone is 'asleep' and plugged into a power supply at home, 3 to 5 minutes later; all the other internet connectivity on al, other devices dies. 0.0mbbs. disable Wi - Fi on my iPhone, or unplug it, will instantly restore connectivity to all devices. Just to wake up the phone will sometimes restore connectivity with other devices. Over the months, I found several people who describe similar situations, such as:Re: hook up 6 more with iOS 9.2 in any charger turns off the home Wifimy problem is not specific to iOS 9.2, as I am currently on 9.3.2.  Because there is a delay when I plug in my phone when the Wi - Fi takes, it took me several months to put the two together.  I had the phone for about a year and a half, and I know that he has not always done this.

    This discovery of connection in the incident prompting fortunately also led to one explanation of the other strange behavior. Like why my iPad will not be updated or backup from one day to the next, or why the emails come through on all my devices. In general, because I leave my phone on all night, I don't actually no link on any of my other devices updates and synchronization of accounts etc.

    The WAP is an airport extreme (ac) as well as two airport expresses as Extenders to obtain coverage on the edge of my yard, very skinny, very deep.  I tried:

    • update the software on all access points
    • reset all access points
    • Restore the access points to a new SSID and password default
    • Regardless of whether or not the phone is freshly restarted
    • regardless of whether its access point is enabled or not
    • "Wi - Fi assist" has never been on

    Interestingly, when Internet connectivity is blocked to the top, I can still see and control the access points through the most convenient airport on my iPad app. It is particularly slow but in response.  No network conflict is reported.

    I got used to leave my iPhone Wi - Fi off when I'm at home, which has obvious disadvantages. This seems to be a bug in more common than just my particular network put in place...   Anyone out there have ideas, resources for trying or is it just a bad batch of Wi - Fi chips that took a few months to go wrong?  I feel that this problem is much more common that the messages on the forums would have you believe, but it takes some troubleshooting to find out what exactly the problem beyond the capabilities or the patience of the average consumer.

    One thing that you seem to have not tried the reset of your iPhone to factory default.

    What I would do is the iPhone using iCloud, or even better backup, iTunes on Mac or PC and then reset the default iPhone. Then, before installing apps check and see if the behavior of killing of Wi - Fi is always present.

    If it is you know it is something inherent in the iPhone 6 Plus running the current software and you can restore it from your backup and expect that Apple to deliver a software fix for the problem or see if Apple will exchange the iPhone for those who do not show this behavior.

    If it isn't, then you know that one of the applications is the origin of the problem. In this case, you will need to install your applications at the time and a test for the behavior of killing of Wi - Fi to determine what app is causing the problem.

  • How to fix iPhone 6 Plus that has had water damage.

    How to fix iPhone 6 Plus that has had water damage.

    By Apple

    If you have Applecare and have identical one lives left, a replacement iPhone franchise according to your country

    If not, the price of a new iPhone, there is no repair for a water damaged phone

  • I recently bought the iphone 6 s its shows no service on top which is the solution that he

    I bought the iphone 6s recently it shows no service on top... What is the solution for it

    Troubleshooting of user is:

    1.restart, that is, power off / on,.

    2 reset http://support.apple.com/kb/HT1430,

    3. restore the backup, restore as a new device. http://support.Apple.com/kb/HT1414

Maybe you are looking for

  • Music on Ipad on Japanese...

    Hello I was looking for an artist on Imusic and I think I change my country store... Now on my iPad, not on my iPhone and not on my iMac, music and iTunes store are... the Japanese or Chinese... How can I return french in Belgium? Thank you

  • How to cancel a request to share documents with my other PC at home?

    Try to reinstall my printer or make it work again wireless, I have asked to share documents with other computers on my home network, but I don't want to do that. Included in the PC are: an old Compaq desktop, a HP Pavilion zv5000 and a MacBook Pro la

  • WLM file associations associations of system

    I am running Win XP and Office WLM. I have Office 2003 is installed and all file associations are defined to use Office 2003. If I open a .doc from a folder, it opens in Word 2003 without problem. I installed a trial of Office 2010, to try it. This h

  • I need a solution for the issue mentioned with my Audio below

    Product Windows Audio Problem Stopped working Date 13/04/2013 11:29 Status Report sent Signature of the problem Problem event name: APPCRASH Application name: svchost.exe_Audiosrv Application version: 6.0.6001.18000 Application timestamp: 47918b 89 F

  • Why my dvd drive optiarc does not read DVDs but reads cds

    one day my optiarc dvd drive just stopped reading DVDs. It will read DVD if I install linux but I do not like linux, so how can I get running again? It seemed to stop working after an update. I have the device sony optiarc dvd rw ad - 7203a ata