iPhone 6 s screen Passcode problem

Similar Questions

• My iPhone 5 c screen jumped in the upper right.

  My iPhone 5 c screen jumped in the upper right. I didn't give up and he was in a protective case LifeProof. What should I do? Apple will fix it if it's a defect?

  sounds like it's battery problem growing they will repair it under warranty if you still have the warranty of the cause

  If not, they will charge you

• my iphone 5 s screen is not turn on

  my iphone 5 s screen has suddenly exploded and no lights to the top... but the phone works as it sounds when I make a call on my phone from my other phone

  any help

  Have you tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You lose no data by doing this.

  If this does not work, the problem might be hardware related, and the phone must be service by Apple or an Apple authorized service provider.

  Apple iPhone - contact Support - support

• iPhone 6 more screen flashing and does not

  Hello

  For the last few days, my iphone 6 more screen starts flashing from the top and the touch screen doesn't respond. The phone is still under warranty.

  I went to apply here authorized service center in Singapore, they have looked at my phone and said, there is a slight inclination in the phone which will be considered physical damage where it can not be repaired / replaced under warranty, I have to bear the cost.

  Now, as I read on the forums, this is a problem of very well known with the iPhone 6 Plus, also, I don't see no noticeable turn in the phone of my eyes. I'm sure that this issue is not because of any physical damage, but as a result of an internal manufacturing.

  I'm really disappointed with the service of Apple. I don't know what to do now. Should I try to go to any other authorized service center and see what they say?

  Any advice would be appreciated,

  Thank you

  Rohit

  I started having the same problem with my Plus 6. I took it to the Apple store today and the tech told me that it is a known issue that they see a lot. They hope that Apple will issue a recall notice. My phone is out of warranty, so they would be out swap with a unit refurbished for $329. The real kicker is that he said that they have the same problem with a lot of devices refurbished right out of the box. My options are to keep a phone that keeps flashing and does not or pay $329 for a replacement who may have the same problem that has my current phone. It's really bad assumption of a product!

• iPhone 5 s screen sometimes does not respond to touch

  I bought for almost a month, there is however a problem annoying me lately.

  As a first step, the screen did not touch once per day.

  A few days later, this problem happened all too often that I just couldn't ignore it more.

  Fortunately, I found the way to resolve is to turn off the screen and then turn it on (not reboot the phone), so the screen can work again.

  Just as I was about to return to drag it to the screen, the problem of the screen does not appeared immediately, and that just happened to me when you type these words... so I could only repeat these steps once more. I must say that is rarely the case, most of the time, I only need to do this once.

  I would like to ask if anyone knows how to fix this bug (maybe?) completely

  Thank you and sorry for my bad English ^ ^ |

  To make sure that it is not software related, set it back to factory settings, without using any data backup later. Set up the rest of the personal settings manually and test the screen.

  If the screen is working again, restore the last backup. If the problem returns, the data backup contains damaged data, causing your issues.

  If it still does not respond, it is a hardware problem and the phone must be repaired by Apple or an Apple authorized Service Provider:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support

• Update Verizon iPhone 5 new IOS 10 problem: cannot receive/send calls. Shop Verizon says it's an update causing Apple to popular phones to crash all day. Any input or advice, please?

  Update Verizon iPhone 5 new IOS 10 problem: I can't receive/send calls. The store Verizon says it's phones a popular causing update Apple crash all day. Any input or advice, please?

  Don't you say no service at the top?

• my iphone 5 s screen does not work.

  my iphone 5 s screen does not work. Touch is responsive but display sows a lines vertical coloring...

  TNX for help

  Hello

  I suggest you contact Apple Support (mail service may be available) or make a Genius Bar reservation to have your iPhone verified and, if recommended by Apple, served (either under warranty or through paid repairs):

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

  To check your warranty status:

  • https://checkcoverage.Apple.com/

• Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"in any way I can remove my visa card from iTunes

  Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"anyway I can remove my visa card from iTunes?

  You must pay your debt first.

• My iphone 6 s screen has totally blacked out, but siri works. What is its cause?

  My iphone 6 s screen has totally blacked out, but siri works.  What is its cause?

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• my iphone 5 c screen stops working when I remove the case

  my iphone 5 c screen stops working when I remove the case

  Delete this case? Please explain what you ask a little more clear.

• How to lock my iPhone 6's screen so it does not move between portrait and landscape?

  How to lock my iPhone 6's screen so it does not move between portrait and landscape?

  Select portrait orientation lock.

  Swipe the top of your home screen to access the control center and select the icon with a lock and an arc around him.

• Satellite C70 - A - 16 L - screen resolution problem

  Hello

  I recently had a screen resolution problem with my laptop (C70 - A - 16 L).
  The max screen resolution which is imparted to me is 1366 x 768, whereas before I think he used 1600 x 900.

  I tried the latest drivers, Bios, etc. and have also restored the operating system to a previous backup, as well as a new installation.
  I also tried to roll back to Windows 7 (with proper drivers). They all offer the same problem.

  This new maximum resolution display correctly - as if the LCD does not deal with the timings of 1366 x 768.
  I believe that the Panel is OK and the problem he reports the EDID information properly - to force windows to use the new resolution.

  Is there a download monitor.inf file that can be used to bypass the EDID reported by the Panel?

  Kind regards

  Antwist.

  If the right to display drver is usually installed everything should be OK.
  Have you installed Intel driver Toshiba download page 9.17.10.3062 version?

• iPhone dialer "on-screen keyboard" shows random contact numbers

  iPhone dialer "on-screen keyboard" shows the numbers of random contact opening right out of the app. And these contacts are probably people that I have not contacted them in recent months. I tried to restart [soft/hard] phone, of no use.

  Hi smartkidAPN,

  If you want to clean the recent calls on your iPhone, you can type recent, tap on edit and delete individual contacts or tap Clear to delete all contacts from your list of recent.

  iPhone user Guide - make a call

  Return a recent call. Tap recent, then press call. Press on to get more info on the call, or if the appellant. A red badge shows the number of missed calls.

  You can also reach Favorites and recent people you have been in contact with the multitask screen - just double-click the Home button.

  Dial manually. Type on the keyboard, enter the number, then press to call.

  • Stick a number on the keyboard: Tap on the screen above the keyboard, and then click Paste.

  Happy new year!

• Is the option to display medical ID + ICE information available on my Iphone 5 lock screen

  Is the option to display medical ID + ICE information available on my Iphone 5 lock screen

  See this support document on health which contains a section on the creation of an ID of emergency medicine, containing things you're talking about. Use on your iPhone or iPod touch - Apple Support health

• Screen touch problems when you use the converter

  We just bought an Envy 27 tilt to our Caravan for all the good characteristics that HP has and TV

  Cause sometimes will want to run the HP converter 12v 400 watt true sine wave.

  We tried this to find a problem, the computer functioned well but the touchscreen ran a muck and did not work as usual.

  So after much googling and some reading I'd like here to answer fo HP.

  As I can't believe, I'd be the first to come on this problem and want to put it all in one in a motor home.

  What I read, it could be a matter of dirty power of the inveter, but we thought we have purchase the best brand true sine wave, we could leave our guys of battery here in Australia.

  Any advice would be received with gratitude.

  Thanks Lou, first of all for your time and on the other hand for your thoughts and advice.

  We have it finally working outside a performance of the inverter with number.

  But I have to say without any worthy of official telephone hotline support of HP.

  Lou, I'm working through several of your suggestions, pending the official response to my survey on what brand or type of UPS or UPS I should use with my desire to tilt.

  Well, it is very sad that a massive company like HP with what you would think would be a very large R & D service, cannot answer a simple question, like what type of UPS or UPS if they recommend to work with the touchscreen of the tilt.

  The poor people, I was talking to, had no idea what I was talking about, or what I was trying to do. How a computer call center peason knows not what a UPS, I can understand on an inverter, but the tech people, these are things really very similar in the different boxes.

  OK, if you have this problem with your inverter and touch screen, first of all not all inverters are equal even in the same brand that I discovered. I want to thank my provider inverter & battery for their time and for allowing me to put in place the HP Envy of tilt on the back of their store and try different UPSs, inverters and batteries.

  I'll talk about brands here, not rat on the brand, but as it may be useful to someone else in Australia in the future. It seems that my "Epower DCAC 400w 12v true sine inverter" wasn't at the height when it came to clean AC power required to operate the touch screen without problem.

  In the end, we tried a "Epower DCAC 1000w true Sine Wave 12v', really just to give it a go, thinking it would be a better to be the same brand as the unit of 400w, well it worked quite OK

  This unit of true sine wave Epower 12 v 1000w, fixed our problem with touchscreen and ran HP Envy tilt as if it is running on AC power.

  If anyone is interested for camper here, I found this configuration to draw between 4 and 5 amperes of batteries of 12v and about 41 Watts @ runing 240 volts a you tube clip.

  Well it is my experiences and the final result, I hope this helps someone else in the future, I'm sure that HP will not be able to.

  Thank you all.