Similar Questions

• How to retrieve info from my i5c if the screen does not work and the warranty has expired?

  My iphone 5 c screen does not work and my warranty has expired there is 138days. I visited my carrier (AT & T) and contacted the Apple support.

  I want just the information of contact at least if nothing else my phone. What can I do?

  Have you tried to backup with iTunes on your computer?

  Are you also the timing or the iCloud backup device?

• My touch screen does not work.

  My touch screen does not work. Sometimes, and other times I have to reboot. I restored my phone, but it still has the same problem. Any suggestions?

  The following information is taken from the HT201406 of the Apple KB article:

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  If your touch screen responds slowly, inconsistently, or not responding at all, follow these steps.

  Check your touch screen

  Make sure your hands are clean and dry, then try the following steps:

  1. If you have a case or a protective screen on your device, try removing it.
  2. Clean the screen with a soft, slightly damp, lint cloth.
  3. Unplug your unit.
  4. Restart your device. If you are unable to restart it, you can force restart your device.

  If your touch screen is still unresponsive as it should, contact the Support technique Apple or make your tablet in an Apple Store or Apple authorized service provider.

  Adjust your settings for tactile 3D

  If you have an iPhone 6s or later that does not properly respond to tactile 3D press, you can adjust the settings:

  1. Go to settings > general.
  2. Click Accessibility > Touch 3D.
  3. Then set the sensitivity of the setting.

  Get more help

  • Find out what to do if your screen does not turn.
  • If your screen is cracked or broken, implemented the repair service for your iPhone or iPad.

• As I installed the latest OS 10.0.1 on my iPhone, the Pandora app does not work.

  As I installed the latest OS 10.0.1 on my iPhone, the Pandora app does not work.

  Have you installed the latest update of Pandora (version 7.6), posted on September 13, 2016?

• Qosmio DX730 and Win8 - touch screen does not work

  Hello

  My wife's parents bought a Toshiba Qosmio DX730 (model PQQ11A). They have recently upgraded to Windows 8 and the touch screen does not work now.

  The problem is lack of drivers (the monitor driver reports as a generic PnP monitor).

  I have went on the Toshiba site and selected downloads driver for the appropriate model and installed a number of drivers, including recommended NVidia display drivers. There is no drivers on the site that seem to install support for Toshiba touchscreen.

  Are there no drivers available for this model Windows 8? If not, is there another solution? If Yes, where can I find them. Any help very appreciated because they have nice and bought computer Windows 8 so they could use the touch functions.

  Thank you.

  Hello

  On the page of the Toshiba UE driver you can find drivers for Win 8.
  As far as I know that you will install the Toshiba display driver for the touch function works correctly.

  I found this driver.
  Please check if you can install this:
  [Win 8 TouchScreen software for Qosmio DX730 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 381 & selSeries = 366 & selProduct = 7338 & salt ShortMod = null & language = 13 & selOS = 40 & selType = all & rupload = Yes & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 83418 & O SID =-1 & driverLanguage = 42]

• Screen does not work on Satellite L775-10F

  I turn on the computer and the screen does not work. Everything seems fine but the screen is all black.

  Nothings happening. I tried turning market and its still does not.
  I also tried to connect to my TV with an hdmi cable.

  What should I do?

  Connect it to the TV and wait until Windows 7 is fully loaded (you will hear sound Win) than trying to use FN + F5 several times. It may happen on the TV Office. Be sure you use the right settings on the TV (HDMI port must be enabled on the right).

  F nothing helps I presume the display can be defective then contact the closest service Toshiba and let them check your laptop.

• ASUS laptop computer: touch screen does not work after update of windows 10

  My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

  Hello

  Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

  Kind regards.

• Still 2 WT10 - touch screen does not work

  Sometimes the touch screen does not work or malfunctioning, as does replacing the system and continues. When it crashes I have to suspend the Tablet and wait a bit, sometimes I have to play several times to select what I want. Anyone know what it could be?

  Have a Toshiba Encore 2 WT10

  You said; you have already changed the system.
  What did you change? The ENCORE 2 WT10-A-102 was pre-installed with Win OS 8.1.

  Also, I guess the problem described is related to busy BONE.
  Probably too many applications (apps) as well as the process running in the background and this could lead to short a few drop-outs or performance problems.

• How do synchronize you a phone if the screen does not work?

  How do synchronize you a phone if the screen does not work?

  Rstansbury wrote:

  How do synchronize you a phone if the screen does not work?

  You need solve the problem first otherwise you do not have.

• Satellite L300 - 1-5 - the screen does not work

  Recently, I encountered a problem with my laptop, the screen does not work.
  I tested my inverter of the screen and my backlight lamp to see that if that was the problem, but they both worked perfectly, I then tried the entire screen with the parts and that worked too. (I tried in my friends Toshiba Satellite L300 - 217)

  Then I looked around online and got told to try to connect my laptop to an external monitor, so I did and the screen didn't work there either. So now I'm stuck, I have tried everything even made sure all connections aren't loose etc but it still does not.

  Anyone know what the problem with my laptop?

  Thank you, Tom

  Hey Buddy,

  > connect my laptop to an external monitor, so I did and the screen didn't work there either.
  This means that the internal monitor is ok and the reason must be the graphics card or card mother herself.

  I guess for now, you get only a screen empty and nothing happens on your laptop?

  In this case, you should contact the closest service provider authorized in your country. Just get in touch with the guys and ask for help. They can check the cell phone and fix it! ;)

• After upgrading RAM, the screen does not work on Satellite L30 - 105

  Dial up on laptop and screen does not work. Have updated the memory to 2 GB.
  This can be the reason of the screen works not? Have tried rebooting the system, but it helps t n.

  Hello

  Can you please tell us which laptop model you have? Have you noticed the same problem until you do RAM upgrade?
  What's on the new RAM? Did you buy a compatible?

• Model is SVF15215SNB Touch screen does not work - no. Pen or touch input is available

  My computer model is SVF15215SNB Touch screen does not work and it says no. Pen or touch input is available for this view kindly let me know the solution to address the issue

  Hello!

  It seems that the model number you provided is not a model for us.

  This Forum is for help and support for the products of Sony us.

  For assistance, please contact Sony support team in your area for the best support!

  Thank you!

  Sorry for the inconvenience!

  http://www.Sony-Asia.com/countryselector.html?HPID=countryselector:AsiaPacific

• Satellite A60-122: screen does not work - rest black

  Hello!!

  Can someone help me please on a screen problem? I have a Toshiba Satellite A60-122 and when I turn it on the screen does not work. It remains black as if the power of the laptop was turned off. I tried to connect the laptop to an external monitor, but it still does not work. I have no more ideas of what can do to make it work.

  I already told to format the pc with the cd of restoration but without an image, it is impossible to do anything...
  Thank you

  Isabel

  Hello Isabel

  I'm not an expert, but if there is no image on LCD internal display and the external monitor, I assume that there is a problem with the graphics card. I think you should contact the customer Service of your country partner and let check the device.

  I also hope that the warranty is still valid and if something needs to be replaced they will do it for free.

  Bye and let us know if you have more information about it.

• Screen does not work on my Satellite L500

  My Satellite L500 screen does not work. I can connect the laptop to a monitor and use ok but the screen of the laptop remains blank.

  I did something to cause this?

  I don t think so.
  If you cannot switch back to the display of s for laptop using FN + F5 I m afraid there is a hardware problem.

  The problem with the display cable or show itself. Is the laptop must be disassembled and all this needs to be checked.
  You can contact Toshiba service nearest and ask for help.

• wired keyboard 600 print screen does not work

  System

  Windows XP Professional 32-bit version 2002 Service Pack 3

  Dell Vostro 400

  Intel Core 2 Duo E4500 2.19 Ghz, 3.00 GB Ram

  Since I replaced the original keyboard with Microsoft wired keyboard 600 print screen functions are sporadic at best.  Sometimes Ctrl + PRTSCN works and especially it's not.  Even when Ctrl + print screen does not work I can not copy the active window by using Alt + PRTSCN.   I have a Setup dual monitor at work so that I can have the database, file explorere and opened in a window screen and development in another email.  I tried to download the driver from the Microsoft Web site, but he says that drivers that are installed are later.  (installed on the disc that came with the keyboard)

  Other than to start Microsoft keyboard anyone elese have all the solutions to make it work?

  Hello

  Follow these methods.

  Method 1: Follow these steps to run the keyboard Diagnostics

  (a) start Microsoft Keyboard Diagnostics. To do this,
  Click Start, click run, type mskey in the Open box, and then click OK.

  (b) press several keys to verify that the keys match the keys identified in the MS Key window.

  (c) when you are finished, click exit.

  If you get no response in MS Key on your keyboard, test the keyboard on another computer

  Method 2: You can also use the on-screen keyboard and check if you are able to take screenshot.
  For more information, see this link.
  http://Windows.Microsoft.com/en-us/Windows-XP/Help/on-screen-keyboard    

  If the methods above do not help, you can contact the Microsoft Hardware support.
  How to contact Microsoft if you have questions about your hardware device
  http://www.Microsoft.com/hardware/en-us/support/contact-us