iPhone 6s battery was terrible in the last month?

My iPhone 6 s the battery was amazing, since I got last September, it was to last all day. I used to load at 07:00 and remove it for free at about 08:00 every morning and it would normally be 100%, I would use 3 g, music, apps all day and from 16:00, it's only 50-70%. Sometimes the battery would not yet go down when I listened to the music. But in the last month, he got about as bad as my battery of iPhone 5 has been. The battery will drop so quickly. I always let it charge up to 100%, then listening to music, but instead of the battery down not at all, it goes down by 10-20%! Now by the time its 16:00 my phone is off fees or on red. Also at random, my phone turns off. Tell if its on 15% turns off even if theres left battery and used to turn until I load it again. I liked my 6s more and one of the reasons why I got was for the amazing battery life. I would say that I used all the same as I did when the battery was good, so I have no idea what went wrong. Can anyone help?

* MAY I ALSO ADD THAT WHEN THE BATTERYS DOWN VERY FAST SA ALSO WE LOW POWER MODE *.

Tags: iPhone

Similar Questions

  • I am in the last month of my annual subscription of students creative cloud and I don't want to renew.

    I am in the last month of my annual subscription of students creative cloud and I don't want to renew it. I don't want to prematurely cancel.

    Yes, I you I need to contact a human being to check that it is in fact me and that I am allowed to change my subscription.

    But you are making it difficult for me because your cat of 9 to 5 support is not available at the time I write this (09:30). I'm at work right now so I won't be able to use the phone and your phone support stops at the moment wherever I get home from work.

    And I'm not ready to hang on the phone for more than 90 minutes. Yes, I looked in the forum for this issue.

    While I was writing this cat went online an hour late. But they told me to post on the forum while I wait, so here I am, led evacuation.

    Fact. Who's fast, contrary to my expectations.

    Hope this works when the contract is completed.

  • For the last month or more, I had the same two updates for my computer

    original title: Windows updates

    For the last month or more, I had the same two updates on my computer.  Is anyone know why and what I can do to fix this?  I am running Windows XP.  Thank you very much.

    Hello

    the message "you have hidden the important updates" is normal, because you have hidden the high priority updates, but the updates are already installed, if that's OK.

    Try to look again at the web page:

    http://www.update.Microsoft.com/

    and click on "Custom".

    You should not see the updates (KB2518864 and KB2539631) in "review and install updates.

    You should see only "Important - you have hidden the important updates..." and "high-priority - updates non-priority updates to update for your computer... ».

    Then, try this (remove the content of the "'C:\Windows\SoftwareDistribution" ")

    1. Click Start, click run, type services.mscand click OK.
    2. In the Services (Local) pane, click automatic updates, and then click stop.
    3. Reduce the Services (local) window.
    4. Select all the contents of the Windows distribution folder, and then delete them.

      Note By default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. This place is a placeholder for the drive where Windows is installed.

    5. Ensure that Windows distribution folder is emptyand enlarge the Services (local) window.
    6. In the Services (Local) pane, click automatic updates, and then click Start.
    7. Restart the computer.

    I hope that we will achieve the goal, it will no longer still report the updates :-)

    LC

  • In the last months, I started to receive messages pop up when editing pdf files. One is "cannot complete this action because the"filename. " PDF-Adobe Acrobat Pro"program is not responding. "Choose" switch to "and correct the problem. O

    In the last months, I started to receive messages pop up when editing pdf files. One is "cannot complete this action because the"filename. " PDF-Adobe Acrobat Pro"program is not responding. "Choose" switch to "and correct the problem. The other is "content preparation courses. "Please wait while the document is being prepared for" and displays a progress bar. One last question, I noticed it is adobe hangs quite frequently and shows "not responding". I had Adobe Acrobat X Pro for several years, and these have not always taken place only months. I ' n not Adobe expert so I don't know why this is happening. I checked the updates. Any advice on what is happening?

    Hi jeffm7844011,

    Could if it you please let me know the version of the OS on your system?

    Please let me know this happens to you with all the PDF files that you try to change or with specific PDF files?

    Please see this KB document: https://helpx.adobe.com/acrobat/kb/message-content-preparation-progress-opening.html and Windows resolve system errors, freezes | Adobe software .

    Also please try to repair the installation by navigating to the help > repair installation.

    Let me know if it helps.

    Concerning
    Sarojini

  • How to complete the data for months current quarter of the last month of the previous quarter

    • Here is the create table and insert the statement how my data is as
      CREATE TABLE SAMPLEDATA (Snapshot_M DATE, Date_Ky DATE, F_Quantities INTEGER)
      INSERT INTO VALUES SAMPLEDATA (SEPTEMBER 1, 2014 ", 1 SEPTEMBER 2014", 14)
      INSERT INTO VALUES SAMPLEDATA (OCTOBER 1, 2014 ", 1 OCTOBER 2014", 13)
      INSERT INTO VALUES SAMPLEDATA (1 NOVEMBER 2014", 1 NOVEMBER 2013', 12)
      INSERT INTO VALUES SAMPLEDATA (DECEMBER 1, 2014", 1 DECEMBER 2013', 11)
      INSERT INTO VALUES SAMPLEDATA (JANUARY 1, 2014 ", 1 JANUARY 2014", 10)
      INSERT INTO VALUES SAMPLEDATA (FEBRUARY 1, 2014 ", 1 FEBRUARY 2014", 90)
      INSERT INTO VALUES SAMPLEDATA (MARCH 1, 2014 ", 1 MARCH 2014", 20)
      INSERT INTO VALUES SAMPLEDATA (APRIL 1, 2014 ", 1 APRIL 2014", 23)
      INSERT INTO VALUES SAMPLEDATA (MAY 1, 2014", 1 MAY 2014', 30)
      INSERT INTO VALUES SAMPLEDATA (JUNE 1, 2014 ", 1 JUNE 2014", 70)
      INSERT INTO VALUES SAMPLEDATA (JULY 1, 2014 ", 1 JULY 2014", 20)
      Desired results set:
      Snapshot_M Date_Ky F_Quantities
      10 1/1/2014-2/1/2014
      10 1/1/2014-3/1/2014
      01/01/2014 41 10/2014
      4/1/2014 5/1/2014 23
      4/1/2014 6/1/2014 23
      4/1/2014 7/1/2014 23

      My requirement is to load the data in the cube.

      So to summarize, data that are loaded onto the month last only a quarter Q1 tax (Jan) should server as a data for the quarter Q2 next month (February, March, April), the data loaded on the last month of Q2 (Apr) will be server as forecast data for Q3 months and so on.

      Thank you in advance.



    with

    SAMPLEDATA as

    (select to_date('09/1/2014','mm/dd/yyyy') snapshot_m, to_date('09/01/2014','mm/dd/yyyy') date_ky, 14 f_quantities of all the double union)

    Select to_date (October 1, 2014 "," mm/dd/yyyy ""), to_date (1 October 2014 "," mm/dd/yyyy"), 13 union double all the

    Select to_date (November 1, 2013 "," mm/dd/yyyy ""), to_date (1 November 2013 "," mm/dd/yyyy"), 12 union double all the

    Select to_date (December 1, 2013 "," mm/dd/yyyy ""), to_date (1 December 2013 "," mm/dd/yyyy"), 11 union double all the

    Select to_date (January 1, 2014 "," mm/dd/yyyy ""), to_date (1 January 2014 "," mm/dd/yyyy"), 10 of all the double union

    Select to_date (February 1, 2014 "," mm/dd/yyyy ""), to_date (1st February 2014 "," mm/dd/yyyy"), 90 union double all the

    Select to_date (March 1, 2014 "," mm/dd/yyyy ""), to_date (1 March 2014 "," mm/dd/yyyy"), 20 union double all the

    Select to_date (April 1, 2014 "," mm/dd/yyyy ""), to_date (1 April 2014 "," mm/dd/yyyy"), 23 union double all the

    Select to_date (May 1, 2014 "," mm/dd/yyyy ""), to_date (1 may 2014 "," mm/dd/yyyy"), 30 union double all the

    Select to_date (June 1, 2014 "," mm/dd/yyyy ""), to_date (1 June 2014 "," mm/dd/yyyy"), 70 union double all the

    Select to_date (July 1, 2014 "," mm/dd/yyyy ""), to_date (1 July 2014 "," mm/dd/yyyy"), 20 union double all the

    Select to_date (August 1, 2014 "," mm/dd/yyyy ""), to_date (1 August 2014 "," mm/dd/yyyy"), 22 of the double

    )

    Select snapshot_m, date_ky, last_value (f_quantities) ignore nulls on f_quantities (order by date_ky)

    of (trunc (add_months (snapshot_m-1), 'q') select snapshot_m, date_ky,)

    -case when trunc (add_months (snapshot_m-1), 'q')! = lag (trunc (add_months(snapshot_m,-1), 'q')) (date_ky order)

    then lag (f_quantities) (date_ky order)

    end f_quantities

    of sampledata

    where date_ky > = date ' 2014-01-01'

    )

    where snapshot_m > = date ' 2014-01-01'

    order of date_ky

    SNAPSHOT_M DATE_KY F_QUANTITIES
    01/01/2014 01/02/2014 10
    01/01/2014 01/03/2014 10
    01/01/2014 01/04/2014 10
    01/04/2014 01/05/2014 23
    01/04/2014 01/06/2014 23
    01/04/2014 01/07/2014 23
    01/07/2014 01/08/2014 20
    01/07/2014 01/09/2014 20
    01/07/2014 01/10/2014 20

    Concerning

    Etbin

  • 90 days before the last month

    Hi guys,.

    Can someone help me to recover data that are 90 days before the last month of a current month.

    Say that the current month is March then I need to get data that are 90 days before the month of February.

    Your timely assistance is appreciated

    Thanks in advance

    Like this?

    where date_field between trunc (add_months (trunc (sysdate),-1), 'months')-90

    and trunc (add_months (trunc (sysdate),-1), 'month')

  • I have download a creative demo for the last month and created many documents on my computer now change my employer my where are my document or computer how can I get some how?  Thank you

    I have download a creative demonstration for the last month and created many documents on my computer

    Now, my employer just changed my computer where are my document or how can I get some how?

    Thank you

    they are still on the computer you were using (unless someone irretrievably erased).

  • Hello! I ve a problem with the complete abo... How can I activate illustrator after regulation time? the complete abo is already saved for the last month...

    Hello! I ve a problem with the complete abo... How can I activate illustrator after regulation time? the complete abo is already saved for the last month...

    [Duplicate message deleted... post the same question more than once is confusing... MOD]

    [This is an open forum, not a direct line to Adobe support... you have to wait a response]

    Hello

    Please see: -.

    https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  • When you look at the performance of a virtual machine, when you make a graphic of 3 months it appears correctly for the first two, but the last month is compressed.

    When you look at the performance of a virtual machine, when you make a graphic of 3 months it appears correctly for the first two, but the last month is compressed.

    Hello

    When you say that the last two months are compressed. I do not have what exactly you mean by that. Is there a chance you can attach a screenshot of the same thing? Also let me know if there are any made VC-database activity recently?

  • graphic display of performance for the week or the last month?

    Using a VSphere Client 4.1.0 to display an ESX 4.1.0 Server, I am looking at the graph of the performance of the processor (for example).

    When I go into "Options", what I see under CPU options is 'real time' and 'last day '.  Below, time go specifications ('last n periods' and ' a + for ' are all gray.)

    Is there any where that I can set collection or the length to collect & graph interval a longer history, such as week or the last month?

    Thanks for the tips... Lyle

    something greater than what you can buy vmware vcenter.

  • Variable repository for the last month

    Hi gurus,

    I have a requirement to create a repository for the last month variable first day. We have no dimension of the day.

    i, e I should get 1 day last month.

    example: today is 29/07/2009 the variable repository should give me on 01/06/2009.
    If I am on 08/01/2009 the repository variable should give me 01/07/2009.

    Thanks adavance.

    Hello

    There are several ways to find it,
    The following query in the initialization block gives you the result want.

    Select last_day (add_months (sysdate-2)) + 1 double

    Concerning
    Kishore Guggilla

  • Programming logic needed to retrieve the records for the last month/week

    Hi all

    I need assistance in programming SQL logic.

    Oracle database version: 10.2.0.3.0

    Requirement

    In an environment of DW, I need to program to weekly and monthly automated batch insert the data from Data_tbl to Reporting_tbl to generate reports. Descriptions of paintings are given below.

    Table 1 - Data_tbl (Source of table - this table is updated daily).

    Record_dt first name last name


    Table 2 - Reporting_tbl_ (the target table)

    Cycle_dt first name last name

    1. monthly report

    In the SQL query, I where clause conditions.

    Where Record_dt > = 1 November 08 ' and record_dt < = 30 November 08 '

    Using the above condition in development, I'm pulling over the last months data source table data. This will be repeated every month, and it should be automated.
    that is, if I run this report at any time in December 2008, he should choose documents dates from Nov 01 to November 30, 2008. If I run this report at any time in January 2009, he should choose documents dates to Dec. 01 to December 31, 2008.
    Date values must be assigned for the last month. Value of Cycle_dt in the target table must be the date of the end of last month as on November 30, 2008, 31-dec-2008.


    2 weekly Report

    In the SQL query, I where clause conditions.

    Where Record_dt > ='01-dec-08' and record_dt < ='' 07-dec-08

    Monday week start date and end date is Sunday.
    If I run the report between the 08 Dec-14 Dec, it should make records of the dates of Dec. 01 to December 7, 2008.
    On 15 December, he should seek from 08 Dec-14 Dec.
    Value of Cycle_dt in the target table must be the date of last weekend, as on December 7, 2008, December 14, 2008.
    Please help me with the logic for both monthly and weekly reports.

    Thank you

    Hello

    TRUNC (dt, 'W') is the beginning of the week, which may be different days, according to the NLS parameters in your session. Unless you want something that varies from one session to the next, you should stick with the weeks of ISO.

    TRUNC (SYSDATE + 1, 'IW') - 1
    

    is the Sunday of the week underway Sunday to Saturday, which starts and ends in 1 day before the ISO week.
    To find the precedent of the week from Sunday to Saturday:

    WHERE   record_dt >= TRUNC (SYSDATE - 6, 'IW') - 1
    AND     record_dt <  TRUNC (SYSDATE + 1, 'IW') - 1
    

    If you were interested in a week from Saturday to Friday (either 2 days earlier than the ISO week):

    TRUNC (SYSDATE + 2, 'IW') - 2
    
  • Battery emptied quickly after the last update: 1.0.04.12210

    Hello

    Battery is discharged very quickly after the last update of the firmware (1.0.04.12210). In two days (after a full charge) with about 2 hours of every day, the battery was empty.

    If nobody noticed something similar?

    Is there a solution to this?

    Thanks in advance
    Mr. Genady

    Hello

    Battery is discharged very quickly after the last update of the firmware (1.0.04.12210). In two days (after a full charge) with about 2 hours of every day, the battery was empty.

    If nobody noticed something similar?

    Is there a solution to this?

    Thanks in advance
    Mr. Genady

    In the end, I had to root and re - calibrate the battery as shown on the MobileRead Forum. Now, everything's fine.
    It's too bad that Sony does not provide regular ways to do the same.

  • After worsening in the last month that I finally drop with Firefox - 2 hours trying to get today and still not satisfactory - what happens?

    It is impossible for me to put in operation these days and get an instant response. The faster this last month has been an hour - after will disappear and return at intervals. It seems to go better after 08:00 but that it no good for one early don't like me - I should be able to connect at any time, but I can't. As I'm not technically mind I pay someone to come and fix this - and they seem to do it but then it would be when they visit later in the day - but as soon as they are out of the door he's back. I was recommended to use Firefox as it is no longer compatible for my use and served for three years, but now I'm going back to what I've already used on the need, of despair and frustration. Shockwave flash may be busy... plugins does not respond. I am happy to see the back of all this, but such a shame really.

    You seem to be using a very old Firefox profile folder.

    For example, your system details list shows security.enable_ssl2: True and SSL2 did not had been in charge for a while now (Firefox 8 +), so it might be a good reason (opportunity) to start with a fresh profile, through a refresh or through the Profile Manager.

    Reset is not too difficult and requires to open help > troubleshooting information page.
    This page has a reset button to reset Firefox and create a new profile.

    Another possibility is to hold down the SHIFT key pressed when Firefox starts with a double click on the shortcut on the desktop.

    This gives the Safe Boot Mode dialog box that also has a button Reset Firefox.

    When you reset Firefox and a new profile is created and some personal data (bookmarks, history, cookies, passwords, data form) are automatically imported and the current profile folder will be moved on the desktop to a folder "Old data Firefox".

    Installed extensions and other customizations (toolbars, Pref.) that you have made are lost and must be redone.

    It is possible to recover more data from the old profile, but be always careful not to copy the files corrupted to avoid transporting on the problem.

  • System crash noting a Kernel Extension twice in the last month

    Recently (in the month), I upgraded my 2012-16 Gig of OWC RAM MBP. Suspicious #1.

    I also run a 3rd party Extension of Kernel to turn the TRIM on my SSD. It worked well for 2 years, but Kext was included in the "dump".

    Yes I know it's outside of the recommendations and the guarantee, but the benefits are huge.

    In any case I'm looking for advice on how to determine the origin of these collisions. (System with visible screen hangs or restarts with an appropriate message.) Both give a "dump" some of what is happening in my machine.

    I ran to the memory of diagnosis for a couple of hours with no fault found.

    Any suggestions?

    Thank you

    Use these instructions to log in and post the kernel panic:

    https://www.Google.com/search?q=log+kernel+panic & ie = UTF-8 & oe = UTF-8

    Probably the best RAM diagnosis is REMBER of Kelley Computing:

    https://www.Google.com/search?q=Kelley+computing+rember & ie = UTF-8 & oe = UTF-8

    If you choose to run, make the day after sufficient loops are executed.

    Ciao.

Maybe you are looking for