iPhone 7 and BMW Bluetooth streaming questions

Similar Questions

• Noise of blackBerry Smartphones Blackberry Torch and BMW bluetooth?

  I had 4 paired blackberry in my BWM and not had a problem with the sound quality of the bluetooth system.

  the day of release, I had to have the torch. but now I've problems t tasted with the bluetooth in my BMW. It works very well with 3 different helmets, but in my car, I get an annoying "buzz" her (a bit like a PET) when someone speaks and complaints of third parties that I'm really bad stall while I am talking.

  I went to the parameter in the phone and the echo cancellation and encryption disabled, but I still have this problem.

  any ideas?

  FINALLY FIXED!

  There was a blackberry today 05/10/2010 update that fixed it! IM happy, because in fact, I was going back to my 9700, and now I don't have to

  version 6.0.0.695

  https://www.BlackBerry.com/downloads/entry.do?code=577BCC914F9E55D5E4E4F82F9F00E7D4

• you just bought an iPhone 6s and I have a question

  Hello, yesterday I bought the iPhone version of 64GB 6 s and I discovered that he has the Samsung processor inside and the date of manufacture is about 20 November 2015 which is 5 months ago.

  the device itself has been completely sealed and new, what is the gap normal betweed the manufacturing date and the exact moment where the customer gets the iphone? is it ok? should I return it?

  Thank you!

  Did you buy it from Apple or an authorized reseller of Apple (listed at https://locate.apple.com/). If you purchased from an unauthorized dealer, there is no way of knowing where and how they acquire the devices they sell or how long their stock has been circulationg.  Also how, exactly, did you determine manufacture date?

• Z10 blackBerry a way to disable the bluetooth handset and use activate streaming audio only?

  I use bluetooth in my car to make or receive phone calls and it only allows you to stream Pandora.  On my previous BBs, I was able to disable the handset function and just use streaming, but I'm not find similar options on the Z10.  Does anyone know how to do this? Right now I just turn off my stereo when I receive a call, but this isn't a good solution.  Thanks for any comments.

  Hello oumiahamada and welcome to the community of BlackBerry Support Forums.

  Thank you for your question about Bluetooth.

  The Z10 BlackBerry doesn't have the option to edit what services are allowed with a Bluetooth connection.

  Depending on your vehicle, you will need to access your Bluetooth set up or the settings in the dashboard of your car to control what features are Bluetooth-enabled.

  If you don't know how to access these settings, contact your dealer or see your owner's manual.

  See you soon!

• I'm looking for a bluetooth headset that connects to both my iphone 6 and my air of ipad.  I have a Bose bluetooth connection that does work on my ipad.  Any recommendations?

  Recommendations for a bluetooth headset that works on the iphone 6 and ipad air?

  Most helmets will pair at least 2 sources; Check the manual of your Bose can also. But you must pair it both, and you must manually switch the connection when switching from one to the other. It can only connect to one at a time (this is a BT Protocol limit). I have a headset of parrot Zik that pairs up to 5 sources (I use it with 4).

• Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Kev2012 wrote:

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  It would depend on what you're trying to link to?

  Here are the supported Bluetooth profiles an Apple device can connect to iOS: Bluetooth profiles supported - Apple Support

• My dad forgot his password for apple ID and answers to security questions, what to do?

  His phone is iPhone 5. He has already activated the iPhone, but it requires the apple ID and password in order to continue the process of implementation. However, he has forgotten his password and answers to security questions. Now, he cannot use his phone, what to do?

  Hello

  He will need to contact the Apple Support. The information is available here:

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

  (I'm afraid that no one here can solve the problem for him.) You don't talk to Apple here - it is a community based on the user).

• The keyboard and mouse bluetooth suddenly stops working

  I asked this question before using Dell, but none of the answers provided.
  The keyboard and mouse bluetooth suddenly stops working.

  Given that this only happens when I'm online I make this question to the FireFox support.
  I have the latest version of FF:

  I installed the new BIOS and Shipset, but that does not change.

  Suddenly, the keyboard and the mouse do not respond and I have to restart manually.

  R

  FredMcD said

  Keep a log of when this happens. What did you do when...

  Check the batteries.

  Hello

  Thanks for the help

  Just for information:

  I downloaded a free software called "StartupBooster" and using this to disable or remove some programs, problems with the gel (Take on wood), is gone. In addition it also speeds up boot time.

  Concerning

  R

• the iPhone 5 and other battery

  Last December (2015) I had my battery replaced on my iPhone 5. About two weeks later I had to have the battery replaced as it was a defective battery. After that, everything is like new.

  Last Saturday, my sat phone to 100% every day even with constant use. Finally, he died, and after that he turned his back, he began to restart every few minutes. Battery percent stuck to whatever it is when the phone turns on. Restarting is the only way to see a different percentage, but when this phone comes in the restart process. This continues until the battery is completely run out of life. I also noticed a red bar across the screen as it turns off by itself. As a melted from the half of the phone moving to the other seizure completely turned off.

  Is this a battery problem or would be - this another hardware problem?

  As I've not known of your question, it's really hard to diagnose the problem remotely. I can offer you the support page that will help you set aside or confirm any peripheral as the culprit.

  Please read here > get help with hardware on your iPhone, iPad, and iPod features touch - Apple Support

• iPhone 5 can support Bluetooth 4.1?

  iPhone 5 can support Bluetooth 4.1?

  New Bluetooth wireless headsets were 4.1 and 5 of the Iphone with iso 9.3.2 can support?

  sure helmets are backward compatible, so if they take care of A2DP and they also support the profile on devices with older bluetooth support bluetooth a2dp profile

• Horrible with iPhone 6s and 6 home

  Seriously considering to return to our iPhone 4S and iPhone 5. We NEVER had problems talking on the phones of the thesis of our House.  Now with our new 6 phones must walk outside to talk!  And when my husband is in his office, he must walk outside to talk.  This is unacceptable.  Our phones are essential to our work!  What is going on?  We called technical support and was told "it must be our carrier."  Not true.  We have NEVER had this problem before.  Not getting any HELP from Apple!  Not that this matter wrote on this forum other than to help our mental health.  I'm sure that they are not read by Apple. Apple very frustrated and dissatisfied.

  Who is your provider?

  You spoke that carrier your question?

  How many points of strength of the signal and what kind of service is this? LTE / 3G?

• Problem pairing and using Bluetooth THE TI sensor Tag with Z10

  I can't pair and use THE TI Bluetooth sensor Tag with my Z10 on OS version 10.1.0.273.

  I can find out the sensor with bt_disc_retrieve_devices Tag, but when I try to pair with bt_rdev_pair, I get an "Operation not permitted" error (EPERM). If I skip the step of pairing and just the list of services with a bt_rdev_get_services, I get an error "No such file or directory" (ENOENT). Same thing happens in the settings menu bluetooth where I can see the device, but it fails to the pair.

  And then, when I try to connect directly to a service with bt_gatt_connect_service, I get an error 'No such device' (ENODEV), which leads me to believe that I have to be paired first to connect to a service.

  The sensor Tag I pairs and connects very well with an iPhone 4S and on the flipside, my pairs fine Z10 with other devices THE bluetooth so I don't know which side prevents matching. I was actually at the session of JAM62 to BB Live 2013 and devices we were seemed to pair well with the TI sensor tag. Not sure if the version of the OS has nothing to do with it.

  Anyone else having these issues with the TI sensor Tag matching or know of ways to solve this?

  Updated the Tag TI with TI WHEAT SDK 1.3.2 sensor and now it matches successfully. Thank you!

• CUPS, Jabber IM for iPhone, Mobile and external access

  Hello world

  How do you provide external secure access for email Instant Jabber for iPhone client and the Cisco Mobile customer on an iPhone?

  There are so-called security SSL for Jabber Instant Messaging, but is unable to find all the information on how. The Cisco Mobile client appears to the needs of the AnyConnect VPN client and encourage users to connect via VPN, first...

  After a bit of bumping into a wall your head wondering why there was no documentation for external access to Cisco Jabber for iPhone, I realized that Cisco Jabber IM for iPhone is an entirely different product and Jabber for iPhone seems to be the new name of Cisco Mobile customers. Yet, the only documentation I can find for the Jabber Instant Messaging is that I can "security by using the Secure Sockets Layer (SSL) encryption" but no information on implimenting it with CUPS.

  On top of that, the Jabber IM for iPhone can not make calls but rather calls Cisco Mobile, which raises the question of providing external access to this too, and the only solution I've ever found is to use the AnyConnect VPN client on the device also. Suddenly, it seems to offer a solution of Cisco Unified Communications on an iPhone, I need three different and is applications is no longer quite as unified.

  Thank you

  Mark

  Conclusions you drew on the product names are correct. They are transitioning to Jabber like a brand name, but it did not in the iOS VoIP client yet. The most recent Cisco Jabber for Android is the first to include Secure Connect (remote access protected or ensure access transparent, aka). The BU seems characteristic knocking out on a single platform and then replicating them on others before moving on to the next batch of features. I don't have a specific timetable to share but expect customers to iOS updated in the coming months with Secure Connect.

  With regard to the separate clients: I can see both sides of this room. The more I use them more, I agree with the decision to keep them separated and cross-launch when necessary. If you think it is consistent with the way the user interacts already with their phone: voice and texting are two separate applications. I suspect that the developers also get some benefits by keeping things more targeted (e.g. less than test whenever they change something). The only downside to this approach is that each app consumes its own tunnel AnyConnect on the SAA.

• Analytical, when you publish with iPhone 4 and iPhone 5 folios

  For the last three months, began to publish a folio of the iPhone 5 in addition to the prev iPhone 4 and the IPAD slips.

  To avoid having the iphone 4 folio appear in the library of the iphone 5, we publish the iPhone 5 first and make sure it has the same name of publication, version numbers, and the name of folio.

  When it comes to Analytics, we can see a folio iPHONE and an IPad folio.

  Now, since the two folios of the same name, we would include the following: -.

  -Is specific to a folio iphone Analytics (iphone 4 or iphone 5), or are they combined for both?

  The numbers that we see in comparison to prev questions suggest Analytics shows to a folio only!

  How can we overcome them, especially that we have an urgent need to know the number of specific problem regardless of the device.

  If the figures transforms for a folio, how can we safely tackle this and get acquainted with the figures for the other folio

  If your name of slip and the # is the same version for the iPhone 4 and iPhone 5 folio; then you'll see analytical handset for two sheets of SiteCatalyst. In SiteCatalyst, you can do a breakdown of metrics in iPhone 4 announcement iPhone 5 to really understand the download / metric of engagement for different devices. Feel free to touch me directly with your name of the publication / report suite ID and I can help you.

• iPhone 5 and 5s... same size iphone? Need to know about cases

  Does anyone know if the iphone 5 and iphone 5 s have the same exact dimensions? I buy a protective case and the description said 5s (only).

  You can get analytical information in the paper support. Identify your iPhone - Apple Support model