iPhone and Bluetooth

Hi all

Since the upgrade to iOS 10 on my iPhone 6, I noticed that my battery was running faster then normal.

After this diagnosis, I discovered that the settings Bluetooth on the iPhone is always looking for another Bluetooth device.  Other than to cut the Bluetooth (which can't do) is there a way to prevent it from always looking for other devices and this would affect the battery life?

Thank you

Dan Uff

Hi Dan

It is normal that your iPhone to indicate that he is looking for devices when you go to settings > Bluetooth.

That's how you would pair a device to your iPhone after first placed this device in pairing / discovery mode.

Tags: iPhone

Similar Questions

  • Sync with iPhone and Bluetooth streaming

    Hi all

    I synced my iPhone with my iTunes music library, but many songs can not be stored directly on the phone because of a lack of storage space.  However, I still see those who do not have to store and play them from the phone, even when I'm away from my computer bluetooth.

    I wonder if I can resync so that some songs are stored on the phone but I can play them anyway.  Which would free up a lot of memory on the phone.  Seems there should be a way to do this.  I posted a similar question on the forum of the iPhone, but the only suggestion I got was to subscribe to Apple music or iTunes game.

    Any ideas appreciated!

    You could use home sharing which is over wi - fi.

    iOS: set up home sharing on your device - https://support.apple.com/HT202190 - ' with home sharing in iOS 4.3 or later, you can listen to your iTunes library all over your home Wi - Fi network from your Mac or PC to your iPhone, iPad or iPod touch. "

    If they are purchases on the iTunes Store, you can be re - download the unknown for you over wi - fi or a stream and playing them from your device.  This only works for Apple purchases and if you want to extend this to other elements of the music, you will need to subscribe to one of the above services.

  • My iPad is not visible for my iPhone via Bluetooth 6 and won't connect, I tried to reset the network configuration, erase and reset iPad, hard reboot. My Apple Watch is connected to my iPhone. It is visible for my Samsung phone.

    My iPad with Retina display (wi - fi model) to pair it with my iPhone 6 + Bluetooth is no longer visible to my iPhone and will not pair. I have reset settings network, restart hard iPad, iPad are erased and recondition. The iPad is visible and pairs perfectly with my Samsung Galaxy S, no issues what so ever. That's happened? My Apple Watch, which is paired with my iPhone interferes with the matching to the iPhone iPad? The iPad pairs with my MacBook.

    Duncan2011 wrote:

    My iPad with Retina display (wi - fi model) to pair it with my iPhone 6 + Bluetooth is no longer visible to my iPhone and will not pair. I have reset settings network, restart hard iPad, iPad are erased and recondition. The iPad is visible and pairs perfectly with my Samsung Galaxy S, no issues what so ever. That's happened? My Apple Watch, which is paired with my iPhone interferes with the matching to the iPhone iPad? The iPad pairs with my MacBook.

    You can only pair two Bluetooth to attach only apple devices.

    Here are the profiles of support iOS: Apple supported Bluetooth profiles supported -

    Get help with Personal Hotspot iOS - Apple Support

    Share your Internet connection with Personal Hotspot - Apple Support

  • Bluetooth connection between iPhone and iPad

    My iPhone 6 does not connect to my iPad via bluetooth.

    I previously used the bluetooth connection between my iphone and iPad to connect the iPad to the internet. Despite the two devices were among the recognized bluetooth devices and they were previously linked/partner, it was not possible to establish a connection.

    Perform the actions recommended for repair/reissue apple support - 1. Toggle bluetooth, 2. turn on/off the unit, 3. remove the iPhone/iPad bluetooth connections - 4. Reset network settings - 5. Reset all the settings-, nothing works.

    IPhone/iPad devices isn't even on the list of bluetooth devices available on the iPhone, or iPad. Everything that happens is the animated icon turns all the time.

    Deleting a connection to a device and bluetooth speaker/amp from the pairing of the speaker/amp system process made a new connection.

    iPhone 6:

    Model: MG4F2QN/A

    SN: C31NLG8KG5MR

    Version: 9.2 (13 c 75)

    iPad:

    Model: ME898LL/A

    SN: DLXM42LHFK13

    Version: 9.2 (13 c 75)

    Please give instructions for the previous maintenance work bluetooth connection between iPhone and iPad.

    Thanks in advance

    To use the Hotspot feature (that you described for the connection), you must use the instructions below.

    Share your Internet connection with Personal Hotspot - Apple Support

  • How to activate a Bluetooth between my iPhone and my macbook?

    How to activate a Bluetooth between my iPhone and my macbook?

    You do not have. This has never been a feature of the iPhone, iPad, or iPod.

    What you trying to accomplish?

  • How to iphone and ipad detectable with the Mac for wireless and Bluetooth

    iMac is 21.5-in. version 10.11.5; iPhone is 5 c, version 9.3.2. iPad is version 9.3.2. Each device has the ability to drop and it works between iPhone and iPad, but no device is discoverable to the iMac.  I use the dongle Broadband Pendo, connected on router NetcommWireless. The ipad name on the screen of the computer and the computer name displays on the screen of the ipad, but they co not connect. The iPhone name does not appear on the computer screen.

    Go to System Preferences > Privacy & Security > firewall. Turn off the firewall, then restart. The firewall software (if activated) blocks Airdrop.

    Barry

  • iPhone 7/Bluetooth vehicle connection problems?

    Is someone having a problem connect their iPhone 7 Bluetooth in their vehicles? We have upgraded to iPhone 7 this weekend, and none of us can match our phones with the car. Bluetooth in two cars has worked with the previous generation iPhones. We tried clearing previous phones pairs with no result.

    Try here > get help to connect your iPhone, iPad or iPod touch with your car radio - Apple Support

  • Hi there, my WI - FI and Bluetooth do not work. What to do to make it work?

    Hello

    My WI FI connection and Bluetooth don't work. What should I do to make this work?

    Hello

    Follow the steps here:

  • GPS, Wifi and Bluetooth problems

    So I have an iPhone 6 running on IOS 9.3.4 and have had problems with the GPS and the strength of wifi connectivity and bluetooth for a while now.

    First of all, the GPS.  It does not work.  When I run the maps or google maps on my device and the input an address the app can give me a written plan, location, but will not show me on a map.  He'll start road to everywhere where I go and tell me to start position, for example, to the North on the road on that I am, but the arrow does not follow me and tell me when the turn or where I am.  Occasionally, he has a message of guidance down with a spinning wheel and then, after a few seconds, disappears.  I tried to reboot my device several times, I have reset the network setting, I reset all of the settings, I backed up my phone, reset it and recovered save him.  Nothing has worked.  I was at my local verizon store and received a 'new' (its definitely refurbished) phone and the problem persists on the new phone.  I reset the phone to factory setting without content, set up as a new phone and tried the cards again, thinking it might be a problem with the back to the top.  It still does not work.  I'm perplexed right now and do not know what to do/try.

    Second, wifi and bluetooth connectivity is terrible.  I can only receive a wireless signal so that in very close proximity with the router.  I tried to different houses/companies and it is the same question.  However, bluetooth is just as bad.  I use headphones wireless, and go to the gym/go for the route with them.  I used to be able to walk around the gym without my phone and have connected the headphones, but now I can't have my phone 2 feet of the appliance without the music being agitated (bad connection).  I'm really irritated that I cannot understand this point and that he can't seem to find a fixed solution online.

    If you have just updated to iOS 9.3.4, which I didn't even know still shone, so maybe it's a bug that comes with the update. However, your problems seem to follow a trend, you can not far from a source of connection and now a signal. It is perhaps because the necessary components for the Bluetooth, GPS and WiFi signal are damaged or defective. Have you dropped or spilled liquid on your iPhone recently?

  • Can not pair IPhone and IPad via blutooth

    Hello I have an iPhone and the IPad, will be successfully discover and pair Bluetooth devices. They see each other as a device to pair with.

    I have rebootted, reset the network settings, turned the bluetooth on and off. No device available to the other as a pairing and I don't see any residue of a previous pairing nowhere either.

    Any ideas?

    Thank you very much

    Stephen

    Hello, you can find help here Bluetooth: why can not connect my iPhone or iPad with another iOS device or my computer?

  • Can you stereo audio input in an iPhone and listen in real-time?

    Well, it's rather a strange question, so I will explain briefly the background... I am a user of the hearing and I'm considering the purchase of hearing aids new fantasies that are capable of connecting to an iPhone (wireless via THE Bluetooth); This allows several things, including the ability to listen to the audio from the phone.

    I currently don't own an iPhone but wonder if buying one, as well as these hearing aids (Starkey Halo 2, if you're curious) might be a good option.

    The thing that is currently my attention is: is there a way that I could use this configuration of audio stream of (for example), a TV or a stereo directly to hearing aids? To do this I would need power audio * in * the iPhone and do share the same audio output for hearing aids. The audio input should be high enough quality and (especially!) in stereo, not mono; so we couldn't use the 3.5 mm jack. Ideally, I'd like to audio input via a digital SPDIF (PCM stereo) connection; If this is not possible then via a signal analog stereo level line (preferably via XLR, but failing that would make a jack or RCA). Another important thing is that (except what is inevitable due to the nature of the Bluetooth connection), this should be pretty low latency.

    I guess I would need some kind of accessory for this and perhaps also additional software.

    How possible it seems?

    You might want to repost on in the forum "hearing". There seems to be a number of users of Halo.

    Hearing

  • iPhone is Bluetooth volume

    I have a new iPhone, and I feel something strange with the volume of Bluetooth.

    The audio output is very well when I'm streaming of music, but when I switch to a phone call, the audio volume of my car is horrible.  It's like a speaker that is being saturated.  Some words are clear, but many others is very scratchy and distorted, regardless of who I talk on the phone.

    I will not have this same problem on audio integrated on the phone using one of its outputs speakers.

    I tried to adjust the volume with the volume keys and the software nothing works volume settings.  Continue to the volume keys adjust the volume for the music, even after the call is connected, it is impossible to turn down the volume of calls.

    Amy help would be greatly appreciated.

    Thank you

    Michael

    I had exactly the same problem. After calling support I completely renewed my iPhone via iTunes and set up like new.

    A test of the car call was fine, so maybe that helps you, too. Although I don't know if my question is healed completely after the call of a single trial...

  • 6 s ios9.2 iphone and macbook mid 2012 osx 10.10.5 UN-noticeable parachuting

    Hi all, updated for the most recent updates earlier, airdrop no longer works. Can confirm that the laptop could see the iphone until both have been updated (but the phone could not see the laptop).

    I tried to delete the plist bluetooth here: / Library/Preferences /-I've seen it mentioned in old messages. He did not contribute if.

    Any other suggestions?

    Fixed it:

    On iphone: go into settings and turn off wifi, bluetooth, and hand
    On the laptop: disable the transfer procedure (found in settings > General), wifi and bluetooth, as well

    Then turn to, on the phone and the laptop and see if it works.

  • How to connect my iPhone via bluetooth with the mcd289 hi-fi sony

    Hi all

    I feel like this is a stupid question, but I can't for the life of understand me. I have an iPhone running iOS 9.1 5. I just bought a Sony CMT - X5CDB hi-fi Mcd289.

    It has built in bluetooth. I followed the instructions to associate my phone and listen to music from him, but he does not ever appears on the phone as a device for me to choose.

    Any ideas?

    Thank you

    Andrew

    Hi yuley95,

    Sorry to hear that you can't associate your iPhone with your Sony's Hi-Fi speaker. We'll see what can be done to get it paired.

    I would first start by taking a look at the troubleshooting below sketch. Start by making sure that your devices are close to each other, restart your iPhone and speaker ensure that your iPhone is updated to bring them to see each other.

    Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch
    https://support.Apple.com/en-us/HT201205

    First try these steps

    1. Make sure that your device iOS and Bluetooth Accessory are close together.
    2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
    3. Restart your Bluetooth accessory.
    4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
    5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPad, iPhone or iPod touch.
    6. Pairing the Bluetooth accessory, replace the accessory in detection mode, then pair and connectagain.

    Let me know if it helps.

    Nice day

  • IPhone and email address

    I have a new Iphone and when installing with Apple I had to create a new email addreess but I can't find how to download emails on this subject. I'm quite green in this regard, any help would be appreciated

    Why did you have to set up a new email address?

    You added your email accounts settings > Mail > add a new account? Once you do this, you will use the Mail app to send and receive e-mails.

Maybe you are looking for