IPhone - last known location

Similar Questions

• Remember the last folder location lost with Mac Lion updates

  Since the Lion or Mountain Lion, we had an annoying problem where the last folder location is not known in Illustrator. For example what update of links on several files, here for the location of the folder back to the last, was used, but that would be at certain levels of file 3 superior.

  Found

  http://www.stclairsoft.com/DefaultFolderX/
  

  solves this problem. But in the hope that someone else has another solution to have to buy for each computer would get expensive for somethng that used to work. The software seems also to have thing not updated in a time long and do not want a solution that will not last.  Am on 10.8.2.

  This version allows you to choose on the image in order to replace all your images selected in the artboard, with this one, you don't need screening, right?

  #target Illustrator
  
  // script.name = relinkAllSelected_v3.jsx;
  // script.description = relinks all selected placed images at once with a single file;
  // script.required = select at least one linked image before running;
  // script.parent = CarlosCanto // 7/12/11;  version 3 - 07/25/13
  // script.elegant = false;
  
  // http://forums.adobe.com/thread/1169224?tstart=0
  
  var idoc = app.activeDocument;
  sel = idoc.selection;
  
  if (sel.length>0) {
      var file = File.openDialog ("Select file to replace all selected placed files");
      if (file!=null) {// skip if user Cancels
          file = new File(file.fsName.replace("file://","")); // Mac OS Lion fix by John Hawkinson
          for (i=0 ; i		   

• Windows XP does not start normally, without failure or last known good configuration mode

  I was installing Intel chipset drivers and installing, I had a blue error screen IRQL_LESS_THAN_OR_EQUAL, or whatever it was and had to restart. Now that the system hangs when booting normally in safe mode (after loading, or train load... system32\drivers\wmilib.sys), or by using the "last known good configuration". Any ideas? Thank you.

  Hello

  Yes, Windows can be a bit particular when it comes to system files that are essential, but glad to hear that you guessed it sorted.

  You may need to download the USB drivers on another machine and transfer them via USB stick, or something like that.

• XP does not start normally. Must use the F8-last known good configuration.

  For the last three days, XP does not start normally. I use F8 and you select last known good configuration that worked. It gets old. If I try to boot normally, it freezes on Autontfs not found I have a MSI wind Pc with Windows XP Service Pack 3.

  Hello Susanherna,

  The last known good configuration is created during the logon process. This means that something has changed between the time that connect us and time that shut down us the computer.

  At the next startup, select instead of last known good configuration safe mode.

  We want to then try a clean boot.

  The following articles describe this process on Windows XP:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Let us know what are the results of this and we will continue from there.

  Best regards

  Matthew_Ha

• After a power cut my PC is in a loop in the start windows normally, safe mode, last known good configuration screen

  After a power failure when I start my PC, it gets to the screen... "We apologize for the inconvenience, but windows did not start successfully... When I try to reboot in one of the 5 modes to start normally, safe mode, safe mode with command prompt SafeMode with network, last known Noah correct configuration of their work and the loops of the computer to this sreen repeatedly.

  KB307545 is a very bad idea to begin with - especially after a power failure (and it's usually just a very bad idea).  You don't describe symptoms suggestive of a need to run the KB307545, but, I'm not a Microsoft Support engineer so don't hesitate if you are forced to do, and I wish you good luck.

  What you need to do, is start in the XP Recovery Console and run chkdsk/r first.  Is is possible that the blackout damaged your NTFS file system and a chkdsk/r is to clean it.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  See what the BSOD said would be interesting, but I would still recommend that you run chkdsk /r from the XP Recovery Console to make sure your file system is not damaged.

  Answer the questions and we can see what to do next.

• my laptop keeps going to start page.__No regardless of which option to choose, that is to say. safe mode, safe mode, safe mode with command prompt, the last known good configuration, start windows normally, it's always the same

  my laptop keeps going to the start page. No matter which option I choose, IE. safe mode, safe mood with networking, safe mode with command prompt, last known, good configuration start windows normally, it always comes back to the same screen. saw this post before and the invloved boot cd solution. I have not a cd ROM is there another way to solve this problem. Thank you people

  Thank you for taking the time to make this post very informative, excellent. Without the machine test myself that I can't be sure, but based on the age of the computer and what you wrote I suspect for lack of material. It could be something simple like the hard drive or RAM or something more serious like the motherboard. I wouldn't recommend replacing any material on such an old laptop.

  As long as the hard disk has been physically, you can recover your data easily. If the hard drive has failed, then you will need to send the drive to a professional drive savers data recovery company. It is quite expensive ($500-3700), but they can usually recover your data. Some insurance policies cover also, professional data recovery in order to check with yours. But let's be optimistic. ;-)

  IMPORTANT - If there is no question that the drive is at fault - there are noises, for example - and the data is crucial NOTHING else ON THE DISC. Whenever launch you this player you can destroy data. If this is the case, send the drive to a professional data recovery company.

  I'll give you the information on how to test the hard drive to see if it's good physically and how to recover data when you can't in Windows but in doing these things requires a certain level of computer skills. You know yourself the best and that it would be better to take the laptop to a competent local professional. If you do this, do not use a type of BigComputerStore/GeekSquad of the place. Get recommendations from family, friends and colleagues.

  A. test equipment
  
  Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. You will probably need to change the boot order. Your Dell can give you a temporary boot menu if you press F12 as the computer starts. If so, use your arrow key to select the CD drive. Otherwise, press F2 to enter in Setup (BIOS) and change the order of boot on the CD drive first. If the disk fails all physical tests, it must be replaced. Although readers of the laptop cost around $60, you should really consider if it is to put money in such an old machine. You can replace the disk, but the laptop is definitely at the end of its normal life and something else is doomed to failure.

  There is information about the RAM test and other materials here:

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  B. retrieve data detach a healthy disk when you are unable to Windows
  
  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, which is an engraver of CD/DVD OR a USB stick with a capacity to hold your data OR an external USB hard disk formatted FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  C. recovery of activity for the future - http://www.elephantboycomputers.com/page2.html#Backing_Up MS - MVP - Elephant Boy computers - Don ' t Panic!

• I can't on my screen of connection with the re-start 2 - 5 times and then turning it back on last known good configeration! Any help?

  my computer is a Dell (about 4 years and usually great courses.)  THA last year or so it doesn't let me log on when I start (about 50% of the time).  I have to turn off it and re - start in the last known good configeration.  Then he can start and let me connect.  I have re-formatted the HD and reinstalled everything and still problems.

  Hi BudPal,

  You can see the article mentioned below and check if the problem still persists.

   

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Let us know if that helps.

• Cannot start Vista somehow without BSOD, including Mode without fail & last known--IRQL_NOT_LESS_OR_EQUAL

  I don't know exactly what the cause of the problem, but I have a feeling that it is a driver problem. I don't know why the problem started, I've had a laptop where the monitor came out on this subject so I photographed the hard to VMware, I never started an operating system that has not been installed in native mode via vmware before so I thought there may be errors.

  The first time it booted up it starts normally, the Windows Activation came, although I do not know why I have reactivated, and he says that it needs to restart. I restarted and it said it was installing 10 updates - after the updates done, it restarted and then any startup mode, I choose to get exactly the same problem blue screen of death.

  I searched for hours a reply - all, I access the Startup Repair tool command prompt. I think it's a driver issue, but I don't know how to uninstall the drivers from the command prompt.

  It is vital that I have fix without restoring the system or in a Format that I need all programs intact with their original settings. I probably just need to uninstall all the drivers and install them again.

  Hello

  Best to check also with VMware Support and forums.

  -----------------------------------------------------------------

  There are two Bug_Checks with IRQL_NOT_LESS_OR_EQUAL then its best to specify the BCCode or
  Stop Code. Both are 0 a 0x0000000A and D1 0x000000D1.

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 methods (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  ----------------------------------------------------------

  Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
  just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
  The video driver or something affecting it would be questionable.

  Make sure that BIOS driver low-level chipset and drivers are all updated by checking manually
  system manufacturer and device manufacturers sites.

  -----------------------------------

  BCCode: 0a 0x0000000A

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the WindowsAdvanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  Comments

  Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.

  BCCode: 0a 0x0000000A<-- read="" this="">
  * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

  ----------------------------------------------------------------------------------------------------------

  If there is any RAID drivers they are very suspicious and/or drivers problems are very real prospects.
  Other possibilities are video and other drivers. Refer to the section of driver in my credits
  methods of troubleshooting blue screen below. BIOS, drivers low level chipset, memory and
  antispyway/antivirus/security programs can also cause this. Check the resolution of problems and when
  you get the pilot section refer to generic methods in next message and return to
  the troubleshooter if necessary.

  BCCode: D1 0x000000D1

  Cause

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

  This bug check is usually caused by drivers who used a wrong address.

  If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

  • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
  • The function call was made to a function in another pilot, and that this driver has been unloaded.
  • The function was called by using a function pointer that was an invalid pointer.

  BCCode: d1 0x000000d1<-- read="" this="">
  * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

  ==================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen
  of death "crashes and displays the information about all crashes in one
  Table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Vista restore to the last known good configuration

  I have installed updates that made my Windows Mail and my bluetooth travel mouse not functional.  I tried to restore to the last known good config. using the F8 key at startup, but it won't let me choose the config I want restored like XP does.  Nothing happens when I select this option.  Is there something that I'm not in Vista Home Prem restoring what I need to do?  WAHTASH

  Hello

  You can try to remove the updates of the problem. When you determine which were the cause then
  You can right click on it in Windows updates - updates available and HIDE.

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  =================================

  If necessary (however best to try the above) use the system restore.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• After installing Windows 7, the system does not work properly and must use the last known good configuration

  I installed the upgrade of Windows 7 a few months ago, my system was Vista 64 for everything I need, it was the upgrade, when I turn on my PC, my Start menu is not and none of my icons, to fix what I have to keep turning off my pc and turn on again by pressing F8 then go down to the last known configuration, how to fix this without having to shut down my PC and press F8 so that it starts normally all the time

  Download malwarebytes and run a virus scan to make sure that your computer is virus-free.

• Why can't Windows 8 allow us to save the last save location or to specify a default save location that is NOT my document?

  I get very irritated by how Windows 8 behaves in what concerns the registration of files from the internet.

  Don't know anyway or tricks Windows 8 brand allow me to save the last saved location or to specify the default saving location, it's not "my document"? It drives me crazy especially when I try to load files for my email or down when you save files from the internet.

  Concerning

  I figured out, you click on your folders icon in the lower left corner, then click 'libraries' left, make a right click on 'my documents' or 'my images' depending on what you are trying to save, click on properties, click on 'Add' and select the desired drive, then make sure it is ticked as "save location" and remove the other 2 in the list... Click apply / OK. BAM now whenever you save a document he will enter the location of your choice / image if you did it in my photos

• Find my iPhone can not locate devices

  I have an iPhone, iPad and Mac. Find my iPhone is enabled for all devices and all are online. Location services are on, and working in maps, but find my iPhone says it cannot locate one of my devices. The devices are listed and shown online, but with no location. The feature "beep" does no more work. I discovered this when I had lost my phone and tried to locate using my iPad. Fortunately, I found my phone, physically but not the has not found through the app. The same thing on my phone which cannot locate my iPad. I want to solve this problem in case I lose my phone again! Any ideas?

  If you connect from www.icloud.com you can locate?

• Why does the camera on iPhone last several images when I press the button once?

  Why does the camera on iPhone (5 c) last several images when I press the button once?

  Also, WHY when I email it to myself not come to my Inbox in?

  Sylvee

  1. When you press the button for too long, you take, what we call, Photos of Burst. It's getting so you can choose the one that needs to be said, a sequence of quick action. Practice a tap faster the button to avoid this problem.

  2. Please explain in more detail.

• Keynote not remember last insert location

  Good day to all,

  When you insert a picture from the Photos App in Keynote (MBP), I need to access the album OK/etc to select the required photo. However, when adding additional photos or the replacement of an existing photo, taken from the album even in the Photos, I have to re-navigatre to the same album in the Photos App. Is there anyway I can get Keynote to remember the last insert/import location that I used. Re-sail again and again so is your time.

  Concerning

  Kevin

  Keynote 6.6.1 to Yosemite always shows the last used folder. If Photos, music or movies.

  Annoyingly, only a single image at a time can be imported.

• Windows XP restarts all the time; does not start mode safe mode and last known Configuration does not work either

  Hello! Recently, I installed Wubiand appreciates well. However, a few days ago, when I tried to boot XP on my netbook (EEE PC 1005hab), it restarts just constantly return to the selection screen of the BONES. I tried Safe Mode and last good Configuration known with anything will do. What should I do now? Ubuntu has not stopped working suddenly, so I can't access my data.

  I don't have to have a Windows XP CD, there is something weird Asus recovery instead. In addition, it is a netbook so I don't have an optical drive to run the recovery CD. I'm doing a Livecd of Linux USB so I can back up my data... but I can do but reinstall at this point?

  Thank you.

  The afflicted system has a working CD/DVD drive (even an external).

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu, it has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start pressing the F8 key with more urgency (earlier and more frequently) until you see disable automatic restarts on system failure, and then select it.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!