Windows XP restarts all the time; does not start mode safe mode and last known Configuration does not work either
Hello! Recently, I installed Wubiand appreciates well. However, a few days ago, when I tried to boot XP on my netbook (EEE PC 1005hab), it restarts just constantly return to the selection screen of the BONES. I tried Safe Mode and last good Configuration known with anything will do. What should I do now? Ubuntu has not stopped working suddenly, so I can't access my data.
I don't have to have a Windows XP CD, there is something weird Asus recovery instead. In addition, it is a netbook so I don't have an optical drive to run the recovery CD. I'm doing a Livecd of Linux USB so I can back up my data... but I can do but reinstall at this point?
Thank you.
The afflicted system has a working CD/DVD drive (even an external).
You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?
If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.
Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again. You have tried them all!
The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.
If this is the case, you must call Options menu advanced boot yourself until you do not see the option:
Disable the automatic restart in the event of system failure
When you get the XP Advanced Options correct start menu, it has options on it like these:
Safe mode
Safe mode with networking
Safe mode with command prompt
Enable Boot logging
Enable VGA mode
Last good Configuration known (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Debug mode
Disable the automatic restart in the event of system failure
Start Windows normally
Reset
Return to OS Choices Menu
You need to choose in this menu is the option:
Disable the automatic restart in the event of system failure
Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.
If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.
If you miss the window of opportunity F8, you must try again and start pressing the F8 key with more urgency (earlier and more frequently) until you see disable automatic restarts on system failure, and then select it.
You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.
Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.
Do, or do not. There is no test.
I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
Tags: Windows
Similar Questions
-
Desires of Windows Update restarts all the time to complete updates
Update Windows (W7) asks to reboot all the time. I am up to date with all updates. There are usually deferred until 4 am, but sometimes not, and is called a reboot scheduled for 10 minutes. How can this be stopped? I tried to go back to a restore point, and then update again.
The manual installation of updates that you have to change your update settings to never check the updates and restart the machine first.
http://www.SevenForums.com/tutorials/2797-Windows-Update-settings-change.html
Before you try to install manually the updating of double control and make sure that the windows update service does not work after restarting
If so, stop the service and at least switch to manual.
If it is to stop the service and apply
These links will prompt you to download as soon as you click on them just for you give a heads up :)
Then manually install page article detailed KB3172605 with all versions.
https://support.Microsoft.com/en-us/KB/3172605
KB3172605
Win - 7 32-bit
Win - 7 64-bit
After your windows update settings back to what you had before, and manually check the updates and the rest should appear shortly.
If you need Visual AIDS to refer to this
-
Original title: problems cannot do anything
Windows cannot access the specified device, path or file. You can't have__appropriate the permissions to access the item. I get it all the time can not download anything
Hi birdylod,
· What version of the operating system is installed on the computer?
· You did changes to the computer before the show?
· You use Internet Explorer? If so, what version are you using?
· What files you download?
Follow these methods.
Method 1: Performs a search using the Microsoft safety scanner.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Method 2: Follow these steps:
Step 1: Start the computer in safe mode with network and check if the problem persists.
Startup options (including safe mode)
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.
Method 3: Scan the file system (CFS) auditor to repair corrupted files.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
For reference:
What to know before applying permissions to a file or folder
-
6 64GB iPhone - restart all the time
Hello
Since yesterday my 6 64 GB Iphone restarts all the time.
There are apple journal on the screen, then screen is black and once again apple appears.
I can't stop it, I can't go to the deskop. Nothing. Mobile phone doesn't help.
What will happen? Please notify.
I've read a few articles that the iPhone 6 have such problems because of the memory of TLC.
My cell phone is 15 months old, still on warranty. I will send a formal complaint to Apple?
Thanks in advance for any advice.
Martin
MY phone which does too! is it not so boring! I have an iPhone running iOS 10.0 6. Help, please
-
Satellite A300D restarts all the time
Hello
My Toshiba Satellite A300D 14 p restarts all the time and I can't do anything!
I turned it off last night and today, when I pressed the power button it worked for 1-2 seconds and then again did a restart.My screen doesn't show anything (because it only works for 1-2 seconds).
Any ideas?
And last night, everything was OK?
Have you installed anything it either on it or maybe update the BIOS?Unplug the AC adapter / CC, remove the battery and leave it for a while. Later, connect the power adapter only and try to turn on your laptop.
The same thing happens again? -
Satellite A305 S6837 restarts all the time
Hello world.
I REALLY NEED SOME GOOD HELP OR EXPERIENCE ON YOUR SIDE. I HAVE A SATELLITE A305 S6837 WHO, AFTER THE LAST UPDATE OF MICROSOFT, HAS BEGUN TO RESTART ALL THIS TIME. THE COMPUTER DIDENT GET EVEN WITH THE WINDOWS RECOVERY CD. I REPLACE HD, MEMORY MODULE, CLEANED THE FAN, CHECK THE CURRENT OF THE CHARGER.
WHEN I START THE COMPUTER WITH THE RECOVERY CD, AT THE BEGINNING AND THEN AFTER LOADING THE WINDOWS OF THE COMPUTER FILES IS BLOCKING DOWN AND RESTART AGAIN, COMING AS A RESULT MESSAGE. BOOTMGR MISSING PLS PRESS CTRL + ALT + DELETE TO RESTART.
IS THERE ANYONE OUT THERE WHO CAN GIVE ME AN INDICATION OF WHAT THE PROBLEM IS OR NO MATTER WHAT IDEA TO FIX IT. HELPFUL WITH ALL KINDS OF ANSWERS, PLS REPLY TO MY E MAIL IF POSSIBLE.
RGDS ROGER
That s strange. Even if the system is damaged, the installation should work using the recovery disk
Error message: bootmgr missing means that your system is confusing to the top. System files are corrupted or misconfigured. It might be possible that your disk sectors are damage or the HARD drive is not properly configured to be started from.You can try to boot from the authentic Microsoft Win 7 disc and may format the HARD drive including a deletion of all available partitions.
After the HARD drive has been formatted, try to install the system using the Windows 7 disc. -
I called Dell a few weeks ago. They had me remove the battery, press the power button 15 X and then restart. They did a scan of material and said that everything was going well. I ran once again virus scan software, and there is no virus. I deleted all temporary files. They said that perhaps, it might be a problem of software somewhere but wanted a ridiculous just to check amount only. Do I have other options as to how can I fix? This is a NEW computer that I just received in August!
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html---------------------------------------------------------------------------------------
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
a small box in the lower-left - show for all users can check only).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
they loaded and much more. This exceptionally effective utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to startup automatically when your system boots and you
opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
start the settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
The command - line String, product name, file Version, company name, location in the registry or the file system,
and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 the love of the updated drivers that can drastically affect the performance so I would update the main
drivers.This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
each driver in the list, additional useful information is displayed: load address of the driver, description,.
version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Always check in the Device Manager - tab drivers version you install actually shows up. This
because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
pilot - reboot - check that it is installed and repeat if necessary.Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
Windows 7 freezes all the time
Constantly crashes any program I am or what I do. Freezes when it is sitting idle. I just bought a Sony VPC F11PFX/H. 64 bit. I use MS Office Enterprise 2007 and Windows 7. Help.
Hello
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista or
Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7 http://www.howtogeek.com/howto/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-windows-7/
Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to for many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Performance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I am dual-boot between Windows 7 and Windows 8, but fear the time required to start,
I am concerned about the time it takes my computer to start
I have a system dual boot with Windows 7 and Windows 8, and it takes several minutes to decide to show me the screen to decide which OS to use, and then it restart and takes some time to start [the chosen OS
Isn't time that Microsoft has put some of their skills as computers immediately when starting lit instead of focus on trying to outdo all other systems with stuff
By the way, I have the same comment on the closure, it takes some time to completely close down--another point for Microsoft to put the attentionUnfortunately, the processor is just at the level of the minimum required. In addition, RAM is 4 GB, in which folder page size will be approximately 8 GB. Norton 360 scans all files prior to execution, even if it's a system file. This is the reason for the delay.
Try to upgrade the processor and the rest will be solved. -
Java plug appears not and all the fixes do not work.
I tried all the solutions proposed in the forums and firefox java plugin related posts - nothing works. asks me to install the plug-in missing, then said no suitable are available - Hello, ever heard talk about java. They tell me to do the plug-ins reset - it does not work. What would you say to reinstall java - I do and it does not however in firefox plugins - works fine in safari.
As a longtime firefox user, I am very disappointed that they have not been able to address an issue as basic browser and now I am forced to use safari which at least have no problem loading of java content. Please, firefox, wake up and solve this problem.
Hello
Thanks for the reply.
Have latest java.
I'm assuming to 64bits for osx 10.8.4 means 32bits uncheck in 'get info', which was growing and problem solved.Thank you very much.
-
3rd party FTP, all the Widgets do NOT work!
Hello community and Devs
Ive got problems with my site download muse and external host. None of my widgets don't work properly! There is the Menuwidget where the drop down menu does not work, the slide show in the menu and the wdget at the foot of page citations.
Ive tried to download with MUSE and also with filezilla and smartftp. I googled a bit about that issue and some say that maybe every file downloaded correctly because of the authorization, but if I compare the folder on my computer and ive uploaded to the ftp server, those are the same!
Anyone know whats wrong?
www.ulysseshuber.ch
uhuber. BusinessCatalyst.com
Marc
SOLUTION: Get an another Web server host
Do anyone know what PHP version works best for Muse?
-
I use live mail and Comcast as my ISP.
Out of the blue I can receive emails, but when I try and send emails I get this error.error 0X800CCC0E.
Comcast is no longer supported the use of port 25 for SMTP. Please follow the instructions on this page to apply the recommended settings: to reconfigure your Windows Live Mail client to use SSL instead of port 25
After, click work offline and delete all messages pending from the Outbox (below the records of account in the folders pane). Then close WLMail and wait a few minutes before resuming. Compose a new message to test and send it to yourself. Post a new message in your response.
-
The 'notification of downloads window' keeps popping up. I have no use for it either. If I can't get rid of it, I will stop using Firefox as my browser.
Hi hkivhk,
Ask yourself if you can disable the downloads window? It's actually pretty easy. Just go to Tools > Options > general. If you have the Firefox menu, simply press Alt to temporarily activate the menu bar.
You can find more information in the following article Starter , homepage, tabs and download settings.
Hope this helps!
-
How can I stay on zoom 120 all the time? It goes back to 100 and some Web sites in new tabs
Between Web pages he keeps going back down to 100. Is it possible to set it to 120 between the tabs and Web pages?
The zoom settings are on a per site basis.
NoSquint {web link}
NoSquint allows you to adjust the text-only and the full page
(text and images) zoom and color settings levels
both globally (for all sites) and by site. -
All the tools do not work in arcGIS10 software but if I new user creat, it works.
Nathalie Prakash, ISU student
Hello
1. is the ARCGIS 10 software-specific question?
2 have you made changes on the computer before this problem?
I suggest you go through the configuration required for the ARCGIS 10 software:
http://resources.ArcGIS.com/content/arcgisdesktop/10.0/ArcGIS-Desktop-system-requirements
If the problem specific to ARCGIS 10 software, communicate with them using the link:
I hope that the above information is useful!
Maybe you are looking for
-
identifying Apple is locked for security reasons?
identifying Apple is locked for security reasons?
-
Satellite A300-1ND - can I use SATA2 HARD disk?
Hello.Is there a place to upgrade A300-1NDs SATA HDD hard drive SATA2? I know that SATA2 is faster and is backward compatible with SATA, but do not know if the laptop would be able to use the full speed of SATA2. THX all
-
T430 Trackpoint Scrooling after Windows update (7-10)
HelloI did the update to Windows 7 to 10 yesterday and the Trackpoint Scrooling does not work on all software. I updated the driver (Synaptics ThinkPad UltraNav Driver, version 19.0.17.85), but the problem is not resolved, including the use of Micros
-
Windows Update error 80072EFE - Windows 7
Original title: error code80072EFE I am unable to update Windows 7. He was inactive for several months. It is set for automatic updates. Should I restore the computer back to the original settings. When I try to update, I just get the error message.
-
Is it possible to configure a HP Office Jet 7500 a without the help of its touchscreen?
I bought a hp officejet 7500 used a. When I went to use, I found that the touchscreen does not work. to top it off, the printer has been reset to factor settings and I can not run setting the screen on the printer. is there a way I can set up the pri