IPhone needs to be cleared in the locked mode?

Similar Questions

• the iPhone camera App is not memorize the recording mode

  Hello

  I use the default photo from Apple on my iPhone App, especially because I can shoot while the iPhone is locked. No other applications can do that, not even using the Notification Center (other applications for registration as Strava can do it, but not to record video).

  However, I noticed that most of the time (but), mode (video, panorama, photo,...) is not like it was before.

  I turn almost only videos (idling, when outdoors). Whenever I start the camera application, either in the "sweep upward" screen (locked phone), or from the home screen in unlocking the phone, the camera always (or almost) default is still Photo. I have not found a way to default to the video.

  When you have to take action, it is very annoying to have to fumble with the buttons until you can actually draw. Not to mention that the app is so slow that initialize in the meantime, you cannot drag on the video mode (until the camera is completely initialized); then you drag too and the video mode Miss... it's a mess...

  However, sometimes, apparently when you start the camera after making a video, the unit starts in video mode... but you expect it to start in photo mode, you can already drag by anticipation and video mode Miss yet :-)

  The behavior is not very consistent.

  Unless there is something that the camera behave correctly, I think apple should seriously improve at least 3 things in the camera application:

  (1) in previous versions of iOS, the initialization of the camera was not otherwise slow. How about you do it as fast as it was before?

  (2) pass from still photo to video, then to move slow takes too long. The control must be more effective and faster. You should have a faster and more direct access to the different modes of recoding. How about a configurable "by scanning screen?

  (3) the camera app to set the frequency of default images for videos. What about settings for the default recording mode? (video, panoramic)

  Hi there redtomato,

  I understand that the camera on your iPhone app will automatically in video mode you want. If I always had to take videos, I think it would be very convenient to open the camera in video mode application every time I opened it.

  I tried what you said on my end, opening the camera my screen lock and video mode change application then blocking of my iPhone, and then repeat the same steps. Surprisingly, when I conducted my test of the camera to video mode application.

  I'm quite uncertain that if if it is a small problem with iOS, or if it was something that apple designed specifically, or maybe I'm just having chance repeating the steps you mentioned. To help troubleshoot your device, I recommend you to make sure that you use the latest version of iOS if your device is up to date. Once you have done this, try to restart your iOS device and see if you're still having problems.

  On reflection, maybe you can force the camera app to quit smoking? If this is the case, this could explain why you may need to manually change the camera in video mode application each time.

  I think your suggestions are great ideas, and if you want too, you can submit your ideas to Apple directly here: http://www.apple.com/feedback/.

  I love my iPhone and I like the camera on it and especially photography, so I can understand how you feel about the inconvenience, but I really hope the information I've provided help it it, otherwise, if all goes well it will be or is somehow.

  Continue to take great videos!

• iPod in the locked mode, no matter where the hold switch

  Have a 30 GB iPod which can not be taken out of his locked mode.  Was plugged on my desktop Windows 10 to be recharged.  He had some charges, if the battery was not completely drained.  iTunes started when the iPod is connected and the display on the iPod turn on.  The message on the screen was 'do not disconnect '.  iTunes never recognized the iPod and never started a resynchronization.  After four hours, the iPod shows always the same message, that the battery symbol does not indicate the battery is recharged and the locked icon is in the upper left corner, even if the switch is not located mode. Y at - it a hope that I can access my iPod again as all my Christmas music is on it?

  If the iPod does not respond, try to do a Reset (reboot iPod)

  Learn how to reset your iPod - Apple Support

• Double monitor turns off the second monitor in the locked mode

  Hello

  We work in an environment of support and use the installation of two monitors. Win7 heard to have good management of these settings and easy-to-use features. However at some point, something that was great went troubled.

  We can use two monitors while working on it however just its coastline turns off the second wallpaper and screen savers set if necessary. I tried to look for any change in config, but in vain. Looking for answer now here.

  Thanking you in advance.

  Kunal Pathak

  There is no built-in way to change this feature. When it is locked, the screen will be black. There may be some 3rd party software that can do this, but it is not supported by Microsoft. Matthew Arkin - answers Windows - Windows Desktop experience MVP moderator - http://twitter.com/Microsoft_Cares
  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
  Need to send me an email? Click on my name, my email is on my profile page.

• Running Windows 7 Professional with XP Mode - need help with access to the XP Mode

  Windows 7 Professional and installed XP Mode so I could run my Outlook Express email accounts. I was changing my password xp mode and before I finished putting a new password my computer loses power. Now, I have no way to get xp mode to work (the previous password does not work). Any help on opening the program would help! Thanks advance!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Windows Virtual PC and XP Mode Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

• How to replace the 'lock' button in the menu start into something else, for example, the button 'restart '?

  I don't use is the "lock" button because I use my computer only for home. However, I also have the button 'restart' for show because my programs freeze sometimes and I need to save data in this way. I need to show instead of the "lock" button Is this possible to do?

  Here is the tutorial to remove the option of locking, unfortunately it will also remove the option to switch user:
  http://www.Vistax64.com/tutorials/120510-lock-switch-user-add-remove.html

  I'm not sure the option "restart". I have Vista Home Premium SP2 and restart option is present in the start menu.
  What operating system do you use?

  t-4-2

• AlreadyLockedException: Cannot lock the file, another user holds the lock

  I created the client application to web service using Jdeveloper 11.1.1.7 and deployed on weblogic 10.3.6 on cluster consists of 3 servers. The task of the application is to extract the data from the DB and push application external server permanently. Everything seems fine and works applications. The problem is with some message logs on all three servers.

  I see the following stack of servers:

  oracle.jbo.AlreadyLockedException: Houston-26030: unable to lock the file, another user owns the lock. [[

  at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelectForAltKey(OracleSQLBuilderImpl.java:1105)

  at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelect(BaseSQLBuilderImpl.java:567)

  at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:8589)

  at oracle.jbo.server.EntityImpl.lock(EntityImpl.java:6237)

  at oracle.jbo.server.EntityImpl.beforePost(EntityImpl.java:6756)

  at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6943)

  at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3301)

  at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:3106)

  at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2108)

  at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2389)

  ........

  It is clearly stated that another process locks the record while the current process tries to lock the record even. Yet once obvious to say that the same application is deployed on three different servers (i.e. on the cluster) and each application tries to do the same task at the same time in each of the three servers with cluster.

  Question: It is healthy to ignore this error? or I have to solve out?

  I also checked this blog (Andrejus Baranovskis Blog: optimistic and pessimistic locking in Oracle ADF BC) he explains the difference between locking type available in the application model (optimistic and pessimistic). Will I change the lock mode in the request form for the client application that is mentioned to be optimistic rather than pessimistic? This will solve the problem? Is it OK to do with the behavior of the application who explained.

  I thought about this a bit more and would not use temporary tables. Because the ADF does not guarantee that a session database is still used by the same am it will be difficult to control.

  You can use a column in the table itself to write, for example, the name server that will manage the data before doing the real work.

  Our you will find further information in the table that allows you to balance the work using this in a query. Sample would be a column id that allows you to select only the tires where the modulo 3 id is equal to 0, 1, or 2. In this way, it would be pointless to write something on the table before proposing the line as each server would see only the lines it is supposed to work.

  Timo

• Reset the system configuration resets the lock for disabled mode?

  The host runs ESXi 4.1. I activated the lock mode in vCenter which takes place in one of the virtual machines on the host.  Later I stop the host.  Now I can connect to this server vCenter because it is broken and can not connect the host via vSphere client because the lock mode is activated.  The lock mode setting is dimmed in DCUI. So I can't go in the lock mode setting to turn it off now.  In addition, it does not allow me, connect to local TSM with the correct root account. so I can't disable lock mode using vSphere CLI.

  Is there a way to start the virtual machines in this situation?

  I'm not sure that reset system configuration in DCUI will help, it resets the mode of locking for disabled?

  or if rebuilt the ESXi reinstall it will help? It will remain of all virtual machines?

  Any help will be appreciated.

  Welcome to the Forums

  Given to zero configuration system is like having a new facility.

  You will have to make all the configurations, IP, password, vSwitches, etc.

  You will need to add your virtual machines to the inventory by browsing through data warehouses

  concerning

  Please allow points if you find this useful/correct

• If I turned on the lost mode and erased my iphone, password to unlock will be disabled?

  I lost my iphone. If I turned on the lost mode and erased my iphone, password to unlock will be disabled?

  There will be no access code, but also no data on the phone, so it's okay.  Cannot use the phone until it is activated, which will require your password Apple ID.

  You can receive text messages saying that the phone has been found and asking you to verify your Apple ID, or to connect to a Web site with password Apple ID.  These are fake, just try to get your password to activate the phone stolen.

  Do not remove the phone from the list of devices in iCloud.com

• going to the lock screen when starting

  When I start my laptop it goes directly to the lock mode... so, how can I get rid of this problem?

  "Lock mode" - you mean you see the logon screen or you see the options as "block this computer, change user, starting Task Manager, etc."?

  And if you want to connect to your account automatically, follow these steps:
  Press Windows key + R (for Open Run). Type netplwiz and press ENTER. Make sure the tick is removed, or the option is disabled in users must enter a user name and password to use this computer. Once this is done, click on apply and then OK.

• What is the Total Lock Mode?

  Hi all;

  What are the differences between the lock Mode and the Total Lock Mode?

  Thank you

  Plaeas take a look at VSphere 6.0 Modes of locking which explains how to configure this on vSphere 6. For vSphere 5 see, for example, a vision of ESXi 5 locking Mode.

  André

• Disable the root without locking mode login

  Hello

  How to disable root ssh login without activating the lock mode in esxi 5.1?

  Disable root access using the host command line console... Edit the sshd.config file and the... and comment the line allowed root...

  Visit this link... so that you can do it easily... Here are step by step... documentation

  https://KB.mediatemple.NET/questions/713/how+do+I+disable+SSH+login+for+the+root+user%3F#DV

  Yours, Phillips

• Is it possible to collect the lock by SDK mode attribute?

  Hello

  Is it possible to recover the locking mode of an ESXi host attribute using the SDK?

  This option is available in "Configuration - & gt; Software - & gt; Security profile", when connected using the VI Client.

  Thank you

  Praveen-

  Yes, I think you can get that by looking at adminDisabled http://www.vmware.com/support/developer/vc-sdk/visdk400pubs/ReferenceGuide/vim.host.ConfigInfo.html that I don't have access to my lab to check, but I remember this up a while back and I think that this indicator tells you if it is enabled/disabled. I do not believe in the current API you can right/turn off the lock mode, must be made via vSphere Client or by using undocumented API call enableAdmin/disableAdmin

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Cannot delete the airplane mode

  Even when I turn off airplane Mode on my phone, it remains on my watch. Mirror of my iphone is not really

  work, or turn it off manually. This is crucial, so any help will be greatly appreciated. Thank you, HAP

  w

  Hi Peter

  It is possible to put the flight to be mirrored between the devices, but the same does not apply to get off airplane Mode, that needs to be done separately on each.

  To change the setting for mirroring of the turn on airplane mode:

  -On your iPhone, in the application of Eve, go to: Watch My > General > airplane Mode - enable or disable the iPhone, to choose mirror.

  When the watch is in Airplane Mode, Bluetooth and Wi - Fi turned off, so there is no way for it to receive additional instructions from your iPhone (including a statement to exit the airplane Mode when the mode on your iPhone).

  To turn off the airplane on your watch Mode:

  -When you view the time on your watch, drag to the top of the lower edge of the watch face > drag left/right to the gaze of settings > press airplane Mode to turn off the mode > slide down on the screen to exit the looks.

• Lock mode "optupdate" with SQL92

  JDeveloper and ADF 11.1.1.4.0
  
  I'm having trouble getting the mode of locking < police = "Courier New" > optupdate < / police > work in my webapplication to update the lines. The app should work with two different database: DB Oracle and MySQL, so < police = "Courier New" > SQL92 < / police > is used in the < font = "Courier New" > Houston. SQLBuilder < / police > property. Type mapping is set to < police = "Courier New" > Java < / police >. Almost everything as described in http://www.oracle.com/technetwork/developer-tools/jdev/multidatabaseapp-085183.html is done.
  
  The following error occurs on the DB Oracle and MySQL (< police = "Courier New" > # < / police > is a number):
  
  Oracle DB: < police = "Courier New" > java.sql.SQLException: parameter IN or OUT to missing index: # < / make >
  MySQL: < police = "Courier New" > java.sql.SQLException: no value specified for the parameter # < / make >
  
  I will return to shortly logging. As a test case, I built a minimal application with the following properties:
  
  -Connects to Oracle DB;
  -Locking mode < police = "Courier New" > optupdate < / police > is defined via < police = "Courier New" > adf-config. XML < / police >;
  -Module a single application, a single entity, subject of a point of view, built declaratively (no expert mode);
  -A JSPX page with just a form of the current line (first).
  
  The only property I have change is < police = "Courier New" > Houston. SQLBuilder < / police > < font = "Courier New" > adf - config.xml < / police >, in order to simulate different databases. When it is defined < police = "Courier New" > Oracle < / police >, update a line works as expected. When it is set < police = "Courier New" > SQL92 < / police >, it gives the above error. When the lock is set to < police = "Courier New" > optimist < / police >, it works as expected, regardless of the < police = "Courier New" > Houston. SQLBuilder < / police > property.
  
  Now, what I see in the logging is that ADF trying to bind parameters identification and update the line. The difference lies in the way that ADF is trying to identify the line. When the lock mode is < font = "Courier New" > x < / police >, it uses the primary key, such as defined in the entity, which works very well. When the lock mode is < font = "Courier New" > optupdate < / police >, it uses all the attributes of the entity to identify the line. Most of these attributes require liaison. When < police = "Courier New" > Houston. SQLBuilder < / police > is set to < police = "Courier New" > Oracle < / police >, all these links are used. This is not the case with < font = "Courier New" > SQL92 < / police >. For example:
  

  jbo.locking.mode = "optupdate"
  jbo.SQLBuilder = "Oracle"
  
  [625] UPDATE TEST Test SET CODE=:1 WHERE ID=:2 AND CODE=:3 AND NAME=:4
  [626] Update binding param 1: Test2
  [627] Where binding param 2: 1
  [628] Where binding param 3: Test
  [629] Where binding param 4: TestName
  [630] TestView notify COMMIT ... 
  [631] DBG: afterActionPerformed :Commit

  jbo.locking.mode = "optupdate"
  jbo.SQLBuilder = "SQL92":
  
  [625] UPDATE TEST Test SET CODE=? WHERE ID=? AND CODE=? AND NAME=?
  [626] Update binding param 1: Test2
  [627] Where binding param 2: 1
  [628] SQL92SQLBuilderImpl.doEntityDML failed...
  [629] X/Open SQL State is: 99999
  [630] java.sql.SQLException: Missing IN or OUT parameter at index.: 3

  It does not fill the rest of the settings. Note that this also happens with MySQL. Derivative, < police = "Courier New" > Houston. SQLBuilder < / police > to < police = "Courier New" > Oracle < / police > for this database does not work due to differences in the syntax.
  
  How am I supposed to get this working correctly? I don't know why she is doing this. Maybe it's something in the definition of the entity? I hope you can give me an overview of this issue. Thanks in advance.

  Update now seems to work fine with your suggestions! However, I get an error when you remove lines

  This is another bug - the buildDeleteStatement (...) method does not add the non-key columns in the WHERE clause, but the bindDeleteStatement (...) method binds the values (slots parameter SQL does not exist). Unfortunately, there is no easy way to work around this bug (generalizing the method of buildDeleteStatement (...)) because he would need to access the protected and package the methods of the classes EntityImpl and EntityDefImpl (which is not possible to a custom class SQLBuilder).

  However, you can override the bindDeleteStatement (...) method for not linking the prepared SQL statement nonkey attribute values:

  package model;
  
  import java.sql.PreparedStatement;
  import java.sql.SQLException;
  
  import java.util.HashMap;
  
  import oracle.jbo.Transaction;
  import oracle.jbo.server.AttributeDefImpl;
  import oracle.jbo.server.DBTransaction;
  import oracle.jbo.server.DBTransactionImpl;
  import oracle.jbo.server.EntityDefImpl;
  import oracle.jbo.server.EntityImpl;
  import oracle.jbo.server.SQL92SQLBuilderImpl;
  import oracle.jbo.server.SQLBuilder;
  
  public class CustomSQL92Builder extends SQL92SQLBuilderImpl
  {
    public static SQLBuilder getInterface()
    {
      return new CustomSQL92Builder();
    }    
  
    public int bindUpdateStatement( EntityImpl entityContext,
                                    PreparedStatement stmt,
                                    AttributeDefImpl[] cols,
                                    AttributeDefImpl[] retrCols,
                                    AttributeDefImpl[] retrKeyCols,
                                    HashMap retrList,
                                    boolean batchMode) throws SQLException
    {
      int bindIndex = super.bindUpdateStatement(entityContext, stmt, cols, retrCols, retrKeyCols, retrList, batchMode);
  
      DBTransaction trans = entityContext.getDBTransaction();
      boolean isLockOptUpdate = (trans.getLockingMode() == Transaction.LOCK_OPTUPDATE);
      if (isLockOptUpdate) {
         bindIndex = bindOptUpdateWhereClause(entityContext, stmt, bindIndex);
      }
      return bindIndex;
    }
  
    public int bindDeleteStatement(EntityImpl entityContext, PreparedStatement stmt)
       throws SQLException
    {
       int bindIndex = bindWhereClause(entityContext, stmt, null, 1);
       return bindIndex;
    }
  }
  

  The disadvantage of this approach is that UPDATE operations will be a 'optupdate' impementing - approach, but DELETE operations will implement a standard non - approach "optupdate". Hope agree you.

  Also, is this a bug with the updating and deleting lines fixed in more recent versions of the ADF?

  These bugs are not resolved in more recent versions of ADF, the new ADF versions have the same problems.

  Dimitar