Reset the system configuration resets the lock for disabled mode?

Similar Questions

• Y at - it a recovery disk, we can purchase for the X220T for UEFI mode?

  As my topic asks,

  Y at - it a recovery disk, we can purchase for the X220T for UEFI mode?

  Given that normal disks only works for legacy mode (btw, he correctly aligns the recovery with the SSD partition?).

  Your comments are very much appreciated!

  There is no recovery for X 220 UEFI disk (or any system of Lenovo currently-shipping).

• Web client - System Configuration node displays 'Unknown' for the Uptime and the workload, no value for IP & Hostname

  When I connect on our vCenter 6 Update 1 device (embedded PSC) via the Web Client with integrated Active Directory ID, select "System Configuration", then select the node for vCenter, summary screen displays all the information IP or host name.  In addition, the status of availability and workload for storage/memory/swap/load of work view all 'unknown '.  See attached photo for reference.

  All values under management-> settings are also empty.

  When I login with [email protected], all the above values are displayed and I can change the settings of the device of vCenter as expected.  This made me suspect a permission problem exists, but I cannot know what SSO group to add our AD is less to enable management or control of the aircraft from vCenter for that it works as expected.

  Already tried to add our accounts to the following groups in SSO under the vsphere.local domain:

  DCAdmins

  SystemConfiguration.Administrators

  ComponentManager.Administrators

  Directors

  This information on the purpose of each group unfortunately did not help me understand which could apply:

  Groups in the field of vsphere.local

  Thank you very much for the help!

  I just did some digging on this myself (we deployed now U2 6.0) after I tried the same things (adding AD users in the SSO domain groups, etc. etc.) without success.

  What I have found is that it is simply a WELL-KNOWN PROBLEM with 6.0 U2 and maybe they'll fix with U3 6.0 when that comes out (later this summer)?  Maybe it'll be 6.5 at that time, with an announcement to the VMworld 2016 or something - who knows.

  The workaround is a joke--suggesting the deployment using only the SSO domain by default.  Well, which is never going to happen naturally, so he says as a workaround is, if you really need to get and display status, etc. from the web client, you simply connect with your [email protected] account that was created at the initial time of installation.

  VMware vCenter Server 6.0 Update 2 Release Notes

  *****

  Failed to configure and view information about the vCenter Server Appliance by using the System Configuration page in the Web Client vSphere with errors
  Connect to the instance of vCenter server in the vCenter Server Appliance with a user who is located in a custom name (different from the default vsphere.local) Single Sign-On the field by using the Web Client vSphere. On the vSphere Web Client home page, click on the System Configuration and select nodesunder the System Configuration. If you try to change the settings, restart or power off a node of the vCenter Server Appliance, the operation fails with one of the following errors: An internal error has occurred - Error # 1009 and Not authorized to use this API . If you click on the summary, monitoror Manage tabs, some device information cannot be displayed.

  Workaround: deploy the vCenter Server Appliance by using the domain of Single Sign-On by default: vsphere.local.

• Is it possible to collect the lock by SDK mode attribute?

  Hello

  Is it possible to recover the locking mode of an ESXi host attribute using the SDK?

  This option is available in "Configuration - & gt; Software - & gt; Security profile", when connected using the VI Client.

  Thank you

  Praveen-

  Yes, I think you can get that by looking at adminDisabled http://www.vmware.com/support/developer/vc-sdk/visdk400pubs/ReferenceGuide/vim.host.ConfigInfo.html that I don't have access to my lab to check, but I remember this up a while back and I think that this indicator tells you if it is enabled/disabled. I do not believe in the current API you can right/turn off the lock mode, must be made via vSphere Client or by using undocumented API call enableAdmin/disableAdmin

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Open the menu for Safe Mode screen, system know last good config., ect.

  I just lost everything on my computer and had to install the original disc for windows XP, now system hangs in the screen where you can choose Safe mode and you should just let it keep trying its own fund it finally starts because if you choose it will freeze and do nothing as now its saying that the browser must be updated , but when I tried to update IE8 it said that 'the procedure entry point not found SHRegGetValueW in SHLWAPI.dll dynamic links library' Please help.  All the disks are origional disk, Gateway computer, version of Windows XP Home Edition 2002.

  Hello

  I suggest make a SFC (System File Checker) scan on the system and check if the problem is resolved. Follow the steps mentioned in the article below.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Once you did check SFC scan, you are able to download Internet explorer on the system and the installation and check. Download internet explorer 8 on the system from the link below.

  http://www.Microsoft.com/Windows/Internet-Explorer/worldwide-sites.aspx

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• cfgbackup for the locking to low mode

  Hi all

  I could make using without locked mode, now, I have activated the blocking position, the backup mode and we must continue the backup, I could do while the server is in locked mode? I mean using vcenter cross / access?

  Thank you.

  With Set-VMHostFirmware you do not specify a file name, but just the path to use.  The backup process will generate a file name as configBundle - esx01.mishchenko .net .tgz. If you are automating this process that you can rename the file once it has been created.  When you use the command to restore a backup, you require a specific file name.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• What is the best for sleep mode Mac or a stop?

  It's really important if you let just sleep mac between uses or stop the mac downwards best for overall computing?

  It's fine to let him sleep. It's what the designers wanted.

  In addition, your Mac love to dream...

  C.

• How to integrate the fix for xp mode?

  Try to use the mode of windows xp with Windows 7 pro sp1. Found that my processor AMD 8 was not compatible. Then I found the 2519949 of the article with a link to the fix. Downloaded and it self extracted. Has not fixed the problem. The article received instructions (install the OPK (OPK) Windows 7 SDK).

  Is there another way to make this fix work? Maybe a simple and easy way?

  Hi muddy78bronco,

  Follow the steps in the link:

  http://Windows.Microsoft.com/is-is/Windows7/install-and-use-Windows-XP-mode-in-Windows-7

  http://www.howtogeek.com/HOWTO/10911/run-XP-mode-on-Windows-7-machines-without-hardware-virtualization/

• How to ignore the password for enable mode prompt.

  Hello

  I just installed ACS 4.1 (first time working with ca). Everything works great and I use the internal database of the ACS to authenticate users.

  The question I have is this. Connecting to a router, making authenticating to the ACS server, is there a way around the duty enter my password a second time to get the mode?

  Currently, I have to enter my username and password to connect to the router, and when I go to activate the mode, I have to get my password again.

  Any help is greatly appreciated.

  Thank you

  Tony

  Hi Tony,.

  Mark this thread as resolved, so that others can benefit from.

  Thank you

  Prem

• Why the latest version has removed the padlock for sites that require a login?

  It takes too much time on the high speed cable, to log my banking online. My body's response was that the latest version of Firefox had removed the icon of the lock for sites that require a connection. I want to know why it was deleted.

  The padlock shows only that there is a secure connection and does not guarantee that you are connected to the right server. So you could always be connected to the wrong server if you make a typing mistake in the URL and someone said that mistyped the URL. The lock feature has been replaced by the identity button of the Site on the left end of the address bar (address).

  https://support.Mozilla.com/en-us/KB/site+identity+button

  http://www.mozilla.com/en-US/firefox/security/identity/
  

  This has actually existed since Firefox 3.0

  If you still want a padlock icon also then

  https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/
  

• Remove the lock on all files and folders...?

  There has been a lot of questions on how to remove locks on folders and files on Windows 7. Those I've read on this site worked and the lock can be removed easily.

  ... However, you cannot do a folder/file at once. I have a lot of items on my desk, and more than half of them have these locks on them. How I removed the locks on all files and folders on my user account. There are only 2 accounts on the computer. Mine and another person. Mine is set to the administrator account, the other is just a standard user. I started by ignoring the locks for months, then I tried to get rid of them by myself, and frankly, I have no idea what I'm doing. Please, I beg you. If you know of a way, share it!

  If the locks would not constitute an obstacle to operations, why bother?

  And BTW, it; s no need AT ALL to run as an administrator on a daily basis in Windows 7. Forget everything THAT you have learned about XP - Win 7 is much more advanced.

  You realize that the built-in Administyrator account is disabled by default, and if it is possible for him, that may be beyond what you're comfortable with?

  Create another Admin account, call the Admin or Tech or similar and give it a password. Let this accouynt for the elevation of access and privilege of emergency and activate your account for daily use in a Standard user account. Your computer will be safer that way.

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
  My Blog

• I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

  I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

  Sorry, but the restriction password cannot be reset, it is part of the backup and restore a backup that was taken after the restrictions were activated, restore this code again.

  You will have to start without the help of the data backup, configure the phone to factory settings and start over. Follow the steps mentioned in this article:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  If you lose or forget your password restriction, you must erase your device and then put it up as a new device to remove the restriction password. Restore the device by using a backup does not delete the access code.

  copied from: Sur les Restrictions (parental control) on iPhone, iPad and iPod touch - Apple Support

• Need to reset the password for the administrative account on XP

  Original title: how to reset Login password in windows for Adim...

  Not able to log in as an administrator. to set up the schedule for Defrag and clean system.  Thanks for the help...

  Hi Jeffrey,.

  Welcome to the Microsoft community!

  You are unable to log in with the administrator password.

  You can reset the password with a password reset disk.

  See method 2 on the site:

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

   

• Password reset disk error - "year error occurred while the wizard attempted to set the password for this user account.

  Hello!

  -A bit of background: the desktop PC that I use is Windows Vista Ultimate Edition, with active user accounts total five. I have my own account, and I can access the computer through (or through account from my brother, because I know its password).--

  I had this problem recently came where the administrator password (that I know for a long time and never changed) no longer works. So, after some research, I created a reset password on a USB disk, that I found in my house. I managed to create the disc, but when I tried to put the new password, I got the message error "an error occurred while the wizard attempted to set the password for this user account', which I must say is not very clear. I found a few methods of force - reset the password for the account of the admin, as using a sort of Windows Vista DVD or go to Safe Mode to find the hidden administrator account... but I have no idea what this DVD is or where to find, and in Safe Mode, there is no account user administrator to be seen. I believe that my machine is corrupted, but I don't want to buy a new. I want just to reset a password...

  Any help is appreciated. If I was not specific enough, I can specify in comments.

  Thank you!

  Hello

  You must make a password reset disk before that there are problems with a password, not afterwards.

  ________________________________________________________________

  Read this for your problem:

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  _____________________________________________________________

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• How to reset the password for cisco DMM 5.1 equipment machine

  Dear all,

  I have a cisco DMM 5.1 with some players installed on it, I can connect to the multimeter Digital 5.1 via web browser, but I can not connect the hardware directly using the console, I have not the password for access to the console, could someone please help me reset the password for the server of physica cisco intact DMM 5.1 keeping data and configuration on the server. ?

  
  

  Help, please!

  Dear Fahad,

  If you have lost your 'admin' password, it can be recovered using the account "pwadmin" as shown in the following link:

  http://www.Cisco.com/en/us/docs/video/digital_media_systems/5_x/5_4/DMS/AAI/Administration/Guide/pwadmin.html#wp1079466

  If you have lost your password to "pwadmin" so, you will need to open a TAC case and get an ISO image of "DMS pwadmin 5.1 reset" through TAC. You can then start the machine with the CD provided to reset the password to "pwadmin", and then sign in as 'pwadmin' and reset the password "admin" was from there.

  Kind regards

  Marco