iPhone not connect incoming calls - VERY serious situation 6s

Similar Questions

• Could not get incoming calls on iphone 5

  iPhone NEW pay-as-you-go SIM CARD USED, all SET UP BUT can NOT GET INCOMING CALLS

  Contact your operator.

• Can not see incoming calls when the iPhone is locked

  When my iPhone is blocked I don't see if there are messages or incoming calls. It isn't anything like that before.

  Thank you

  check the tools on your phone

• SPA112 does not receive incoming calls

  This a a new SPA112 set up for RingCentral in the USA (www.ringcentral.com)

  I can make outgoing calls. I can receive incoming calls if they are for a short period after an outgoing call - I care, but after a longer period, the phone does not ring on incoming calls. If I make an outgoing call then I can receive incoming calls again for a short period. So it seems that some timeout in game. I spent hours with the support of RingCentral and they can't figure it out - they said now they give me is no longer supported. They sell the SPA122 (which is essentially the same device) so I don't see why the SAP112 will not work.

  A log file is attached. There are 3 calls, 1 call is a call that didn't go off, call 2 is a call out, call 3 is a call that rang.

  SPA112 122 using the same firmware, so has the same functionality with regard to phones. The 122 has just an extra ethernet port you can connect between your modem and your router (or computer).

  It seems that you lose your registration to their servers. I say that because there is nothing in the paper to suggest even the first call made to you. In addition, when you try to make an outgoing call, you get a "407 Proxy authentication required" back, which means their servers doesn't know who you are. Once you authenticate, the call passes by and you are registered and can receive calls, until the registration expires.

  Under the "line 1" (or 2 as the case my be), under "Proxy and registration", make sure that 'Register' is set to 'Yes'. "." If it's already like that, check the value of "record expires. This is the number of seconds between records. I have mine has 180 (3 minutes). But you can try lower values, even 30 seconds and see if it makes a difference.

• BlackBerry Z10 z10 does not answer incoming calls

  I have a new weird problem with my z10 (my only question until now). When an incoming call arrives, the screen goes to the PHONE application and freezes there. I can't do anything to answer the call. Then, when the person leaves me a voicemail, I can not the keyboard seems to get my voicemail password. The screen is still frozen on the PHONE app page. I can close this app, but the call remains open and if I click on the call (at the bottom left of the screen), it simply goes back to the PHONE app page where I can't press anything or do anything except by scanning up to close the application.

  Did restart you the device by removing the battery?

• Can not answer incoming call

  Hello

  I have a problem with answering incoming calls on my xperia z5. When someone calls me and I type "answer to" the end of the call instantly to 0:00. But when I have someone phone everything is OK. Is there some settings to do something with it?

  Thank you

  You meet him even then on safe mode?

  How to start safe mode
  http://talk.sonymobile.com/T5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008

  How to boot mode safe on Lolipop
  1. press and hold the power button
  2. Once you get the context menu
  3. press and hold "power off".
  4. boot in safe mode should become available

• BlackBerry smartphones can not answer incoming calls

  I "missed" between 20 and 25 incoming calls within the last two days. Whenever I get a call in an application, portrait/landscape, laying on my desk, sittin in the home, in the menu screen, or in my pocket, I begin to see the incoming call, hear the ring tone and press the green button. (I tried using the tactile response option as well) and then the clock that spinning hourglass or anything like that for the following 30ish seconds and shows my storm is completely insensitive. I tried to play with almost all the parameters relating to appeals, sounds and contacts, and I left the phone to die on its own of the lack of resources, pulled the battery and it turned off manually. can someone help me with this please?

  Phone info:

  Carrier Verizon

  BlackBerry 9530

  Smartphone (3G, CDMA)

  v4.7.0.148 (4.0.0.181 platform)

  The kernel v3.8.5.51 encryption

  Brand version: 1.0.105.16

  Mounting microphone configuration: CLDC-1. 1

  Micro Edition profile: MIPD - 2.0

  Micro Edition JTWI Version: 1.0

  "" Media Version: 1.1

  "" PIM Version: 1.0 "

  "" File Version: 1.0

  "" Bluetooth version: 1.1

  "" Location Version: 1.0.1

  After I went through and remove applications standard verizon and blackberry Messenger, that it helped a bit and I realized an hour I still had almost all of my applications open, ago I used the option to switch application and actually closed everything and it works perfectly now.  Anyway thanks, bifocals, for your willingness to help.

• The phone rings does not for incoming calls! / spa2101 connected to the router

  Hey guys,.

  I had this problem for 2 weeks now, my outgoing calls are fine but with the receipt of custom just phone sounds sometimes. He usually works once I restarted the adapter, then after an hour on the phone used ring when I test it.

  I opened the ports on my router (5060-5061) and the firewall is disabled.

  BTW: I have this software called xlite and when I tried to call for that, it worked fine but the phone did not respond. im guessing theres some configurations that must be accomplished, but what is the question =)

  Thank you for any response

  Hello

  You must change in the line-1/2 tab:

  NAT mapping enable: don't-online Yes

  NAT keep alive enable: don't-online Yes

  Then, you can control the interval keepalive on SIP tab:

  NAT Keep Alive Intvl: (def = 15)

• BlackBerry smartphones HELP! The screen of my blackberry 8310 does not indicate incoming calls, or it sounds-

  Help, please!  It's Christmas and I'll be staying NJ in Los Angeles, my phone will not ring all of a sudden and the screen does not indicate when a call comes, also not get the notification sound when I get a text message, so now I can't even tell when my phone rings, even if I am looking at him - even for a text message I've checked everything and it's normal and active - my carrier is AT & T - someone ' one knows what's the problem?  Thank you very much!

  Please mark the thread has been resolved, it is better to other users with the same problem

• Intel pro/wireless 2200bg will not connect or is very slow

  I just do a fresh install of xp pro and my intel pro/Wireless 2200bg has no connectivity.  I downloaded new drivers, but nothing works.  I bought an external card of bg and it works perfectly.   I have a thinkpad t43.  All downloads came from levono or intel.  What can I do?

  Hi TimWiegel,

  You can run the Intel® Wireless troubleshooter from this link & check if the problem persists.

  http://www.Intel.com/support/wireless/WLAN/sb/CS-025779.htm

  
  Reference: Why am I not able to connect or stay connected to my Wi - Fi network?

  Hope the helps of information.
  Please post back and we do know.

• Name of the Contact of Smartphones blackBerry only showing no not on incoming call

  When a call comes in, only the phone number is displayed, not the name of the contact, even if contact information is entered in my address book. I just can't understand what setting will be changed. I'm new to Blackberry and it was SOOOOO frustrating. Thanks in advance for any help you can give me.

  Try this: when the device is turned on, remove the battery, wait 1 minute and turn the battery on the device.

• Incoming calls mute after updating iOS 10.0.0.2 iPhone SE

  Hello

  After the update of 10.0.0.2, I saw a strange problem on my iPhone SE:

  • Incoming calls appear to be muted 2 ways (the two of us don't hear)
  • The speaker and mute icons on the screen looks normal (non-active)
  • When pressing the speaker icon 2 times (the first time it activates the "speaker" icon, but not the President himself, the second time, it disables the icon) all works fine again.

  It's the same when you use the standard helmet.

  A reboot seems to fix my problem for 1 time. But after that, the problem returns.

  I could not find any related problem, so maybe I'm missing some (new) settings?

  Any help is greatly appreciated!

  Peter

  Hi Montfrooij,

  Thank you for using communities of Apple Support. From what you have said, it seems that you are not able to hear a person during a call on the iPhone. Looks like you already have a troubleshooting.  I recommend you to read this article, it may be able to help solve the problem. You can also check that the iPhone is not connected to a headset Bluetooth, the sound of routing to that rather than the receiver.
  

  If you do not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone - Apple Support

  See you soon.

• Can block incoming calls from a number?

  We used the blocking calls in the Manager of administration to block some outgoing calls - 900 numbers, 976, etc.. I guess it works. The question I have is if it this or something else can be used to block INBOUND calls. For example, we received, shall we say, a vulgar call. We do want to hear from the appellant in the future. I tried to add my number to test, but I can go very well.
  Based on the documentation, it is not clear to me that it does not block incoming calls.
  Enter a phone number or a model block. For example, to block all calls to the
  858-410-1600 number, enter the number as indicated. It blocks only calls
  place to the specific number is entered.
  Thus, this part specifically calls 'to' this number will be blocked. No mention of calls from this number.
  But then, you can check the box "Outgoing call" to block outgoing calls...
  Check this box to prevent the agents or the Call Center On Demand
  system of automatic reminder to place calls to numbers corresponding to the model
  you have specified. Clear this check box to allow outgoing calls to the numbers corresponding to the
  the model.
  So, why bother with the call-out if adding box it blocks calls to a number (or model) in the first place?
  But, to my immediate problem - then - I block incoming calls?

  To block an incoming call, follow these steps:

  1. create a routing pattern prefix is the number you want to block. One of them will be created for each number block unless you use the AFN or NXX and a wildcard.
  2. create a prefix in the routing group that includes the Microsoft Routing prefix model you just created.
  3. create a new project (or campaign) Menu.
  a. place the default link to disconnect. (You can play an audio first if you wish).
  4. create a new project.
  a. allow a phone project, but do not assign a DNIS.
  b. route all calls to this project from the project Menu has created...
  5 blocking occurs at the level of the project. If the number to be blocked for more than 1 DNIS, make the following change to each of the projects.
  a. open the project in question, and then click the phone tab.
  b. click the routing of Prefix tab and activate the prefix routing.
  c. Select the prefix for the created routing group and that it points to the new project.

  Alternatively, you can make the call blocking since in a campaign, but this requires that each time a new number must be blocked or unblocked, we need to make the change. By using the above steps, the client can add/remove numbers.

  Dave Shuger

• iPhone 5 s to connect with blue tooth in the car for hands-free calling does not connect to the speaker, it works very well with the iPhone 5. How to solve this problem?

  IPhone 5 IOS 9.2 (13 c 75) I can log in my car with Blue Tooth to make phone calls, but it does not connect to the speaker. To establish the connection with the car, the procedure has been completed correctly. With the iPhone 5 it works perfectly correct.

  How to solve this problem? Is there someone who has the same problem?

  Howdy,

  Thank you for using communities Support from Apple.

  I see you try to get your iPhone to interface with the stereo in your car via Bluetooth.  For setting this up, please follow the steps below.

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon.

• How do I stop sharing incoming/calls recent calls on my OWN multi iOS devices (iPhone 4 6) connected to WiFi even with same OWN Apple ID

  I have iPhone 4 devices 6 sim cards from different countries and of course with my own unique Apple ID and while that for WiFi connections even all devices begins reception even incoming call and ringing all at the same time! In addition the recent calls log will be showing that the calls or calls missed on all devices! … I changed hands and face time and sharing on all devices... but still the same problem any feature that really boring case and mix up my call logs.

  Who told you that it is a feature... OK... I respect your reply and my answer to you that I have the right not to have this great feature on my own multi devices which of course, I use only my same apply id on each of them and I'll connect them all to the same WiFi. then please underestimated that a function can be turned off or the user-controlled means it is not a feature and its name called (BUG)

  I wish I can hear other users with iOS multi devices if they are in need like me do not have any sharing between their devices with their own single apple ID mainly iPhone devices in WiFi even or even not even WiFi... with respect now, it's a problem for a few months and still not resolved and people continue to fight on this issue.

  Thank you

  Osama

  Osama.Hamaydeh wrote:

  Who told you that it is a feature... OK... I respect your reply and my answer to you that I have the right not to have this great feature on my own multi devices which of course, I use only my same apply id on each of them and I'll connect them all to the same WiFi. then please underestimated that a function can be turned off or the user-controlled means it is not a feature and its name called (BUG)

  If you share an Apple ID, call logs will be shared. Some people have reported success to stop this behavior by turning to iCloud by car. If you need this feature, you're stuck with the sharing of call logs, until Apple decides to change the way the phone works. Just because you don't like not the feature does not mean that it is a bug. It simply means that this is a feature that you don't like.

  Submit your Apple here:

  http://www.Apple.com/feedback