Iphone6 unsuccessful Bluetooth

Similar Questions

• BootCamp + Windows 8.1 and Windows 10: trackpad and keyboard bluetooth always unsuccessful pairing

  My computer is a model of end 2011 of 13-inch MacBook Pro. I use an external 27 "monitor and bluetooth trackpad and keyboard. Until the last week of July, 2016 that I used with Windows 8 with BootCamp 5, nicely. Then I got a message that Windows 8 would be not updated for critical and security updates. I decided to upgrade to 8.1 Windows but the trackpad wireless works intermittently, and the wireless keyboard is not working at all. I get a message to pair, but the pairing is always unsuccessful. Then I upgraded to Windows 10 and the same problems with wireless keyboard and trackpad.

  Does anyone have a solution? Thank you

  You can try this. UN-pair external Apple Trackpad and keyboard on the side OSX, pair it with test first, and then pair on the side Windows OSX.

• iPhone6 more WiFi and Bluetooth failure

  I have a problem

  Failure of Phone6 more WiFi and Bluetooth?

  https://youtu.be/JHom1urrwo4

  Take a look at this Apple Support article:

  https://support.Apple.com/en-us/HT204051

  Reset your network settings.

  Settings - general - reset - reset the network settings

  Reset your device. This will not erase your data stored on the phone.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• iOS10 Bluetooth is not pairing with UConnect

  I can't get my iPhone or any iPhone iOS 10 to pair via Bluetooth with my Jeep and the UConnect system.  My iPhone 6 after upgrade to iOS 10 connect to UConnect system as it always had.  I've recently updated for iPhone 7 and now I can't get my new phone to pair with the car.  I tried to connect other iPhones in the House running iOS 10 that were never originally paired with the Jeep as well and they all get the same error message "unsuccessful Pairing - Make sure"Uconnect"is turned on, in range and it ready to be paired.  The iPhone sees the Uconnect as a Bluetooth connection, but is not pair.  UConnect system running their most up-to-date version of the firmware 16.16.13.  Any suggestion would be appreciated.

  Hi there, HuskyDog94.

  I see that you are not able to match one of your iPhone on iOS 10 with your Jeep uConnect system. I like to use my hands free iPhone and I'll be happy to help you!

  Help to connect your iPhone, iPad or iPod touch with your car radio - follow troubleshooting steps under the heading "If you use Bluetooth.

  Thank you for using communities of Apple Support and take care!

• Bluetooth & waterproof Airpod to water

  Hi all, I have two questions about the new airpod.

  First of all, be impervious to water as the iPhone7 and watch series 2?

  Second, will they use the standard bluetooth to connect to the iPhone. Today, I can't use bluetooth headphones when viewing a movie because there is almost a second a delay between the sound and the image (I have an iPhone6 for now). This will be the same with an AirPod?

  I hope someone has the answer to do this, thank you for your help.

  Hello

  Airpod are not watertight.

  Airpod connect to the iPhone via Bluetooth. When using them, avoid a second delay. If you encounter problems, contact Apple technical support or make a Genius Bar reservation at the time wanted to for assistance.

  More information:

  http://www.Apple.com/Airpods/

• Bluetooth transfer

  Where to find the files on the iPhone6 transferred via bluetooth of Windows system?

  iOS does not transfer files using bluetooth.

  Bluetooth is supported for stereo headphones/speakers, hands-free phone

  devices/headsets, some keyboards, some peer-to-peer applications from the app store and

  Internet tethering where provided by the carrier.

  Apart from that, it does not connect to a computer/phone/device.  (Thanks to ckuan for the formulation)

• Simultaneous connect via Dock and via Bluetooth?

  Forgive the newbie question, but I use my Iphone6 to connect to my stereo system through a dock and also want to connect via Bluetooth to a speaker in a room? This can be done? Thank you!

  # You can only select an output for the audio stream. You cannot output audio to the dock and bluetooth connector at the same time.

• AirDrop does not and the bluetooth does not connect to the macbook pro

  Hi, I have an iphone6s and a macbook pro, release used to work before, but now it is not. I think it's probably because I can not connect my macbook on my iphone via bluetooth which is something that probably dump uses.
  Does anyone have any suggestions? He used to work before.

  My iphone 6s is 9.3.2.

  My macbook is on 10.11.5 (15F34).

  I tried to restart my mac and reset my Iphone. I also tried to delete the file com.apple.bluetooth.plist.

  I also tried to disable the bluetooth and turn back on for both devices.

  My airdrop is already set to "everyone".

  Sometimes, it is not even discover my mac on my iphone even if I discover my iphone on my mac. When I try to pair, this is for me the pair prompt on my iphone and I click and it goes to 'Connected' and then back to "not connected".

  And that's fine if I can't connect my iphone to my mac via bluetooth, I want just the parachuting of work.

• GPS Gone, shooting, the Bluetooth WiFi range doubtful after 9.3.2

  I have an iPhone6 which is maybe 1 1/2 years old on and worked perfectly all the time until a few weeks ago. Seems as if after 9.3.2,and my GPS no longer works and the scope of my Bluetooth is about 3 feet.  I did the reset, the new phone set in place, and a visit to the Apple store and nothing worked. Not on the point of paying $299 for ship away for repair and its not in warranty. Are there other options? I will probably update in the fall, but don't want to go all summer with a phone working partially since I rely heavily on Bluetooth, GPS and WiFi. The phone is a fitness fantastic and lived his life in a good deal, so I can't that suspect update did something weird.

  If you choose the out-of-warranty service, the replacement unit is also covered by a 90-day service warranty period.

  Warranty repairs are considered when:

  • Your iPhone is more than a year
  • Your iPhone has a problem that is not covered under warranty right or the consumer, like accidental damage or damage caused by unauthorized changes

  We may be able to repair or replace your product with a warranty. Your replacement iPhone will be new or equivalent to new in performance and reliability. The limited Apple warranty is in addition to the rights provided by the law of the consumer.

  See Apple fresh off-warranty Read Apple's limited warranty How to repair Apple read

  copied from: iPhone response Service - Apple Support

• Notification by email to the phone and not headset/Bluetooth Headset

  I have an iPhone6 and whenever my bluetooth headset is connected, my notifications by e-mail through the headset and not via the phone.  I need to call to keep giving me the notification and send it through the headset.  Often, I have my phone and the headset on my desk and will not hear the notification.  I'm pretty sure I could change this once, but can't remember how.

  Maybe you have active AirPlay? Swipe up from the bottom of the screen to display the command center and ensure AirPlay is disabled.

  How to use AirPlay on your iPhone, iPad or iPod touch - Apple Support

  Also, go to settings > general > accessibility > routing of Audio calls > and set it to automatic.

• cannot pair bluetooth for iphone 6 s

  have just updated our iphone6s phones now the phone does not connect to any Bluetooth legacy, we have always used a blueant Bluetooth headset on our other iphones, but they do not connect to the iPhone 6 s

  You may need to reset the BlueAnt. I use a Q2 and have no problem with my iPhone 6s using iOS 9.3.1. Check the instructions for the headphones and do a reset. After that, put the device in pairing mode and you should be able to connect to the iPhone.

• Satellite L750 - Bluetooth does not work after BIOS update

  I am preparing some L750 notebooks for use and accept updates from the Toshiba, which included an upgrade of BIOS v1.70 for v2.00. He appears after this update occurs that Bluetooth no longer works, i.e. try to install Bluetooth Toshiba stack will fail as it is said that the Bluetooth radio is disabled and must be turned on for continue.

  As the L750 (model PSK1WA-0C300R) is not a hardware switch to enable or disable the Bluetooth/Wi-Fi, the only option available (Fn + F8) is unsuccessful. I ran a recovery of factory default installation and Bluetooth still does not - resumption of classes does not restore the BIOS to the previous version. I have 5 of the model and confirmed the update of the BIOS is the cause. Two laptops now have v2.00 and Bluetooth has been tested in the work before the update of the BIOS.

  If Bluetooth is not critical for the environment which I deploy these notebooks, it's an annoyance I want to solve. My questions are: has anyone encounter the same problem and managed to resolve it? Is there a BIOS v1.70 available for download to restore the functionality? Y at - it an update of the BIOS > V2.00 for solve the problem I have? Thank you.

  Hi JasonL750,

  Load default settings after updating the BIOS? Go into the BIOS, press the F9 key to load the default settings of the installation. Also, make sure that Bluetooth is enabled in the BIOS if there is such an option.

  In addition, it would be interesting to know what happens if you use the FN + F8 key combination. Don't you see that he has an option to turn on Bluetooth and if so what happens if you do this?

• Unable to connect the iPhone to my work 6 to 2 (portable) via Bluetooth.

  Hello.

  I had the two work 15 "MacBook Pro (retina, early 2013) Mac OS X v10.10.5/Yosemite) and 64 bit W7 EE SP1 to a Thinkpad Lenovo W530 to pair with the iPhone to work 6 (iOS v9.3), but they do not connect. The iOS from iPhone Bluetooth said no "connected". I want to just copy my files between each image.

  Connection of Mac OS x before trying again to 64 bit W7. If I click on the name of his MacBook, it said "unsuccessful connection - make sure that 'computername' is active and within reach. Mac OS X says 'Not connected' to 'iPhone 6"working device. Double-click on "network is unavailable. Make sure that network access is enabled.

  W7 64 bit, I say its Bluetooth and find matching the iPhone detected 6. I see the iOS device. Yet once, "not connected".  HOWEVER, it says "Connection failed"ComputerName"is not supported." and forget this device. WHY?

  Why orders wireless is so difficult? USB cable was easy.

  Thank you in advance.

  This has never been a feature of the iPhone/ipad/ipod

  I'm sorry.

  Bluetooth is supported for hands-free phone features, speakers/headphones, some keyboards a few apps from the app store and the interest of home - if it is provided by the carrier.

  It doesn't connect to other phones, computers

• Satellite C660-1TE - bluetooth driver missing/no works

  Hello

  Model: C660-1TE.
  OS: Windows 7 32 bit.

  All of this work. Only bluetooth and touch pad has lack drivers or does not not perfectly.

  Bluetooth: well I've worked to get bluetooth works for a long time and I have to do without success.

  I found some drivers but these seem to be wrong or does not work. The problem is that for this model there is no bluetooth driver or what operating system I use. I found these drivers looking for the model series to see if I can find some drivers of the company that makes this bluetooth but again unsuccessfully.

  So im required to get my bluetooth works and I need assistance to do so.

  Then press the key. It works fine but I have no scrolling or other functions that should be for this model (looking at the box where was the laptop inside.) Yet once, I was looking around to see drivers or the appropriate drivers for Tablet touchscreen but ended once again without success.

  This isn't a big deal, but at least I wand scroll, because its annoying if you have long site and you can't scroll down.

  Thanks if I get some answers!

  Hello

  > The problem is that for this model there is no Bluetooth driver or for this OS, I use

  Your laptop is equipped with an Atheros WLan / BT combo card.
  The software is available defitnialy
  You have to install is:
  (1) package of filter Atheros Bluetooth (available on the European driver Toshiba page)
  (2) Toshiba BT stack (available here http://aps2.toshiba-tro.de/bluetooth/)

  After installation, activate BT using Fn + F8

  > Then press the key. It works fine but I have no scrolling or other functions that should be for this model (looking at the box where was the laptop inside.) Yet once, I was looking around to see drivers or the appropriate drivers for Tablet touchscreen but ended once again without success.

  Drivers (also the touchpad) are on the page of the European driver Toshiba
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp
  You must choose the Satellite C660 PSC1NE.

  You can check the touchpad settings in Control Panel-> mouse-> tab advanced-> button Advanced settings

• Carplay works is not on my ios iPhone6 9.2.1 and VW Passat discover Pro 2016 GTE

  I tried to do everything to get my iPhone6 work with Carplay on the Discover Pro.

  Change of SIM card

  Bluetooth on and outside, unpaired etc.

  Reset iphone6 via iTunes and configured as a new iPhone

  Tried different lightning original apple cables, one provided by Apple support Netherlands

  Tried to reset the default settings of appconnect on the Discover Pro

  When I connect to an another iPhone6s it works immediately.

  tried the same settings of the 6s that does the work, although the iPhone6 does not work with Carplay.

  Here is a video of the process demonstrated that it does not work. After all of these options, I tried

  http://youtu.be/3ARj7osDfM8

  Apple support escalated the issue to support from apple engineers, a week ago, I called 2 times to get an answer, but they are always looking in what they say.

  I tried each much option of Carplay fans told me to try, but my ios 9.2.1 iPhone6 does not work with Carplay on the Discover Pro.

  and yes the discover pro is the latest firmware running and works like a charm with a 6s by using the original apple cable. But my 6 is not...

  waiting on the Apple support...

  I had this exact problem with my Passat from 2016. Searched the interwebs and finally found an easy solution. Hold the power button on your radio in the car down for 15 seconds until you see that he has adjusted.  Connect the cables and that is.