GPS Gone, shooting, the Bluetooth WiFi range doubtful after 9.3.2

Similar Questions

• wireless adapter is gone and the extension display not working after hibernation

  my laptop is a thinkpad X201s, os is windows 7, 32 bit, ultimate, English

  I used wireless home and my laptop is discharged, it is put into hibernation automatically

  the next day, I went to the office, plug power adapter and turn on the computer

  then I found wireless does not work, so I opened 'Control network and Internet\Network connections', there is no wireless icon. then I open "Device Manager", there is no wireless network adapter in network adapters

  and another bad thing is when I extend my screen with another monitor, the second screen shows nothing and the monitor does not work, it does not work in another computer, it seems necessary to fix. but it works before

  and I change a new monitor to connect my laptop display of the extension does not work, but the monitor can work in another computer, that's fine.

  and I restarted computer, no help.

  Finally I found the solution for wireless, first computer shutdown and plug-out the power adapter (it is very important), wait 30 seconds, then plug power adapter and restart the computer, wireless, great work

  now, the extension display function still does not work. I guess that the display extension PIN does not work, maybe need repaired

  Hi Jacky,.

  First of all we apologise for the late reply,
   
  As seems to be problems with the extension display port, I suggest you to contact the manufacturer of the computer.
  http://support.Lenovo.com/en_IN/feedback/contactsupport.page
   
  Please come back incase of any queries.
  Thank you
  Jayant.

• Signal strength and range of the latest wifi routers

  I have a big house, with my router (BT home hub) in a wiring closet in a laundry room. The House is wired for ethernet and my current Wi - Fi, a Netgear WPN802, is placed at the best discreet place in the House. It is quite visible from everywhere in the House, the signal is quite low in some places.

  If I replace it with a common Netgear router, switched to AP mode, I see a significant improvement in the strength of signal and the beach? Smartphones, tablets and streaming music boxes (Sonos) are the usual wifi customers.

  In general, with one exception, hand-off is controlled by the device. On devices where the roaming aggressiveness can be adjusted, usually of the laptops and PC with Wi - Fi cards, it is sometimes possible to do hand-off low impact, but it is often neither transparent nor without interruption. I walk often so, personally, that this is not a matter of my house with my laptop streaming.

  However, smartphones often do not have adjustable settings of roaming aggressiveness, but it is precisely the devices with which we want to transfer transparent. My old iPhone 5 was terrible to homelessness at home and at work.

  If you install a second WAP in your House, don't expect transparent transfers. But, as I said, it's usually to the device.

  I talked to an exception almost, and perhaps two. One is that there is a connection Wi - Fi standard 802.11r called which rudder hand fast shipment. I don't think that any consumer connection Wi - Fi gear to implement. Two is that Ubiquiti Networks offers an exclusive feature called discount zero where several Ubiquiti APs can work together in the hand-off a device between them. I don't know which of their products offer this feature, but my guess is that they are not cheap. The disadvantage of this feature is that all points of access must use the same channel Wi - Fi (they do all access points appear as an access point). It is not so good, if you have many Wi - Fi devices and need a lot of bandwidth. It is a compromise between speed and reliability.

  I would recommend that you try one of the higher end Netgears with external antennas. If you are happy with your current router and only need an AP, consider the EX7000. It is marketed as a wireless extension, but it is also usable as a wired access point. It'll be cheaper than the R7000. But if you want to improve your router, then the R7000 is an excellent choice. I have one and it covers almost my entire House, 2 storeys.

• GPS apps in the background

  I have an iPhone 6 s upgraded to iOS 10 the day it came out last week and I noticed that applications using GPS are failing in the background when several applications are in use. I ran to the Waze to check the traffic and Google Maps at the same time to check something on Friday and has noticed that if she was in the background would tend to turn off after a few moments. When I turn back, she will have to acquire the road again. I also have a Fitbit load HR, which uses the GPS on the phone via bluetooth to create a map of my route. I have it worked out with my usual Runkeeper app (which normally works perfectly) and noticed that Runkeeper would be closed after a mile or more. When I went to him to my podcast app after my race, Runkeeper would start up and missed the last two miles of my race. In addition, the road saved by Fitbit seemed jumped all over the place. I know that it is not unusual for GPS from blip, especially when moving through areas with weak signal or cell mutation or all through the streets of the city with tall buildings, but it seems that the problems have become more coherent. I have not tried to run with a single application to see if I have the same problem, but will try tomorrow. I used only a single app for navigation (Waze) yesterday evening and he seemed also to close after it is placed in the background for a while. Has anyone else seen anything like this?

  Hello alexhoward,

  Thank you for using communities of Apple Support. It is my understanding GPS apps do not work in the background, after the update to iOS 10. I use GPS every time I travel. I know that it can be crucial for applications GPS running in the background. I'm happy to help you

  I recommend first restart your iPhone. This can solve many unexpected behaviours. Follow the steps below.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  If the problem persists, reset your location service. This resets all settings at default location. Apps will be stop using your location until you grant them permission again. Go to settings > general > reset > reset the card and privacy. Here is some additional information on location Services.
  On privacy and location in iOS Services 8 and later versions

  See you soon!

• Airport Express does not extend WiFi range

  OK, I posted a long time will cost about an airport older Gen Express not extending my wifi range when implemented to extend (wireless) and connected to a network of Apple (Airport Extreme). No solution, so I gave up.

  Still frustrated by the lack of a strong wifi signal to my back door / Garden (it is a small house!), I bought a new Express and set it up again to extend my current network, placed it on my window sill back room (where I get a pretty good wifi signal on my iPhone and iPad), but about 6 feet of him, the other side of the glass in my garden I get a flicker of 1-2 bars the signal strength that is de-energized intermittently.

  I get no significant (or even vaguely reasonable) increase in force wifi when I approach from the Express, but increase next to the extreme.

  Or should I put either the express until properly (I'm sure I'm) or I am fundamentally misunderstand the term "extend a wireless network. Alternatively, I bought 3 years 2 defective Express apart.

  Can anyone help?

  See you soon.

  You have a handy Mac laptop? If so, we can run tests to understand the current quality of the signal at each location where you want to have a Wi - Fi access. If all goes well, we can find better place to place your Express extension for your goals of networking.

• time capsule airport lose wifi range

  I've been using airport time capsule as a router and machine time about 1.5 years and suddenly the WIFI range

  come fall, I use the modem cable HI Speed with 10 loading MB and 150 MB down when suddenly the speed dropped I still get 10 but only about 92 or less down, unless I use an ethernet cable that brings speed to 150 are lowest, (PS), I ran the on time capsule ethernet cable to my Mac mini so it becomes what should be diffuse but do not do a very good job more.

  question is there something that can be done to solve this problem everyone knows this problem, thanks for any help that can be provided.

  What exact model of the Time Capsule (TC) do you have? Given that the question appears with the wireless, you live in an area with a high concentration of other networks Wi - Fi? An apartment complex or a dorm maybe?

• Satellite P750: Impossible to install the Bluetooth Stack on Windows 7 (x 64) driver

  Hello.

  I own a * Satellite P750-02 t * (part No. * PSAY3A - T 02 001 *).

  In the order I did:

  (1) I formatted the HARD drive and reinstalled the operating system of * Windows 7 x 64 Ultimate SP1 *.

  Then I downloaded * ONLY the BIOS and drivers * of [his downloads page | http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25]:

  (2) I've updated the BIOS for * v1.90* (the laptop came with v1.80)

  (3) I have installed all drivers:
  -LAN and WiFi
  -Chipset Intel latest (available)
  -all video drivers (NVIDIA Graphics, Intel HD Graphics and Intel HDMI)
  -Card reader
  -Realtek HD Audio (later)
  -Synaptics Touchpad
  -USB3.0
  -IR
  TV tuner
  However, I * cannot install Bluetooth driver (v8.00.06 (T) *)...

  When I run the installation program of the [aforementioned page | http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] it detects partially *'Bluetooth USB Controller-10 TOSHIBA'* (USB\VID_0930 & PID_0215 & REV_001)
  and then the installation freezes simply displaying + "install the Bluetooth driver. Please wait +.' and stay like that forever...

  I also tried to download a driver [another location | http://aps2.toshiba-tro.de/bluetooth/index.php?page=download-toshiba] for laptops TOSHIBA - v8.00.02 (T):
  and followed installation instructions displayed under "Details".
  but he had the same result: the installer simply crashes...

  Install fix (* KB978258 *) recommended it did not work either - the message "+ update is not applicable to your computer +" appears.
  And I understand why - this fix is [already included: http://download.microsoft.com/download/E/B/A/EBA55FE2-373A-4351-9346-6D762B79AA69/Updates%20in%20Win7%20and%20WS08R2%20SP1.xls] in Service Pack 1 for MS Windows 7.

  I spent hours searching the Internet for a solution. Although there are some similar cases, none of the recommendations actually worked. I tried to install:
  -WiFi driver before installing the Bluetooth (someone suggested that these two are parts of the same card);
  -Repeat Mode Setup without failure;
  -* Toshiba value added package * hoping that somehow these tools will kick in.
  Nothing has worked...

  It is interesting to note that when, in the interests of experimentation, I tried to run installation for my generic Bluetooth adapter (using the driver [for non-TOSHIBA notebooks | http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]) then everything runs smoothly!

  * Using connection Bluetooth on this laptop is absolutely crucial for TI
  I hope that I won't get back this beautiful laptop as I know that TOSHIBA is one of the best manufacturers and I am sure, that there is a solution to this problem.

  Thank you very much.
  Evgeny.

  Post edited by: cardiovascular disease
  specified on the use of another generic Bluetooth adapter with non-TOSHIBA driver

  You can use the key combination FN + F8 to toggle WLAN?
  You can also see BT symbol there?

  Before you begin installation battery BT try to activate BT module by using the FN + F8 key combination.

  Generally avoid some problem with it. Toshiba BT stack is tested on al models proposed by Toshiba and fireplace installation BT has, in my view, nothing to see what version of Win7 you use.

  Do not return this laptop. It has to do is just install drivers, tools and utilities. Please note: BT stack is included in the recovery image so BT must work.

  Also, I must say that OS installation of drivers, tools and utilities on Toshiba laptop must / should be installed in the correct order. Many tools can work only and must be installed on basic stuff that can be installed with other specific tools of Toshiba.

  Please send a few comments if this FN + F8 will work.

• Laptop HP 15-r033TX: did not find the driver wifi for my laptop to windows 7 64 bit

  Hello

  I need help. I did find the driver wifi for my laptop for windows 7 64 bit. Can you send me a useful link.

  Thank you

  Hello:

  Here is the link to the wireless card driver you need...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131223-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0005

  You will also need the bluetooth driver...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_130390_1

• Satellite R830-182-Bluetooth/WiFi issues

  I had two problems with my R830 using the Atheros AR9002WB-1NG who are driving me crazy.

  First of all, I don't get by wifi download speeds when connecting to my BT Home Hub 3. I have BT Infinity (approx. 40Meg d/l) but I get only about half as in other laptops, the elderly are much much faster. The laptop R830 doesn't seem to connect to 802.11n but did to 802.11 g (54 Mbit/s) and there is no way to force it to do otherwise.

  Also, when I use a headset Jabra Bluetooth wifi disconnects after a minute or so until I turn off Bluetooth. It then seems to sugest that the laptop has lost security settings (which is not the case). All very strange.

  I've updated the drivers and battery bios etc etc, but to no avail.

  Any ideas please?

  Hello

  > Portable R830 doesn't seem to connect to 802.11n, but made to 802.11 g (54 Mbit/s) and there is no way to force it to do otherwise.

  Atheros AR9285 supports the standard 802.11 b, G and N, so you should be able to connect to 802.11 wireless network N.
  I recommend the options in Device Manager-> card WLan-> properties-> Advanced tab of audit

  Here, you have to choose 802.11 N

  > Also, when I use a headset Jabra Bluetooth wifi disconnects after a minute or so until I turn off Bluetooth. It seems to sugest that the laptop has lost security settings

  The Atheros Wlan card compatible with WiFi and BT
  By using the Fn + F8 key combination you can switch between WiFi and BT
  Please check

  In addition, you must make sure that the Wlan driver is up-to-date.
  The latest version can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/

• Apple makes a Wifi Range Extender

  Did Apple make a WiFi range extender to mate with the time Capsule airport?

  A perfect match would be AirPort Extreme... as a Time Capsule is actually an AirPort Extreme with a built-in hard drive.

  A much slower alternative... performance wise... would be an AirPort Express.

• Satellite C660D-178 - Linux does not recognize the Bluetooth

  Hello!

  I just bought this laptop big. I do step by step installation of my linux machine :-).
  The wifi worked well, but the system does not see the bluetooth device.

  If I understand correctly, the bluetooth device is on the same chip as the wifi and I should load the ath3k kernel module, but nothing happens.

  Help, please.
  Here is the output:

  # lspci
  00:00.0 Host bridge: Advanced Micro Devices [AMD] device 1510
  00:01.0 VGA compatible controller: ATI Technologies Inc device 9802
  00:05.0 PCI bridge: Advanced Micro Devices [AMD] device 1513
  00:06.0 PCI bridge: Advanced Micro Devices [AMD] device 1514
  SATA 00:11.0 controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] (rev 40)
  00:12.0 USB controller: ATI Technologies Inc SB700/SB800 USB OHCI0 controller
  00:12.2 USB controller: ATI Technologies Inc SB700/SB800 EHCI USB controller
  00:13.0 USB controller: ATI Technologies Inc SB700/SB800 USB OHCI0 controller
  00:13.2 USB controller: ATI Technologies Inc SB700/SB800 EHCI USB controller
  00:14.0 SMBus: ATI Technologies Inc. SBx00 SMBus Controller (rev 42)
  Audio device 00:14.2: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
  00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host (rev 40) controller
  00:14.4 PCI bridge: ATI Technologies Inc. SBx00 PCI to PCI Bridge (rev 40)
  00:18.0 Host bridge: Advanced Micro Devices [AMD] device 1700 (rev 43)
  00:18.1 Host bridge: Advanced Micro Devices [AMD] device 1701
  00:18.2 Host bridge: Advanced Micro Devices [AMD] device 1702
  00:18.3 Host bridge: Advanced Micro Devices [AMD] device 1703
  00:18.4 Host bridge: Advanced Micro Devices [AMD] device 1704
  00:18.5 Host bridge: Advanced Micro Devices [AMD] device 1718
  00:18.6 Host bridge: Advanced Micro Devices [AMD] device 1716
  00:18.7 Host bridge: Advanced Micro Devices [AMD] device 1719
  01: 00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8102E/RTL8101E PCI Express Fast Ethernet controller (rev 05)
  02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)

  lsusb
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  Bus 002 Device 002: ID 04f2:b1d6 Chicony Electronics Co., Ltd.
  Bus 002 Device 003: ID 0bda:0138 Realtek Semiconductor Corp.

  > If I understand correctly, the Bluetooth device is on the same chip as the wifi and I should load the ath3k kernel module, but nothing happens.

  You are right, that the BT is integrated with the smart WiFi ATHEROS WB195-HMC
  I have not much experience of Linux but BT and WiFi must be activated by FN + F8 (using Windows)
  Eventually, you need to enable this as well on Linux

• Re: NB100-12 - How can I activate the Bluetooth?

  I just bought a NB100-12 has.

  Installation and every few hours since it starts a process "Install Bluetooth driver" that opens a dialog box that says "Please plug in the bluetooth device and click on the OK button" if I click OK the message again in a minute. If I click Cancel, the Setup program ends abnormally and then restarts a few hours later.
  I can't tell if the NB100-12 has built-in bluetooth (although the packaging says it does) and if so how to activate it. Is it a software error, or if the bluetooth device is defective. Is it possible to test the bluetooth function?

  In the Panel the Bluetooth Local COM has no entry in there. This means - he has simply not installed?

  Hello

  Make sure the WiFi switch on the laptop is put to it.
  Make sure that it s activated with FN + F8.

  If it doesn't work try using a newer version of the Bluetooth software you can find here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Welcome them

• The Bluetooth connection is not visible on the Satellite A100

  Hey,.

  I have a Satellite A100-797.
  The laptop had Vista Home Premium pre-installed.
  But I have upgraded to Vista Business (32 bit).
  Now my problem is that in Flash cards, the Bluetooth connection is not visible.
  If I press the F8 key on my keyboard, the menu appears when I normally can I enable / disable WIFI and Bluetooth.
  But only WLAN is now visible. I installed all the packages in the driver s page. And I am sure that those who are the most recent.

  Can someone help me please?

  Thank you
  Mathijs

  Hi Mathijs

  Thanks for your second assignment and useful comments.

• How to get the bluetooth turned on the Satellite X 200 - 20 s

  Hello

  Can someone tell me how to get the bluetooth enabled on the X 200-20?

  Thank you

  Hello

  Did you try FN + F8 key combination that switches between the WiFi and BT?
  This should allow the BT on your wonderful X 200.

• How to configure applications 'Find my iPhone' on the Apple Watch of fallback to iCloud, when the bluetooth connection is interrupted?

  It would be ideal if applications of "Find my iPhone" Apple Watch can be redirected via iCloud when the watch is connected to wifi, but the bluetooth with the phone connection is lost.

  Ongoing enforcement watch OS 2.1, coupled with the iPhone 6 more (iOS 9.2). Thank you!

  Hello

  The feature you described is not currently available on Apple Watch.

  It is a community of support based on the user, but if you want to suggest that Apple considers adding that as a new feature, you can do so here:

  https://www.Apple.com/feedback/watch.html

  All submissions are read (even if you do not expect to receive a response).