IPMI message handler: BMC returned an incorrect answer

Similar Questions

• Cannot open .exe files. I get the error message by side configuration is incorrect. Event log contains contradictory elements.

  Please help me!

  I have HP Windows Vista Home Basic 32-bit. Cannot open .exe files. I get the error message by side configuration is incorrect. In the event log, it says error in manifest or policy file as a component version required by the application in conflict with one another component version already active. The two components are: c: Program Files\Viewer\Microsoft.VC80.CRT.MANIFEST.

  Problems arise when I deleted some files (don't remember which) I am now myself for kicks. Then I completely restored my system with a restore cd, upgrading to vista, downloaded all the updates and everything else works fine only problem is the opening of .exe files. Can someone please help? I'm no computer wiz only right following the indications :)

  Thank you.

  Hello

  Follow these methods and see if the problem still occurs.

  Method 1:

   

  Scan an System File Checker (SFC) on your computer and see if that fixes the problem.

  Method 2:

  Test the issue in a clean boot State.

  Note: follow step 7 to your computer as usual.

  Method 3:

  Follow the steps in this link as well.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/the-application-has-failed-to-start-because-its/c4a7c2ba-C7CD-41cb-a7ff-9fedafaf33a7?tab=MoreHelp

• Restore Microsoft Money backup files it asks for my password I entered and get a message that the password is incorrect. The password entered is correct

  Original title: restore Microsoft Money backup files

  System crashed and had to reinstall Vista. Backup my MS Money files and am now trying to restore. It asks for my password I entered and get a message that the password is incorrect. The password entered is correct. How can I work around this problem and restore my files?

  Hello

  How did you create a backup of these files Microsoft Money?

  Please see the article below which might help you.
  Errors that you receive when you try to open Money by using your Windows Live ID credentials
  http://support.Microsoft.com/kb/891338

  You can also try posting this question in the Microsoft Money forum for assistance.
  http://social.Microsoft.com/forums/en/money/threads

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• 9 - Hotspots - poor user experience have to click TWICE to clear an incorrect answer of Captivate

  9 - hot spots using Captivate

  When you select an incorrect answer (the user clicks on the wrong place of the screen) the user goes into a loop of terrible. It is a function unsuable.

  What is happening

  The bad hotspot is clicked

  Submitting hits

  Try again, a message

  You wait until they are able to do.

  If they click anywhere else now, more in addition to hot spots appear (there is no limit), one bad cannot be erased.

  If I create a new slide with a clear"" key.

  user hits bad hotspot and after presentation Gets the error message

  Clear hits

  It clears the message, the hotspot evil remains

  Surely the hotspot should also go

  To get rid of the wrong answer, they must strike clear again

  (by the way they could create hundreds of attempts if they want here)

  Terrible user experience.

  OK, I entirely agree with you on the usability of the issues of access point by default, not only for the reason that you MENTION, but for many more. It is also never possible to add a button shape on a matter of hot spot, because the whole issue can be clicked, everything can be an access point. Which means that if the user clicks the form button (I often offers to provide assistance or information on the issue as the score for this question, or the total of points already earned) which will be counted as a bad hotspot click.

• All the messages in my Inbox display a response message has been sent, even if no message has been returned. How can I fix it?

  Hello

  I had set up a POP3 to my gmail account when I was away from the office to set up an office off so when I got home, because I is more necessary than this account and it was causing some problems for me, I deleted it. I think that's when the question began that I describe in the subject line: all messages in my Inbox display a response message has been sent, even if no message has been returned.

  Is there a way to fix this?

  A side-question: I used the POP3 account to respond to some emails so I was missing and since deleting that account, I can not longer see these details... message there at - it a way to recover these?

  Thank you!

  PS - Please, if in response, use profane... as I'm not very versed in thunderbird or computer General technical mumbojumbo!

  move to the queue of the Thunderbird product

• The best way to separate the user interface in the model LV 2012 queued Message Handler?

  If you create a new "queued Message Handler" new model 2012 LV, you will see a blue box in the case of "Update view" that says the following:

  Code Recommended - If you wish to decouple the Message Handling Loop from your user interface, consider creating User Events (like the "Stop" event in this VI) to message the Event Handling Loop whenever the user interface needs updating.
  

  I would like to give a suggestion, but I am struggling to find the best way to do this and still keep code modular.  The template creates a user - Stop.lvlib "event with a create/Destroy/fire Subvi.  I would like to create a library of "User event - Update UI.lvlib" similar with similar Create/Destroy/fire Subvi keep this new modular and separate user event.  The problem, I am struck, is that there may be only two hydrants in case Structure dynamic event so, how I modularlize creating user events in separate SubVIs and always maintain this dynamic event terminals?

  As a follow-up on the issue, it would be preferable to have a library of user by indicator events that must be updated or that a single UI update of the user and then event pass a cluster as the message that contains the name of the control for the update (to use with a structure of matter), then the data to go with it?

  Thank you!

  Instead of having the events to record in the 'create' methods, you could be part outside your 'create' SubVIs and then simply bundle them. Then, you create your individual event of the user management. See excerpt where I created a vi 'Create user event - Update' in front of the stop.

  

• CVI2010-operator sizeof returns an incorrect size of a struct

  Hello

  in CVI2010 the sizeof operator returns an incorrect struct size if it contains 4 bytes and other spaces. I guess that the addresses in the struct are also not as c-programmer thinks. First a minimalist code example:

  typedef struct
  {
  oneByte tank;
  long fourByte;
  } TestStruct;

  main void)
  {
  int size;
  TestStruct tmpVar;
  size = sizeof (TestStruct);
  Here are the dimensions = 8 instead of 5

  }

  Over the past years and last cvi-versions I had never compiled with the compiler Borland, which returns the correct size. Because the Borland compiler is not included in CVI 2010, I am using the compiler to build-in the standard. In my opinion, the compiler looks to optimize the code somehow, my project cannot work with.

  Because I read the direct struct of binary files I'm looking for a to code based, solution.

  Is it possible to disable the relevant optimization?

  Thanks for your help and your response.

  Markus

  The compiler may have different alignments for the fields of the struct: a usual behavior is to them be aligned on a 4 byte boundary, that is each field starts on a multiple of 4 bytes from the beginning of the structure in memory. This seems to be the behavior of the compiler that you are using currently, who returns as the size of the structure 8 after aligning the fields.

  Alignment of the structure can be modified with a #pragma appropriate preprocessor directive: adding #pragma pack (1); in your code tells the compiler to pack the structure without filler fields; After that this statement sizeof returns the size 5-bytes are waiting for you.

• I can not connect on my user profile who is also the administrator. I get a message that the password is incorrect, however I have not changed the password. s not now what it was

  I can't connect to my user profile who is also the administrator.  I get a message that the password is incorrect, however I have not changed the password. My 11 year old niece used the pc last (play online games) and I was informed that it was a download/installation, but do not now what it was. I can't download or update any information on the pc that this requires the admin password. I am currently using the guest account, that does not give me access to all programs and the pc is running a little slower than ususal. Your help with this questions is appreciated.

  the operating system is Windows Vista Home Basic 32-bit.

  Hello

  If your niece has changed the password, or you have a corrupted system, this Information Microsoft will help you.

  Here are the different circumstances where it can help you.

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  And as you say that your niece may have downloaded something, that something could have been malicious, that can cause problems with password.

  Download, updatre and scan your system with Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• PDEElementGetBBox returns an incorrect value

  Hello

  I have developed a plugin that remove the object such as text, image, and path with respect to the coordinates of user input. In some cases, the value obtained by PDEElementGetBBox return the false value.

  Code I used

  If (PDEObjectGetType ((PDEObject) pdeElement) == kPDEPath)

  {

  PDEElementGetBBox (pdeElement, & bbox);

  float PathTop = ASFixedToFloat (bbox.top);

  float PathBottom = ASFixedToFloat (bbox.bottom);

  float PathLeft = ASFixedToFloat (bbox.left);

  float PathRight = ASFixedToFloat (bbox.right);

  If (the Condition is true)

  {

  PDEContentRemoveElem (pdeContent, j);

  }

  }

  
  

  Bbox return an incorrect value

  
  

  Is all that I'm missing
  

  Hmm. It seems that the method returns the BBox of the shape of XObject. This is the bounding box used to design the form elements, not the bounding box when she turned on the page scaling and offset. The documentation says that the BBox is returned in the 'user space '. I wonder, if you need to use PDElementGetMatrix and apply it to the BBox returned in this case - maybe anyway and you had the chance before - have you tried PDEImages?

• Return with incorrect serial number facility

  Try installing Acrobat X Pro to a new computer with window 8.1.

  With serial number of my products. Always returns with incorrect serial number.

  You probably may need to contact the Support from Adobe.  Sounds like a problem with the license, then you can try this KB: error of incorrect serial number

• Do not advance after incorrect answer quiz (quiz uses the user variables to show the wrong answers)

  Hi all

  Long time lurker, first time poster. I hope someone can help me.

  After watching this excellent video about adobe captivate blog "so what were the right answers in any case" I created a quiz with user variables and conditional early action. It displays a red x next to each question answered correctly at the end of the quiz.

  • I created the variable user for each question to a value of 0. On an incorrect answer, the variable would be set to 1.
  • At the end of the quiz is a blade that question and shows a red cross next to each question with a variable set to 1. uses conditional action that is triggered 'upon entry.

  It works, but my problem is when I saw the quiz (in the browser or SWF), on an incorrect answer, the legend of the failure appears but does not really advance the question when I click anywhere or press o. It works well on the correct answers.

  Can I sovle this by adding a next button, but I'd like to understand what I'm doing wrong.

  • Using captivate 6.0.1.240 (copy in box)
  • Windows 7
  • images on the quiz properties and conditional action below

  Any help appreciated.

  Concerning

  Jacob C

  

  

  I tested this workflow on 6.1.319 and it works fine. If a little guess in the wild... No 6.0.1.240 around at the moment. Seems strange, because a simple action like your Assign action should normally release the read head. But of course, it's a question slide and they do not always behave as expected. Could you try to replace the action of the beneficiary by a standard tip with 2 statements, like this action:

  • Assign the var_question_1 with 1
  • Continue

  And please, let me know if it works? This could be a difference between the two versions, but not sure at all.

  Lilybiri

• CAN message handling

  Hi all

  I'm new to LabView and I find it extremely difficult, mainly because of data types.

  First of all I need my project to record all of the CAN messages.

  Second, I need to inspect the ArbitationID and act accordingly on this (some with the result one CAN write)

  So I need to deposit the data accordingly and display data on the GUI

  Usign the single read I can convert CAN Inc. timestamp in a message string and save it but if I try and convert it to a cluster for manipulatuion all I get is the 8 bytes of data

  If I use the multi CAN read I can't break the 5 elements in a cluster within a Bay down to save the message

  Any thoughts?

  I saw many more code, but you make several mistakes that I think make things more difficult.

  When you playback your output is an array of frames.  Each image is a group of 5 things, timestamp, ArbID, IsRemote length data and data.  The table of the service Cluster that you are using is not one you should use.  Who's going to take a picture and turn it into clusters, but you must set the size and applies by default to 9, then what happens if you get 10 frames in a reading?  The last of them is lost forever.  All the reading that read more then 9 frames will lose one after 9.  In addition, what happens if you have no frames?  Well it converts it to 9 frames that are empty, but you go and connect those who anyway.

  What you really need to do, is to process each image one at a time, by looking at the output and then decide what to do.  This can easily be done in a loop For.  A loop For will be pull each image one at a time and let you do things with it and handle it in a way that makes sense or conditionally to save different data in different files.

  It is a modified version that will process each image and according to the ArbID wrote to one of the 3 files attached.  If the ArbID is between 0 and 0 x 12, it goes to a single file, 0 x 13 by 0x200 he goes to the other, and all other executives go drop a 3rd.  I have also updated the format in the file a bit cleaner and I think that it will contain the same information in a tab delimeted file.  Of course, this is an example, I have no idea of what you really need your program to do.

• While installation of win put updated to xp home edition, I get a message saying INF install failure. incorrect parameter

  I install win xp home edition upgrade. about 3/4 of the way through the installation, I get a message saying... Installation INF. incorrect setting failure. This computer is holding still to install xp. is anyway to solve this problem. I have to do a fresh install? Please help me. Thank you.

  Hi BigNik13,

  It seems that the installation disc has been damaged, you can replace the drive and can still use the same product key.

  Hope this information helps.

• Microsoft Home Premium product key. I bought my computer with it on my system. I had to use someone elses cause I couldn't fine mine. Now, I get a message that it is the incorrect product key. What can I do?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  In general,.
  If you are using a desktop computer, the product key is somewhere in the back.
  If you are using a portable computer, the product key is down.

  The product key is a combination of 25 alphanumeric characters divided in 5 sets. Each game has a combination of letters and 5 numbers. All 5 games are 'linked' by dashes (-).

  Here are a few links for your question:

  How to see the Vista product key:
  http://www.Vistax64.com/tutorials/85023-product-key-number.html

  How to identify, locate, and replace a product key
  http://support.Microsoft.com/kb/811224

  Everything else fails, try this: v1.03 Windows product key Viewer
  http://www.rjlsoftware.com/software/utility/winproductkey/

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Message from yahoo blackBerry Smartphones Incorrect password

  I get a message on my blackberry that my yahoo password is incorrect and I want to upgrade now. When I click on Yes and update it makes no difference. At the same time, I continue to receive e-mail messages that there was a sign in the attempt of an unknown source, which I suppose is my blackberry.

  I removed the hub app and reinstalled without success. All ideas

  Yahoo! recently admitted a data breach that occurred back in 2014. Thanks Yahoo for the notice in good time! They recently reset the passwords on multiple accounts. Have you tried to connect from an ordinary web browser and set a new password?