Similar Questions

• Computer does not recognize the monitor after update of Win7.

  Computer does not recognize the monitor after update of Win7. Have a projector connected to the computer with the monitor; from clogging the last evening updates have been installed. When the computer has been restarted this morning the monitor is entered but did not detect a signal and fell asleep: do not get an image on the monitor or projector.  Suggestions?

  It is a laptop?

  And if you start in safe mode?

  Desktop

  Haven't tried safe mode
  Disconnected the projector, and then restarted; back to work now!

• Windows 8 does not recognize Officejet 5780 after update

  I bought a new Toshiba L850 - RJ 1 computer. After installation, I was able to print a few pages. Windows 8 began its update, and then after that it does not recognize my HP Officejet 5780 printer. Any suggestions? Type of in urgent need to print my bills... Thank you.

  Hi ebrulikedi,

  a new driver of windows 8 is out for your printer on the 28th of August 14. Please order the link below link is for an officejet J5780 that I assumed, it comes to your printer, but please check your printer is the printer shown on the Web page.

  you will also find the software of hp update utility (which automatically keeps you updated printer driver software), but also a hp to address also diagnostic tools

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4131&LC=en&cc=us&DLC=en&sw_lang=&product=3301296#N897

  Please let me know if you need more information.

  Kind regards

  Na-Vi

• Satellite 4100xcdt does not recognize HARD drive after update BIOS version 8.20

  My laptop is a satellite 4100XCDT with windows xp and I want to install linux.
  Have the cd bootable linux (tested on other computers) but laptop doesn't not boot cd shape so I updated the bios with version 8.20 from the toshiba support site.
  Tried the disks formatted 1.44 and 7.20 such as recommended in the manual of the 4xxx series. BIOS has been updated successfully

  Result: after pressing the switch of the usual screen Toshiba appears, after the disc hard led flashes for a few seconds then windows except modus menu appears. After I made my choice (all tried) a few seconds later (and hard drive led light) flashes a blue screen (not enough long to read the message) and the computer is restarted. When starting from a back bootable floppy, I can't reach the (cd rom) drives (hdd) C and D
  But in my opinion that Windows Save menu modus is called from the hard drive (so I think that the hard drive still works)

  Hello

  Well, in my opinion a part on the HARD drive or bootable partition might be corrupted.
  You are right, if the windows save mode appears therefore HARD drive has been recognized by the BIOS and the HARD drive is bootable.

  I think there must be something wrong with the data on the HARD drive.
  Something similar happened on my laptop several weeks ago. After you use the chkdsk/r, I was able to run the operating system again. But then I installed everything again.

  On the Toshiba page I found the companion disc.
  The accompanying disk is capable of detecting your CD-ROM drive on the
  Toshiba during the boot process. If you need access to your CD-ROM
  Hunt, then delete "rem" Word the following lines in the Autoexec. BAT
  and CONFIG. SYS on the accompanying disk.

  REM if exist toscd001 a:\mscdex D:TOSCD001 /M:10 (AUTOEXEC. BAT)

  REM device = a:\toscdrom.sys (CONFIG. (SYS)

  It may be useful

• iTunes does not recognize my devices after the last update

  iTunes does not recognize my devices after the last update. Has crossed all suggestions from the support page (uninstalling/reinstalling driver USB, remove Lockdown folder and so on) but still no joy. iPhone continues to ask if I want to trust to the connected computer, responding 'Yes' has no effect.

  Help, please

  Thank you

  Cyana

  Found this solution here:

  Re: Does not recognize devices in iTunes on PC

  works very well

• iPod touch does not recognize my password 9.2.1 apple ios

  My Ipod Touch does not recognize my password for Apple.  IOS 9.2.1

  Password for what?

  What is the exact wording of any messages?

• I'm unable to install Adobe software licenses after the connection. It is said that it does not recognize my username after login.

  I'm unable to install Adobe software licenses after the connection. It is said that it does not recognize my username after login.

  Yes.  and?

• Checking update Java plug-in does not show latest version after update same

  Checking update Java plug-in does not show latest version after update same

  You exit and then restart your browser after Java update in order for the right version of Java to display the Plugin Check page. I felt it necessary to do so.

  See also:

  • Article on Java Mozilla - https://support.mozilla.org/en-US/kb/use-java-plugin-to-view-interactive-content
  • VΘrifier versions on site Java - http://www.java.com/en/download/installed.jsp

  Other - you should check your Plugins and update as needed.

  • Check your Plugins - https://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in, version 11.6.7.637 (aka Shockwave Player. Not the same as Flash/Shockwave Flash/Adobe Flash Player)
    • http://KB.mozillazine.org/Shockwave (mozillazine.org seems to be down at the moment (12/12/2012 11:34 am PDT), try again later)
    • Download, save, exit/close all browsers, run the installation program you just downloaded - http://get.adobe.com/shockwave/thankyou/
  • Adobe PDF plugin for Firefox and Netscape 10.1.4 (Adobe Reader 11 is the current version)
    • https://support.Mozilla.org/en-us/KB/use-Adobe-Reader-plugin-view-or-download-PDF-files

• My flash player has been updated and still does not recognize that its been updated

  My flash player has been updated and still does not recognize that its been updated on sites like facebook. I restarted my computer several times, tried to reinstall the latest version of flash player, active manage add ons and clicked active x (all windows instructions). But while that in facebook, I can't download the images as I used to on my old laptop, its me to download 1 by 1, because it says that I don't have the latest version of flash player, BUT I DON'T!

  Flash Player in Windows 8 is embedded you do not download it and all updates are are through Windows Update. Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it employees, or any other Member of this forum.

  "When you try to pick out anything by itself, we find it hitched to everything else in the universe."-John Muir

• iPod Classic does not appear in iTunes

  My macbook release 10.9.5. iTunes (version 12.1) does not recognize my iPod classic Model # MB147LL version 1.2.2PC. I tried to reboot, reset, update, but it will not recognize to sync the iPod. My computer recognizes the iPod but not iTunes.

  The latest version of iTunes (12.5.1) should work on OS X 10.9.5.  Is there a reason that you are using an older version of iTunes.  A classic iPod should work with even older versions of iTunes, but there may be a problem with the specific version you have (fixed in a later version).

  If update does not help (or if you don't want to update iTunes), given that the iPod is recognized by the system, it seems to have a data connection.  Try to put the iPod in Disk Mode.

  How to put your iPod in disc - Apple Support mode

  Before you connect iPod, stop (power off) MacBook and disconnect all the USB devices.  Plug the MacBook power adapter (so it does not work on battery).  Startup MacBook, launch iTunes and connect the iPod (in disc Mode) on a USB direct on MacBook, by himself.

  If he picks up iTunes, it should invite you to do a restore with a message on the "recovery."  This erases the iPod, so if you're OK with that (because the content of the iPod is in your iTunes library), do the restore.  If all goes well, the iPod appears in iTunes (normally) after the restoration.

• Help! Aspire 5735 laptop with broken screen does not recognize external monitor after the factory restore

  I have an ACER Aspire 5735, running horrible Vista that never worked from the beginning, always locked up, media player never worked, on, on, and after about a year my dog took in the power cord and threw out of the table and the broken screen. I used it with an external monitor for a while, but it was even worse after that and after that he take to get fixed yet has proceeded to run super slow, always locked up, refused to stop or start upward normally, and so he sat in a closet for about 3 years.

  I took it out a week ago to see if I could at least use it for my kids to friends to play on, but that she still had so many questions, I decided to do a factory restore. And of course the recovery disks that I did when I got it do not work and are not yet recognized by the computer. So I went online and has used a method that I found there by rebooting and hitting the keys ALT F10 until I was at the factory reset option. It worked GREAT! Except once the computer has restarted and opened up to windows deleted monitor and I can't do anything with the computer because apparently it does not recognize that it is hooked to an external monitor on the restore to factory settings! Help!

  She does not recognize the monitor as it has been restarted and was even the windows start the display of the icon, but as soon as it loads the screen becomes black with just the graphics "monitor is on but not connected to what either" floating around.

  Is it possible to access something in the BACK or other so he could recognize the external monitor?  What is finally toast?

  Connect the external monitor to the laptop.

  Hold down the FN key and press the F4 key. Check if you get a display on the external monitor.

• DVD does not recognize the drive after installing updates from micorsoft

  After microsoft updates have been installed on our system the DVD - RW drive does not recognize DVD or CD the drive tries to read the disc and then the door opens and DVD/CD is ejected and then it asks to insert the disc.

  Hello

  Please follow the methods.

  Method 1:

  Run the Microsoft fixit for the link.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2:

  Follow the steps in the link.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/314060

• Windows 8 Photo Gallery does not recognize images library

  Photo Gallery does not recognize my images from the library.
  They were transferred here via my old Vista computer flash drive and I can open them in the file Explorer, but Photo said that my library is empty. Any ideas?
  I can see my Facebook photos in the photo library.

   

  1. create a new folder on your C drive named Pix2

  2 copy a few files inside image

  3. Add to the library using the desktop/Explorer/library interface

  4 re - index and wait until it ended

   

   

  Barb

   

   

  Number 4) helped to me exactly the same problem:
  I just removed the folder my pictures from the picture library and put again; I'm guessing that the reindexing did the trick.

  Although a little concerned why this happens in the first place. I have absolutely nothing: he worked 2 (*) days, then no new program installed, not even new photos imported, maybe some updates for Windows and kaboom. Everything disappeared from the Photos app (everything from my computer, SkyDrive worked all the time.)

  (*) My installation of Windows 8 is now 5 days old. It took 2.5 days to find this answer. Uninstall + Reinstall and other stuff suggested did not help.

  --J

• My DVD ROM does not recognize DVD discs after upgrading Windows XP to Windows 7.

  A few days ago, I updated my laptop to Windows XP to Windows 7. Everything seemed to go well until I tried to burn a DVD disc. The program I use for this purpose is Nero 9.4.26.0. So, I've discovered I don't have problems with writing and playing the usual CD but my laptop does not recognize and does not read or write DVD. Laptop HP Compaq 6510 b and the DVD ROM is MATSHITA DVD - RAM UJ - 860H ATA DEVICE. Please share your ideas about the problem. I really enjoyed this :)

  Some CD / DVD readers may require an update to function well in Windows 7.

• Downloader does not find my camera after updating my i - Mac to El Capitan.  Help!

  Hi, I use Photoshop elements 11 and recently upgraded my Mac to El Capitan.  Elements is not now my camera in the downloader... Is there a fix for this?  Thank you.

  Hello

  Thanks for posting on the Adobe forums.

  It is a known issue and we are working with Apple to fix the problem.

  Here is the workaround you can try: organizing elements does not recognize some devices | Mac OS 10.11.x

  Kind regards

  Sandeep