Should I ISMSERV. EXE (Server 2012R2) running?

Similar Questions

• Windows media player: the server is running has no error

  When I got this error when trying to play a piece of music, I ran WMP Troubleshooter who reported

  • Corrupt recording script
  • Reset Windows Media Player
  • Windows Media Player library
  • Network Windows Media streaming settings are corrupt

  All errors have been shown to be fixed, and when I tried again to play the music, everything was fine - until I then restarted the pc when the same error "Server execution" appeared.

  I removed the WM Center and WM Player, rebooted, reinstalled WMC and WMP and restarted.  This time, when I tried to play a song that I got a very strange message that was clearly not of Microsoft origin "trial expired, buy now or enter your serial number" in a window had.

  I ran a full scan MS Essentials without result.

  I tried the suggestion in a previous post:

  Method 1

  (a) click Start and in the search bar type cmd.exe

  (b) right click on cmd.exe and click Run as administrator

  (c) in the command prompt, type the following command

  net localgroup "Administrators'"NT Authority\Local Service"/ Add

  (d) press on enter and restart the computer

  (e) check if you are able to read the files in Windows media player.

  Same result - "trial expired...". »

  I tried solving problems of parameters of Windows Media Player, which just reported 'Configuration settings could be wrong', but did not set.

  Where should I go from here?

  Hi Pavish,

  Thanks for letting us share the resolution.

  Your efforts to solve this problem is appreciated. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• IaaS distributed installation error every time that the server 2012R2

  I've tried literally all on google and even some things that not relate when you try to resolve this problem... but basically install fails to half way through and this is the part of newspaper where starts the error: someone has any ideas? There are no firewall anywhere.  The database is created on the server whenever I run the present.  Each pre - req is installed, everything appears in the auditor of pre - req.

  News: 2015-02-09 02 50 13 182 PM: "C:\Program Files (x 86) \VMware\vCAC\Server\Model" MoveRegistrationDataToDB - file name "C:\Program Files (x 86) \VMware\vCAC\Server\Model" s "dbvraiaasprd" d "vcac" - v

  News: 2015-02-09 02 50 17 385 PM: command completed successfully.

  News: 2015-02-09 02 50 17 PM 401: registration with the service catalog

  News: 2015-02-09 02 50 17 PM 401: construction project is "C:\Program Files (x 86) \VMware\vCAC\Server\Model" (InitializeRepo Target.

  News: 2015-02-09 02 50 17 PM 401: build succeeded.

  News: 2015-02-09 02 50 17 PM 401: 0 warning (s)

  News: 2015-02-09 02 50 17 PM 401: error (s) 0

  News: 2015-02-09 02 50 17 PM 401: time 00:00:27.36

  News: 2015-02-09 02 50 17 416 PM: execution of C:\Windows\Microsoft.NET\Framework\v4.0.30319\MsBuild.exe "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DeployRepository.xml" /t:InstallRepoModel /p:RepoUtilDir = "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data '; AssemblyDir = "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data" /p:DBServer = "dbvraiaasprd"; DBName = 'vcac"/p:DBConnectParam =" "/p:InstallType = 'Install'"

  News: 2015-02-09 02 50 17 432 PM: version of Microsoft (R) Build Engine 4.0.30319.34209

  News: 2015-02-09 02 50 17 432 PM: [Microsoft .NET Framework, version 4.0.30319.34209]

  News: 2015-02-09 02 50 17 432 PM: Copyright (C) Microsoft Corporation. All rights reserved.

  News: 2015-02-09 02 50 17 PM 448: Build started on 09/02/2015 14:50:17.

  News: 2015-02-09 02 50 17 463 PM: project ' C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DeployRepository.xml "on node 1 (Target InstallRepoModel.

  News: 2015-02-09 02 50 17 463 PM: InstallRepoModel:

  News: 2015-02-09 02 50 17 463 PM: #InstallRepoModel # install repository models

  News: 2015-02-09 02 50 17 PM 479: "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\RepoUtil.exe" Assembly-SqlInstall - f "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.Core.Common.dll","C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.Core.External.dll","C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.Core.Licensing.dll","C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.ManagementModel.Common.dll. , "C:\Program Files (x 86) (x 86) \VMware\vCAC\Server\Model \VMware\vCAC\Server\Model" s - dbvraiaasprd d 'vcac' - crush - v

  News: 2015-02-09 02 50 33 089 PM: command completed.

  News: 2015-02-09 02 50 34 729 PM: "C:\Program Files (x 86) \VMware\vCAC\Server\Model" model-Install - f "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.ManagementModel.dll" s "dbvraiaasprd" d "vcac" - c "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\ManagementModelSecurityConfig.xml"-v

  News: 2015-02-09 02 51 42 513 PM: System.Net.WebException: the underlying connection was closed: the connection was closed unexpectedly.

  News: 2015-02-09 02 51 42 513 PM: to System.Data.Services.Client.BatchSaveResult.BatchRequest)

  News: 2015-02-09 02 51 42 513 PM: to System.Data.Services.Client.DataServiceContext.SaveChanges (SaveChangesOptions, options)

  News: 2015-02-09 02 51 42 513 PM: to DynamicOps.Repository.RepositoryServiceContext.SaveChanges (SaveChangesOptions, options)

  News: 2015-02-09 02 51 42 513 PM: to DynamicOps.Tools.Common.SecurityHelpers.InstallSecurityConfig (config securityConfig, String httpRootRepository)

  News: 2015-02-09 02 51 42 513 PM: at DynamicOps.Tools.Common.ModelHelpers.InstallModel (String assemblyFileName, String securityFileName, String server, catalog of, string userName, String password, String httpRootRepository)

  News: 2015-02-09 02 51 42 513 PM: to DynamicOps.Tools.Repoutil.Commands.ModelInstallCommand.Execute (CommandLineParser Analyzer)

  News: 2015-02-09 02 51 42 513 PM: Warning: return nonzero code. The command failed.

  News: 2015-02-09 02 51 42 559 PM: C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DeployRepository.xml (624,5): error MSB3073: the command "" C:\Program Files (x 86) \VMware\vCAC\Server\Model "model-Install - f" C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.ManagementModel.dll "s 'dbvraiaasprd' d 'vcac' - c" C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\ManagementModelSecurityConfig.xml "-v" came out with code 1.

  News: 2015-02-09 02 51 42 559 PM: construction project is "C:\Program Files (x 86) \VMware\vCAC\Server\Model" (InstallRepoModel target - has FAILED.

  News: 2015-02-09 02 51 42 559 PM: Build FAILED.

  News: 2015-02-09 02 51 42 559 PM: "C:\Program Files (x 86) \VMware\vCAC\Server\Model" (target InstallRepoModel) (1)->

  News: 2015-02-09 02 51 42 559 PM:(InstallRepoModel target)-->

  News: 2015-02-09 02 51 42 559 PM: C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DeployRepository.xml (624,5): error MSB3073: the command "" C:\Program Files (x 86) \VMware\vCAC\Server\Model "model-Install - f" C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.ManagementModel.dll "s 'dbvraiaasprd' d 'vcac' - c" C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\ManagementModelSecurityConfig.xml "-v" came out with code 1.

  News: 2015-02-09 02 51 42 PM 591: 0 warning (s)

  News: 2015-02-09 02 51 42 PM 591: 1 error (s)

  News: 2015-02-09 02 51 42 591 PM: time 00:01:25.12

  For all of you who read this, I was able to solve the problem.

  Through all the blogs I read, I did sort of a stupid Setup 4.5.2 on server 2012R2 error.  DON'T, DON'T.

  To uninstall the 4.5.2 version of server 2012R2 if you install like I did, go to programs and features, switch view installed updates and remove the update for Windows KB2934520

  After doing this, I was able to smooth sailing through the installation.  I realized that halfway through my troubleshooting, but considering the compatibility of .net usually I don't think it would be a huge problem and I though that surely there would be a vmware KB on such a stupid mistake but apparently not.

• Windows Server 2012R2 Task Manager

  We have a question about the Task Manager in Windows Server 2012R2.

  We have a client running on a Terminal Server, they want to use the Task Manager to kill a task that is not responding.

  By default, only the user can see all taks running, also other users.

  Is there a way to partially block it? Perhaps in a GPO?

  Hello

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Please do not hesitate to contact us if you have other questions related to Windows.

• Svchost.exe is free running and leaves multiple windows open all gel. Re-loaded windows XP after a crash with original rescue records.

  Original title: Windows XP - free race - is lost.

  Just re - load windows XP after a crash with original rescue discs, svchost.exe is free running and leaves several Windows Open gel, all on and offline. Any ideas? I ran ms-fixit beta for all listed. I also disabled Norton and now use Windows Defender, still no luck.

  Hi MarkBerri,

  ·         How long have you been faced with this problem?

  ·         Did you do changes on the computer before the show?

  Svchost.exe is a process name generic host for services that run from dynamic link (dll) libraries. The Svchost.exe file is located in the folder C:\Windows\System32. At startup, Svchost.exe checks the registry services part in order to build a list of services that it needs to load. Multiple instances of Svchost.exe can run at the same time. Each Svchost.exe session can contain a grouping of services. Therefore, separate services can run, depending on how and where Svchost.exe is started. This grouping of services enabling better control and easier debugging.

  Svchost.exe groups are identified in the following registry key:

  HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsNT\CurrentVersion\Svchost

  You can run the auditor of system files on the computer.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Note: if it asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker:

  http://support.Microsoft.com/kb/900910 (valid for Service pack 3)

  Hope this information helps.

• Setup.exe has stopped running

  I try to load an update to Norton from a CD and an error response of "setup.exe has stopped running" continues to be displayed.  I checked the product and it is compatible with Vista.

  I try to load an update to Norton from a CD and an error response of "setup.exe has stopped running" continues to be displayed.  I checked the product and it is compatible with Vista.

  Hey chi_town

  You can try to do a right-click on the setup.exe from norton and then run as administrator

  problem with norton products, you should contact live norton

  http://www.Symantec.com/support/index.jsp

  Walter, the time zone traveller

• Very slow to load on a Windows Server 2012R2 PowerCLI

  Hi all

  PowerCLI 5.5 is very slow to load on my Windows 2012R2 server, I did a few tests

  Test 1 - load the snap of PS on my worstation (8.1 for Windows 64-bit - SATA hard drive)

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 1

  Milliseconds: 871

  Ticks: 18717065

  TotalDays: 2.16632696759259E - 05

  TotalHours: 0.000519918472222222

  TotalMinutes: 0.0311951083333333

  TotalSeconds: 1.8717065

  TotalMilliseconds: 1871.7065

  Test 2 - snap of PS of load on a 2012R2 Windows Server not connected to the internet, check on CRL

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 51

  Milliseconds: 603

  Ticks: 516030768

  TotalDays: 0.000597257833333333

  TotalHours: 0.014334188

  TotalMinutes: 0.86005128

  TotalSeconds: 51.6030768

  TotalMilliseconds: 51603.0768

  
  

  
  Test 3 - support software component PS plug-in on a Windows Server 2012R2 not connected to the internet, check CRL disabled

  PS C:\Windows\system32 > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 16

  Milliseconds: 323

  Ticks: 163238507

  TotalDays: 0.000188933457175926

  TotalHours: 0.00453440297222222

  TotalMinutes: 0.272064178333333

  TotalSeconds: 16.3238507

  TotalMilliseconds: 16323.8507

  As you can see there is an improvement when I disable CRL checking in accordance with this article: http://blogs.vmware.com/PowerCLI/2010/01/troubleshooting-slow-startup-with-powercli-40-u1.html

  But I still have 16 seconds to load the snap against 1 second on my workstation (which has much less computer resources!)

  Any help is appreciated.

  Hi LucD,

  I've found a workaround:

  When I run the import-PSSnapin I noticed (with wireshark) a lot of traffic failed to WAN addresses, so I set myself, in Internet Options a false proxy (127.0.0.1), excluding the proxy DNS of my domain active directory name (so I can connect to the virtual center without going through the wrong proxy)

  Now is the time of execution:

  Windows PowerShell

  Copyright (C) 2013 Microsoft Corporation. All rights reserved.

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 2

  Milliseconds: 774

  Ticks: 27745259

  TotalDays: 3.2112568287037E - 05

  TotalHours: 0.000770701638888889

  TotalMinutes: 0.0462420983333333

  TotalSeconds: 2.7745259

  TotalMilliseconds: 2774.5259

  Not bad! Execution time lowered 16 sec at 2.8 sec

• Please advise about a server to run Oralce

  Hello
  I hope this is the right forum to post my thread.
  
  What is the best server to run Oracle? It's my environment:
  
  Win 2008 Server standard.
  Oracle 11g R2 Standard.
  It will be mainly for the web application (Oracle Application Express) on server Glassfish.
  Number of users arround 100 users.
  budget $2500-3000.
  
  
  Kind regards
  Fateh

  Fateh says:

  What is the best server to run Oracle? It's my environment:

  A very subjective application - like how long is a piece of string...?

  Win 2008 Server standard.
  Oracle 11g R2 Standard.

  Why Windows? Why not Oracle Linux? It's not only cheaper, your complete stack s/w (database and operating systems) are supported by the same provider.

  It will be mainly for the web application (Oracle Application Express) on server Glassfish.
  Number of users arround 100 users.

  Number of users is less important than what treatment and the resource charges that these users place on the server.

  budget $2500-3000.

  Well, there are 3 basic choices IMO:
  -Servers Sun x 86 from Oracle Corp.
  -x 86 servers to HP
  -x 86 Dell servers

  The h/w decision should include:
  -How many processors and carrots? (cela a direct impact on Oracle RDBMS, licensing costs)
  -How much RAM?
  -how much local storage?

  I prefer not to use the local hard drives for storage - it does always scale well when your I/O calls per second and the volume increases. If you want to use local storage, you would want multiple disks local scsi of interleaving and same redundancy.

  The problem with this is that it increases the size of the server (the 1 rack unit to 4-2 rack units) - and increases the cost of the server and consumes more space in your server rack.

  There is therefore no one best answer to your question. You need to determine your needs and your constraints, shop, make a short list of models that respond to these and then select the one you think is the best.

• Server 2012R2 Lenovo ROK fails to intsaller to vmware

  I'll put up the new RD630 with 2012RD (lenovo ROK) on Vmware server

  If fails to install as recognized Lenovo hardware... support sent a link to change the data store. I'm relatively new to Vmware, does anyonehave step by step instructions to change the configuration?

  Here's what they sent:

  https://support.Lenovo.com/us/en/products/servers/ThinkServer-rack-servers/ThinkServer-RD630/solutio...

  It's getting into vmware, choose the virtual machine and change the configuration settings, add a line, and enter SMBIOS.reflecthost = "TRUE". It was my steps:

  1. Launch the hypervisor
  2. Click on Virtual Machine
  3. Click on change Virtual Machine properties
  4. Click Options, click general
  5. Click on Configuration settings
  6. Click Add a line
  7. Enter SMBIOS.reflect.host the right pane in the left pane and TRUE
  8. Click OK

  You will now be able to install the version of Lenovo ROK of the server 2012R2

• How to register ActiveX exe server for all users

  Hello

  I'm aware that with newer versions of the CVI and Windows when you generate an ActiveX exe server, it records only the server for the user profile.  I read one white papers OR who said that computer administrator may register the server for all users.  I am an administrator for the development of PC we use.  I went to the command and he ran as the administrator of the PC.  I then navigate to the path of the exe.  I published the regserver command.  Unfortunately, I am unable to distinguish if the server exe was registered for all users or if it combined again to my user profile.  Our server exe is called by another program of the CVI.  To validate if the server exe had been registered for all users, I had a user who had not built server exe on the development PC connection and try to start the server within its own CVI program exe.  When this has been attempted, the user receives an error "class not registered".  The user was not able to successfully launch the exe of the server until it has built on the PC itself.  It does not appear that the administrator regserver command worked to save the exe file of the server for all users.  Is anyone aware of any steps that I may have missed?

  I'm working on a Windows 7 with Service Pack 2 for LabWindows/CVI 2013.

  Thanks in advance.

  You will probably have to use Google.

  http://social.msdn.Microsoft.com/forums/en-us/0022ca21-CAA2-4be5-b519-757ff9daf7fb/how-to-register-3...

  or maybe http://social.msdn.microsoft.com/Forums/vstudio/en-US/4fb96971-53a1-4e25-bc75-b49cfaf4d574/problems-...

• TestStand remote EXE Server requires authorization?

  I would like to eventually integrate remote TestStand EXE Server on the operating system for our systems for purposes of remote control and testing during manufacturing and field service processes.

  Are there any requirements required for each installation of the remote server EXE TestStand?  Again, I would install this on every system we make.

  In my view, that Steven misunderstood your question, because you were making reference to the remote server EXE and not executing a sequence on the remote system.  You are free to install Remote Server EXE on any computer you want without obtaining an additional license.  Server remote EXE will allow you to call any executable (or open a file as specified by your operating system from TestStand 4.2) on this machine.  You must have a valid license on the computer that initiates the remote call and TestStand, but you are free to copy remote server EXE on remote machines as much as you want under your current license.

  P. Allen

  NEITHER

• Startup EXE does not run in the controller for cRIO-9002

  Hi all

  I have a compactRIO with controller NI 9002. The controller has the software suite.

  1 2011 Labview real-time

  2 NOR-RIO 4.0

  I made simple user LED flashing application target RT using Labview 2011 and build EXE. But EXE will not run after a successful deployment. I tried the cRIO controller using the rest of the basis of knowledge OR troubleshooting.

  http://digital.NI.com/public.nsf/allkb/52E943F7D6E7C0578625720A001DDF6E

  Kindly help me to solve this problem.

  You must disable the optimization to SSE2 option in your build properties that you run on a cRIO 9002, which is an older model that does not support this feature:

  http://zone.NI.com/reference/en-XX/help/371361H-01/lvconcepts/sse2_caution/

• Language Packs Server 2012R2

  I'm unable to install language packs on the server 2012R2, I no longer get the 775 error using dism, or no valid language pack that is found when you try to use the language pack install tool.  I downloaded the language of 2.6 GB with all languages pack.

  This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Server 2012R2 Standard Remote Desktop redirected printer stops printing 372 Win32 error 2147500037

  All of a sudden that all users RDP cannot print on any redirected printers on Windows Server 2012R2.  Printers appear on printers and devices on the server.  Print jobs appear in the queue on the server, click local device, but disappear without printing queues.  Same behavior for multiple computers, Windows 7, se8, all users, including administrators.  Easy Print installed.  Work on it for hours without success. For any help or suggestions appreciated!

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Trial of ISO Windows Server 2012R2 not start

  I downloaded Windows Server 2012R2 trial ISO file - named 9600.17050.WINBLUE_REFRESH.140317 - 1640_X64FRE_SERVER_EVAL_EN-US-IR3_SSS_X64FREE_EN-US_DV9. ISO.

  After burning by 12 Nero (and even Windows 8 image burning tool), I had only a README file. TXT file on the DVD disc,

  with the content of the text:

  This disc contains a "UDF" file system and requires an operating system
  This specification of the system supports the ISO-13346 "UDF" file.

  I tried first to boot from this drive to install Windows server 2012 R2, but I got the error message:

  Cannot find the BOOTMGR

  How can I solve this problem?

  Kind regards

  Zvi

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home