Similar Questions

• Computer does not recognize the monitor after update of Win7.

  Computer does not recognize the monitor after update of Win7. Have a projector connected to the computer with the monitor; from clogging the last evening updates have been installed. When the computer has been restarted this morning the monitor is entered but did not detect a signal and fell asleep: do not get an image on the monitor or projector.  Suggestions?

  It is a laptop?

  And if you start in safe mode?

  Desktop

  Haven't tried safe mode
  Disconnected the projector, and then restarted; back to work now!

• IPod Classic does not recognize Itunes library after updating 12.4.1.6

  After (sigh, unconsciously and unintentionally) update my Itunes 12.4.1.6 Macbook Pro, my Ipod Classic is as it does not recognize the Itunes Macbook is the parent library. I made a few additions to the Macbook Itunes playlists, but my Ipod sync... at least do not unintentionally erase all currents (gulp, 157 GB of data) and re-import the entire library again. Is there a way to get around this? I did have this problem - at least I don't remember having it-advance updates to Itunes, where the Ipod no longer recognizes the Itunes Macbook as his home library. I ran a "check disk" on the Macbook and Ipod, and they are both clean, no sign of corruption. FWIW, I use the laptop on Mavericks, OSX 10.9.5.

  Did you have to add your media to the library after the update? See the empty/corrupted after upgrade/crash iTunes library.

  TT2

• Satellite 4100xcdt does not recognize HARD drive after update BIOS version 8.20

  My laptop is a satellite 4100XCDT with windows xp and I want to install linux.
  Have the cd bootable linux (tested on other computers) but laptop doesn't not boot cd shape so I updated the bios with version 8.20 from the toshiba support site.
  Tried the disks formatted 1.44 and 7.20 such as recommended in the manual of the 4xxx series. BIOS has been updated successfully

  Result: after pressing the switch of the usual screen Toshiba appears, after the disc hard led flashes for a few seconds then windows except modus menu appears. After I made my choice (all tried) a few seconds later (and hard drive led light) flashes a blue screen (not enough long to read the message) and the computer is restarted. When starting from a back bootable floppy, I can't reach the (cd rom) drives (hdd) C and D
  But in my opinion that Windows Save menu modus is called from the hard drive (so I think that the hard drive still works)

  Hello

  Well, in my opinion a part on the HARD drive or bootable partition might be corrupted.
  You are right, if the windows save mode appears therefore HARD drive has been recognized by the BIOS and the HARD drive is bootable.

  I think there must be something wrong with the data on the HARD drive.
  Something similar happened on my laptop several weeks ago. After you use the chkdsk/r, I was able to run the operating system again. But then I installed everything again.

  On the Toshiba page I found the companion disc.
  The accompanying disk is capable of detecting your CD-ROM drive on the
  Toshiba during the boot process. If you need access to your CD-ROM
  Hunt, then delete "rem" Word the following lines in the Autoexec. BAT
  and CONFIG. SYS on the accompanying disk.

  REM if exist toscd001 a:\mscdex D:TOSCD001 /M:10 (AUTOEXEC. BAT)

  REM device = a:\toscdrom.sys (CONFIG. (SYS)

  It may be useful

• WINDOWS 8 DOES NOT RECOGNIZE THE SCANNER OFFICE HP OFFICEJET 4500

  MY WINDOWS 8 DOES NOT RECOGNIZE SCANNER OFFICE OF HP OFFICEJET 4500

  Hello

  1. don't you get any error message when the scanner not detected?

  2. do you insert scanner in another port of the computer or to another computer?

  3. were there any changes (hardware or software) to the computer before the show?

  4. other recognized devices?

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Run the hardware and devices Troubleshooter and see if it helps.

  a: press the logo Windows + O to open the search box.
  b: Type Troubleshooting, press on enter.
  c: now click material and its.
  d: now click hardware and devices , and then click Next 

  Answer please if you have any questions.

• Windows 7 does not recognize external hard drive after the reboot

  I just bought a WD external hard drive.  I plugged in the USB port and automatically loaded everthing.  I even registered the product.  Then I was told that there was an update to the external hard drive.  I went ahead and put to day and when my computer restarted to him alone is no longer recognizes WD external hard drive.  I had another hard drive that I used where Windows 7 does not recognize it either?  Is it some sort of security setting, I need to adjust on Windows 7 64 bit?  Please notify.

  Check if the hard drive is assigned to a drive letter in disk management.

  Click Start, right click on computer

  Click on management of

  Expand disk management

  Select your external hard drive if its posted here

  Make a right click paths and change drive letter

  Restart your computer, open the computer in the start menu and see if it shows then.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Windows 7 does not recognize my iphone

  After you download the photos on my iphone, windows 7 does not recognize my iphone. in other words when I open my computer the iphnoe isn't here; but in Panel, in devices and printers, it appears with unspecified Apple Mobile Device USB driver, in the form of a generic icon.

  When I run Auto Play in the search box; the iphone is there with the icon to the right, but there is no screen options menu. It behaves as if it were invisible.

  It is important to note that this started AFTER downloading the pictures for the first time. Until windows has always recognized my camera properly.

  Thanks in advance for any help.

  Here's your solution:

  iPhone or iPod is not correctly recognized by computer when USB drivers are not installed properly or are out of date
  http://support.Apple.com/kb/TS1538

  Follow all the methods in the order that they are listed. The above article helped a lot of people the question of fixing with iPod/iPhone not getting detected do not.

  See you soon! "That's all a pension chequer nights and days,"
  Where destiny with men for pieces plays;
  Here and there, mates and kills.

  In a world without walls and fences, who needs windows and doors? Life sucks! Getting used to!

• Windows 7 does not recognize the graphics cards

  I have been using the same PC for the last six years of the game without any problem, I upgraded to Windows 10 and things went to * a few days after talking to Microsoft Care I was told that with the latest version of Windows 10 updates and other updates my system is no longer compatible with Windows 10 and I did a clean install to Windows 7. now, Windows 7 does not recognize my graphics cards 2 x 'GeForce GTX 480"with SLI configuration.

  In "Device Manager", it shows two units operating as VGA standard with no details etc.

  It install drivers for the 'GeForce GTX 480"because it does not recognize their being there.

  Any ideas or help... Please also stay simple for a non PC Geek

  No problem if nothing else, you've found the system images is now with win-10 days worth being pushed m main $ :)

  It of free and worth to be using,

  http://www.Macrium.com/reflectfree.aspx

• iTunes does not recognize my devices after the last update

  iTunes does not recognize my devices after the last update. Has crossed all suggestions from the support page (uninstalling/reinstalling driver USB, remove Lockdown folder and so on) but still no joy. iPhone continues to ask if I want to trust to the connected computer, responding 'Yes' has no effect.

  Help, please

  Thank you

  Cyana

  Found this solution here:

  Re: Does not recognize devices in iTunes on PC

  works very well

• Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Disconnect all USB storage.

  Run this tool by do right click and choose 'run as administrator '.

  Of course, all first extract it:

  http://www.Uwe-Sieber.de/files/drivecleanup.zip

  If your XP is 32 bits, use the Win32 folder.

  Reset.

  If you still can't find the drive, assign it a drive letter in disk management.

• Windows xp does not recognize the hp c6180 photosmart printer

  My windows xp does not recognize my hp c6180 photosmart printer

  Hello

  1. were you able to use the same printer without any problems before?
  2. don't you make changes on the computer before this problem?
  3. you receive an error message?

  See the following articles that may help you resolve this problem.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Resources for the resolution of the printer in Windows XP problems
  http://support.Microsoft.com/kb/308028

• Windows XP does not recognize the Sony Walkman NWZ-E344 media player Red

  original title: Sony Walkman NWZ-E344 Media Player Red

  My Windows XP does not recognize my Walkman when installed in USB. All other computers do, then only, assumes that I do not have good pilot.

  Hi brumbybrat,

   

  You must install the drivers for the walkman to recognize.

   

  More information is available in the following links:

   

  Is there a CD of installation for the Walkman® player?

   

  How to install manual and the Content Transfer software for the Walkman® player

• Windows 7 does not recognize my external screen.

  Windows 7 does not recognize my external screen.  I checked the driver and even of the went to the NVIDIA site and plugged my material for my graphics card ID to get the correct driver and yet, it does not recognize it!  So here's what I have right now since I've upgraded to Windows 7 Ultimate edition = Standard VGA graphics card.  If someone has a legitimate solution to this problem, feel free to comment! Thank you

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista does not recognize my Ipod Touch

  Windows Vista does not recognize my Ipod at all. He even appears in Device Manager. I know that is not my USB cable because it is new, and it isn't my Ipod because it works on Mac computers. I just need someone with expertise to help me get my computer to recognize my Ipod so I can go back to enjoy my music.

  Hello

  MTP mode for WMP11 sync - mode MSC to treat the MP3 as a reader. So you have set up in the MTP.

  -----------------------------------------
  If necessary:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Make sure that Windows is updated appropriately that there have been several USB updates.

  1 check that the driver letters for them, for a player, if the drive of the default drive letter is changed, what is happening.
  Mine was h: I added a device that took H: and the player stopped. So I put it back to H: and the other
  device to J: and everything worked again. If necessary start - type in the area of research-> disk management find top
  -Right-click on it - RUN AS ADMIN

  Don't forget to remember the MP3 must be set to the PSG to sync with WMP, and meteorological service of Canada to copy and delete files
  and update the firmware.

  If no joy follow these steps:

  You may need a powered hub. (all the USB ports on your computer are not powered, often only 2)

  Try these:

  Make a Restore Point

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Here, your devices are the MP3 player.

  Now look everywhere EXCEPT the USB controllers for your devices (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

  Here is the similar procedure under XP, Vista is the same, except that we need clear specific devices, as appropriate.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows 7 does not recognize my color and barnes noble nook

  Windows 7 does not recognize my color and barnes noble nook.  It recognizes my external WD hard drive, but when I plug my nook, plug-and-play do not come and tell me that he has found a new device.

  How can I solve this problem?

  Angi

  ______________________

  My personal website:
  Absolutely of Angi
  http://absolutelyangi.com
  _________________________

  Dell Inspiron 530
  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 32-bit
  Processor: Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz, x 64 family 6
  Model 15 Stepping 11 processor Count: 4
  RAM: Mb 3061
  Graphics card: Intel (r) G33/G31 Express Chipset Family, 256 MB
  Hard disks: C: Total - Mo 476929, Free - Mo 349361;
  Total I: - Mo 476937, Free - Mo 363385;
  Motherboard: Dell Inc., 0FM586, CN736048B800IW.
  Antivirus: Kaspersky Internet Security 2011 - 11.0.2.556

  Look at this thread, third substantive post.

  http://bookclubs.barnesandnoble.com/T5/nook-technical-support/win-7-won-t-recognize-nook/m-p/694110/message-UID/694110#U694110