IPs much-needed to the SCANNING resolution using the file hosts in Oracle11g CARS

Similar Questions

• DVD how much we need for the files backup with backup and restore program?

  Hello how are you?
  DVD how much we need for the files backup with backup and restore program? Y at - it large differences in the time and space between write backups on DVD and external hard drive?

  I do not understand your question.  Asked how the space has been used on your C: drive and you answered 60 GB.  Now you say your PARTITION C: is 60 GB with only 20 GB used?  I really don't understand what you're so confused.  It's simple arithmetic grade 3rd.  What is space you USED on the C: drive, that multiply by 0.7 to obtain the amount of space will be used on your backup disk after compression.  Divide this number by 4.7 and round.  That's how many DVDs you'll need if you insist on the use of DVDs for backup.  Then

  (1) If you are using 60 GB, the answer is (60 x.7) / 4.7 = 8.936.  I rounded up to 9 and added 1 just to be sure.

  (2) If you use only 20 GB, the answer is (20 x.7) / 4.7 = 2.97 rounded up to 3.  Add 1 and get 4.

  If you use only 20 GB, I am very surprised, because almost any important installation of Windows 7 is going to take more than 20 GB.

  All of this assumes that you do NOT use the Windows backup and restore program, but one that I recommended.  When I used the windows one, the results were several times the space that I used on my C: partition.

  Good luck.

• I'm trying to reduce the file size of a jpeg file, but the dialog box under image > image size reflects a much smaller that the file is. I saved the image after resampling and by reducing the size of the image, reduced the pip to 72 and lowered the qua

  I'm trying to reduce the file size of a jpeg file, but the dialog box under image > image size reflects a much smaller that the file is. I saved the image after resampling and simplistic image, the pip size reduced to 72 and lowered the low quality only to see the minimum file size reduction. Why the dialog box in photoshop gives me a different file size than my computer and how do I solve this problem? Thank you!

  The Image Size dialog box dialog box shows the uncompressed size.

  Your operating system (Explorer/Finder) shows the size compressed. (size on the disk)

  If you use save for Web, you can see the compressed size, but also an overview.

• AnyConnect triggers warning to the file Hosts on Avira

  The company that I work uses Anyconnect to provide VPN services.

  I wonder why Anyconnect 3.0.10055 triggers a warning from access to the Hosts file on Avira antivirus on my Windows 7 64 Bit PC?  I tried to disable the protection of Avira and then connection and not detected any changes made to the file.  AnyConnect connects very well even when Avira blocks access.  Anyconnect opens it for writing, but do not write?

  On a separate note, why Anyconnect use 6 ip addresses?  Should what document I read?

  Thank you

  Bruce

  Hi Bruce

  as far as I understand, AC has indeed changed the hosts file, but only for a very short time when establishing the connection.

  To be more precise, after doing a DNS lookup of the head (AAS or router) it will rename the hosts file and create a new one that contains the result of the DNS lookup. This is to ensure that the following names searches return the same ip address. When the connection is established, the original hosts file is restored.

  Now, it's only important in scenarios where the DNS load balancing is used, then, where the DNS name, you connect to potentially resolves in 2 or more different ip addresses. This could cause a problem if at different stages of the procedure of connection, we use different ip addresses, that's why we store the first ip address in the hosts file.

  So if you do not use the VPN load balancing then you should not see any problem if the hosts file is not editable.

  Are what 6 addresses you referring?

  HTH

  Herbert

• I can't download security internet mcafee: mcafee support says to contact microsoft to replace the file "hosts". How can I do this?

  I'm unable to download mcafee security, mcafee support said I had to contact microsoft to replace the "hosts" file how can I do this?

  This sets the default Hosts file. http://support.Microsoft.com/kb/972034

• need details the cluster host wwn

  
  Hi guys

  I need details such as

  Name of data center

  name of the cluster

  host name

  HostIP

  as hba device name 1 and hba2

  and details of wwn

  I use following script, but here I'm missing datacenter, cluster name, host name. Please help me...

  Get-data center 'testing ' | Get-Cluster 'test ' | Get-VMhost | Get-VMHostHBA-type FibreChannel | Select VMHost,Device,@{N="WWN; E = {« {0} » : x-f$ _. PortWorldWideName}} | Sorting VMhost, device

  Have you tried something like the following:

  $datacenter = "test"; $cluster = "test"; Get-data center-name $datacenter | Get-Cluster-name $cluster | Get-VMhost | Get-VMHostHBA-type FibreChannel | Select @{N = 'Center'; E={$Datacenter}},@{N="cluster '; E={$cluster}},VMHost,device,@{N="WWN '; E = {« {0} » : x-f$ _. PortWorldWideName}} | Sort VMhost, device | Export-Csv C:\output.csv

  
  

  It generates a file named output.csv to C:\

• How to disable the file host Guest service (hgfs.sys) system?

  to disable hgfs, depending on error failure CPP while creating trust relationships between Windows 2003/2008 servers or domain controllers on the Web Vmware site, to change the registry, but could not find hgfs on regietry as it intrudued on my Win 2003 SP2.

  So, how can do?

  Thank you.

  http://communities.VMware.com/message/519830

• Cannot right click Windows 7 Explorer of files to generate the copy of the file names in a Notepad or Excel-compatible file. HELP REQUESTED!

  I struggled for several hours to restore the service right click that I used to have XP to Windows 7.  I need to save lists of file names such as displayed in the file Explorer. Allowing you to right-click and save files in Notepad. This option has been removed in Windows 7 and anything put in place to restore it.

  I have lists of items in the inventory and need to copy and paste the image corresponding to a transfer sheet to allow the server names to match images in article SKU.  The file names are long and typing is a complete waste of time.

  I used to be able to find them in the Windows Explorer, right-click on the directory and generate a txt file that I could open in Notepad or Excel.  -Easy.  Now right-click only allows an export in an uneditable image in ONE NOTE. This is useless for me. I can't do anything with an image file - I need the editable data.

  Is there a solution?  I need only the file name and extension, not the full path, in a text or spreadsheet document propagation.

  I had used the Microsoft solution to install their dose without knowing the final format was a NOTE image file format and not a simple txt file. I try now too write the batch file:

  %windir%\Printdir.bat

  or edit it in order to keep the file in Notepad and do not make the final conversion into a single Note.

  The problem is that the fix from Microsoft, designed to fix this problem, has placed the conversion file in the root directory and it cannot be overwritten.  I refused the possibility to delete, edit or write the file due to the requirements of administrative privilege mandated by the security of Windows 7 too much.

  So if anyone has a solution to every problem - that would help - I am very tired and frustrated and not happy with Microsoft.  Their zealous concern with security made their unnecessary programs for me and have further discouraged me to convert to the windows 10. frustrations and nightmares are waiting for me there I can't imagine.  What I really want to do at this point is to go back to XP.

  He ate five hours of my day. I don't have the time to fight like that. I am trying to be productive, but all I got are monumental technical walls and roadblocks - often designed into the system. Frustrating doesn't begin to describe it.

  Found a solution on a Web site:

  http://www.watchingthenet.com/how-to-print-a-directory-tree-from-Windows-Explorer.html

  They said it was for VISTA, but worked for me under Windows 7. You will need to use Notepad to the command prompt and select run as administrator to save the file in the root directory.

  Thanks for the help.

  Cheers.

• 7 re: what is the location of the file of nuances in the part of illustrator to Adobe Creative Suite 3 Design Premium for windows product (date and time)? Drop it eat its funcionallity.  Thank you

  First posting: https://forums.adobe.com/message/6529108#6529108

  Support suggestion: the discussion is posting again to get the response from adobe staff

  ===

  Illustrator does not work as it should...

  I want them to compare the size and date of creation with what I installed on my original computer... I installed several times with my original CD and I tried once downloading the files from the adobe site (using my own license). I suspect that the files have been changed or renamed on my laptop by an unauthorized user external causing dysfunction of the application.

  Customer service does not support CS3 more and the updates / fixes in the adobe site does not solve the problem... They redirect me to the support forums...

  Currently, my problem is that after creating a swatch and drag it to the Group swatch, he does not like it needs a new form... Now, after deactivating and activating my license nuance seems to fill the new form, but when the filter sample's persistence in being created next fill even if a different color is used as a fill (X)... Aid for the creation of a shade over the internet just complicates the matter.

  This is why I would like to know if the updates on my product are received or files are overwritten without my knowledge...

  Thank you...

  PS Do you know how to contact an employer of personal adobe on the forums?

  I saw your post today.

  Move the file hosts on the desktop it will be part of a roaming profile?  It's means that activation will take place from any computer that are a part of my local network of microsoft.  How can I make sure that the program I have access is the one located on my local C drive and not in a roaming profile in may be an environment of Cloud Computing or unknown equipment with access to my network without authorization. I have only 1 laptop where locally install the suite CS3

  My host file has no entries on it and even when trying to copy the desktop, activation can be performed no, same problem.  There are days, I used the trial rather than the activation option, after trying to activate all of the product you mentioned in your response, other period to return to the original 30-day trial.

  Recently, I noticed that I have a roaming profile with a file of different workspace than I have on my local drive (3 files, Control Panel, and type base).  On the roaming profile, I see a directory for adobe illustrator CS3 settings------workspaces-file AIWSPrefs which has different entries that I have on the local drive.  Normally I don't customize much the workspace or safe the setting used, I load the brushes, shades, etc manually from the location, they are on my local drive if directories swatches and brushes on the roaming profile are empty instead. Adobe Kuler pallet and Eureka are on the local base folder not in roaming.

  The directories on my roaming profile are:

  Acrobat

  Adobe Illustrator CS3 settings

  Adobe PDF

  Adobe Photoshop CS3

  Color

  9 Dreamweaver

  Flash Player

  Fonts

  Headlights

  Linguistics

  Newspapers

  LogTransport2

  Save for the Web HAVE

  Updater5

  Workflow

  XMP

  Inside directory itinerant illustrator, the following files:

  Color settings to HAVE it

  AIAppResources

  AIMenuFaceCache

  AIPrefs

  Brushes

  Composite fonts

  Graphic styles

  IllustratorFnt.lst

  Kinsoku

  MojiKumi

  New Document profiles

  Cache.ARTX plug-in

  Plug-ins

  Print presets

  Save Web settings

  Color chart

  Symbols

  Aplatissements predefined transparencies

  Workspaces

  In the above scenario, what workspace and other files of functions will take precedence?  How can I avoid the roaming profile?

  Not being not able to copy the roaming profile on my local disk files, I was wondering how this roaming profile was created and why the files are there.   These files have a date of last month, local files have been installed most recently.

  Your comments will be appreciated at your earliest.

  Thanks in advance

• Impossible to uninstall the applications Manager - fix file host

  Try to uninstall all my adobe products (if I can do a clean reinstall). I ran all uninstall them with the creative cloud cleaning tool, but I can't seem to get rid of the Manager application files. The tool clean: "difficulty Host File.

  Hello

  If you are unable to uninstall the application using the cleaning tool, please try steps mentioned below-

  Reset the file hosts:

  Note: You may need disable you the security software to change your hosts file.

  Windows

  1. Click Start > run, type % systemroot % \system32\drivers\etcand press enter.
  2. Right-click on the hosts file, and then select Open. Select the application Notepad open the hosts file.
  3. Save the hosts file: choose file > save under, save the file as hosts.backup, and then click OK.
  4. Look for the hosts file for entries referencing activate.adobe.com (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
  5. Save and close the file.

  Mac OS Log in as an administrator to change the hosts file in Mac OS.

  1. In a Finder window, choose go > go to folder.
  2. Type / etc.
  3. Select the hosts file and open it.
  4. Save the hosts file: choose file > save under, save the file as hosts.backup, and then click OK.
  5. Look for the hosts file for entries referencing activate.adobe.com (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
  6. Save and close the file.

  After trying this rerun cleaning tool.

  Let us know if this will help!

  Kind regards

  Sandrine

• Where are the files published in the recent tab recorded exactly?

  So, here is the situation I faced, if I open an eBook (let's call it E_Original), highlight the text and add some notes, these changes are not saved in the original pdf file. Edited pdf file appears in the recent tab with the small icon of cloud under the name of file (this file has the name E_Original but seems it is not the original file, but some temporary files located elsewhere).

  So my file is secure on cloud to adobe but again I want to access locally so that I can record on dropbox on my tablet, possible etc on my computer. So, where exactly published in MRU files are found in android?

  My OS: Android 5.1

  Thank you

  Hello

  If you want to save the file on dropbox or car, you can do so using this option (on the lower bar) to share. If you want these clouds files locally, you can generate a public link using the "share the public link" option in the dialog share. After you build the link, you can download this file and you can save it locally.

  Thank you

  Adobe Acrobat team

• Rename the file in Oracle Forms before copy on another drive

  Dear all seniors
  I want to ask how to rename file before copying it to another drive.
  In fact when we get the drive to open file then it this time before copy I want to rename it.
  -This code that I use for the copy of the first path to the other file.
  DECLARE
  filename VARCHAR2 (500);
  BEGIN
  filename: = GET_FILE_NAME (File_Filter = > ' files (*. *) | *. * |');
  READ_IMAGE_FILE (filename, 'None', 'IMAGE6');
  HOST ("xcopy" ' | "") name of file: ' (' \\172.172.0.4\Combo_pic\',no_screen);
  END;
  I use this code it works fine, but I did ' t know how to use before you copy the file.
  host (' Rename cmd /c "" "|: block3.file_name |'") «' |: block3.file_name_n |'» " '); -file rename
  
  Thank you.

  Ghulam Yassen wrote:
  Dear all seniors
  I want to ask how to rename file before copying it to another drive.
  In fact when we get the drive to open file then it this time before copy I want to rename it.
  -This code that I use for the copy of the first path to the other file.
  DECLARE
  filename VARCHAR2 (500);
  BEGIN
  filename: = GET_FILE_NAME (File_Filter => ' files (*. *) | *. * |');
  READ_IMAGE_FILE (filename, 'None', 'IMAGE6');
  HOST ("xcopy" ' | "") name of file: ' (' \\172.172.0.4\Combo_pic\',no_screen);
  END;
  I use this code it works fine, but I did ' t know how to use before you copy the file.
  host (' Rename cmd /c "" "|: block3.file_name |'") «' |: block3.file_name_n |'» " '); -file rename

  Dear Ghulam Yassen,
  As salamualikum
  > HOST ("xcopy" ' | "") name of file: ' (' \\172.172.0.4\Combo_pic\',no_screen);
  Change the line above with the following line. He renames as copy.

  HOST ('xcopy "'|| filename ||'" \\172.172.0.4\Combo_pic\'||:EMP_CODE||'.jpg',no_screen); ---here EMP_CODE is a column value.
  

  Above code renames in emp_code value.

  I hope this works...

  Hamid

• How to save downloaded and open the PDF directly into my laptop, compared to saving the file in the cloud? Can I remove DC and install Acrobat Reader, which is thin and easier to use for my needs and much, much more secure?

  Somehow, I downloaded and installed Adobe alleged DC update for the existing acrobat Reader installed on my laptop.

  DC app has been a disaster for me in terms of generation of convoluted navigation and extra work.

  In addition, I do NOT trust or want an application based on a cloud because of the deep and hard-learned risk, privacy and security, as well as the occasional loss of connectivity online and access, what urgent needs can get GROUND in terms of use of such an external cloud-based application.

  Issues related to the:

  [1] how to save a PDF downloaded and open directly on my laptop, a report file to save the file in the cloud and then copying it in the folder of the laptop? This process in several steps inside the DC is a frustrating PITA, as Adobe Acrobat Reader has been sufficient for my needs.

  can [2] Alternatively, I remove CD and install the latest version of Adobe Acrobat Reader, which is thin and easier to use for my needs and much, much more secure?

  Thank you very much in advance for the help and deliberate in a timely & the readers attention. Today is Tuesday, November 3, 2015.

  Kind regards

  Stephen H. Franke

  E-mail: shfranke@hotmail... com

  Hi stephenf95557665,

  (1) you can simply save the file on your computer as allows you to save in the older version of the player, it is not necessary to register I your cloud of document.

  If you save the file to the document cloud, you will be able to access any system from anywhere.

  (2) If you still think earlier version users need, then they can probably uninstall the last being & reinstall the old version using this link http://get.adobe.com/reader/enterprise/

  Kind regards
  Nicos

• How to save a scanned document using the e Hp printing app

  I'm going crazy
  I scanned a document that I need e-mail and I can record it, nor any where-cloud or elsewhere-, neither can I e mail
  I use my HP e print application and I scanned the document
  My only options are to preview or change settings
  There is NO menu or icons to make e-mail, forward, etc.
  Please please help

  Hi Kathyagillespie,

  Thanks for the information and shout it out.  It's always nice to be complimented.

  I checked this morning, and if you choose preview instead of scan, once the application has completed the analysis for the preview, it will return the same screen as on the #2 of screenshot.  So this isn't the question and I am not able to recreate the problem you have, no option to save after scanning.

  We will try to uninstall and reinstall the application.  You need activate the application again.

• OfficeJet Pro 8610: Helps the scanning resolution and economy. BMP

  When scanning resolution is poor, how can I increase it to 300 DPI max... How to save picture under. BMP it currently only gives three options, PDF, OCR, or JPEG

  Well well after literally hours of Googling being impossible to find anything at all on this unit or any other site, a friend suggested that I open the area to set up scanner on Mac itself... and to my amazement after a little digging here, I was able to find the settings for the CIO and the file type save high-resolution BMP images.
  Why hell HP do not display anything in their pages help or on the LCD of the printer to indicate how do, I'm not sure. I'll be happy to send a screenshot to anyone who needs this info.