IPv6 can not ping 2nd service console

Similar Questions

• can not enable web services. printer on the network. ip address by default do not connect using auto ip

  B210 - tried to reset the default values. default IP address does not connect to the network with auto that IP had to manually set IP addrtess something similar to the properties on the zone reactive verzion. can not disable web services - never activated.

  no primary or secondary DNS server. not sure if this is problem. can print ok via network.

  I used the manners of address google DNS gave you me and it connected to the web and downloaded the updates and gave the address of e-mail. I t may have had difficulties as the gaveme just of the printer a message that he could not reconnect. not sure about that. Another question please. Do I need a setting WINS? I'll try an email print from a different network. Thank you

• HA and 2nd service console

  I had just a console single service in each of my clusters for too long.  I want to install a 2nd / backup service console, only to improve resilience/accuracy of HA.  HA is configured on my cluster right now, with 'VM leave it on"since I'm paranoid about false positives. It happened twice in as many years.

  Service primary or existing console is on vSwitch0 (typical of course) which NIC access network 10.25.13.0.

  Is it not better to add a console/service gateway secondary on a network other than the primary?  If so, vSwitch1 (in use by my VMs) access network 10.25.20.0 so can't I just 'Add Networking' / Service Console / use vSwitch1 and add IP/gateway, etc and do with it?  Again, I have only this want to another path for HA heartbeat and don't have (or really even need) a NETWORK card dedicated for this purpose.

  Sound good?  The warnings I share with this approach?

  Then I can set the HA to do that HA is REALLY supposed to - detect what is almost certainly a host FAILURE and restart the virtual machines on other host in the cluster.  I find this 'interesting' VMware added option 'VMs letting' turned on only for the host isolation response, because it is not more or less defeat the purpose and/or is not an admission that HA is prone to false positives that get undesirable results?  Secondary service consoles, taking other paths (physically, nic to pass) AND to other subnets would seem to be an absolute requirement for the ideal/real 'stop VM' (and restart on hosts alt) implementation of the AH.

  I think that what is meant by the tip to maintain the network label, it is similarly to name the second service even console on each host in the cluster, not name - it the same as the first service console.

  Think of the second service console to provide connectivity redundant heatbeat mainly between the hosts, not really of another interface to check the addresses of isolation after the heartbeats are lost.  Use of the second service console if it is placed on the redundant network links well & switches must ensure that when a problem is detected, it is a failure of another host and the additional verification of isolation on a single interface would be enough to determine that the local host is not the issue.

• Virtual machines communicate don't not via cisco 4001i module, can not ping gateway

  We have just buit IBM blade with a switch cisco nexus 4001i 10gE module.  The service console communicates via a different network module, but VM networks are mapped to network adapters that use the cisco nexus 4001i circulating on 10gE... Unfortunately, the service console connections are working properly, but virtual machines cannot ping the gateway.  We move the virtual machines on the service console network and they work.  The NIC adapaptors are configured to 10, 000mbps but are appearing at only 1, 000mbps.  Currently, we don't have all the switches-dv put in place and run on standard v-switches within ESX, which brings me to this question: VMware does require the nexus 1000v to work with cisco 4001i?  Also, another symptom, the cisco discovery Protocol is not collecting the information since the passage of these adapters that are connected to the 4001i but take the switch info at the other network management modules.

  Anyone have any ideas what we do wrong?

  Had a very similar problem with a very similar hardware.  Turned out to be a problem with a configuration between the Nexus 4000 and Catalyst switches they're connected too.

• Sony 55w790b tv with connected Wifi can not access internet services.

  I can use the Internet browser on this TV app, but discover the button on the remote control, which brings me to an Error Message that says services can not be access at this time. try again or cancel. When I click on a movie title.

  Everywhere I turn, I get this message.

  Except the Apps that do not work.

  I can't do a factory reset, many settings of the image to restore.

  What is the Solution, I hear a lot of people online complaining of the same problem and they say if you can access the Internet browser, then the problem is with Sony. And nothing should be done on my end.

  I noticed that the internet is slow over wifi and wonder if a network cable speed internet tv to the top. I have internet fibreop of the signal, it should be fast.

  The Tv need a software update. It works now. But wow Sony Community Customer Support is really bad. I still haven't answered my other questions. and I had to solve my problem in this post.

• Service Pack 2 could not install, windows can not access the service install and slow computer

  Please help, I'm using Vista Home Premium 32-bit. I'm not very technical, and I think that my problems began some time ago when Vista Service Pack 2 Installation causing boot failure has failed and that I could not connect. I tried a fix by using the Startup Repair and was able to connect again, but now all my Vista updates since then do not install and now my computer is running extremely slow, constantly trolling.  I also have problems "windows service install could not have access. I have tried to reinstall Windows Installer 4.5 but says "update does not apply to my system. I also tried to unregister and re-register Windows install that does not work. When I try to 'upgrade' my installation disc vista, the option is not available. I think my computer is confused if it running SP1 or SP2. Also I can not install programs because of the installer, the service to publish a work around if needed. Thank you

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install SP2?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Safe mode, so I can not access the Services via a Normal startup.

  Services, including Security Center, Windows Update, SuperFetch needs to be restarted but Vista freezes outside Mode safe, so I can't access the Services via a Normal startup.
  CHKDSK shows the hard drive has no bad points and the system works fine in Safe Mode.
  No idea how to deal to freeze shortly after startup? Even McAfee should be started. No idea what order to these programs.
  I've already eliminated at least 10 programs that were part of the start-up, after executing six miracle of Microsoft Diagnostics.

  * original title - problem of catch-22 with Vista freezes *.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Try to put your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows XP:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• 6.0.1: play store blocks - can not update Google Services to play and other applications (and phone is hot!)

  Hello

  I've updated to Android 6.0.1 (23.5.A.0.575) on my Z3 Compact (D5803) and I have a problem: I can't update the services Google Play or any application.

  What took place and what I've done:

  Step 1: Just after the update: random crashes

  Just after the update, notification Services play Google occurs as it is necessary to update. But when you tapoterez on it it opens stores Play, which closes immediately... If I open the game manually store, I have the same behavior (between 2 and 10 seconds before the accident). The accident leaves no message, it goes back only to "desktop".

  Step 2: Remove the cache, data, and updates

  I tried to delete the cache (step 1), data (step 2) and updates (3rd step) on Google Store with reboot, and each time had no effect on my problem: I have always had the same behavior.

  Step 3: Uninstall of updates of Google play Services

  I removed the updates of Google Services to play. Now, play store not crushed, but I can't update any app, I get the error "* App name * cannot be downloaded." Try again and if the problem persists, download help troubleshooting. (Error during extraction of the information from the server. ([DF-DLA-15]) »

  (or, in french: "Can't download the update of xxx, because an error has occurred (error when retrieving information from the server ([DF-DLA-15]).).")

  Could you help me please? How can I reinstall the Store and Services play?

  And another question: my phone is very hot! Is this normal with this update?

  Thank you.

  Hi Ze_Bast,

  You can try the following.

  1 uninstall the updates of Google Play Store

  2 clear data Google play Services

  3. clear the data from Google Services Framework

  4 restart handset

  5. try to access the Play store.

• Linksys SRW2024 - I can not connect to the console

  Hello

  During the download of the firmware I had a crash (unfortunately!). I did it by webview.

  Now, I'm not able to access the switch over. The entire feature disappeared.

  I try to connect to the switch using the serial interface, but this most recent worked on my switch. (-> That of why I decided to install the new firmware)

  -I know that HyperTerminal configuration and I used 2 different series cables (an anonymous and the console blue cisco cable (Rollover cable)).

  With the cables, I can connect without any problems for cisco Pix, cisco ASA5505, various cisco routers and also for the new dell switches.

  But I can not access the Linksys switch!

  In the Linksys forum, I got the answer: "you must use the cable supplied with the switch. Unfortunately I can not find this cable in my range.

  Please, could you tell me if the SRW2024 differs from the blue cisco console cable? If Yes, where can I organize such a cable? Or can you tell me the pinouts of the DB9 pins. Thank you very much.

  Kind regards

  Hi Angelo,.

  OK, I took out my multimeter and checked the list of pins on my cable from the console that I use to connect to my SRW2008P.

  My SRW2008P, which should be the same cable as the pinout on the two DB9 connectors femal SRW2024 are 1 to 1.

  In other words easily available cable with the following pinout.

  1-------------1

  2-------------2

  3-------------3

  4-------------4

  5-------------5

  6-------------6

  7-------------7

  8-------------8

  9-------------9

  Best regards, Dave

• After having added THAT MSAD can not connect to the console

  Hello
  
  We have added a new security provider in weblogic (OBIEE 11 g), after rebooting the server, we can not connect to the weblogic console.
  When we enter username and password, it crashes.
  
  How do they get the security without connection provider in the console?
  
  Thank you!

  Neal, you need the admin credentials to connect to the server and make the changes.
  Because you can not even connect, it's the only way... If you want to make the changes for you can send me your config.xml file

  [email protected]

• After replenishment provider, I can not connect server admin console

  I try to incorporate weblogic and active directory. I want windows users to move pages permitted without enter the information to connect (Single Sign On).
  
  I found a document and follow up step by step. Finally, I created the new 'the affirmation of identity Negotiate provider' and reorganized at top of the page of the suppliers.
  
  After doing this, I restarted weblogic. I can start/stop weblogic admin server but I can not connect it.
  
  Is there a way Undo last change or reorder the list of suppliers without connecting to the management console.

  You can edit the config.xml file located in the directory: /domains//config.
  At the opening of this file you a configuration of the Security section, for example

  
      VideotheekDomain
      
        
        
          AuthenticatedUser
        
        
        
        
        
        
        WebLogicCertPathProvider
        myrealm
      
      
        
          VideotheekAuthenticator
          OPTIONAL
        
        
          VideotheekRoleMapper
        
        
          VideotheekAuthorizer
        
        
          VideotheekAdjudicator
        
        
          VideotheekCredentialMapper
        
        
          VideotheekCertPathProvider
        
        VideotheekCertPathProvider
        false
        VideotheekRealm
      
      VideotheekRealm
      false
      {AES}EyLBChncTct8/0DuKKCkAdg13ujHovQSHjD6PTD9bc7DfKSY777WjbqdyW8whpN7pcluwVVzIghPsFhKbIQLmwOCiUSAAXTUBVKZbyjT7govQdq2Hup+6bhZuUVCXVG+
      weblogic
      {AES}/uoSrPZVXaUKmKFE3Yre0hhHzblkgZI8tw/i2m61QKk=
      false
  
  

  Here, you can remove the configuration you did.

• Can not ping so allow the engine to Base on Windows Server R2 filtering 2012

  Hello

  My windows platform is Windows Server R2 2012.

  My problem is that I can't ping the server during execution of the server BFE.

  I had already opened the ICMPv4 and v6 in the inbound rules. I also had to open inbound TCP 3389 port.

  I have once again allow all traffic entering the firewall rules.

  I tried to ping; error - request time-out

  I tried Telnet; No output.

  Can I know how to activate the ping while the BFE is running?

  Thank you

  Kind regards

  Aghiles

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Established but LAN-to-Lan tunnel can not ping to a host on the inside

  We have two cisco vpn concentrator (3005).

  Behind, we use 172.20.167.0/24 (Headquarters)

  Behind, we use 172.20.184.0/24 (remote desktop)

  We are starting to do a lan-to-lan tunnel, the tunnel establishes no problem.

  the only problem is that I can ping only the inside interface of the

  hub of central administration. I can't ping (or other

  communicate to) hosts

  on each subnet.

  On each side, you must make sure that all your hosts know that the road to the other network is by the local hub or using static routes on each host, or adding routing appropriate on any device is your default gateway.

  HTH

• Comments can not ping host in a guest only network

  Hello

  I have a Win XP SP2 guest OS running in VmWare Workstation 7.1.0 build 261024 on a Win XP SP3 host OS.

  The virtual machine network is configured in the Config setting.

  Problem: Can't ping guest operating system host OS, but the other way works, I ping guest operating system of the host.

  Here are the details of config:

  Host config:

  IP address: 192.168.1.100

  subnet mask: 255.255.255.0

  default gateway: 192.168.1.1

  Config of comments:

  IP address: 192.168.117.128

  network mask: 255.255.255.0

  default gateway: it is empty

  DHCP server: 192.168.117.254

  Configuration of Vmnet1:

  IP address: 192.168.117.1

  NET Mask: 255.255.255.0

  default gateway: white

  When I ping 192.168.1.100 (Host IP) or 192.168.1.1 (Default Gateway) of the customer (192.168.117.128), I get a message from Destination unreachable in both cases. Please advise on this issue.

  Kind regards

  Neon

  Welcome to the community,

  Since it is a host-only network, you can test only the vmnet on the host (192.168.117.1) adapter.

  If you want to be able to access the other IP addresses, you must configure the NAT is connected by a bridge.

  André

• Can not install IIS services manager, receive message management console must be installed before installing the support. Where is the support in Vista? l; Ed; e

  Try to install the Internet Information services manager
  Received message the IIS Management Console is required.
  The Console where in Vista Home Premium?

  Thank you

  Hello

  For assistance on this issue, you can ask your question in the link below.

  http://forums.IIS.NET/