IrDA: no link with the other laptop
I have a problem with IrDA.When I try to connect with others
laptop computer that nothing happened. I have Satellite.Maybe from Toshiba a problemm with settings there?
I would appreciate an answer as best as possible.
Hello
Check if Device Manager infrared is recognized and active properly. If there is no entry means that IrDA is not available on your device.
Tags: Toshiba
Similar Questions
-
Bug trying to create the link with the Cyrillic characters in URL
I'm transforming words in my text on the links, but with Cyrillic characters in their URL (such as https://en.wiktionary.org/wiki/ хорошо). The problem is that, depending on how create the link, the page refuses to accept the URL.
It's my preferred method (which accepts not the Pages):
- Write or select the text to be transformed into link;
- Press cmd + k;
- Paste the URL (https://en.wiktionary.org/wiki/ хорошо) in the field;
- Hit enter or click out;
- When I check the link, it is www.apple.com.
The strange is that other methods work very well.
1 against nature (accepts Pages):
- Delete my word;
- In its place, paste the URL (https://en.wiktionary.org/wiki/ хорошо);
- Hit the space bar (a link is created automatically with the correct URL);
- Edit the link that is created and change its text;
- When I check the link, he kept correct.
2 against nature (accepts Pages):
- Write or select the text to be transformed into link;
- Press cmd + k;
- Find a way to build a version with my URL (https://en.wiktionary.org/wiki/%D1%85%D0%BE%D1%80%D0%BE%D1%88%D0%BE) escape sequence;
- Paste the URL with escape sequence in link field;
- Hit enter or click out;
- When I check the link, ironically, is хорошо https://en.wiktionary.org/wiki/.
To stretch more:
- Editing a link created successfully (with any success methods above);
- Changed its URL (from хорошо https://en.wiktionary.org/wiki/ to https://en.wiktionary.org/wiki/ плохо)
- Hit enter or click out;
- When I check the link, it's still хорошо https://en.wiktionary.org/wiki/;
- Finally edited and changed its URL still once, now remove the Cyrillic (https://en.wiktionary.org/wiki);
- Press enter, click out and he finally accepted the URL.
Pages seems to be denying the creation of links with the URL that contains Cyrillic characters (only?), but exclusively through his little creation of link popup. I think it's a simple problem, but I'm sure it's very annoying.
Everyone knows the same?
Cyrillic characters in the range of table encoding UTF-8 code points u + 0400 - u + 04 FF are represented by two bytes. These people must be encoded as a percentage (read the two paragraphs of the current standard of article), as the Pages v5.6.2 will convert automatically URI to this encoding for you in the link Inspector. It will simply ignore what it considers incorrect URI links, they are Cyrillic, or even English.
Use what is easier for you, and that Pages v5.6.2 accepts.
-
I have a HP Deskjet 3050 a J611 all-in-one. I have used this printer with the same laptop that were purchased together.
He was works fine, but now when I try the CD to install, an error message comes up with cannot load drivers or cannot find the port to monitor? I tried everything to implement without change.
Have you tried to download the drivers from the Web site. Here is a link that will help you with it. http://goo.GL/BVOOg
-
my up to date iMac can't read installing lightroom 5 dvd I received for Christmas, the dvd player works fine with the other dvd, is it possible to download the program with the serial number of the dvd?
No need to worry about the disk version. He would just install an update anyway once it has been installed. Download from the link provided below and use the serial number, you need to activate.
-
Pencil of Apple works with the other iPads, or iPad pro?
Pencil DDoes Apple works with the other iPads, or iPad pro?
It works with the Pro
-
all my data records on the local disk c, how to share the data with the other drive, local drive d.
Hi Jasonbichard,
1. what type of drive is D? Is - this another partition on the same disk?
2 Windows operating system you are using?
You can change the location of the disk to save the data in the d: instead of C: and check if it helps.
a. navigate to the location (username) C:\Users\.
b. right click on the folder that you want to change the location, and then select Properties.
c. click on the location tab and change the location to D: drive.d. click on apply and Ok.
-
My old laptop has ceased to exist. How can I get permission to install operating system on a new PC? I provided with the old laptop installation discs, but permission to install them on the new PC is denied.
original title: operating systemMy old laptop has ceased to exist. How can I get permission to install operating system on a new PC? I provided with the old laptop installation discs, but permission to install them on the new PC is denied.
If the installation provided with your Windows computer discs was preinstalled on the computer - it is OEM and cannot be moved. You can move Windows to another computer if you buy the retail version.
You can move the windows on a new computer
If it's a full license or upgrade retail - Yes. You can move it to another computer as long as it is installed on one computer at a time (and if it's a version upgrade the new Windows computer must have its own license of qualification). The previous Windows installation on your old computer must be formatted or deleted. You will have to perhaps call Microsoft and explain what happened to complete activation. Turning it on the second computer will automatically be in effect 'disable' the license for the first computer.
If it's an OEM license - don't. OEM licenses, including Windows preinstalled on a computer before purchase and Windows purchased separately, are related to the first computer, they are installed on and cannot be transferred to another computer. To install Windows on another computer, you will need to buy another copy.
-
never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!
How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their way of doing recovery disk/s.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
See you soon.
Mick Murphy - Microsoft partner
-
How can I share 'My images' with the other user accounts on my computer?
How can I share 'My images' with the other user accounts on my computer?
where are the 'experts' on these forums adverstised? I can't get an answer to a simple question. Does anyone know how to do this?
Here we are, ok, I'm not an expert, but try this:
Right click on 'My images' > share > specific people... > select that you want to share this folder with.
...
After that, try to connect by using a different account. If you will not be able to open C:\Users\"FirstUser"\Pictures, you try to extend the network in the left pane of Windows Explorer > expand ComputerName > expand users > expand "FirstUser" > photos
-
Streaming music stutters after clicking on the links in the other tabs in the same browser
New Sony Vaio - Windows 7 native - streaming music stutters in the first tab when you click the links in the other tabs in the same browser
I'm streaming Pandora in A tab in my new browser IE 8 on my new Sony Vaio Windows 7 machine. Whenever I click on a link in another tab, there is a slight stutter in the Pandora streaming. Is there a way to fix this?
PHB
try to bring up a new browser window (ctrl-n) and let the Pandorawindow on its own and in the background.Friday, June 11, 2010, 23:37:38 + 0000, PaulHBurton wrote:>>> I'm streaming Pandora in A tab in my new browser IE 8 on my new Sony Vaio Windows 7 machine. Whenever I click on a link in another tab, there is a slight stutter in the Pandora streaming. Is there a way to fix this?>>>> PHBBarb Bowman
-
When I click with the left button of the mouse on the unique tool, open the window with the other instruments
Mohito Hi, this morning, I solved the problem by trying to support. I realized that the problem was in mice, because the click rate is at its highest level, and then click the instruments was like if he did 2. I will now set the minimum speed of the clicks.
Thank you
-
I just updated my system to yosemite 10.10.3 software. I don't seem to be able to establish links with the APPs on my desktop creative cloud. I have just a spinning wheel?
Does not open App | Wheels of progress turn continuously
https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-app-doesn ' t - open.html
-
my computer laptop wifi works with other modems. and my modem works with other laptops. they have one problem with each other.
I don't know why, please help me...Hello Omar.
Thank you for keeping us posted.
It seems that you did not try the method 2 and 3 after running the troubleshooter from network. Please, try it both ways and see if that solves the problem.
Reply with the results. We will be happy to help you.
-
Project of restoring links on the other computer, with the ext hdd same source files
I was working a project with all the source files for the project on an ext hdd. This machine in particular, then crashed and I have more access to it. data recovery after extensive (and expensive), I got the program from the old pc files and some of them include the first pro files. Is it possible to link these data, creation of a new pro, always the same machine using the ext hdd with the source files? Thank you
That's the advantage of keeping your external media.
Just open the project first on the new computer. So you should not need to be reprinted media if the external drive has not changed its name from Volume and is saved as the same drive letter (PC).
Worst case, when you open the project of the missing file dialog box will open. Make sure to repeat others is checked and navigate to the folder / outside looking.
Once reconnected, save the project and then...
go and drop your auto save preferences to the external location, so you don't have to retrieve project files crashed in the future!
-
brother printers are compatible with the HP laptop
My brother MFC-7420 printer is compatible with my new HP laptop? The software is not installed. In fact, any other software, I tried to download from a CD will not be installed. Y at - it secret inatalling software on HP laptop? It was so easy on my old gateway.
Hello
Welcome to the HP support forum. Brother printer is not an HP product. Normally the operating system on your computer (any brand) dictates the compatibility, not the brand of the computer. Please download the driver from the following link for the operating system and install on your computer
http://support.brother.com/g/b/downloadtop.aspx?c=us&lang=en&prod=mfc7420_all
Kind regards.
Maybe you are looking for
-
convert hp4294a drivers for hp 4195 has
Hi all I have problems with a code. I already have one that does exactly what I want, but includes the drivers of hp4292a impedance Analyzer, and my camera is a hp4195a Network Analyzer. If anyone knows how to convert the code without interfering wit
-
Hello. I just bought a dualbooting Z710 and I'm with Windows 7 Professional 64 bit. I downloaded all the drivers on the homepage for him, and they work all; but the wireless driver. Can someone help me please and wwireless operate? Thank you.
-
I can't get past the blue screen on my PC. I tried to reinstall the system, but all I get is blue screen as described above with the "unmountable_boot_volume" error or the display advanced options when I restart my pc and press F8 immediately. I tr
-
Hello I had a problem with my PC, so I restore using an image that I got from my pc a little backward to aid once back in windows (Windows 7 pro) and I went to run repair by using the windows installation disc and select fix a couple of percents(1/2%
-
Email from Windows 7 and Vista
I can't find my e-mail files Vista after his conversion to Windows 7. All my other files were saved successfully during the conversion, so I know that emails are there, but where?