is a signatory server is in maintenance?

Similar Questions

• what I do on 'server in code maintenance?

  When trying to play a game, a message comes on saying "your server is in code maintenance" and turns off.  What does that mean?

  Hello

  What is happening on a game site?

  Server maintenance is to keep a server updated and running a computer network can run smoothly. Now correctly a server is usually the task of a network administrator, and it is essential to the performance of the network. If maintenance is not carried out on a computer network, the network to be small or large, usually application software will not work as well as expected. In some cases, a network can same experience of total or partial network failure if proper maintenance is not performed.

  Have you contacted the site administrator of games?

• License available when one of the ESX Server is in maintenance mode

  The available license count changes if ESX Server is added in maintenance mode? I think that the answer is Yes, but I want to be sure of it. Unfortunately I can't test this in my environment.

  I have ESX 3.5 update 5 and VC upadate 6

  Thank you

  I just tested it, and the number of licenses available for my 3.5 servers has not changed after that one has been placed in maintenance mode.  I wouldn't really expect him if she is always powered, but unfortunately I can't supply a stop for the moment.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Sync keeps telling me that the server is in maintenance, but official status page says otherwise.

  Whenever I launched Firefox since 14 November (or almost), I get errors in synchronization.

  Official status page: https://services.mozilla.com/status/

  Example of error log: https://onedrive.live.com/redir?resid=90EF9D0CFFFF0B22! 50647 & authkey =! ACUOT1NEZTynJsk & ithint = the file % 2ctxt

  I can do about it, or the synchronization server is really low?

  Hello Toa_Of_Justice, it is currently a problem with the server (nothing that you can do at your end to tackle this problem). If you wish, you can follow along the bug #1100162 to move forward on this issue...

• cannot connect you to Charter E-mail error msg says session is blocked by the server or for maintenance

  This account can log on by logging in through the Charter. NET.  We love using Windows Live Mail, because we have access to all accounts of e-mail at once. This error began a few months ago, and Charter insists that, if we can connect through charter.net that the problem is with windows live mail.  I deleted the account and re-entered all the information, but still not the same error when you try to connect.  Normally, a sign-in is not necessary. It's frustrating to start. Can anyone help?

  Hello

  For a more specialized on issue of Windows Live Mail help, post your query on the Windows Live Forum.

  Windows Live Forum - http://windowslivehelp.com/

• The server is under maintenance.

  Just bought lightroom, but cannot download it. Help please!

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -Membership questions and problems https://forums.adobe.com/thread/1146459

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• I'm not able to use the Sync feature. He told me that she is undergoing maintenance and it will automatically resume. This has happened for 2 days.

  The error message I get just says the following:

  Sync has encountered an error during synchronization: The Firefox Sync server is under maintenance. Sync will automatically resume.

  I hope you can help out me.

  Daniel

  I do not use sync myself right now, but I see no reports that the service is inaccessible. Note that you can check the status of the server with

  • http://status.Mozilla.com/
    • http://status.Mozilla.com/11627/149178/sync-%5BBasic%5d

  To see firewall tips

  • Configure the firewall so that Firefox can access the Internet

• Updated to the Server 5

  I will start by saying that I am in no way educated on from a server or a maintenance of way I should be. This may be the problem #1.

  The company I work for just improved servers to a box of MacMini running 10.11 and Server 5. I created a folder on the server that hosts thousands of files of art which the company can access easily and work out of. But for the life of me I can't understand why no one can search for a specific file.

  Is that all that I'm missing?

  The first question would be how are you managing access to files on the server?

  Using file sharing in the application server or via file sharing preferences and

  Finder?

  You should use the Server app to control all access.

• Print Server 2003 SP2 to Windows 2008 R2 migration

  Hello

  Currently I have a Windows 2003 SP2 print server which is maintenance of our facilities, workstations are Windows 7 (x 64).   I would like to migrate all the information of the printer (printers, queues, pilots) a newly built Windows 2008 R2.  Someone at - it a common instruction set to allow me to do this?

  Thanks in advance,

  Jim v.

  Please post in the appropriate Windows Server Technet forums:

  Technet forums - Windows Server

• How to upgrade vcenter host when the host needs to be in maintenance mode

  Hi, I have a host 5.5 with 3 VMs (2 production servers and 1 Server vcenter). Now I see for updating the host using vcenter Update Manager documentation is quite simple. The thing I don't understand until you can fix, the esx host must be in maintenance mode, which means no VMs, including the vcenter server, which is the only way you can do a right click on the host and choose restore. Now how can I fix if the server is in maintenance mode and my vcenter server is down?

  I have the vsphere client installed on my laptop, version 5.5, but him, I did not have the remediation option. How can I put my 5.5 esxi host?

  Thank you

  With only one host in place and vCenter Server as a virtual machine running on this host, you cannot use Update Manager. Your options are either interactively update the host using a CD or update patch / the host from the command line using esxcli.

  André

• The mode of maintenance ESX through the vCLI

  I wonder if it is possible to hire a full maintenance ESX mode using the vCLI.

  There are at least two controls available, but non of them wishes to migrate virtual machines to other ESX hosts running.

  -However - possible thats using the GUI of vCenter. If you enable maintenance ESX in UI mode, running the THAT VM will be migrated before the ESX Server is in maintenance mode.

  Unfortulately VM migration manually through the vCLI could also not an option, given that DRS could start moving another candidate VM back to the ESX Server, which should enter into maintenance mode. To avoid this, should also stop the automated mode of DRR.

  It would be great, if there is a command or an available option, which would make all this automatically. Since it works with the GUI, it shouldn't be so difficult start this process also the vCLI.

  Perhaps it is already implemented - and I don't know about it. So any advice would be more than helpful.

  Otherwise: are there other ideas (scripts may be already available), which would help here?

  In fact, there are a variety of scripts provided with the vCLI that many are not aware of called "vSphere SDK for Perl utilities" and the other that hostops.pl allows you to perform various operations of the host against a specific host ESX (i), unfortunately the version implemented by VMware does not properly a vCenter cluster maintenance mode and therefore if you used He would have not evacuated running virtual machines.

  Quickly, I wrote my own version which takes account of vCenter, this script must be run against vCenter with a list of host ESX (i) to perform a certain operation and the latest version of the script, it supports the two enter/exit maintenance mode.

  Check out this script for instructions/requirements:

  hostOperations.pl

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• VMotion after putting the host in maintenance mode

  I would like a way to put a server esx in maintenance mode and let it automatically script vmotion guests to other hosts. It's about default behavior in the GUI, but when I use set-vmhost-maintaining state in the powercli, the host will just wait until all the vm is turned of / of are migrated manually, before going to interview.

  An easy way to achieve this, without loop through all the vm on the host?

  Thank you

  Maikel

  Hello

  Current behavior of the whole-VMHost (in vSphere PowerCLI 4.0) is an error report if it are turned off.

  Game-VMHost myHost-Maintenance State

  Game-VMHost: 15.10.2009?. 17:47:22 set-VMHost BAECC66D-9238-4AA3-829 a-76

  0E195F7DF1 there are one or more powered on virtual machines on the host myHost. The host is in maintenance mode once all virtual machines are turned off.

  On line: 1 char: 11

  ++ Set-VMHost< -vmhost="" myhost ="" -state="">

  However you can use the HostSystem.EnterMaintenanceMode method as a workaround.

  $h = Get-VMHost myHost | Get-View -Property Name
  $task = $h.EnterMaintenanceMode_Task(-1, $true)
  $task | Get-ViObjectByVIView | Wait-Task
  

  Here's what the SDK documentation says on the migration of virtual machines

  Operation not directly initiate evacuation operations or power off virtual machines. However, if the host is part of an active cluster with VMware DRS, DRS provides recommendations for migration to evacuate VMS under tension. If the DRS is in fully automatic mode, they are automatically on demand. If the host is part of a cluster and the task is published by VirtualCenter with evacuatePoweredOffVms set to true, the task will not succeed unless all the virtual computers turned off are reregistered to other hosts. If VMware DRS is enabled, VC will evacuate VMS power off automatically. The task is cancelable.

  Kind regards

  Yasen

• What deos acually maintenance mode do?

  Hi can someone please explain what is what do the maintenance mode? What is his puprose its still not clear for me.

  Kind regards

  Khurram Shahzad

  Have a server ESX in maintenance mode will prevent users from virtual machines on this host or fast to this host vMotioning - very important if you have distributed to administrators and especially important if the host is part of a cluster DRS/HA - it will prevent the vms DRS automatically start or fast to this host vMotioning and gives you the method to lower your esx server without causing an HA event.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Drivers for Extensa 4420 - service not available?

  Hi people,

  I've updated a laptop Acer Extensa 4420 of Vista to Windows 7.  I tried for over a week to download drivers Windows 7 x 64 for this PC, but whenever I select Windows 7 x 64 I get this message: "Service unavailable".

  For most of my attempts, the page would default to display the Windows Vista x 86 drivers.  Today, he is unable to do it again.

  I called Acer technical support and provided my SNID.  This PC is out of warranty, if Acer will not take my call.  Their automated system routed me to a third party.  When I explained the scenario, the agent told me the server is under maintenance and I should try again in a few hours.  When I said that I had tried for days, he suggested that I call Acer.  He gave me the same number I had called to him.

  This seems to be a recurring problem with a lot of messages on the same subject.  User Laurent_14 wrote that the Australian site was working.  As of today, it is not.

  I've seen users suggest clearing cache Java or temporary Internet files.  In fact, I tried to download the drivers on the newly installed Windows 7 x 64, before visiting other websites or install any other software.

  How do I get the drivers for an older Acer?

  Thank you

  Bill

  Hi all

  I checked yesterday and today, I was able to pull up of drivers on both models. The problem was reported last week and we will continue to monitor our downloads section.

  Cory

• Reuse a RAID disk and hot spare procedure

  My questions are for a PE R720xd with the PERC RAID internal H710P controller.

  I have replaced several RAID drives in the past, but I never did this before, so I was hoping to confirm my procedure for hard drives hot swap. A drive failed on one of my live servers. In the past I would always bring back the server during a maintenance window and replace the drive by using the configuration utility to make sure everything went correctly. This particular server has become a system of very high availability, so I was hoping to use for hot spare option do without bring down the server.

  The other issue is that Dell is not in stock on the disk, I need so I intend to use a same car I replaced recently on a server off-production that has already been fixed in a RAID1 in another Dell R720 Server table. Any time, I have never replaced a RAID drive, I always used a new drive out-of-the-box, so I'm also not 100% on how to prepare the drive to use for a new RAID array.

  I thought I am brings the donor server down and come off the drive I want to enjoy this the RAID array server using the configuration utility. So a question is - is there anything else I need to do preparation used in car for use in the new table?

  With respect to hot-swapping which lead to the new array, is it really as simple as just popping one out and put a new in? Can I do to confirm it has taken - apart from just confirming that the lights blink like crazy during synchronization?

  Thanks for your understanding!

  C.Short,

  You can switch the drive, but it will be not just to rebuild there is data on the hard drive. So when this disc is inserted, it will show foreign. You will need to do is to boot to the controller (Ctrl + R) and then CLEAR the foreign Configuration. Once completed, then you will be able to rebuild the disk on the virtual disk, you can do the BIOS of the controller, or from the OpenManage web interface (depending on the operating system).

  Let me know if it helps.