Drivers for Extensa 4420 - service not available?

Similar Questions

• Windows 8.1 for Extensa 4420 display driver

  I have an Extensa 4420 that I've upgraded to 8.1 Windows in a dual-boot with Windows 7 configuration.  In the process, I lost 25% of my pixels of the screen when running Win8.1.  When I run Win7, the system gives me a screen of 1280 x 800 pixels and detects the Radeon Xpress 1250 GPU.  When I run Win8.1, the system gives me a screen of 1024 x 768 pixels and insists on the implementation of "Microsoft Basic Display Adapter."  The screen is completely filled, but it is distorted and "clumsy" in the search.

  So I guess the question is, is there a driver somewhere for the Radeon Xpress 1250 GPU that works for Windows 8.1, and, if so, how can I force Windows 8.1 use this driver?  FWIW, I tried to update the driver using Device Manager, but I find the latest driver is for Win7 (on acer.com), and Win8.1 don't like it.  AMD/ATI does not seem to have updated all drivers for this specific GPU.

  I suspect that I should give up on Win8 to this laptop, but it might be a good place to 'adapt' to the Win8, if I could make the display look better.

  DRM for the previews.

  John B

  the system is too old with drivers for xp vista and 7

  Acer does not release from Win8 drivers for this system and not supported

• installed windows 7 64-bit on the Acer Aspire E5-573 but drivers for WiFi, VGA is not found

  I installed windows 7 64-bit Home Basic but drivers for WiFi, VGA is not found on the Acer site.

  When installing driver VGA of Windows 8.1 of intel Acer site for E5 - 573 on windows 7 64 bit OS then camera photo and graphic development works but USB ceases to function, another camera doesnot work.

  Customer service Acer told me that it will support only simple windows version 8.1 Professional and non-windows 10.

  Please suggest drivers for WiFi, Bluetooth, VGA etc for windows 7 64 or 32-bit.

  1 Atheros QCA9377

  https://www.Atheros.cz/Atheros-wireless-download.php?chipset=104&system=5

  Click on the "click to Download" and wait until the download starts

  2 Intel Management engine

  Try this

  https://Downloadcenter.Intel.com/download/24499/Intel-me-10-management-engine-driver-for-Intel-NUC

  or this

  https://Downloadcenter.Intel.com/download/22093/Intel-me-8-management-engine-driver

  3. realtek card reader

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

• Error code 28: the drivers for this device are not installed for Ethernet controller

  Original title: I received an error message for, controller ethernet, the drivers for this device are not installed. (Code 28)

  I don't know how to install the drivers for ethernet controller, and I don't think that I have a CD for it. And I don't know where to go.

  Hi jhawkerchic,

  1. What is the number of brand and model of your computer?

  To resolve this problem, you must install the latest version of the drivers for the device.

  You can check the manufacturer's website and download and install the latest version of the drivers available for the device.

  You can see the following article for more information about the error Code 28:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The drivers for this device are not installed. (Code 28) for the ALL-IN-WONDER RADEON 7500

  I ran a windows update and a hardware update for ALL-IN-WONDER RADEON 7500 was available. I wasn't sure what it was, but I did research some information about drvier... or windows hardware and device driver has informed me that it detects what device(certain hardware) I have on my computer to install the update. (I don't know if it's true) anyway, since then, when I start my computer, the 'new hardware found' window. After investigating on I found it cause the ALL-IN-WONDER RADEON 7500 (I don't think I know what it is). There was my this info in my device (6 times) Manager: its an unknown device located in the ALL - IN - WONDER RADEON 7500 and it states that "the drivers for this device are not installed. (Code 28) "what is it and how to fix it." I don't know if I'm to disable or uninstall. As I said, these updates I got Windows update manager and I'm guessing that it was not successful.

  That is, what it does and how can I solve this problem?

  Thanks in advance

  Try to go to this link which is AMD and download the drivers for it.

  http://support.AMD.com/us/psearch/pages/psearch.aspx?type=2.5&product=2.4.1.3.14.3.2&ContentType=GPU+download+detail&OSType=Windows+XP+-+Professional%2fHome&keywords=&items=20

  The question to be a tunner TV that you have installed in your computer that is missing the drivers at startup. You receive the error because when your computer starts, it loads this device to make it ready for use, when you want.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• HttpConnection MDS Service not available

  Hello

  Ive deployed an application to my Blackberry 9700.

  When I test the app I get an error ' MDS Service not available: u12f.

  I don't get this error when I use the Simulator.

  I use the following code.

  factory = DocumentBuilderFactory.newInstance();
  builder = factory.newDocumentBuilder();
  httpConnection = (HttpConnection) Connector.open(url+ ";ConnectionTimeout=9000");
  inputStream = httpConnection.openInputStream();
  document = builder.parse(inputStream);
  

  Strange thing is I have access to the internet and my phone is running through BES.

  What is a proxy thing? Y at - it code to determine that the device uses to access the internet?

  Please help me

  Thank you

  Ah ok, I realized that blackberry can connect to the internet in a number of ways, and the program should check for the latter.

  The answer of

  http://blog.accelgolf.com/2009/05/22/BlackBerry-cross-carrier-and-cross-network-HTTP-connection

  Thank you

• UTL_MAIL works do not, but apex_mail... any ideas? (SMTP transient error: 421 Service not available)

  Start

  () UTL_MAIL. Send

  recipients = > ' [email protected] ',

                 sender       => ' [email protected] ',

  subject = > "this is an issue."

  message = > 'This is a message');

  end;

  ORA-29278: SMTP temporary error: 421 Service not available

  ORA-06512: at "SYS." UTL_MAIL", line 654

  ORA-06512: at "SYS." UTL_MAIL", line 671

  ORA-06512: at line 2

  Start

  apex_mail. Send

  (

        p_to       => ' [email protected] ',    

  p_from = > ' [email protected] ',  

  p_subj = > 'this is a topic. "

  p_body = > 'This is a message'

  );

  apex_mail.push_queue ();

  end;

  Works very well.

  (of course, I use the correct recipient/sender names).

  For what it's worth, I have a second server with the same ACL settings and utl_mail is working on that one, but I don't know what is different.

  Any help much appreciated.

  You will get an ORA-29278 if you smtp_out_server instance parameter is not assigned to a working SMTP service.

  --

  John Watson

  Oracle Certified Master s/n

• Laptop HP 250 G2: the drivers for this device are not installed. F0Z43EA (code 28) - #ABT

  Hello

  I get this error:

  The drivers for this device are not installed. (Code 28)

  model: HP 250 G2 Notebook PC

  Model number: F0Z43EA #ABT

  PCI\VEN_10EC & DEV_5229 & SUBSYS_218F103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_218F103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00

  How I solve the problem?

  thnx

  Hello:

  You need this driver for the card reader:

  Download and install the driver first on the list from the link below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

• "Look for the update is not available at this time. Try again later. »

  I use a Photon on the Sprint 3 G EVDO network. When I open the settings app and click the option to check the software update from Motorola, the following screen appears: "look for the update is not available at this time. Try again later. "When I'm on a Wi - Fi network, a similar message appears (no screenshots):" your device is up to date! No update is necessary at this time. "Can someone please provide more information about what exactly is the message originally in my screenshot below to appear? Thank you for your help.

  

  If you go to Menu > settings > Data Manager > delivery data > social apps > Sync only over wifi. If this box is checked, and that you are connected to 3g / 4g and no wifi, you will get the server is not available because you are not connected to our servers. As soon as you connect to the wifi it reconnect to our servers and see no upgrade is available or an update if one is available. Your phone works as expected.

  Mark

  Support Forums Manager

• The drivers for this device are not installed. (Code 28) __This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  I HAV these two errors in my drivers and windows cannot update, can any body healp me?

  Hello

  What devices are - if you can not tell what is the name, then you can specify the category of
  Device Manager - or both?

  --------------------------------------------------------------------------------------------------------------------

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
  ---------------------------------------------------------------------------------------------------------------------
  The drivers for this device are not installed. (Code 28)

  To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.

  ==================================================================

  Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.

  References to Vista also apply to Windows 7.
  
  If they show upward then try to manually install the drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error message "revocation information for the security for this site certificate not available. Do you want? [Yes] [No] [View the certificate]

  For awhile, I got the dialog box with «security alert "revocation information for the security for this site certificate not available.» Do you want? [Yes] [No] [View the certificate] ". » I know that many, if not all, sites are OK because I used them several times in the past.

  I tried different "fixed" found by Google "revocation information" and nothing solves the problem - what is.

  When I try to make various updates, not related to this problem, I can not download updates due to a security problem.

  Suggestions for a computer challenged the user? Thank you.

  Richard

  http://www.brighthub.com/Internet/Security-Privacy/articles/82291.aspx

  read this, see if he can address your question.

• The installation source for this product is not available, ensure that the source exists and you can access (to remove Microsoft silverlight)

  I need to install Microsoft silverlight to watch films from netflix, but it is impossible to install it; but in my programs, I have microsoft silverlight (old), I think that if I remove the old program, the new microsoft silverlight will be possible to insall it. The problem is when I try to remove the old silverlight (add or remove programs) do not remove and displays this dialog box "the installation source for this product is not available. Verify that the source exists and that you can access. I like you would help me in this matter. Thank you very much. Manuel Ortega.

  Hello

  I recommend you to ask your question in the Microsoft's Silverlight Installation and Setup forum for better support.

• Uninstalling Silverlight gives "the installation source for this product is not available. Varify that the source exists and that you can access. »

  I can't remove Silverlight.

  I want to update to Silverlight. When I try to download, the download fails and I get a message to uninstall the old version.  When I try to do, I get a message that says "the installation source for this product is not available. Varify that the source exists and that you can access. »

  I have been in this situation and tried the solution here:

  "How to manually clean a broken Silverlight installation.

  Who has not completely worked for me, however, if I pulled upward from Regedit
  (Start-> Run-> 'Regedit')
  and searched the whole registry "Silverlight", deleting keys of parenthood which contain this string. (There was a large number of them).  When I did, I was finally able to reinstall Silverlight.

  Note that editing the registry is dangerous, so make sure that you first create a backup of the registry and know how to restore it in case things go very wrong.
  "How do back up and restore the registry in Windows XP"
    <>http://support.Microsoft.com/kb/322756 >

  HTH,
  JW

• The installation source for this product is not available. The product is Adobe Professional 8

  I can't remove Adobe Professional using Add/Remove programs. I get the following error message

  "The installation source for this product is not available. Verify that the source exists and you can access it.

  Try here: http://kb2.adobe.com/cps/400/kb400723.html

  John

• Black screen - try to activate the controller PCI of communication Simple: the drivers for this device are not installed. (Code 28)

  Original title: Safe Mode

  Can run my computer only in Safe Mode, whenever I try to boot into normal mode I get a screen with lines on the subject. Cannot download even the peak "white screen" now.

  Any help will be greatly appreciated. Thank you.

  New: I get his message when trying to activate the controller PCI of communication Simple:

  "Windows has enabled this device, however, this device still does not work correctly."

  Then:

  The drivers for this device are not installed. (Code 28)

  To reinstall the drivers for this device, click on reinstall.

  Then:

  "Windows cannot find the driver for your device".

  Get you the drivers accessing a site Web on your computer or the manufacturer of the graphics card > Search a drivers and download article > search your computer or your graphics card model number > your operating system > drivers for it: either video / graphic / Chipset (according to the label)

  See you soon.