is a store must give you the drive of an operating system if you buy a computer of prestressing

Similar Questions

• Drive hard dead - new drive installed no operating system - XP key for that computer is portable hard disk newly installed?

  Changed the bad disk to another - XP key will transfer fees drive installed and how to make xp on the fresh drive?

  Sure. Just use the XP installation CD you used to install the operating system the first time. Or, if you have an OEM machine with a restore to original image:

  Most of notebooks and OEMs (HP, Sony, etc.) come with a picture of factory restore on a special partition on the hard drive. The factory restore process is normally called by pressing a key of function (such as F11) to start the computer. There will be a message as to what function key press the screen when you start your computer. You can also consult the manual of your computer or the computer mftr.'s site, or contact technical support to learn how to restore your computer if you plant from each computer mftr. He does it differently - sometimes even between models.

  These machines also generally have a utility to create physical recovery disks in case the hard drive needs to be replaced or the factory restore image is somewhat damaged. If you have not created the recovery image recovery physical and/or damaged disks, contact technical support of computer mftr. to order a set of recovery disks. It is normally very expensive, around $20-25.

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - you will need at hand MS - MVP - Elephant Boy computers - Don ' t Panic!

• How to format my hard drive as my operating system running IM?

  How to format my hard drive as my operating system running IM? I tried many ways must my computer tells me I have to stop all programs that I have running. play help as soon as possible!

  Some PC contains a hidden hard disk restore partition. If yours is one of them, this is how you return your PC to its original state.

  What is the brand and model of your PC?

  Yet, this is a pretty drastic step. There is more easy and faster to improve performance. If you do not want to give it a shot, let us know. And also tell us the specifications of your PC, type of XP, SP, etc.

  Also, you might find follows her beneficial:

  Here are the usual causes of slow:

  1. malware (malware). You need to rule out first! This page has excellent information:

  http://Web.archive.org/Web/20080610163247/http :// www.elephantboycomputers.com/page2.html#Removing_Malware

  2. some programs aimed at combating malware (for example, Norton and McAfee). Ironically, they can slow things down because they use simply much too many resources. Sometimes they cause conflicts with other programs. And their default mode is to scan your entire hard drive whenever you start. Fortunately, there are other programs of anti-malware software available that use much less resources (p. ex., NOD32, Avast and Avira).

  3. too much of certain types of programs still running in background - with or without your consent. (Then again, a lot of programs running in the background of the consequences trivial.)

  To determine each program and process, you are running, use the task (Ctrl + Alt + Delete) Manager and click the processes tab. You should be able to sort by CPU usage or memory usage for a good ideas that are resource/memory hogs. You must write the names of all the processes for future detective work (or take a snapshot and print it).

  Use these sites to determine what these programs are, and learn how configure them to not always run when starting:

  http://www.PACS-portal.co.UK/startup_content.php#THE_PROGRAMS
  http://www.bleepingcomputer.com/startups/
  http://www.AnswersThatWork.com/Tasklist_pages/Tasklist.htm

  Sometimes, it is recommended to use msconfig to configure programs to run at startup. A better, more thorough program is Autoruns:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  But before that, you must use the settings preference of the program in question. Otherwise, for some programs, they will return to the list of startup anyway!

  If you do not want to use msconfig, it can be accessed in this way:

  Start | Run | Type "msconfig" (without the quotes). Enter (or OK)

  4. not enough RAM, causing the PC too rely on the pagefile. A quick way to determine if what is happening is to open (Ctrl + Alt + Delete) Task Manager, and then click the performance tab. Then the three values under Commit Charge (k) Note: in the lower left corner: Total, limit and peak.

  The Total number represents the amount of memory you are using right now. The vertex figure represents the maximum amount of memory you made since the last boot. If these figures are lower than the value of the amount of physical memory (K), then you probably have lots of RAM. In case you want to study it more, you can run the Page queue Monitor for Windows XP:

  http://www.dougknox.com/XP/utils/xp_pagefilemon.htm

  5. you can also verify that the access mode of your hard drive has not changed from DMA to PIO:

  http://www.technize.com/2007/08/02/is-your-hard-disk-CDDVD-drives-too-slow-while-copying/

  and

  http://winhlp.com/node/10

• Can I use PXI embedded controller connected to the PC under LINUX operating system

  Hi all

  We ara tries to connect to PXI8106 (in 1042 chassis) to PC under LINUX via ethernet (cable cross at the moment), is the version of labview 8.5.

  Can I use PXI embedded controller connected to the PC under LINUX operating system?

  If Yes, where can I find its configuration in the .ini file?

  Thanks in advance.

  Hello bachir_elec,

  I'm sending you two links that I don't provide the information you need.

  Using Linux on an Embedeed PXI controller:

  http://digital.NI.com/public.nsf/allkb/821E0C115A3B4EF286257069004B8352?OpenDocument

  Configuration of your PXI Linux system:

  http://digital.NI.com/public.nsf/allkb/5CEEC941FB7B0488862573F700653B21?OpenDocument

  You can take a look?

• With the help of an operating system older Compaq is professional Windows. Internet Explorer connected very slowly. .

  With the help of an operating system older Compaq is professional Windows. Internet Explorer connected very slowly. SO I've reworded in safe mode with network and IE has worked very well. I installed Mozilla Firefox and then restarted in normal mode. Then Internet explorer would not connect. How to diagnose in safe mode. What does safe mode or safe mode with network do to help diagnose? Can someone help me solve this problem? Any help would be appreciated thanks in advance.

  Hi, Raymond J,.

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What type of internet connection do you use?

  ·         What security software do you use?

  Follow these methods.

  Method 1: As the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2: Follow the steps in the article.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  How to reset the Protocol Internet (TCP/IP)

• I have a laptop broke the rocovery disk not good ahy, I need the windows vista disk operating system how do I get the same themes?

  I have a laptop broke the rocovery disk not good ahy, I need the windows vista disk operating system how do I get the same themes?

  If Windows Vista was preinstalled on your computer, contact the manufacturer of your computer for a replacement CD. If you purchased a retail version of Windows Vista, contact Microsoft.

  This article in the Microsoft Knowledge Base has the details: How to replace Microsoft software or hardware, order service packs and updates of product and replace product manuals . Boulder computer Maven
  Most Microsoft Valuable Professional

• What is the printer that HP 7525 works with the windows 8.1 operating system?

  What is the printer HP 7525 Photo Smart works with the windows 8.1 operating system?

  Hi Alex7171,

  Yes it does, you can follow this link to download drivers

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=5286643&I

• Downloaded Windows 7 Pro trial version (previously using XP pro); currently a student of Microsoft Office 2003 version not in "all programs"; directly from the place of the app to get "operating system is not currently configured to run this application"

  Trial download using Windows 7 Professional (previously had XP pro)
  Student Microsoft Office 2003 version is no longer in "All programs" on the start menu
  Running EXCEL, WORD etc application of the subdirectory of the program file generates "operating system is not currently configured to run this application"
  Still have diskettes for installation for Office 2003, but the box with the product key is lost, this effect cannot be re - install.
  Microsoft Office does not appear in Control Panel programs in Windows 7
  How can I get Microsoft to work again without reinstalling Microsoft Office?
  If I have to re - install, how I get lost product key for Microsoft Office?
  I tried using Compatibility Wizard without result.

  Hello
  Welcome to the Microsoft answers site.
   
  The question you have posted is related to Outlook and would be better suited to the Microsoft Office community.
   
  Please visit the link below to find a community that will provide the best support.
   http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
   
   
  Thank you and best regards,
  Azam - Microsoft Support

• Why do I get the message that my operating system is not supported?

  My computer is running Windows 7-64 bit. I have the latest softwear on my iPhone and my iPad. I installed edge inspect on these devices and have the advantage of Google Chrome to inspect the installed extension. I have enter my password strengthened for both devices in the Chrome extension. Why do I get the message that my operating system is not yet supported?

  It's VERY interesting... even if I got this weird message, once I connected my iPhone and my iPad to the extension of Google, it worked! See all what I automatically in Google Chrome displays in the application of edge inspect on small devices. It's clean! The only problem I see is that Adobe needs to replace the error message with information about the use of the application.

• Portege R100 boots from the HARD drive - lack of operating system

  Hello

  I have a Portege R100 which won't the HD boot, I get the message "missing operating system".
  I don't have a compatible CD or floppy, I just about 1.8 inches for the hd, it works and I also have norton ghost 2003 is installed in another computer (a toshiba satellite A45).

  I tried to recover the drive with the help of norton and the image of the Ghost in the recovery CD, but it keep asking for a password.

  I would like to know if there is a way to use the restore with norton CD and usb driver and password screen (or where I can get the password?).

  Thank you!

  What password do you mean?

  and what recovery CD do you use? The image on the Toshiba Recovery CD is locked and cannot be extracted.

  It turns out that you cannot start or install the OS on the USB key!
  You must boot from the CD/DVD compatible player that can be connected to the PC card slot.

• Is no longer able to access the drives specified on my system

  I have a hard drive connected to my computer in auxiliary. It consists of four partitions. The volumes for these are Fat32 or NTFS. However, now my computer says the volume one of the partitions is now RAW (what is?). Anyway, I'm unable to access one of the disks. I'm told the the "file or directory is corrupted and unreadable. What can I do to retrieve the data on these discs?

  Hi Alpha_Imperious,

  1. did you of recent changes on the computer?

  2. are you unable to access one of the drives available on the computer including auxiliary hard drive?

  3. do you have security software installed on the computer?

  I suggest that you run the CHKDSK tool on all drives that you are unable to access and to check if it helps.

  CHKDSK (Chkdsk.exe) is a command-line tool that checks volumes for problems. The tool tries to repair any that it finds. For example, Chkdsk can repair problems related to bad sectors, lost clusters, reticulate files and directory errors. To use the Chkdsk command, you must log on as an administrator or as a member of the Administrators group.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  If the previous step fails, see if the problem persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

• How do you format a hard drive with an operating system on it?

  This is actual a fairly simple question, I think compared to what should probably be asking. But on the idea of the recovery discs, I think it's what I excatly. If anything on the idea of format and replaced by reformat. The computer didn't come with any disks or news or have any information. But all CD/DVD discs recovery.

  In addition, when upgrading to this day, is losing usage characteristics. Options to other programs are losing as well. Or more hidden away from the use of the actual program.

  Trying to find info to format the hard drive is not very accurate. Contact support is usually meet with updates.

  Give something to work in the ideas of features/options elsewhere and others, disable or activate is just as accurate as to what it is with or against the options and features.

  Try to work with those who don't, with or without update seems to be best with reformatting later, with a format that is better placed within the use and what features work as installed.

  Help and Support is also in the lack of many topics and listed from the first installation. Online is the only other source of info otherwise. Updated information is the lack of fitness.

  Thus, on the idea of having to reformat, I would rather just format the drive.

  You can see http://michaelstevenstech.com/cleanxpinstall.html#steps and/or method 1 in http://support.microsoft.com/kb/978307.

• Image vs cloning on the new HARD drive with an operating system already installed.

  First of all, I'm NOT tech savvy.  I apologize in advance.

  After several warnings error that my hard drive was in danger of failing, I was finally able to install a new HARD drive.  Windows has had some difficulty in installing Windows 7 to new HARD drive, but I finally found a solution.  So here's my current situation.

  I have the main drive (old) (C:\) which has Windows 7 and all my data on it (it is a Seagate 1 TB HARD drive that came installed on my Dell Studio XPS 8100).  I installed a new WD Black 1 TB HARD drive and was finally able to get Windows to download on it (it reads now like two distinct? score?) E:\ and F:\) see photo.

  

  Now, my question is this...

  I want to save all my data from my old HDD and put it on my new HARD drive.  One that I have this, I would like to remove the old Windows 7 HDD and use it as "extra" space

  Make a clone of the old HARD drive to the new since I have already installed the new Windows 7 HARD disk?

  Please advise and please keep in mind that I might say things correctly and I can't understand though if the answers are on my level.  I appreciate any help!

  OK, so here is what I would do to try to avoid problems of compatibility or driver, as far as I can:
  -Turn off your system completely and unplug from the power outlet wall
  -Disconnect the old drive in your system (SATA and power cables)
  -Place the new WD Black on the main port SATA (should be labeled SATA0)
  -Turn on your system and put your OS drive you can do a completely new installation of the operating system.
  S ' ensure that you have updated all the drivers and the operating system after the installation
  -Turn off your system and plug your old drive
  -Turn on the system in the BIOS and make sure the WD Black has the priority starting on the old HDD
  -Boot into the operating system and copy all data from the start of your old disk partition that you want to keep for the WD Black
  -Go to disk management and delete the old boot partitions and the old drive system
  -The old HDD should be your secondary drive now and you can freely move files between the two disks
  N ' have in mind that due to the new copy of the OS, you must reinstall all the games and programs in order to operate because of the new system registry

  This should put you on the safe side and prevent any compatibility issue or driver which is possible during a clone or restore procedure. :)

  Captain_WD.

• When I remove my SD card in the drive icons disappear. I have to restart my computer so they reappear

  I can solve this problem with a program or something?

  Hi jasonsweeney,

  ·         Did you do changes on the computer before the show?

  ·         Is the SD card reader built into the computer or is connected via USB?

  Follow these methods.

  Method 1: Refresh the Device Manager before restarting the computer to see if the drive icon is back. Use the option ""look for changes on the hardware.". Follow these steps:

  (a) click Start, type Device Manager , start the search box and press on enter.

  (b) right click on the SD card and click scan for hardware changes.

  Method 2: If it is connected via USB, then uninstall and reinstall the drivers of USB bus controller. Follow these steps:

  a. click Start, click run, type sysdm.cpl in the Open box and then click OK.

  b. click on the hardware tab.

  c. click the Device Manager button.

  d. expand Bus USB controllers.

  e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  f. restart the computer and reinstall the USB controllers.

  g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.

• HARD drive gone bad. How to replace the HARD drive and reinstall operating system without a recovery disk?

  I have a HP with Windows 7 Home Premium TouchSmart tm2.  The HARD drive is clicking and will not start.  Error: Device not found Boot.  I guess I have to replace the HARD drive, but how can I restore/reinstall operating system without a recovery disk?  Windows was preinstalled, and I have the product key.  Thank you.

  Hello:

  You can order a recovery disc defined by following the instructions on the link below.

  http://support.HP.com/us-en/document/c00810334

  or...

  You can download the 32-bit or 64-bit version of windows 7 Home Premium ISO on the link below and use your product key to activate the installation.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  You need a program that will be able to burn ISO files so that the DVD is bootable DVD burning. Burn at the slowest possible speed for best results.

  Then install all the drivers you need for your PC support and driver page.

  Paul