Is an extra Associative entity automatically created when we do a lot of many relationships?

Similar Questions

• Is it possible to edit the messages that are automatically created when recording a demo of software?

  I want to change standard text messages which are automatically created when recording a demo of the software.

  

  Is this possible? Where can I find them?

  This text is generally controlled by the RDL files located inside your Captivate installation folder.

  

• Why files get automatically created when to save e-mail messages as files on my backup drive?

  Whenever I have save a file of e-mail (whether as a .htm or .msg to my backup disk or shared drive, it creates a folder with the same name and an end _files.  How can I stop this?

  Hello
  • What email provider do you use?
  If you are downloading or recording of any HTML page, it will create the name of the folder because the HTML page also includes HTML support files that can be used offline.
  See also:
  http://Windows.Microsoft.com/en-us/Windows-Vista/save-a-webpage-as-a-file

• Stop LR automatically create TIFF or PSD files when opening in PS.

  Whenever I open a RAW file in Photoshop CS5 in LR3, it automatically creates and saves a file PSD or TIFF. Is there a way to stop lightroom to do this? When I used LR2, I saved these files only if I chose to. I always convert my jpg files after I am done Edit in PS and don't require not these big files lying around.

  I think that what you want can be achieved by ensuring that the versions of Lightroom and ACR in PS are compatible. Make sure you have the latest available of each accession in the Help menu of Lr and Psalm

• When I drop a table, automatic, creating dummy tables

  Hi all
  
  I use 11g
  in this regard, whnever, I drop a table, Oracle automatically creates 1 table like that name ("' BIN$ ja1wOa6kYLPgQAB/AQB5ZQ == $0" ")
  This table, I'm not able to deposit
  Similarly, when I see these table in enterprise console are not displayed
  But when I see through SqlPlus it shows the name in the list of tables
  
  
  Please provide any solution
  Thanks in advance
  
  Pankaj

  But when I see through SqlPlus it shows the name in the list of tables

  It is the BASKET in case you change your mind and want to postpone

• How to import several pictures folders, including automatically created albums?

  Hey there,

  First of all, thank you for helping me with this one.

  I use Picasa and organize semi-automatiquement all my photos on my hard drive. Given that Picasa will be abandoned, I want to spend all my photos/videos photos. What I get is, how to import a single folder in Photos and automatically creating a photo album. But I can't do with several files because I fight with Automator. I found some tutorials intestine on the web, but not for my particular situation.

  What I did (see screenshot):

  (1) departure of workflow must be the parent folder, and Automator should go in its subfolders and take one after the other.

  (2) now I need a variable to record the name of the folder. The name of the folder must be the new name of the photo album.

  (3) the final step is to Automator to import a record after another and create a photo album with the same name as the current folder.

  If I do, I have the problem that all imported as one (without subfolders) and the name of the album is always like "... / Desktop. I couldn't find solutions to this problem. Does anyone know what I need to add to Automator to do what I want?

  Any help is greatly appreciated.

  Thank you very much!

  Andreas

  

  This Applescript looks like it will do what you want

  (I found this with google, I don't have test it)

  Try on a few test first file and backup before using

  From: http://apple.stackexchange.com/questions/182493/photos-for-os-x-how-to-generate-album-automatiquement-- import

  Leading to: https://github.com/codez/ImportPhotoFolders

  What links to: https://github.com/codez/ImportPhotoFolders/blob/master/ImportPhotoFolders.apple script

  Example of

  Given the following directory structure:

  • Photos.
    • Mountains.
      • Asia /.
        • Everest.jpg
        • K2.jpg
      • Europe /.
        • Matterhorn.jpg
    • People /.
      • i.jpg
      • mejenny.jpg
    • whatever.jpg

  When you select the Pictures Directory to be imported, the following structure is generated in Photos:

  • Images / (folder)
    • Mountains / (folder)
      • Asia (album)
        • Everest.jpg
        • K2.jpg
      • Europe (album)
        • Matterhorn.jpg
    • People (album)
      • i.jpg
      • mejenny.jpg
    • Photos (album)
      • whatever.jpg

  Applescript can be found at: https://github.com/codez/ImportPhotoFolders/blob/master/ImportPhotoFolders.apple script

• Can I import this module settings to automatically create variables?

  Hi all

  I try to reuse a Labview VI within TestStand as a module of code.  There are a lot of input and output parameters, and I need to create a separate variable for most of them (probably globals file) so that I can change values dynamically during test sequences.  I see in the code module loading, associated parameters are automatically imported into the parameters of the step, but I would like to know if there is a way to automatically create variables to "convert" the parameters of the code module.  I read a few threads on the creation of dynamic variable and property magazine steps, but these do not seem to have what I'm looking for.  Please notify.  And, as usual, if it looks like I'm wrong understand how TestStand, please correct me.  I am only a few weeks to use it.  Thank you very much.

  GSinMN

  The answer is no, you can't.

  You can ask TestStand create types of complex data for you.  There is a small button next to the parameter and it will create the type definition.  However, you should always create all instances and then move those to and from the VI.

  By default, TestStand will link the error message on the wire with the Step.Result.Error.  The rest are pretty much up to you.

  I guess the question/s would be: How does he know where to create the instances?  FileGlobals? People of the country? Settings? Globals station?  Step properties?  Constant value?  There are a ton of places that seem to be the options in question.  This can be a good feature request...

• How do you get the beta version of windows 7 to solve the problem created when the auto update 0x0000c1f5 ran?

  How do you get the beta version of windows 7 to solve the problem of stop 0x0000c1f5 windows vista home edition created when the automatic update ran?

  Previous discussions about the error: ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 7 and 8 automatically creates a GPT, do I still diskpart to create the GPT if so in which situations?

  Hello

  in my thread, I asked last time how to partition 2.2 terabyte disk with TPG, so I got this response

  At a command prompt, type: diskpart to start the Diskpart utility: "Diskpart version 0.0" is displayed as well as a Diskpart command prompt.

  1. At the prompt, type: list to list mounted hard disk volumes.
  2. At the prompt, type: select x (where x is the number of the hard disk drive you want to convert to GPT). The following information is displayed: "selected disk = x '.»»
  3. At the prompt, type: new GPT to add the GPT information into the non-volatile RAM (NVRAM).

     NOTE: this step does not create the GPT partition information.

  4. At the prompt, type: create name = "efi system partition" type = efisys Size = 102 to create the Extensible Firmware Interface (EFI) partition.

     NOTE: the name can be anything you want, but if the name has spaces, the name must have quotes around it. The type must be equal to Efisys, Msres, or Msdata. If a size is not specified, the partition uses the remaining unpartitioned space. To install Windows XP, the Msdata partition must contain at least 2 gigabytes (GB) of free space.

  5. At the prompt, type: create name = "microsoft reserved" type = msres Size = 31 to create the MSR partition.
  6. At the prompt, type: create name = "basic data" type = msdata to create a partition for the unpartitioned space remaining.
  7. At the prompt, type: inspect to display the partition information.
  8. At the prompt, type: exit to leave the Diskpart utility.

  I read on the internet with a firmware UEFI, you can install windows 7 or 8 just to choose the UEFI boot disk to start the boot process and it wil automatically create 3 partitions for windows 7

  Sys, msres, msdata EFI

  and 4 partitions for windows 8

  recvery, efi sys, msres data SM.

  now my question is

  1-do I still need the utility diskpart to create the tables (partitions) as explained above, in certain situations or it wil just create the tables (partitions) automatically in all situations, I read on the internet

  .

  2. I see in windows 8, there is table (partition) extra for recovery, if I have to manually create these tables (partitions) in windows 8 what I also need to create a partition for recovery.

  Thank you

  Johan

  Hi Johan,.

  I understand that you need to know about the disk partition.

  I would like to inform you that the recovery partitions are only provided by the OEM and are found only on OEM computers.

  DiskPart is a command line that you can use to partition a drive.

  You can consult the following Microsoft articles to get a clear idea on the disk partition.

  Create a new Partition on a hard disk in Windows 7

  http://TechNet.Microsoft.com/en-us/magazine/gg309170.aspx

  What is UEFI?

  http://Windows.Microsoft.com/en-in/Windows-8/what-UEFI

  DiskPart command-line options

  
  http://TechNet.Microsoft.com/en-us/library/cc766465%28WS.10%29.aspx

  Create and format a hard disk partition

  
  http://Windows.Microsoft.com/en-in/Windows7/create-and-format-a-hard-disk-partition

  I can I repartition my hard disk?

  
  http://Windows.Microsoft.com/en-in/Windows7/can-i-REPARTITION-my-hard-disk

  Create a boot partition

  
  http://Windows.Microsoft.com/en-in/Windows7/create-a-boot-partition

  If you have problems of Windows in the future, let us know and we would be happy to help you.

• How to disable automatic query when launching a form page?

  Dear Sir:

  In Jdev 12.1.3,

  I create a form page that is based on a data control which itself is created from a ViewObject and its criteria view.

  I put the display criteria UI guidance "Query automatically" attribute disabled.

  However, when I run the form on the page every time, the query is executed automatically.

  How can I disable the automatically query when launch a form page?

  Thanks!

  You haven't checked out my previous comment, I've shared a link here?

  Anyway, it's not a bug, just a change

  You can change its value in the XML source of the viewObject (I think that the problem is for this reason, otherwise it should work)

  If you still face problem after changing this property then you can go for the second option (new link is part in the previous comment)

  Ashish

• Flash Player update is linked to the default browser?  -Flash not automatically updated when Chrome is the default

  Hello

  I managed machines for an organization where the majority of users have no administrator rights.  I put the Flash drive to automatically install updates.  In accordance with article (old)

  How the auto update feature does not work in Flash Player?

  "Normal Flash Player installations require an administrator account. However, automatic updates are executed even if the user is logged on with a standard account. »

  
  

  So I think my clients should be updated automatically to version 18.  However when I check, I see that they have not updated.  After watching cela some more I realize that when I use the control panel to check the updates that he launched Chrome, which is our default browser.  Of course, Chrome is up-to-date, because Google takes care of this.  However if I run IE and paste the URL of the version check in IE I see that flash is not up-to-date.  So, I try to run the update of IE, and when he is finished he launched a Chrome page again.  So it seems to me that Flash player uses whatever the browser is configured as default browser to search for updates with Adobe.  However this will not work if a user has Chrome as their default browser, and also has flash player installed separately for IE.

  
  

  Do you understand my point?  How can I get Flash player automatically updated when a new version is available, even if my default browser is set on Chrome?

  
  

  Thank you

  
  

  Scott
  

  Hey Piyush

  Thank you very much for this information.  So basically the feature to 'Allow Adobe to update Flash Player' does not work in all changes of the version.  I find it incredibly misleading.  Rather that engage in a cumbersome process to allow each year the opportunity to distribute flash and then create group policies to deploy, and then test the results to have these policies in place when flash tries to update itself, pay attention to the current versions of flash in order to deploy new .msi files and update our policies...

  I think I'll just remove the flash of all our systems.  It is clear that after installing flash is a continuous security risk and it is regrettable that we cannot rely on Adobe to help keep their own software update in a simple and effective way.  It's amazing to me that Google can do a better job of keeping flash updated in their browser at adobe.

  Thank you

  Scott

• ASM will automatically create directories log_archive_dest_1?

  Oracle 10 g 2-10.2.0.5 on ASM

  5.8 64-bit RHEL

  I just created a new database with custom settings. I put the location 'archive' to ' + recovery /orcl/archivelog.

  DBCA would automatically create directories ' orcl/archivelog'?

  Or I have to create the directories manually using ASMCMD?

  
  

  When I use the ASMCMD and look at directories, I don't see these two.
  

  
  

  I thought that the ASM can create them on the fly so I published "alter system switch logfile" three times. The third time, it's just a few crashes and the SQL command prompt does not return.

  
  

  
  

  Please advise!
  

  If you are using OMF you have no need to build any oracle structures file will create the folder structure.

  For example

  If you set + RECOVERY to your db_recovery_file_dest then Oracle will create the following for your archivelog location.

  + RECOVERY //archivelog

• Automatically create foldername by date (YYYY MM DD) fails in PSE10

  Using 10 items, I have a problem when importing files from my camera to hard drive.

  I want to import files in the organizer of items automatically creating a foldername as YYYY MM DD.

  If I choose this (DD MM YYYY) in the properties (camera and card reader), organizer of the elements will creat a file as YYYY MM DD.

  Because I have a lot of photos organized within the Organizer, it is difficult to find records

  by date on my hard drive.

  Hello

  There is an error in the Downloader and Adobe has released these fixes:

  Mac: http://kb2.adobe.com/cps/930/cpsid_93...

  Win: http://kb2.adobe.com/cps/930/cpsid_93...

  Good luck

  Brian

• associative entity

  How to make and see the associative entity to the Data Modeler

  There is no support for the associative entity or relationship with attributes.
  Following could be useful if you want to distinguish these entities:
  (1) create the new type of classification in "tools > preferences > Data Modeler > diagram > types of Classification.
  (2) you can name it 'Entity of the Association' and assign a unique color
  (3) define the classification of your entity type

  Philippe

• Launch pad is automatically opened when you use other applications like Safari

  Hello! I use Macbook air 13 "mid 2013 with OS X EL Capitan and recently the launch pad is automatically opened when I am using other apps like Safari.

  Anyone experience this problem and no solution?

  Thanks in advance.

  Check system preferences > keyboard > shortcuts

  Make sure that "Show Launchpad" is not checked.