is bindElementAction to multiple symbols?

Similar Questions

• The linker error multiple symbol definitions

  Hello

  I brought a DAQmx project based on Linux to LabWindows CVI 2012 PXI. After completing all the requirements of the conversion and compile successfully, I'm getting tons of the following linker errors for different modules files (just stick

  a subset of these here):

  Several definitions of symbol '_PtrToPtr64' in modules X and Y

  Several definitions of symbol '_Ptr64ToPtr' in modules Z and Y

  Several definitions of symbol '_HandleToHandle64' in modules X and Y

  Several definitions for the "_HEAP_MAKE_TAG_FLAGS" symbol in the modules X and Y

  Several definitions for the symbol '_TpInitializeCallbackEnviron' in modules X and Y

  .....

  I found this message: http://forums.ni.com/t5/LabWindows-CVI/CVI2010-clang-link-errors-with-Windows-SDK/td-p/1425690

  that points to a known issue in CVI 2010. However workaround (allowing the C99 compilation option) is already defined in my project, so this solution does not apply.

  Any idea what could cause these symbols windows.h get redefined?

  Thank you

  Some of the Windows SDK functions, can have the same name as the functions of LabWIndows/CVI. Is your Windows.h file before all the other header files? See the following article for more information: http://digital.ni.com/public.nsf/websearch/69C82671913CAA4986256E9400676E17?OpenDocument

• Exchange multiple symbols at once on a layer

  Hello

  I often just copy a sequence of images that already have the interpolation I want and it uses 4 instances of a symbol.

  When I copy and paste images on another layer, I just want to change the symbol, but I need to select a time and sharing the symbol.

  Is anyway to have a layer to modify all instances of one symbol to another at the same time?

  Thank you

  Babs

  If it is a motion tween, you can click on any pair of interpolation and swap symbol. If it's a classic tween, you can edit several images, marker will all, select all (lock other layers first) and then make an Exchange at once.

• Click on the multiple symbols to trigger an action.

  Hello

  I create a list of interactive control which requires that all of the check boxes on a page to check. On each page there is a list of boxes that need to be verified and master list on the side. Once you have checked all the boxes (symbols) on the page, the box of coresponding to the page in the main list would also get a check. Somehow, I need to connect all of the checkboxes in the list so that once they are all checked, the correct area in the main list would get a check.

  

  So far I put it in place so that every page is a symbol, use the next and previous buttons and I have created symbols that function as check boxes.

  Thank you in advance for any help you can offer.

  B.

  Ok. I got that it works like a charm. Thanks for your help!

  Here is a link:

  http://dev.speakdesign.com/Sage/13-03599/checklist.html

• controlling multiple symbols in as2

  I do pacman in as2 for fun, and I was wondering how to get several pellet mc' hittest to work. I tried to make a loop for which went through each of the balls by number i.e. pellet [i] in a loop with each ball in number pellet1 pellet2 pellet3 so on... I tried to put in the first frame of the FLA in an enter frame function just by itself.

  Y at - there anytway for a loop to work like that or do would be another way to you reccomnd each pellet?

  Code:

  with (_root) {}
  for (i = 0; i > = 3; i ++) {}
  If (pacman.hitTest (ball [i])) {}
  Ball [i] ._x = - 5;
  score += 10;
  }
  }
  }

  This ["ball" + i]

• Can I convert all my symbols of 'static', 'dynamic' without having to edit each separately?

  Hi, it seems that I can select a symbol in my symbol library and choose 'symbol options' and change the symbol of a dynamic symbol.  However, if I choose 2 or more symbols, "options symbol" are grayed out.

  It makes sense, not being able to select multiple symbols to edit, but in my case, I need to just change the type of symbol.   I need to do with approximately 200 symbols.

  Does anyone know if this is possible?

  Thank you!

  Bob E

  Probably with a script, but the time it took you to write your message and wait for a response could have been spent everything as simply working. Sometimes a brute force with manual labor approach is its weird effectively, despite being tedious.

  Mylenium

• I could hide a symbol with the name of a variable?

  I try to explain it...

  All I want to do is assign a string (the name of the symbol) to the same variable in multiple symbols:

  symbol var = "entrantes_sym";

  symbol var = "postres_sym";

  ...

  And then hide this symbol with the new created variable:

  sym.getComposition () .getStage (). $(symbol) () .hide;

  but work... help please!

  Solved! uuffffff...

  I have several symbols called onstage:

  entrantes_sym

  postres_sym

  platos_sym

  ...

  and I declare the same variable in all the symbols of the scene:

  symbol var = "postres_sym";

  sym.setVariable ("symbol", symbol);

  symbol var = "entrantes_sym";

  sym.setVariable ("symbol", symbol);

  then, inside the symbol called swipe_sym, I put this code:

  var point = sym.getParentSymbol ();

  var sym2 = stage.getVariable ("symbol");

  sym.getComposition () .getStage (). $(sym2) () .hide;

  swipe_sym symbol is a child of all the symbols of the scene.

  
  

  and the code works in all the symbols with just a few lines of code...

  
  

  Thank you.

• How can I find the symbols of multiplication and division on my Windows 7 computer

  How can I find the symbols of multiplication and division on my Windows 7 computer

  They are * to multiply and / for division.

• Can't swap multiple instances of the same symbol

  Hey!

  So, I can select a symbol and exchange with one another, but why can't I just Exchange several instances of the same symbol?

  A useless limitation don't y ' All think?

  -Dwayne

  If you're talking about the replacement of one symbol by another of the library, which is limited to one symbol at a time.  But you can extend this functionality using JSFL.  Here is a link to a tool that might work for you...

  http://spiralstormgames.com/blog/code-snippets/quick-Flash-extension-swap-multiple-element s-at-once.

  If you have a thousand things to change, you can review your design uses a dynamic approach, except the investment items must be managed manually defined specific locations.   In this way, you can simply change the link between the symbol and the programming will take care of the rest.

• Creation of multiple versions of the same symbol

  I am currently using Adobe Flash CC on my macbook pro. I am trying to create different versions of a symbol. The one I have now has a walk cycle. If I duplicate symbol and start working with it, the changes that I have to him affect the original! How can I make different versions and chronology with the same symbol without them affecting one another? I need to know as soon as POSSIBLE, because it is a project.

  Right click on the symbol in the library and click on duplicate.  This will create a symbol that can be modified independently of the original.

• Create multiple instances of a symbol in AS3

  Hello

  When we create several instances of the same symbol, can we instantiate using a single variable, or is it mandatory to use a different variable the instance?

  In the following example, the "var c:Circle" is used 10 times to instantiate the symbol of the MC.  How can those be changed or removed one by one, if all instances refer to the same variable name?

  var totalCircles:uint = 10;
  var i: uint;
  for (i = 0; i < totalCircles; i ++)
  {
  Create a new instance of circle.
  var c:Circle = new Circle();
  Place the new circle to a coordinate x which will be space circles
  evenly on the stage.
  c.x Fokker-built = (stage.stageWidth / totalCircles) * i;
  Place the instance of circle to the vertical center of the scene.
  CY = stage.stageHeight / 2;
  Add the instance of circle to the current timeline.
  addChild (c);
  }

  In your loop 'for', you do not have to declare the variable 'c' with each pass of the loop. Instead, you can declare it out of the loop, as you do your 'I' variable:

  var c:Circle;

  for (i = 0; i< totalcircles;="" i++)="">

  Create a new instance of circle.

  var c = new Circle();

  Then, given that you reuse the variable 'c' for each passage, as you have probably guessed, you cannot reference all your objects with the same variable (with the exception of the one created last) once the loop over. What I usually do and suggest, is that you put all your objects in a table for ease of access after instantiation:

  var circleHolder_arr:Array = [];

  var c:Circle;

  for (i = 0; i< totalcircles;="" i++)="">

  Create a new instance of circle.

  var c = new Circle();

  circleHolder_arr.push (c); This adds each instance to the table

  ... And when you want to do something, like delete all of your circles:

  function removeCircles(e:MouseEvent_=_null):void {}

  for (var i: int = 0; i< circleholder_arr.length;="" i++)="">

  removeChild (circleHolder_arr [i]);

  This is where you could also do other things, for example to remove earphones events and other items of battery memory

  }

  }

  btn.addEventListener (MouseEvent.CLICK, removeCircles);

• Multiple instances of the same symbol of edition

  Hi, was looking for a solution to this for a while, did not a straight answer yet. So I hope you guys can help.

  For a game of Hangman-esque I have a flash document (with CS5, but that probably doesn't matter) who has (or will have rather) a library of 26 clips that will contain a letter of the alphabet every.

  They will be inside their own dynamic text box, so I am able to change the font, background color etc at will.

  But it is even possible to edit multiple instances of a clip on the stage at the same time, without being too complex?

  In other words can I put several A, B, C etc. on the stage and get all change at the same time if someone guesses a letter?

  I know you can change instances unique of a clip, but for that you must give a name to each instance and I don't know how many of each letter I would be put on the stage, let alone how I could easily access.

  It could perhaps through classes or something? I've not really covered before if.

  Feel free to ask for more details... I admit that some I have things I write can be a little vague...

  Yes, a table that contains references to all the clips that are related functionally and when you manipulate them - loop in table and change all what you need to change on the table instances.

  I don't know what you want to learn more on...

• Styles Grep allows you to add the symbol of multiplication.

  Hey everybody,

  Did anyone used grep styles to change 5 x 6 to 5 × 6?  I tried to do, but the dialog box create a grep style is the character style dialog box. But, I can't get into a glyph. Now, I use find and search for \d+x\d+, but it will find 5 x 6 and change to x instead of changing the 'x' only. I wouldn't do a search for 'x' in a document. Just try to find a way to change 'number 'x' number' to «number '×' number.»

  Thank you

  Or you can use (?)<=\d)x(?=\d)  [that's="" a="" look-behind/lookahead="" withthe="" x="" in="" the="" middle]="" and="" apply="" a="" character="" style="" to="" scale="" and="" shift="" the="" x.="" grep="" styles="" cannot="" change="" the="" glyph="" used,="" only="" the="">

• Firefox is not make symbolic fonts.

  GFX.downloadable_fonts.woff2.enabled = true.
  Web sites can use custom fonts.
  The symbolic fonts in other browsers works fine.

  I called the big players to help you. Good luck.

  Separate the issue;
  Shows details of the system;

  Plug-ins installed

  Adobe PDF plugin for Firefox and Netscape 11.0.05
  Adobe PDF plugin for Firefox and Netscape 10.1.1
  
  Having multiple versions of a program can cause problems.
  You must remove older programs. Then download the current full installer.

• When I try to send an email to multiple recipients, I get this message: "there are non-ASCII characters in the local part of the address of the recipient. This is not

  I bought a new computer. When I try to send an e-mail to multiple recipients, now, I get this message: "there are non-ASCII characters in the local part of the address of the recipient. It is not yet supported. If please change this address and try again. "I don't know what are the non-ASCII characters, so I don't know what to do. I never had this problem on my old computer. Please explain in simple language.

  The 'local' part in the context of email addresses, the part to the left of the symbol @. The warning is a bit of a surprise, because in general the owner of a mail server is relatively free to specify the address format. There is a movement to allow the games to other characters to be used in the fields, so I'm a little disappointed to see that, apparently, e-mail does not support the latter in the local part yet or it can be your SMTP server that generates this message.

  ASCII characters ("American Standard Code for Information Interchange") are, on the whole, the English alphabet, uppercase and lowercase, as well as figures, common punctuation and case of things like the asterisks, obliques and media bars, but not of accented characters. But even apparently simple things like spaces and dashes have cousins who, at first glance, appear to be identical, but are not represented in the ASCII system. I am thinking especially nonbreaking spaces, dash and half-quadratin.

  But I don't know why your new computer must have caused these warnings.