Is DV4T 5100 supports 1600 mhz RAM?

Similar Questions

• computer laptop dv7-6b01er with 1600 mhz ram

  Hello, I have a laptop dv7-6b01er with AMD-A6-3410mx and ram 1333 mhz. It supports 1600 mhz ram? We say CMSX4GX3M1A1600C9

  I think the BIOS initially were written in 1333 for AMD, because not all receipts amd 1600... But do not write BIOS for AMD (MX) specific for 1600 is not correct...  Tomorrow start f.12 BIOS...

• Kingston ValueRAM 8 GB 1600 MHz: ram HP ProBook 4520 s compatibility

  My computer specs are as follows:

  HP ProBook 4520 s

  Intel core i3 M380 @2. 53 Ghz

  RAM: 4 GB

  OS: 10 64-bit Windows

  I want to buy

  Kingston ValueRAM 8 GB 1600 MHz DDR3 CL11 USBavec 1.5V

  https://www.microsoftstore.com/store/MSCA/en_CA/PDP/Kingston-ValueRAM-8gb-1600MHz-DDR3-CL11-portable...

  This will be compatible with my laptop?

  Thank you

  Hello

  Have you tried an essential tool? It supports only 8GB maximum which means 4 GB x 2. The Kington 8 GB will not work. You can also buy

  https://www.Amazon.com/599092-001-Hewlett-Packard-1333mhz-Pc3-10600-SODIMM/DP/B00DUGHZ3G

  Kind regards.

• Upgrade Acer E1-531 RAM 1333 mhz to 1600 mhz RAM?

  As E1 - 531 supports DDR3 1333 mhz sodimm 1.5V, it is possible to be upgraded with DD3 1600 mhz sticks?

  I use 2x2gb DDR3 1333 mhz

  I want to replace 1x2GB DD3 1333 mhz with DD3 1600 mhz 1x4Go

  So the end result will be 1x4Go DD3 1600 mhz + 1x2Go DD3 1333 mhz = 6 GB of RAM with different types of sticks.

  Is it OK, it is compatible and is it works without problem later?

  Thank you

  Hello

  You can upgrade 2 + 4Gb without any problem, but it depends on the brand and the part number of the memory modules. They will work at 1333 MHz.

  1. What are the brands and the references of original strips?
  2. Same question about the other party?

• Satellite A100-847 does support 667 MHz RAM

  The A100-PSAA9 (A100-847) supports the 667 MHz RAM? The FSB is 667 MHz, but the laptop comes with 533 MHz RAM and everywhere that I looked for upgrades of RAM I've seen 533 MHz for this model.

  memory Finder: http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=25716&ft=m&st=3

  Hello

  It should be able to use the Ram 667 MHz module, but the difference between the 533 MHz and 667 MHz is not noticeable.
  I think the 533 MHz module is great and you are on the good side, if you use the modules to recommend Toshiba.

• Satellite P755-12F - Mhz RAM support

  Hello

  I want to upgrade the RAM on this laptop - Toshiba Satellite P755-12F.
  I'm looking for 2 x 4 GB Corsair 1600 Mhz Kingston and 1866 Mhz.
  Can anyone tell me for sure if the laptop supports 1866 Mhz or at least 1600 Mhz RAM?

  Thanks in advance

  If you want to upgrade RAM don't search for RAM Mhz support but to the compatible RAM modules.

  According to Toshiba compatible modules are:
  2 GB DDR3-1333-PA3918U-1M2G
  4 GB DDR3-1333-PA3918U-1M4G

• HP 15-r036tu - is the 1600 Mhz DDR3 RAM compatibility

  I have a HP 15-r036tu - I just want to know if 1600 Mhz DDR3 RAM is compatible with your laptop.

  The laptop has 1 single slot memory.

  When I run utility CPU - Z, it shows that the existing memory is of type PC-12800.

  Can I upgrade it to 4 GB to 8 GB (16000 Mhz)? or I have to buy 1333 Mhz RAM.

  Hello

  The following link shows the specifications of your computer:

  http://support.HP.com/au-en/document/c04319064

  It uses 2.58 GHz Intel Pentium N3530 with Intel HD graphics card which is a trail Bay processor therfore all you have a mchine chich 1 location: DDR3 1333 MHz Dual Channel Support (DDR3L-1600 demoted to the)(Bay Trail processors) DDR3-1333

  You can use 1600 MHz RAM, but it will be automatically upgraded to 1333 MHz.

  Kind regards.

• HP Pavilion dm1-4011tu Enterta: RAM 1600 MHz or 1333 MHz

  Nice day!

  I have a quick question that needs an answer Yes or no,

  Here it goes, I use a RAM at 1600 MHz for this laptop? (Yes or no) If not, why?

  Here are the specifications that the laptop has easier thoughts

  HP Pavilion dm1-4011tu Entertainment Notebook PC

  Model: A3U90PA

  : Processor Intel (R) Core (TM) i3 - 2376 M @ 1.40 GHz 1.40 GHz

  Installed RAM: 2.00 GB (Hynix DDR3 1333 MHz)

  

  Thank you very much

  Aironn

  Hello

  Looks like you should use 1333 MHz RAM. Machine can accept 1600 MHz RAM, but it goes off at 1333 MHz. And its FULL features:

  http://support.HP.com/us-en/document/c03061178

  Kind regards.

• HP N233SL: RAM 1600 MHz instead of 800 MHz on a laptop does not work?

  Hello world

  I have a HP N233-SL, and the max ram I can install is 8 GB. By default, I got 6 GB.

  I checked and it is now 1x4Go + 1x2Go. I wanted to buy a new 1x4Go to add, having finally 2 x 4 GB.

  Problem is that the ram installed now is a PC3-12800 DDR3 (800 MHz), and I can't find any ram to buy it is 800 MHz.

  Now all I have fnd is 1600 MHz. What happens if I install a 1600 MHz instead of the 800? And strives to have a work at 800 and a second to 1600 (which implies that the system will go back to 800) of RAM?

  Thx a lot

  Luca

  Hello

  DDR3 PC3-12800 1600 MHz is expected. I don't know why they put 800 MHz but double channel od mid-range configuration still valid. Double means two and each channel run 800 MHz or 1600 MHz RAM specifications.

  No, the system will not retrograde, it will run each channel 800 MHz in dual mode.

  Kind regards.

• I have a Macbook Pro mid 2012 edition, i7 and 8 GB (2 x 4 GB) of RAM DDR3 (1600 MHz). Can I add any RAM with this config?

  I want to upgrade my RAM 16 GB (2x8GB) and also to change the hard drive (750 GB) to a 250 GB SSD. I was going through the forum and people have posted that they have improved their RAM with no problems. I visited the local electronics market and is the knowledge that they have a Kingston 8 GB DDR3 1600 MHz RAM. I just want to know if it is safe to add that RAM for my MBP or not? One of my friends told me that the MBP requires a different sort of RAM so I am confused. In addition, I was intending to buy a single 8 GB and set up my MBP with 12 GB (8 + 4) RAM and then replace the other 4 GB with an 8 GB to make eventually 16GB. Will there be a problem with this approach? Also can I add any SSD fits laptops from my system? I found an SSD 240 GB (uv300) Kingston. Please suggest if I can add that.

  You can fit a maximum of 16 GB, if you choose compatible Ram.

• Satellite P200D-12f - can I use the 800 Mhz RAM memory modules?

  Hello!

  I have a satellite p200d-12f pspbqe model laptop.
  It has RAM 2 x 1 gb 667 mhz in it.
  So the qustion is: can I put 800 mhz RAM in my laptop? My motherboard supports 800 mhz ram?

  Thank you!

  GLIST

  Hi mate

  The speed of RAM depends on the chipset FSB!
  If the chipset would support 800 Mhz module RAM would you also with 800 Mhz.

  But if the chipset does not support FSB 800 Mhz then you RAM modules would be locked at the speed that is supported by FSB

  So you can use 800 Mhz but this makes no sense if the FSB is slower.

  You check the chipset properties!

• Compaq Presario CQ60-220US - 800 MHz RAM?

  Hey guys, quick question. I know the CQ60-220US comes with 2 GB 667 MHz RAM 5 CASE, I'm looking to upgrade & I was wondering if it will support 800 MHz RAM 5 CASES.

  Thank you!

  Hello

  Yes, it should support the memory at 800 MHz, but it will operate at the speed of 667 MHz because it is the speed of the FSB of the processor you have.

  Use the selection tool memory from Crucial.com to find the memory you need.  You can use the menu drop-down or the automatic scanner.

  http://www.crucial.com/

  Paul

• EliteBook 8440p; DM1-3020us: 2x4gb 1600 MHz DDR3L works in Pavilion DM1 but not Elitebook 8440p? But both are supported than 1066 MHz RAM

  I have two Elitebook 8440p PCs that both run an Intel i5 520 m (although one of them has a discreet Nvidia NVS 3100 m, while the other does not and use the integrated graphics card Intel).

  I also have a Pavilion DM1-3020us with an AMD E-350 APU; It's the only other PC I own which takes SO-DIMM DDR3 modules.

  I just bought this Crucial DDR3L 1600 MHz 2x4gb hoping to use it with the 8440p without the graphics from Nvidia:

  http://www.BestBuy.com/site/crucial-2-Pack-4GB-1-6GHz-PC3-12800-DDR3L-so-DIMM-Unbuffered-non-ECC-lap...

  However, it causes crashes and BSOD as soon as he tried to start under Win7 64 bit on both 8440 p PCs.  Also when trying to boot Linux Mint 18 I empty a kernel panic, and run Memtest86 + just leads to restarting the PC within seconds.  Yet, I can navigate through the BIOS throughout the day and it will continue to work very well...

  But here's where it gets really weird - the RAM works perfectly fine in my laptop DM1 Memtest86 + and Win7 64 bit (I use it as I type this).  What's curious?  Because both the AMD E-350 and the Intel i5 520 m only support up to 1066 MHz RAM!

  The only thing I can think is that there is something wacky where RAM is unable to operate at 1066 MHz at 1.5V or is not able to run at 1.5V to all E-350 1.35v support (and 1.5V RAM so that the i5 520 m only supports 1.5V) which itself would be really strange that Micron (which actually manufactured the RAM) States on their website that their 1.35v and 1.5V RAM have actually the same die (a bit like mobile i7s quad vs quad I5S Office) and that both can operate at 1, 5V, implying therefore that the 1.35v product is simply a higher binning:

  https://www.micron.com/~/Media/documents/products/technical-note/DRAM/tn4114_ddr3_1_35v_1_5v_compat...

  Crucial live chat support, however, closed several hours for the day, so I thought I would at least make this post in the meantime.

  Hello:

  Please see this thread, and the discussion that I posted in this thread... and you'll have your answer.

  6550 b has the same chipset as the 8440p.  I posted the link to the site from NewEgg for the memory, you need to buy if you live in the USA/Canada in the discussion that I've referenced to the other person who had the 8440p.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/RAM-memory-modules-that-actually-work-for-HP-EliteBook-8440p/m-p/5570634#M335108

  There are several discussions on this issue if you want to find even more.  Everything is solved by specific G.Skill memory I posted.

  The extent of why it works in the dm1 and not the 8440p, the chipsets are different.  The Intel chipset in the 8440p doesn't support voltage DDR3L.  Comparison of AMD and Intel chipsets are like comparing apples and oranges.

  I also believe that the chipset amd in the dm1 is more recent than the chipset in the 8440p and promotes low-voltage memory.

  I have just return from memory and use the gift card on something else.

  I doubt that Best Buy has this specific memory.

• Update of HP ENVY Sleekbook 4 - 1047tx of ram 1600 MHz DDR3 at 1333 MHz

  Nice day!

  I have a HP ENVY Sleekbook 4-1047tx (click for form) and I want to upgrade the RAM 8 GB, as you can see current memory is 4 GB of DDR3 memory at 1600 MHz... Can I use 4 GB DD3 1333 MHz on it? Is it safe? What could be the long term effect?

  franzkie93 wrote:

  Nice day!

  I have a HP ENVY Sleekbook 4-1047tx (click for form) and I want to upgrade the RAM 8 GB, as you can see current memory is 4 GB of DDR3 memory at 1600 MHz... Can I use 4 GB DD3 1333 MHz on it? Is it safe? What could be the long term effect?

  As a general rule, long term, its not recommended to mix different frequencies & CASE, RAM together.

  But if you ask if they work together at all, they will all be two race to lower speed - no problem whatsoever in this area.

  Fortunately, your system manual lists the frequencies 1600 times & 1333 & if you put two Rams they will work in single channel type - no dual channel supports listed in the guide.  Here is your Manual (Page 1).

  The performance issue that could have landed because they are different, it's that they are running in single channel which is slower mode. But your system do not already support channel.

  So all of your ram is now 1333 but it will work very well in single channel mode.

  Download CPU - Z to see what makes your ram and ram it is. The part listed for 4 GB of RAM is in your manual.

• RAM 16 GB 1600 Mhz computer laptop dv7 envy

  I got HP laptop dv7 7250us feel like I just want to know that if I buy corsair 8 gb x 2 vengeance ddr3 1600 mhz cl10 = 16 GB VAN I INSTALL MY LAPTOP ITS WORKING OR NOT
  Thank you

  Throughout the.

  Memory Two customer accessible/upgradable memory

  module housing

  Supported dual channel DDR3 - 1600 MHz

  Supports up to 16384 MB of system RAM

  Supports the following RAM system

  configurations:

  ● 16384 MB (8192 MB × 2; not supported

  on computer models equipped with a 32-

  bits of the operating system)

  ● 12288 MB (8192 MB × 1 + 4096 MB × 1;

  not supported on computer models

  equipped with 32-bit operating system)

  ● 8192 MB (8192 MB 1 or 4096 MB × 2;

  not supported on computer models

  equipped with 32-bit operating system)

  ● 6144 MB (4096 MB × 1 + 2048 MB × 1;

  not supported on computer models

  equipped with 32-bit operating system)

  ● 4096 MB (4096 MB × 1 or 2048 MB × 2)

  ● 2048 MB (2048 MB × 1)

  Your manual here.

  http://h10032.www1.HP.com/CTG/manual/c03591253.PDF

  REO