Is "Introduction to data acquisition" by R. King a good reference for learning programming of data acquisition?

Similar Questions

• Example of reference for PCIe Data Streaming double 6537 s disc

  Hello world

  I have successfully changed the example of reference for streaming ( http://zone.ni.com/devzone/cda/epd/p/id/5315 ) for the card PCIe-6537 UNIQUE and able to write to the clock speed of 20 M (at end of initial test) without any error.

  However, I don't know how to view the *.bin file to check whether I wrote the right data. I saw an example VI called 'read the binary '. However, it is said "File already open" and gives a GPIB controller error (very odd). Should I try using MatLab? I doubt that this will help because it seems that the file write VI does not close the file correctly.

  I have attached the updated UNIQUE PCIe-6537 source code and the file with this post error. There are file support as well for writing file window live

  I'm the kind of new acquisition continuously and at high speed. Please let me know if I'm missing something. Thanks in advance.

  See you soon,.

  YK

  I have a few links you can go to more resources continuous here and here.

  The original question, you have posted using binary VI reading won't be able to because of the memory.  You can read more small segments of the file and keep the file intact.  There are a number entry that indicates the number of data items are returned by the function.  If you want to save multiple files, you can use any looping function to make it work, just set the condition to find out how much time and when to stop.  I don't know of a quick example that does this.  You read again all the data, but given that the readings are in small pieces, it will help the issue given that the data are not need a large space contiguous memory to reside in during playback.

  Data compression would be more than a post processing step rather than a step continuously, and it can slow down your stream if you were writing at the same time after your reading.  In producer/consumer architecture, you could read in the data and compress it before the record in a file, which would not affect the performance of your reading, it forms the data and create a file that is smaller and takes less space in memory.

• Impossible to download World of Warcraft, receive the error message "DEP (Data Execution Prevention) should be enabled for this program.

  original title: need help, DEP is upward :(

  Here's the deal, im trying to download World of Warcraft. DEP (Data Execution Prevention) don't. When im trying to change it and add it to the list "settings for DEP" it won't let add me. DEP (Data Execution Prevention) should be enabled for this program. You can not disable DEP (Data Execution Prevention) for this program. -so here's the question, what can I do to fix this? I rebooted my pc as an hour ago, b4, I did I actually got the game installed. Is there a way for me to squeeze the game spent DEP (Data Execution Prevention)? Please help me with this. Thank you. -Mikkel.

  Hello

  EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
  http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspx

  The problem might actually be an addon or another program causing the problem and you
  must verify that 1.

  What antivirus/antispyware/security products do you have on the machine? Be one you have
  EVER had on this machine, including those you have uninstalled (they leave leftovers behind which)
  may cause strange problems).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  not better?

  Close IE and try again IE or IE with no Addons

  IE - tools - manage Addons (for sure disable SSV2 if she's here, is no longer necessary, but)
  Java always install it and it causes problems - you never update Java to go back in and turn it off again.)
  Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look
  right. Allowed are usually OK and "unauthorized" are not always bad. If a doubt
  program to ask about it here.

  Could be a free - BHOremover - BHO - standalone program, needs no installation, download and
  run - not all are bad but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs (Vista)
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and which would be
  stands with Prevx running except for a cookie of occasional low level (not a big deal), the update
  and then execute it as a scanner.

  http://www.Malwarebytes.org/

  I would add prevx so.

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  -------------------------------------------------------------------

  Do yourself a big favor and work through 1 above.

  Data execution prevention Internet Explorer Windows 7 included - several difficulty methods here
  http://HubPages.com/hub/data-execution-prevention-Internet-Explorer

  Feature Data Execution Prevention, or DEP in Windows Vista & Windows 7 - see also the links to the
  at the bottom of this page.
  http://www.WinVistaClub.com/F33.html

  How control DEP but I don't recommend turning it off and certainly not to let power off.

  How to enable DEP on or off for a program of Vista (and Windows 7)
  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  How to enable or disable DEP in Vista (and Windows 7)
  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

  ====================================

  If nothing else works you can try this however I would use as a last resort.

  IE - Tools - Options - Advanced Options - Internet Security Section - clear the check box enable memory
  Protection to mitigate the attacks online - APPLY - OK close and restart IE

  I hope this helps.

• How can I re - attach the data files for the programs?

  Original title:

  reconnection of the files

  BONE had to be reinstalled.  All data is saved but lost programs.  Programs now reinstalled, but how can I re - attach the data files for the programs?

  Hello

  You copy the data on your computer (Documents, Photos, etc.) and file extensions should be automatically associated with programs they have written in.

  Otherwise:

  "Changing programs by default by using Set Program Access and defaults of the computer"

  http://Windows.Microsoft.com/en-us/Windows/set-program-access-computer-defaults#1TC=Windows-7

  "How to change file Associations in Windows 7 and Windows 8.

  http://www.7tutorials.com/how-associate-file-type-or-protocol-program

  See you soon.

• Cannot create disks C and D for the programs and data on HP Pavilion dv6-6c53cl with 1 TB HD

  Just bought new HP Pavilion dv6-6c53cl Entertainment Notebook - 1 TB HD (it's good).

  Bad news is that there are FOUR partitions (C, SYSTEM, RECOVERY, TOOLS HP) with the C-drive with 904 GB.   If I understand correctly, you cannot shrink C and create a 5th partition for data.  It seems that you cannot have more than four partitions...

  (quote from sevenforums.com: ' you already have 4 primary partitions - you can't have more. ") If you try to make another c: partition using disk management, you will turn your (entire) disk into a dynamic disk. You don't want to do that! »

  HP experts: Is it true? I can't shrink C and create a disk for data D?  Can I combine one or more of your three auxiliary drives (SYSTEM, RECOVERY, TOOLS HP) and a disk for data D?

  I've always heard that it was not a good idea to combine all, Windows programs, system etc all in the same giant partition with lots of photos, songs, financial data, Word files, etc etc.

  Please notify.

  I have a 1 TB hard drive and use the main C for all files. I use images software to make my own custom recovery solution, having 1 large partition makes it simpler. Custom recovery options

  However, your question is how to have another partition. Daniel made a Guide on everything this HERE

• I need to allow the data controllers audio multi media that I need to find out how to access services running on your computer, I need to allow for this program and also Windows media center point final

  I need to allow the data controllers audio multi media that I need to know how to get to ser

  I need services running on your computer allow this program and also Windows media center point final. OK here is the problem have no sound on my computer, it says drivers are not installed, it indicates one or more programs need to be activated. It is said window media center end point should be activated. It is said he can not activate because no driver I have download the drivers yesterday and he always says the same thing, I have problems in trying to solve this problem, but don't know how I need help ok it tells me that there is no driver for my multimedia audio controllers. I have download then and he says the same thing, he repeats to me also to activate the multimedia audio controllers, I need to know how to get to the program that has all the services of the computer, so I can allow these things that need to be activated I do not know how attend you this program thank you for your help.

  The following articles can help me.

  http://www.ehow.com/how_6533261_install-multimedia-audio-controller.html

  http://www.TomsHardware.com/Forum/57964-3-enable-multimedia-audio-controller

• OWB book for beginner

  Hi OWB Expert,.
  OWB book that you think is a good reference for learning other than documentation.
  If I google I found this two books.
  
  Easy Oracle Warehouse Builder
  warehouse Oracle 11 g to start generator
  
  Which one you think is easier to follow, and what is the scope of the book.
  When I read the review, he said that OWB11g getting started is the only book of data warehouse based on OWB.
  
  I'm unable to find the Oracle Warehouse Builder easy synopsis
  
  Please advice
  
  Thank you
  Lie

  This is a good start

  http://www.Oracle.com/technology/OBE/Admin/owb10gr2_gs.htm

• T510 disabling client screensaver

  Hello

  I'm having a little problem, I have a T510 client that is supposed to display certain information, but without being interaction with users. However, it continues to go into screen saver mode. I tried to disable the screensaver via the Admin account, but it is not the effect it is connected on the user account. So it goes in screen saver after about 15 minutes.

  Is there a way to disable the screensaver for the user account?

  Thank you.

  Hello

  can you please indicate which operating system you use it the T510.

  The t510 may be provided with Smart/WES/ThinPro zero. Options depend on the operating system.

  A proposal, I think that you are talking about WES7.

  The screen saver is controlled by registry settings. You find many good references for the parameters of screensaver on the net, for example www.windows-commandline.com/disable-screensaver-registry-settings/

  While the parameter you need is "\Control Panel\Desktop\ScreenSaveActive", you need to change that to "User" account and not the administrator.

  Some steps below to change the settings for 'User' reg while signed in as 'administrator '.

  1: logon as administrator

  2: run Regedit

  3: put "HKEY_USERS" highlighted in the file menu, select Load registry. Point of "C:\users\user\ntuser.dat" give the key any name you like.

  4: Browse this registry hive newly added, find the key "\Control Panel\Desktop\ScreenSaveActive" and update the value as described above.

  5: select the name that you gave the new registry hive in step 3 and from the menu, select 'File' "Unload" click Yes to confirm the unloading.

  6: close regedit

  7: validate changes using the Green padlock next to the clock.

  8: let the workstation to restart and log in as user

  Concerning

  Andrew S.

• table name not valid error when inserting values into a table

  I use the following statement to insert values into a table:
  
  curs. Execute ("INSERT INTO _ * '%s' * _ VALUES ((SELECT MAX (REC_ID) + 1 OF GSAP_MSG_IN), (SELECT MAX (gsap_msg_id) + 1 OF GSAP_MSG_IN), 'SHELLSAP', sysdate, '%s', EMPTY_BLOB(), 1, SYSDATE, EMPTY_BLOB (), SYSDATE)" %(*table_name*,file_extension)) ")
  
  whence table_name the following statement
  
  table_name = ' config.staging_db_tablesNames ['in_msgs]
  
  as I created a configuration file for all parameters that can change. The value of the table in the audit using a print command is correctly, but when put in the query above to run the insert statement gives an error. The following is the summary of comprehensive performance where you can see the table name as
  
  $ python gsapscnr.py
  Vote for the data files in/home/mh/inbox /...
  
  GSAP_MSG_IN
  Traceback (most recent call changed):
  File "gsapscnr.py", line 147, in it?
  poll_for_data()
  File "gsapscnr.py", line 86, in poll_for_data
  Sorter = load_details_first)
  File "gsapscnr.py", line 42, survey
  curs. Execute ("INSERT INTO '%s' VALUES ((SELECT MAX (REC_ID) + 1 OF GSAP_MSG_IN), (SELECT MAX (gsap_msg_id) + 1 OF GSAP_MSG_IN), 'SHELLSAP', sysdate, '%s', EMPTY_BLOB(), 1, SYSDATE, EMPTY_BLOB (), SYSDATE)" %(table_name,file_extension)) ")
  cx_Oracle.DatabaseError: ORA-00903: invalid table name
  
  Can anyone help with this problem please. I'm passing the value of the table in a bad way. Also if anyone can suggest a good tutorial for paythong programming using cx_Oracle.
  
  Concerning

  Print the SQL string that you establish, cut and paste it this output in SQL * more and see if it runs. This may show you that you should remove the single quotes around the name of the table %s in the Python file.

• I can't understand the reasoning behind the tables to ID CS5. Can you help me?

  I can make tables ID CS5 works, but I do not understand how they work. I should mention that I am a heavy user of FrameMaker, so I'm sure I have some faulty assumptions.

  In FrameMaker, I'm used to the use of the table styles to automate the formatting of the table. All the table set in the form of information - for example, styles of text for titles table, headers, and body; rules; intercellular. etc. - is built in the style of table and applied with a single click. The text style information drawn from pre-existing paragraph styles that are associated with the table style. All very simple. But in InDesign, things seem much more complicated.

  InDesign a of table and Cell Styles. I'm not clear on the relationship between the two. You can specify to power and styles of shading in both. I don't understand this.

  I got more predictable results, with cell Styles, so I took most of my formatting information. But Cell Styles are not autonomous entities. Even if you create them, then add them to the Style Table, they must be associated with a pre-existing paragraph style. This looks like a duplication of efforts - two distinct styles (cell and paragraph) apply the same text formatting information. The cell Style includes power and info of the shading, but that shouldn't be necessary since that information can theoretically be entered in the Style of the Table.

  In addition, Cell Styles using limits you to the style of a paragraph per cell. In some cases, I need two - data or text, followed by a few chips. When this happens, that I had to remove the cell Style and directly apply a paragraph style. Looks funky.

  I don't want to get too deep into the weeds with specific puzzles I encountered; It is sufficient to say that I do not understand how the table and Cell Styles interact and how best to use them to create and format tables efficiently. Does anyone of you understand the reasoning behind the ID tables? Can you provide a source that explains it? There must be a system, a set of operating principles that are consistent, but I was not able to discern them.

  Sincere thanks,

  -Donna Reynolds

  Hi, Donna.

  I don't know a good reference for how table styles fit together, but I think that your problems would be solved more easily if you gave a specific example of what was confusing you.

  It is true that there is overlap between the table and cell styles. This is because they are modeled on the Table Options and Options of the cell, and there is an overlap. For example, the shot of the table and the outer race of the external cells are the same things.

  Most of the time, you can avoid this confusion - in the Style of your Table, do not define anything except for where you need to replace your cell style information, such as the outside of the table. You cannot set the padding on a style to a table in the table, because you cannot set the padding in the Table Options. Except for the stuff that relates to the entire table, such as the alternation of the contours of row/column.

  So set your fillings in cell styles and use this style in the Style of the Table.

  In your cell styles, do not specify a paragraph style. Use (ignore). It is important that a cell should dictate a particular paragraph style, then use it. But it's probably him better not reach otherwise.

  Is it that help at all?

• Load value one by one from xml as3

  Hi all

  I want to load value of xml.item.slika and use it to generate the link to the image

  XML file:

  <gallery>
      <item>
          <id>1</id>
          <strana>0</strana>
          <naslov>Lokacije</naslov>
          <aktuelno>1</aktuelno>
          <slika>1.jpg</slika>
      </item>
      <item>
          <id>2</id>
          <strana>2</strana>
          <naslov>Coaching</naslov>
          <aktuelno>1</aktuelno>
          <slika>2.jpg</slika>
      </item>
      <item>
          <id>3</id>
          <strana>0</strana>
          <naslov><![CDATA[O.Å . Bratstvo - panel]]></naslov>
          <aktuelno>0</aktuelno>
          <slika>3.jpg</slika>
      </item>  
  </gallery>
  
  Function:
  

  function ucitaneSlike(evt: Event): void {}
  var xml = new XML (evt.target.data);
  var slika:String = ";
  var loader: URLLoader = new URLLoader();
  for each (var xml... {point)
  Slika += item.slika;
  Loader.Load (new URLRequest (domen + ' podaci/igraci/slike/'+listaPodataka.lista.selectedItem["RB"]+ ' /' + slika + "?" + new Date () .getTime ()));

  centralniText.htmlText = ' < a href = "javascript:popUp(\''_+_domen_+'podaci/igraci/slike/'+listaPodataka.lista.selectedItem["RB"]+_'/'_+_slika_+_'\')" > < img src = "'+ domen +'podaci/igraci/slike/'+listaPodataka.lista.selectedItem["RB"]+" / "" + slika + ' "height ="50"width ="50"> < / has > ';"

  vScrollBar.update ();
  }

  
  }

  I get the result:

  localhost/podaci/igraci/slike/1/1.JPG2.JPG3.jpg

  Oh, if you want your textfield to display all links, use:

  kglad wrote:

  Use the following to get the good reference for each item slika.  If the rest of these urls are correct or not, I don't check:

  function ucitaneSlike(evt: Event): void {}
  var xml = new XML (evt.target.data);
  var slika:String = ";

   centralniText.htmlText = "";
  

  var loader: URLLoader = new URLLoader();
  for each (var xml... {point)
  Slika = item.slika;

  Loader.Load (new URLRequest (domen + ' podaci/igraci/slike/'+listaPodataka.lista.selectedItem["RB"]+ ' /' + slika + "?" + new Date () .getTime ()));

  centralniText.htmlText += '
  ';

  vScrollBar.update ();
  }

  }

• Oscilloscope for the acquisition of data from the usb-6009 or - example of temporal division for 5 seconds, 10 seconds

  Hey Hey everyone

  I was looking for an example for two-channel oscilloscope virtual using e/s all-in-one of the 14 bits of NI DAQ USB 6009. I tried to research for example BOF time division or s/div for 1 second, 5 seconds, 10 seconds.  but was shocked to find that there is no reference for it. The range of oscilloscoper virtual

  Minimum - 10 micro s / div maximum -10milli second div but there is no example for 1 second / div or 5 seconds / div...  If anyone can guide me. I'm new to labview environment.

  This is the oscilloscope two sample obtained from google search. is there material limitations. ?

  I'm working on continuous 4-channel data acquisition data acquisition using niusb 6009

  The sampling frequency is sufficient for any desired s/div. The sample rate is 12 ksamples / s per channel, so if that meets the Nyquist criteria for the input signal, you can capture it. The number of samples has no effect on that with the exception of the amount of the signal you acquire. Your chart is not stable, if you do not trigger the acquisition. Even as real significance, therefore your emulation seems actually successful.

• Sample clock dependence with small signals data acquisition

  Hi all

  I use a NOR-9205 on a NOR-cDAQ-9184 and noticing some interesting dependencies of waveform on my sampling rate selected. It seems that small changes in the sample clock frequency have a significant impact on the measured waveform.

  Quick background, I am in a position a signal with a ripple of mV ~ 10 with V 1.6 bias. I'm not interested in DC, only the AC signal but the NOR-9205 has only DC coupling. The application is a circuit where I expect simulations noise past the circuit must be greater than the higher noise frequencies. In the waveforms attached the background plot is the applied signal, and the top graph is the signal arising after that the signal was mostly annihilated. The two waveforms are measured with the NOR-9205.

  I am aware that this measure is less than the precision of the NOR-9205, which has a maximum precision of ~ 3 mV in his +/-5V range. However, if I can't at least on the basis of shape which is good enough for me. I'm also now pretty curious that data acquisition is actually to create this

  My best idea, is that it is a product of internal multiplexing of the 9205 with the DAC.

  The first plot shows the waveform at 20 000 Hz, which is what I expected:

  

  The second shows the waveform at 20 001 Hz, which seems to be modulated with a backup sawtooth:

  

  The waveform looks as expected for 20 000, 20003, 20004, 20005, 20008, 20009, 20010 and Hz 20011. The waveform looks like modulated to 20001, 20002, 20006 and Hz 20007.

  Ideally, I would like to understand this problem so that I can configure the measure in a stable way that I can count on the basic shape of the wave. Has anyone seen something similar?

  
  

• Sampling frequency for the output of an acquisition of data USB-6211 card?

  Hello-

  I use a CGI CMOS FireWire camera to read an interference figure, then using a transformed of Fourier transform spectral interferometery (FTSI) phase recovery simple algorithm to detect the relative phase between the successive shots.  My camera has a linear 28 kHz scan rate, and I programmed my phase retrieval algorithm take ms ~0.7 (of a trigger of camera at the exit of the phase). I use the live signal to control a piezoelectric stack, by sending a voltage single sample to the analog output of a data USB-6211 acquisition card.

  Send this output voltage increases the time of my loop 4 m, I would really like to achieve a 1 kHz or better sampling rate. Is the problem with my DAQ card or with the processor in my computer? The DAQ cards of NOR can support these speeds?

  Thank you

  -Mike Chini

  Hey Mike,

  With USB, your loop rate will be around or under 1 kHz, even on the best of the systems. USB has a higher latency and less determism PCI and PCIe. You can get rates AO one much better sample on a PCI card, potentially a PCI-6221. We have a few HAVE points of reference for targets of RT for PCI, / AO in a loop, you should be able to get similar performance in Windows, but if you do a lot other treatments may suffer from your local loop rates.

  Hope this helps,

  Andrew S

• acquisition of data with different sampling rates high

  I have a few questions on the use of the OMB-DAQ-3005 with different sampling rates high.

  For our application, we have 8 analog inputs. Which two are a quick response and should be sampled frequently.  We have an encoder quadrature (CPR 1000 running at 1800 rpm).  We plan to sample X 4 encoder.  For the analog inputs for the quick response, we want to trigger a sample of each pulse or each a few pulses, thus creating a timestamp with the position of the encoder with respect to position index as well as two fast analog inputs.  We have data correlating the analog inputs with the position of the encoder.   Other analog inputs, we want to measure relatively slowly (for example once every 5 dry or similar).

  How can I go on the configuration of the two (or more) sampling rates different wherein I can taste entered at different frequencies?  Also, is there a way to reset the encoder count after outbreak of the index as I have the position of the encoder with respect to the index?

  Maybe you'll find someone here who uses the OMB-DAQ-3005, but this forum is really more designed for LabVIEW programming issues.

  I've never used the OMB-DAQ-3005, but out of curiosity, I took a glance at the Manual of OMB-DAQ-3005.  The answer to both your questions are:

  1. you cannot run a hardware DQA Multiplex (like this one) at independent rates by channel.

  2. the OMB-DAQ-3005 supports an Index Z feature to reset the counter - look for documentation on how to configure any software interface you are using.  If you get stuck, you can try to discover media appropriate for instrument channel.

  Best regards