my computer will do is no longer a system restore

Similar Questions

• Virus will not let run me the system restore, and I can't understand how to run a system recovery because there is no return upwards for this computer. It's a basic vista.

  When the computer starts, it must choose to leave a program unknown to the system access everything else it shows is a black screen. When you click on allow, he pulls up a virus scanner that says he has all sorts of viruses, but the program is the virus itself, because this virus program is not really on the computer. When you try to run the system restore, it says that this option has been disabled by the administrator. Also, I can't find how to run a recovery of the system and start the computer to its original settings. Help, please. It's not my laptop which is having this problem, but my roommates computer. Thank you for your time, I've ran out of ideas and was seriously in need of a little help. I tried to repair the system running through prerssing F8 in the boot menu and has not worked. also try the system restore via the SafeMode command prompt does not work either.

  Download Malwarebytes' Anti-malware using another machine. Install it in the
  your roommate infected computer in safe mode and run. Accept all default settings.
  Don't forget to do a backup when offered. I hope you find and
  eliminate the infection.
   
  "crashbbandicoot" wrote in message
  News: 351ebb9b-60aa-47 d 2-9b 13 - e309f4ee035b...
  > When the computer starts, it must choose to leave a program unknown
  > access the system all that it shows is a black screen. When
  > you click on allow, he pulls up a virus scanner that says that there are all kinds of
  > but the virus program is the virus itself, because this virus program is
  > not really on the computer. When you try to run the system restore it says this
  > option has been disabled by the administrator. Also, I can't find how to
  > system recovery and boot the computer back to its original settings.
  > Please help. It's not my laptop that is having this problem, but my
  > computer of roommates. Thank you for your time, I'm out of ideas and
  > seriously needed a little help. I tried already running
  > repair system through prerssing F8 in the boot menu and has no
  > work. also try the system restore via the SafeMode command prompt has no
  > not work.
  >
   
   

• Computer will recognize is no longer my external HARD drive

  Original title: device notrecognised

  I have a WD external hard drive. It was working properly until a few days, but now none of my computers recognize it. No message is displayed.

  When it is attached to the computer, it shows that the driver is installed and ready to use, but the device is not visible anywhere. I have a unable to locate in "My Computer".

  I have a lot of data stored in this and cannot do without them. Help

  Hello

   
   
  1 did you do changes on the computer before the show?
  2. which version of the operating system you are using on the computer?
  
  Method 1:
  

  You can check if it is detected in the managememnt disc.

  Method 2:
  You can check the Device Manager and see if the computer detects any error message.
  a. Click Start.
  b. management of devices of the type in the search box, and then open it.
  c. check that the device is listed there.
  d. right-click on the device, and then click Properties.
  e. under the general tab, check the status of the device.

• computer will not start up - have to keep restore to June 7

  When I went to my computer on Thursday, he had installed updates and turns off. When I tried to turn on everything I have has the windows logo and it stuck there for centuries. I turned off then when I turned on it again chose option to repair. She didn't so I restored to before last update (17th? (June). Still would not work so successful to restore to June 7, and it worked.

  The next day, the same thing happens again. Searched on the internet and discovered had to change the settings so that I have to choose updates to install.

  Because I could not use my pc decided to use the laptop - lo & here's exactly the same thing happened with it.

  Now, today, I see that in the menu start, there the! to say that it will install updates if I turn it off.

  How will I know which update caused the problem without going through one by one? Anyone had this happen?

  It's the history of the versions list:

  

  Any ideas please?

  Thank you

  Gerry,

  I downloaded it and it says install hotfix KB 947821... , progress bar is 1 cm from the end, been slain to who for 45 minutes... now is - this normal?

  the good news is that my PC seems to work fine now

  Anne

• Why can't start my computer in safe mode to do a system restore?

  When I try to go to eyetem restore in safe mode, it will not go. I think I get

  Registration errors can help with this problem?

  It is somewhat similar to the following Technet problem:

  "SP3 hangs at agpCPQ.sys during startup"
   
  who offers this article as a solution:

  "Problems when Windows XP tries to load the Agp440.sys service.
   < >http://support.Microsoft.com/kb/324764 >

  That may help your problem.
  HTH,
  JW

• Why my computer won't let me do a system restore?

  I am running Windows XP and I can't do a system restore?

  Troubleshooting in Windows XP system restore
  http://support.Microsoft.com/kb/302796

  Abnormal termination can affect the system restore
  http://support.Microsoft.com/kb/283096

• Microsoft Security Update 11/01/2012 installed including Service Pack 2 and now start the computer fails. No Windows security, no system restore.

  Can't start at a fixed point to the password screen. Goes to a blue screen and try to restart automatically.  When you run safe mode cannot use the system restore, have no security of windows, so does not automatically restart when the change is made impossible to read.  Norton 360 found two viruses at the origin and the fixed, no viruses detected in recent failure.

  Hello

  You can use the full version of Windows Vista installation disc and try to perform a restore of the system, the Windows recovery environment and check.

  For more information, you can consult the following article ot.

  What are the system recovery options in Windows Vista?

• System Restore will set a BAD_POOL_CALLER blue screen?

  If I do a "System Restore" to start the system and pressing Ctrl F11 to try to avoid a constant blue screen BAD_POOL_CALLER... what will solve the problem? The "System Restore" will erase all my files? I have a Dell Dimension E520 running Windows XP Media Edition

  If you use Ctrl F11, which calls for the restore by Symantec PC Dell and who could restore your system to the as shipped on the status of the plant and you would lose all your personal files:

  NOTICE: Using Dell PC Restore permanently deletes all data on the hard drive and removes applications or drivers installed after you received your computer. If possible, back up the data before using PC Restore. Use PC Restore only if system restore did resolve your operating system problem.

  A Windows XP System Restore does not know or care about your personal files and allegedly, leave them intact.

  You can read about the various dining options in the Dell E520 (page 53) user manual here:

  http://support.Dell.com/support/eDOCS/systems/dime520/en/OM_en/NH730A01.PDF

• Computer won't start; System Restore does nothing

  After downloading and installing Service Pack 2, I can't restart the system.

  Restart with the repair of the system has no effect - a few tracks.

  System Restore is also no help.

  Hello

  1. have you tried to start the computer in safe mode?

  2 have you tried to restore from the system recovery options?

  I suggest to start the computer in safe mode and check if you can start:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are not able to start the computer in safe mode, then do restore from the system recovery options and check if that helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  It will be useful.

  Start in safe mode did not help.  The computer wnt in a mode of repair without end, without any results.  I finally got a memory diagnostic option (F8 or F12 - can't remember which - of the splash screen) and ran it for the hell of it.   Somehow, when it is finished, the computer started upward.  I did a system restore and I thought that was OK.  Then I met several different errors and finally gave up. All the problems started with me trying to upgrade to Vista Service Pack 2.  The installation failed (twice).

  I've upgraded to Windows 7 (from Vista) and am happy so far.

  Thanks for the help.  Good to know he's experts there.

• System Restore will not restore the selected date, even if the date is in bold in the home

  It just says: cannot restore the selected date

  Usually, this is caused by your anti-virus program is interfering with the system restore.  Norton is especially guilty of this behavior.  Try restarting your computer in Mode without fail (repeatedly tap key the F8 key during the restart of the computer), and then perform your safe mode system restore.  When it restarts after you perform the restore, allow him to start in normal mode.

  HTH,
  JW

• 'System restore is not able to protect your computer'-'disc 2 device\deviceharddisk1\D, has a bad block.

  Original title: SYSTEM ERROR - error Code 0 x 70020, July 27, 2011

  I got an error Code 0 x 70020 and stopped and restarted the computer. but when I tried to use system restore, I get the message "system restore is not able to protect your computer". I am not a Curmudgeon, one got any ideas what the problem is and how I can get around it.

  I also watched the errors of advanced system information log which had a message dated April 24
  "Disc 2 device\deviceharddisk1\D, has a bad block.

  Not sure if this has any relevance?

  Hello

  · What is the service pack installed?

  · What is the number and the model of the computer?

  · Do you remember any changes made on the computer before the show?

  · You have security software installed?

  · You have a Windows XP Setup disk?

  Try the methods and check the results below:

  Method 1: Manually run the Chkdsk disk scanner. To do this, follow these steps:

  a. Click Start, click Run, type chkdsk /f /r and then click OK.

  b. at the command prompt, type Y to let the disc run when you restart the computer.

  c. restart the computer.

  d. Chkdsk runs.

  Method 2: Scan virus online and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

  You can also see: Troubleshooting for problems when you try to use the System Restore tool in Windows XP: http://support.microsoft.com/kb/302796

• I have a Dell computer with a Vista operating system. My dell dock will charge is no longer. Help?

  I have a Dell computer with a Vista operating system. My dell dock will charge is no longer. Help?

  I have a Dell computer with a Vista operating system. My dell dock will charge is no longer. Help?

  All download Dell Dock and see if that fixes the problems.

  http://DellDock.com/

• Windows Media Player will play is no longer my local computer .wmv videos.

  Windows Media Player will play is no longer my local computer .wmv videos. There is no error message. The circle just keeps going around and around and after as long as 9 minutes, the video still has not played.

  Windows Media Player will play is no longer my local computer .wmv videos. There is no error message. The circle just keeps going around and around and after as long as 9 minutes, the video still has not played.

  =================================
  If it is a recent issue... it may be worth trying to do
  a restore of the system at a time before everything started.

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Using Windows 7 or Vista System Restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows XP computer - my wife is no longer will start and load one of its programs.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone! My

  Ideas: Computer my wife is no longer boot up and load one of its programs.  When you turn it on, Windows XP loading blinks and then you get an error message that says: "you cannot use MSN to connect. Please choose another dial to open a windows session.  With this message, all you have is a 'OK' that affects when you click it, gives you your photo screen saver and nothing else, so you have no where to go.  A few days earlier, she had an alert to update update to windows 8, but she refused and it seems that since then, she has been the problem.  Can anyone help?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Refusing to install IE8 would cause problems, Indy. Try to post here for assistance instead: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• "The scan of the computer is enabled is no longer" false error

  Hello

  I bought and installed a HP DeskJet 3521. It is configured for wifi connectivity to two computers on our home network. A laptop computer is 8 64-bit Windows. The other is Windows 7 Pro 64 bit.

  The printer seems to work perfectly. However, the driver regularly (as in all the several minutes or so) pops up a message saying "the Scan of the computer is enabled is no longer" or something like that. It is apparent from the system tray. It fades after a few seconds. Otherwise the printer seems to work very well. This happens on two laptops.

  Laptops are in the same room as the printer and the router. The signal strength is high.

  Why did this message occurring and is there a solution for this?

  Thank you

  It is very probably the same problem I had with the HP printers for years.  It happens when the printer goes into a power saving sleep state and falls of connectivity.  To resolve the issue, you have to walk on the printer and the power of the cycle.  It has NOTHING to do with your router or static/dynamic IP allocation.  It's the fault of crappy entiely firmware and HP software.  HP 'experts' are playing the same game of blame-the-other-manufacturer or blame the old user that HP has always played.

  My current HP printer is the third HP sub-standard product I've owned... on three (Yes, I know, shame on me twice).  I've owned a high-end, expensive laptop which overheated during playback of a video to youtube and two printers which disengages automatically when they entered in the mode 'sleep'.  It will be the last HP product I already own...