Is it bad to shed light on my iMac?

Similar Questions

• My screen went black, I see the desktop on this subject when I shed light on the screen and it works plugged into a monitor, what should I do?

  Has been for a while, my screen went a day back in 2012 when I closed the lid and it took to the office, and when I opened it back up it did not work. Finally, I saw where he displayed but not lit, so I hooked up a display for her and that works. How can I fix this I do not know you need a light or perhaps something more simple, I hope. Suggestions please. I also have a problem with my mousepad being spread upward and is not quite work right.

  See: MacBook Pro 2011 for graphics problems repair Extension program.

• Shed light on the loading of the UDA

  Hello
  
  My dimension member accounts each have 3 UDA associated with them, and I'm trying to load the metadata in EPMA using flat files. I'm not clear on how to load the information of the UDA.
  
  I created a dimension of the UDA - UDA1 and try to associate with the dimension of accounts in the following way.
  
  ! Section = Dimensions
  ' Name. DimensionClass
  ACCOUNT | Account
  ALIAS | Alias
  UDA1 | UDA
  ! Article = DimensionAssociations
  ' BaseDimension | Property | TargetDimension
  ACCOUNT | Alias | ALIAS
  ACCOUNT | UDA | UDA1
  ! Hierarchies = ACCOUNT
  "Parent | Child | Alias = default | SourcePlanType | Plan1Aggregation | Dtx200 | SoldeTemps | SkipValue | VarianceReporting | TwoPassCalc | MemberFormula | UDA
  
  Since there are 3 UDA for each Member, I separated them with comma.
  
  This format is correct?
  
  
  I received the following error message for all columns starting with (SourcePlanType... UDA)
  Import Dimension ACCOUNT does not have a mapping for the property source (SourcePlanType... UDA). The data for this column will be ignored
  
  Please notify. Greatly appreciate your help

  This member exists in the dimension of the UDA? I think that the error is displayed for the dimension you are loading cannot find Member in the dimension of the UDA

• Light sensor ambient iMac 2012

  My iMac has clearly a sensor of ambient light as I can see the screen change when turning on/off the light.

  My question is about the 'normal' position of the brightness slider, because it seems that the brightness of the screen changes automatically relatively there where I put the cursor rather than an absolute position based on the ambient light.

  Is this behavior as expected?

  Thank you for your help

  Yes. It recalculates a value based on your preferences and available light.

• Overlay despite the bad light situation?

  Hey can guys, someone help me?

  I have a video with a bad situation of light that was unfortunately not been turned in a blue or green box. Don't you think that it is possible to use effects of overlay for the removal of the background? I need the person and the ball without the background.

  So far, I've tried all the effects of inlay sequelae but nothing really worked. Does anyone have a tip for me?

  Maybe I can change the color before entering? The problem is that the socks have the same color as the background.

  The result does not have to be perfect because it will be for an iphone app. But everything I've tried so far looks really bad

  

  Here's a quick test of 2 minutes to shoot a key of your always.  I left all settings visible effects if yo can see what I've done.

  On the bottom layer, I used a luminance key to extract the best I could from the background.  This left a lot of shadow on the ground still visible, so I used a mask to get rif of the lower segment of this layer.

  On the top layer, I used a color key linear to extract the best that I could.  That leaves a lot of rounded edges and holes, especially around the skin tones - so the two layers.

  There are still obvious holes in the ball reflections that would need to be filled.  It is far from a perfect result, but perhaps won't work if your scale is small enough for your final result.

  

• The title bar font is badly behaving output Responsive HTML5

  Please help - this problem is sapping precious hours and I can't find a solution. I created a new nice sensitive provision of HTML 5 in RoboHelp 11 - but the police of the title bar is not rendered such size stipulated in the editor.

  This seems to be the specific project that I can use the stock and other provisions to screen with the same result. I exported my sensitive custom layout in a new project, and it behaved as it should.

  

  The results generated, I get (see illustration) has a size of bad character in the title bar, the size of this font should be much larger. I checked by about each setting of the project, and I don't know why it does this.

  Do the same with the stock sensitive presentation of the screen:

  

  A person is able to shed light on this, your recommendations would be greatly appreciated.

  You have the "Scope of project styles limit" setting enabled in your SSL?

  My guess is that this setting is at the origin of the problem.

  Kind regards

  Willam

• Error... impression on my HPLaserJtP1102w. The wireless light flashes. Windows7 64 bit

  I have recently replaced my old laptop with a new, but has not had any problems.

  Check all cords. They are well connected. I have even reconnected them.

  New modem wireless recently - same type as before, but that was fine, too.

  Online at HP and has done a few things they recommended to do. No change.

  Re-installed and updated the drivers.

  I tried to clean heads but because of the error, it woudn't let me. I have not much used. Two or 3 cartridges, so shouldn't have a lot of ink, anyway, maybe?

  iklangois,

  This article should shed light on the problem you are experiencing. Check it out and let me know the results:
  http://goo.GL/hVgmt

  In addition, you can run the doctor print and scan located here:
  http://goo.GL/CJ0Ny

  Good luck!

• I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?

  I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?  I reinstalled LR but no change.  Anyone can shed light on this issue?

  Gary

  The only effective solution is to reset the file preferences... it has been damaged by trying to create a catalog with the invalid jpeg.

  The instructions to reset the catalog are here: given to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

  When you have done this, place you and double click on the correct catalog and LR should then start OK.

• Appropriate advice... .creating a rocket to a point of light.

  I create a "firefly" from a point of light.  (Shape layer).

  I would like to have an effect of flare radiating from the point of light.

  Everything will be animated and composed with live action.

  I hope for a glowing intensity which seems to shed light (on a face womans - I'll turn and aim more precisely)

  Appreciate any suggestions.

  Thank you.

  Craig

  I just reproduced the layers. More you duplicate and blur over the heart. It is a function of the ADD blending mode. He performs the best in 32-bit projects and more accurately simulates the way real light behaves.

  If you're on a mac, you should see the keystrokes. Replace Alt Option and Cmnd Ctrl for windows.

  Here's the project file.

• MacPro end of 2013

  Hello

  I use a MacPro specs are:

  Processor: 3.7 GHz Quad Intel Xeon E5 cord

  Memory: 12 GB 1866 MHz DDR3 ECC

  Chart: AMD over-pants D300 2048 MB

  OS X Version of Yosemite 10.10.5

  Monitors: Dell U2312HM screen 23 '' x 2

  251 GB of storage: free 57.5 GB Flash memory

  I worked on my work, and I must admit I'm not to save my work all the time and I thank God that have taken up some of the Adobe Applications. But almost every day my MacPro crashes / freezes.

  I mainly these open applications Spotify, Microsoft Outlook, Adobe Illustrator, Adobe Photoshop, Adode Indesign, Firefox and sometimes Adobe Acrobat. Mainly sound when I use Illustrator that goes up the spinning wheel, but my Spotifty is still to play the tracks but does not move the playback bar.

  I tried to click around the screen, clicking on the desktop and sometimes it works, but the spinning wheel is still there. I tried to force it to quit smoking, but most of the time it does not work, so I have to restart the MacPro using the power button.

  When it restarts any applications that I had opened back, some mode of recovery other not. Then my Wacom tablet is so slow he only works on a single screen and must use the mouse to go to the screen in system preferences to get the two screens for work or reboot the computer because my tablet is not recognize.

  I did a full cleaning and reinstall and it seemed to work at first, but now has slipped to his old ways. I thought it might be Adobe apps the cause because I used to get the error messages and is a journal of my crashes, but its getting boring. Also, I delete large files, junk files, empty the trash when it's possible. It seems that other colleagues do not go there as much as I do and we all use MacPro.

  Can someone shed light on this case I am confused because I have never been more troble with my previous G4?

  Thank you

  Alison

  The Mac maintains a record of all messages, good or bad, issued by the system. This journal is kept in power outages and reboots. It contains clues to why your Mac no longer responds. But it's a huge file and it is almost impossible to dig through without additional clues on where to look.

  Next time you have such a problem, not the exact time, hour, minute, second.

  After you restart your Mac, open Console.app (in the folder/Applications/Utilities). Huge scroll to the date and time of the problem. The next restart will begin with "BOOT_TIME", so the stuff right before that it's the key. Opening of the forum and start a response. Cut and paste a full screen of messages whose BOOT_TIME line, but nothing after.

  People who read this are all volunteers. More lines is usually just more difficult to navigate.

• IMac ongoing enforcement if slow takes like 5 min to open the page if it opens even, I don't know what or how to get rid of the things that is what actually happen how to clean what should be cleaned as all these extensions, please can someone explain ste

  I'm no computer expert and cannot afford to have my iMac cleaned. I don't know what to clean or how to do it.  I have extensions that I don't know which ones to delete, things like that, not sure what flash player I need or does come with your old iMac 2007?  I have Adobe who is good or bad but there are a few other does not say what I really should use.  I hate feeling so stupid and for the past 3 days, my computer works so slowly takes good 5 min to open a page opens it sometimes say oops error, waited for a long time, I even guess.  I don't know how to fix or what I should be getting rid of or keep.  I finally get rid of all the caches, just took a chance, still no improvement.  I have never on this point but can't afford to get whatever it is, I need to back up.  So please, can someone help to shed light on this point, what to delete it so my computer can run like he did?

  Thank you very much

  Sandie

  EITHER back up front what!

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• Qosmio X 500-fault of screen not covered by the warranty?

  So as said elsewhere the X 500 series has a certain design/manufacturing fault that allows a "shadow" be visible on the entire length of the screen at the height of the taskbar (so don't not visible in windows, but jobs is full screen, like movies, just terrible).

  The attitude of Toshiba is that it is a "limitation of the technology" and not covered by the warranty (which I think is very poor on their part).

  My query is why?

  Given their other 18.4 "models (P500 for example) doesn't seem to have this obvious anomaly, and nor other brands models 18". If it was a limitation of the technology like Toshiba said so surely other models/brands that X 500 would have this anomaly?

  Personally, I think the excuse of "limitation of technology" is just a COP on part Toshibas who do not want to solve the problem on EACH item, I'm sure that the next model (x 600? whatever) will miraculously not the issue and those of us who have decided on Toshiba will continue to say "too bad".

  I searched the net looking for x 500 no descriptions of this "limitation" as we should expect a "limitation of technology" to be as widely reported as their other favorite, the dead pixel but found nothing. It seems this limitation of effects incredibly alone technology Toshiba X 500? Toshiba must think we're gullible.

  My fault however maybe done research, can any that shed light on why only the X 500 has such a terrible mistake and no other models?

  I don't know if this is the right place for these issues.
  It is user forum and I do not think that any of us has access to s secrets Toshiba ;) to see what type of screens are used on the Qosmio X 500.

  I don't know if Qosmio x 500 has new generation screens, but I don't know that Toshiba uses better technology for this model of laptop high-end.
  In the past all Qosmio notebooks are best of the best in all aspects, materials, software and many other software programs.

  Just, I hope not, I am sure, that Toshiba will continue this philosophy for Qosmio range and seems best proof new Qosmio F60.
  I like it a lot but leys see how much it will cost.

  Good bye

• Power of the satellite S3000 - X 4 question.

  I got an S3000 - X 4 to look at, and I can't seem to find the problem. (I searched these Forums and Google before this announcement and can't seem to find a result)

  The Machine lights.

  I had the original power supply, Battery, DVD player and memory. If I hit the power button the camera seems to try to start up, the hum of hard drive noise, the led power and HD light turn green (alternating current is already on), happening for about 5 seconds, then it stops everything and let me just with the AC power light.

  I tried to use a different power supply with the same output (voltage and AMPS), and the same thing happens.

  I removed the battery, just on the AC and still the same thing. This too after the DVD-Rom has been removed, and even I remove the memory and he gave a wipe incase it was a bad connection.

  When the battery is connected, I get a flashing Orange (about 1 second for 4 seconds) I guess that's the charge of the battery? Although my Acer laptop, when he is in charge there is static, I don't know if Toshiba shows differently.

  If I just have the battery connected, and no current it won't start at all, so I think the battery is dead, and flashing errors say maybe the battery does not charge, but with him does not not on AC only, it's confusing me.

  The Toshiba worked well at a time, then the next day, they went to turn it on, and it would be not just turn it on. I thought that it could hiberated, but I can't find a button that he brings back from hibernation. (If that is the question)

  Can anyone shed light on this problem, because I want to help my friend before there to make any money on repairs. (Willing repaired at all, after all the prices for laptops are so cheap now, it might be worth buying a new one)

  Kind regards.

  Hi Paul,.

  from your description of the symptoms, I suspect a faulty motherboard. As you say rightly, the laptop must turn on without the battery in place, so I think that can be eliminated as a possible cause.

  Having removed / clean the modules of RAM as well as the optical drive only hard disc and even if it didn't it should still turn on the laptop.

  Kind regards

• Failure SMART hard disk with Satellite M30X

  A problem with my hard drive has suddenly popped up. Whenever I try to start the computer, the following message appears:
  SMART failure provided on hard disk 0: toshiba mk6025GAS-(PM) WARNING: immediately back up your data and replace your hard drive. A failure may be imminent, press f1 to continue...

  When I press f1 it just shows the window of windows xp with a black background and stays like that.

  So, today, that I inserted dvd products recovery, which took about 3 hours to restart. Once this is done, I could go to the windows menu start and tried checking errors c drive of my computer. To be able to do that I had to reboot the computer.

  When the computer has restarted the same error message above SMART failure predicted etc. had sprung up again. After pressing f1 computer started chkdsk. When he reached 4/5 which was chkdsk varifying data file he said a cluster of file message replaced 5518 name pagerfile/sys and just froze.

  I manually restarted the computer and when I went at the start menu windows an other error message pops up saying: windows could not save the data for the file c:\ data has been lost. This error may be due to your computer hardware or network connection. Please try to save this file elsewhere.

  Finally I tried to restart the computer once more and a blue screen dark this time appeared saying something in the sense of: it has detected a problem with your hard drive and it may have been caused in what concerns some hardware and something in the message was referring to the BIOS.

  I buy a new battery for laptop a couple of weeks, but it worked perfectly. So someone could shed light on, you can the problem. At the time the laptop is freezing on the black windows xp screen.

  Thank you

  For me, it looks like a HARD drive failure.

  The S.M.A.R.T (self-monitoring, Analysis and Reporting Technology) is an industry standard that is used in hard drives. This feature watches and monitors the important parameters of the HARD disk and allows you to recognize the HARD drive problems.

  In my opinion the HDD doesn't work properly and you must replace it as far as possible.

  Sorry for this bad news but I think that there is no other solution as a replacement of HARD drive

  Bye and greetings

• ALL my mail suddenly disappeared - everything! Malware?

  A few days ago, I migrated all of my information from my older iMac who used the Snow Leopard operating system to my 'new' (actually bought second hand just before Christmas with guarantee of six months left and reset to factory settings) six months using BONE from Yosemite's old iMac. I think it's a total nightmare!

  And the last problem is that ALL my mail disappeared completely. He had been there for a few days already, moved well, apparently and receive the mail with happiness. Then - all parties! Just completely empty for all the mailboxes in the right hand of the screen message box, while the sidebar with the mailbox is still there and the number of unread messages in each box.

  Just before this happened that a pop window appeared saying mail wanted my admin password. This very annoying pop up always came up with horrible frequency during a long time ago, constantly asking admin password or password e-mail account until I could collect the mail. It would also be an interrupt constantly, even when I'm not dealing with mail, but do something completely different on the computer.

  It seemed to be a terrible problem I thought maybe something to do with BT because BT provide my internet connection and caused all sorts of problems before with their 'technical help' people in India, is a complete joke and behave as malicious Cowboys and never, ever, be able to help with anything at all.

  They demanded also that I realize sharing screen is totally unjustified and it may be that they inserted malware that my old mac began to behave badly, in addition to heating and slow down to a standstill. But all BT stuff was quite a long time ago & I was using mail on my old computer so far and even on the computer for a few days.

  I just went to the old iMac & this box pop up was there to greet me again. It says mail wants to use the login keychain, enter the Keychain password. I did it, but then noticed there had been no new messages received or sent so why he wanted the password that it has nothing to do with at least he did not use it to check for new messages only to find out it was not everything.

  I noticed that, just before all my mail is completely gone on the new mac pop box had the letters "DP" attached a strange place that made me think it was a con & malicious but at the time he had recorded in my brain, I had clicked on it in any case and it was too late.

  Another possible clue, it's that I noticed in preferences/e-mail accounts in that each e-mail account info from server in gray instead of the black box it should be & is on the old mac. Clearly, something is very wrong here.

  Anyone can shed light on this bizarre situation?

  And exactly how can I re - install mail etc?

  ziggyzig wrote:

  ...

  Just before this happened that a pop window appeared saying mail wanted my admin password....

  That should never happen. Mail requires only the password for an e-mail account.

  ... have caused all sorts of problems before with their 'technical help' people in India is a complete joke and behave as malicious Cowboys and never, ever, be able to help with anything at all.

  They demanded also that I realize sharing screen is totally unjustified and it may be that they inserted malware that my old mac began to behave badly, in addition to heating and slow down to a standstill. ...

  Are you sure that you spoke to BT for 100%? Did you research BT and contact them or have you answered a pop-up? It is possible that you have copied something nefarious on old Mac.